.TH SLAPD.CONF 5 "23 August 2000" "OpenLDAP LDVERSION" .\" $OpenLDAP$ .\" Copyright 1998-2000 The OpenLDAP Foundation All Rights Reserved. .\" Copying restrictions apply. See COPYRIGHT/LICENSE. .SH NAME slapd.conf \- configuration file for slapd, the stand-alone LDAP daemon .SH SYNOPSIS ETCDIR/slapd.conf .SH DESCRIPTION The file .B ETCDIR/slapd.conf contains configuration information for the .BR slapd (8) daemon. This configuration file is also used by the .BR slurpd (8) replication daemon and by the SLAPD tools .BR slapadd (8), .BR slapcat (8), and .BR slapindex (8). .LP The .B slapd.conf file consists of a series of global configuration options that apply to .B slapd as a whole (including all backends), followed by zero or more database backend definitions that contain information specific to a backend instance. .LP The general format of .B slapd.conf is as follows: .LP .nf # comment - these options apply to every database # first database definition & configuration options database # subsequent database definitions & configuration options ... .fi .LP As many backend-specific sections as desired may be included. Global options can be overridden in a backend (for options that appear more than once, the last appearance in the .B slapd.conf file is used). Blank lines and comment lines beginning with a `#' character are ignored. If a line begins with white space, it is considered a continuation of the previous line. .LP Arguments on configuration lines are separated by white space. If an argument contains white space, the argument should be enclosed in double quotes. If an argument contains a double quote (`"') or a backslash character (`\\'), the character should be preceded by a backslash character. .LP The specific configuration options available are discussed below in the Global Configuration Options, General Backend Options, LDBM Backend-Specific Options, Shell Backend-Specific Options, and Password Backend-Specific Options sections. Refer to the "OpenLDAP Administrator's Guide" for more details on the slapd configuration file. .SH GLOBAL CONFIGURATION OPTIONS Options described in this section apply to all backends, unless specifically overridden in a backend definition. Arguments that should be replaced by actual text are shown in brackets <>. .TP .B access to [ by ]+ Grant access (specified by ) to a set of entries and/or attributes (specified by ) by one or more requestors (specified by ). See the "OpenLDAP's Administrator's Guide" for details. .TP .B allow Specify a set of features (separated by white space) to allow (default none). .B tls_2_anon allows Start TLS to force session to anonymous status (see also .B disallow .BR tls_authc ). .TP .B argsfile The ( absolute ) name of a file that will hold the .B slapd server's command line options if started without the debugging command line option. .HP .hy 0 .B attributetype (\ [NAME\ ] [OBSOLETE]\ [DESC\ ]\ [SUP\ ] [EQUALITY\ ] [ORDERING\ ]\ [SUBSTR\ ] [SYNTAX\ ] [SINGLE\-VALUE] [COLLECTIVE]\ [NO\-USER\-MODIFICATION] [USAGE\ ]\ ) .RS Specify an attribute type using the LDAPv3 syntax defined in RFC 2252. The slapd parser extends the RFC 2252 definition by allowing string forms as well as numeric OIDs to be used for the attribute OID and attribute syntax OID. (See the .B objectidentifier description.) Currently the syntax name parser is case-sensitive. The known syntax names are: .RS .RS .PD 0 AttributeTypeDescription Audio Binary BitString Certificate CertificateList CertificatePair DN DeliveryMethod DirectoryString DITContentRuleDescription DITStructureRuleDescription EnhancedGuide FacsimileTelephoneNumber GeneralizedTime Guide IA5String Integer MatchingRuleDescription MatchingRuleUseDescription MailPreference NameAndOptionalUUID NameFormDescription NumericString ObjectClassDescription OID OtherMailbox OctetString PostalAddress ProtocolInformation PresentationAddress PrintableString SupportedAlgorithm TelephoneNumber TeletexTerminalIdentifier TelexNumber UTCTime LDAPSyntaxDescription SubstringAssertion NISnetgrouptriple Bootparameter .PD .RE .RE .RE .TP .B concurrency Specify a desired level of concurrency. Provided to the underlying thread system as a hint. The default is not to provdide any hint. .HP .B defaultaccess { none | auth | compare | search | read | write } .RS Specify the default access level to grant requestors when no access directives were provided for the database. The default behavior is to grant 'read' access. It is recommended that .B access directives be used instead. .RE .TP .B defaultsearchbase Specify a default search base to use when client submits a non-base search request with an empty base DN. .TP .B disallow Specify a set of features (separated by white space) to disallow (default none). .B bind_v2 disables acceptance of LDAPv2 bind requests. .B bind_anon disables acceptance of anonymous bind requests. .B bind_anon_cred disables anonymous bind creditials are not empty (e.g. when DN is empty). .B bind_anon_dn disables anonymous bind when DN is not empty. .B bind_simple disables simple (bind) authentication. .B bind_krbv4 disables Kerberos V4 (bind) authentication. .B tls_authc disables StartTLS if authenticated (see also .B allow .BR tls_2_anon ). .TP .B idletimeout Specify the number of seconds to wait before forcibly closing an idle client connections. A idletimeout of 0 disables this feature. The default is 0. .TP .B include Read additional configuration information from the given file before continuing with the next line of the current file. .TP .B loglevel Specify the level at which debugging statements and operation statistics should be syslogged (currently logged to the .BR syslogd (8) LOG_LOCAL4 facility). Log levels are additive, and available levels are: .RS .RS .PD 0 .TP .B 1 trace function calls .TP .B 2 debug packet handling .TP .B 4 heavy trace debugging .TP .B 8 connection management .TP .B 16 print out packets sent and received .TP .B 32 search filter processing .TP .B 64 configuration file processing .TP .B 128 access control list processing .TP .B 256 stats log connections/operations/results .TP .B 512 stats log entries sent .TP .B 1024 print communication with shell backends .TP .B 2048 entry parsing .PD .RE .RE .HP .B objectclass ( [NAME ] [DESC ] [{ ABSTRACT | STRUCTURAL | AUXILIARY }] [MUST ]\ [MAY ] ) .RS Specify an objectclass using the LDAPv3 syntax defined in RFC 2252. The slapd parser extends the RFC 2252 definition by allowing string forms as well as numeric OIDs to be used for the object class OID. (See the .B objectidentifier description.) Object classes are "STRUCTURAL" by default. .RE .TP .B objectidentifier { | [:] } Define a string name that equates to the given OID. The string can be used in place of the numeric OID in objectclass and attribute definitions. The name can also be used with a suffix of the form ":xx" in which case the value "oid.xx" will be used. .TP .B pidfile The ( absolute ) name of a file that will hold the .B slapd server's process ID ( see .BR getpid (2) ) if started without the debugging command line option. .TP .B password-hash The to use for userPassword generation. One of .BR {SSHA} , .BR {SHA} , .BR {SMD5} , .BR {MD5} , .BR {CRYPT} , .BR {KERBEROS} , .BR {SASL} , and .BR {UNIX} . The default is .BR {SSHA} . .TP .B referral Specify the referral to pass back when .BR slapd (8) cannot find a local database to handle a request. If specified multiple times, each url is provided. .TP .B require Specify a set of conditions (separated by white space) to require (default none). The directive may be specified globally and/or per-database. .B bind requires bind operation prior to directory operations. .B LDAPv3 requires session to be using LDAP version 3. .B authc requires authentication prior to directory operations. .B SASL requires SASL authentication prior to directory operations. .B strong requires strong authentication prior to directory operations. Currently .B SASL and .B strong conditions are currently same. .B none may be used to require no conditions (useful for clearly globally set conditions within a particular database). .TP .B sasl-host Used to specify the fully qualified domain name used for SASL processing. .TP .B sasl-realm Used to specify Cyrus SASL realm. .TP .B sasl-secprops Used to specify Cyrus SASL security properties. The .B none flag (without any other properities) causes the flag properites defaults ("noanonymous,noplain") to be cleared. The .B noplain flag disables mechanisms susceptible to simple passive attacks. The .B noactive flag disables mechanisms susceptible to active attacks. The .B nodict flag disables mechanisms susceptible to passive dictionary attacks. The .B noanonyous flag disables mechanisms which support anonymous login. The .B forwardsec flag require forward secrecy between sessions. The .B passcred require mechanisms which pass client credentials (and allow mechanisms which can pass credentials to do so). The .B minssf= property specifies the minimum acceptable .I security strength factor as an integer approximate to effective key length used for encryption. 0 (zero) implies no protection, 1 implies integrity protection only, 56 allows DES or other weak ciphers, 112 allows triple DES and other strong ciphers, 128 allows RC4, Blowfish and other modern strong ciphers. The default is 0. The .B maxssf= property specifies the maximum acceptable .I security strength factor as an integer (see minssf description). The default is INT_MAX. The .B maxbufsize= property specifies the maximum security layer receive buffer size allowed. 0 disables security layers. The default is 65536. .TP .B schemacheck { on | off } Turn schema checking on or off. The default is on. .TP .B security Specify a set of factors (separated by white space) to require. An integer value is associated with each factor and is roughly equivalent of the encryption key length to require. A value of 112 is equivalent to 3DES, 128 to Blowfish, etc.. The directive may be specified globally and/or per-database. .B ssf= specifies the overall security strength factor. .B transport= specifies the transport security strength factor. .B tls= specifies the TLS security strength factor. .B sasl= specifies the SASL security strength factor. .B update_ssf= specifies the overall security strength factor to require for directory updates. .B update_transport= specifies the transport security strength factor to require for directory updates. .B update_tls= specifies the TLS security strength factor to require for directory updates. .B update_sasl= specifies the SASL security strength factor to require for directory updates. Note that the .B transport factor is measure of security provided by the underlying transport, e.g. ldapi:// (and eventually IPSEC). It is not normally used. .TP .B sizelimit Specify the maximum number of entries to return from a search operation. The default size limit is 500. .TP .B srvtab Specify the srvtab file in which the kerberos keys necessary for authenticating clients using kerberos can be found. This option is only meaningful if you are using Kerberos authentication. .TP .B timelimit Specify the maximum number of seconds (in real time) require forward secrecy between sessions. .TP .B schemacheck { on | off } Turn schema checking on or off. The default is on. .TP .B sizelimit Specify the maximum number of entries to return from a search operation. The default size limit is 500. .TP .B sasl-realm Specify SASL realm. Default is empty. .TP .B sasl-secprops Cyrus SASL security properties. Default is "noanonymous,noplain". .TP .B srvtab Specify the srvtab file in which the kerberos keys necessary for authenticating clients using kerberos can be found. This option is only meaningful if you are using Kerberos authentication. .TP .B timelimit Specify the maximum number of seconds (in real time) .B slapd will spend answering a search request. The default time limit is 3600. .SH TLS OPTIONS If .B slapd is build with support for Transport Layer Security, there are more options you can specify. .TP .B TLSCipherSuite Permits configuring what ciphers will be accepted and the preference order. should be a cipher specification for OpenSSL. Example: TLSCipherSuite HIGH:MEDIUM:+SSLv2 To check what ciphers a given spec selects, use: openssl ciphers -v .TP .B TLSCertificateFile Specifies the file that contains the .B slapd server certificate. .TP .B TLSCertificateKeyFile Specifies the file that contains the .B slapd server private key that matches the certificate stored in the .B TLSCertificateFile file. Currently, the private key must not be protected with a password, so it is of critical importance that it is protected carefully. .SH GENERAL BACKEND OPTIONS Options in this section only apply to the configuration file section for the backend in which they are defined. They are supported by every type of backend. .TP .B database Mark the beginning of a new database instance definition. should be one of .B ldbm, .B shell, or .B passwd depending on which backend will serve the database. .TP .B lastmod on | off Controls whether .B slapd will automatically maintain the modifiersName, modifyTimestamp, creatorsName, and createTimestamp attributes for entries. By default, lastmod is on. .TP .B readonly on | off This option puts the database into "read-only" mode. Any attempts to modify the database will return an "unwilling to perform" error. By default, readonly is off. .HP .B replica host=[:port] bindmethod=simple|sasl .B [binddn=] [credentials=] .B [saslmech=] [authcId=] .RS Specify a replication site for this database. Refer to the "OpenLDAP Administrator's Guide" for detailed information on setting up a replicated .B slapd directory service. A .B bindmethod of .B simple requires the options .B binddn and .B credentials and should only be used when adequate security services (e.g TLS or IPSEC) are in place. A .B bindmethod of .B sasl requires the option .B saslmech. If the .B mechanism will use Kerberos, a kerberos instance should be given in .B authcId. .RE .TP .B replogfile Specify the name of the replication log file to log changes to. The replication log is typically written by .BR slapd (8) and read by .BR slurpd (8). See .BR slapd.replog (5) for more information. .TP .B rootdn Specify the distinguished name that is not subject to access control or administrative limit restrictions for operations on this database. This DN may or may not be associated with an entry. An empty root DN (the default) specifies no root access is to be granted. It is recommended that the rootdn only be specified when needed (such as when initially populating a database). .TP .B rootpw Specify a password (or hash of the password) for the rootdn. This option accepts all RFC 2307 userPassword formats known to the server (see .B password-hash desription) as well as cleartext. .BR slappasswd (8) may be used to generate a hash of a password. Cleartext and \fB{CRYPT}\fP passwords are not recommended. If empty (the default), authentication of the root DN is by other means (e.g. SASL). Use of SASL is encouraged. .TP .B suffix Specify the DN suffix of queries that will be passed to this backend database. Multiple suffix lines can be given and at least one is required for each database definition. .TP .B updatedn This option is only applicable in a slave .B slapd. It specifies the DN allowed to make changes to the replica (typically, this is the DN .BR slurpd (8) binds as when making changes to the replica). .TP .B updateref Specify the referral to pass back when .BR slapd (8) is asked to modify a replicated local database. If specified multiple times, each url is provided. .SH LDBM BACKEND-SPECIFIC OPTIONS Options in this category only apply to the LDBM backend database. That is, they must follow a "database ldbm" line and come before any subsequent "database" lines. The LDBM backend is a high-performance database that makes extensive use of indexing and caching to speed data access. .TP .B cachesize Specify the size in entries of the in-memory cache maintained by the LDBM backend database instance. The default is 1000 entries. .TP .B dbcachesize Specify the size in bytes of the in-memory cache associated with each open index file. If not supported by the underlying database method, this option is ignored without comment. The default is 100000 bytes. .TP .B dbnolocking Specify that no database locking should be performed. Enabling this option may improve performance at the expense of data security. .B dbnosync Specify that on-disk database contents should not be immediately synchronized with in memory changes. Enabling this option may improve performance at the expense of data security. .TP .B directory Specify the directory where the LDBM files containing this database and associated indexes live. A separate directory must be specified for each database. The default is .BR LOCALSTATEDIR/openldap-ldbm . .TP .B index {|default} [pres,eq,approx,sub,] Specify the indexes to maintain for the given attribute. If only an is given, the indices specified for \fBdefault\fR are maintained. A number of special index parameters may be specified. The index type .B sub can be decomposed into .BR subinitial , .BR subany ,\ and .B subfinal indices. The special type .B lang may be specified to allow use of this index by language subtypes. The special type .B autolang may be specified to automatically maintain separate indices for each language subtypes. The special type .B subtypes may be specified to allow use of this index by named subtypes. The special type .B autosubtypes may be specified to automatically maintain separate indices for each other subtypes. .TP .B mode Specify the file protection mode that newly created database index files should have. The default is 0600. .SH SHELL BACKEND-SPECIFIC OPTIONS Options in this category only apply to the SHELL backend database. That is, they must follow a "database shell" line and come before any subsequent "database" lines. The Shell backend executes external programs to implement operations, and is designed to make it easy to tie an existing database to the .B slapd front-end. .TP .B bind .TP .B unbind .TP .B search .TP .B compare .TP .B modify .TP .B modrdn .TP .B add .TP .B delete .TP .B abandon These options specify the pathname of the command to execute in response to the given LDAP operation. .LP Note that you need only supply configuration lines for those commands you want the backend to handle. Operations for which a command is not supplied will be refused with an "unwilling to perform" error. .SH PASSWORD BACKEND-SPECIFIC OPTIONS Options in this category only apply to the PASSWD backend database. That is, they must follow a "database passwd" line and come before any subsequent "database" lines. The PASSWD database serves up the user account information listed in the system .BR passwd (5) file. .TP .B file Specifies an alternate passwd file to use. The default is .B /etc/passwd. .SH EXAMPLE "OpenLDAP Administrator's Guide" contains an annotated example of a configuration file. .SH FILES ETCDIR/slapd.conf .SH SEE ALSO .BR ldap (3), .BR slapd.replog (5), .BR locale (5), .BR passwd (5), .BR slapd (8), .BR slapadd (8), .BR slapcat (8), .BR slapindex (8), .BR slappassword (8), .BR slurpd (8), .LP "OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/) .SH ACKNOWLEDGEMENTS .B OpenLDAP is developed and maintained by The OpenLDAP Project (http://www.openldap.org/). .B OpenLDAP is derived from University of Michigan LDAP 3.3 Release.