(L)MDB updates

doc/guide/admin/appendix-common-errors.sdf

@@ -587,10 +587,10 @@ Some times, `make test' fails at the very first test with an obscure message lik
 >    make test
 >    make[1]: Entering directory `/ldap_files/openldap-2.4.6/tests'
 >    make[2]: Entering directory `/ldap_files/openldap-2.4.6/tests'
->    Initiating LDAP tests for BDB...
+>    Initiating LDAP tests for MDB...
 >    Cleaning up test run directory leftover from previous run.
 >     Running ./scripts/all...
->    >>>>> Executing all LDAP tests for bdb
+>    >>>>> Executing all LDAP tests for mdb
 >    >>>>> Starting test000-rootdse ...
 >    running defines.sh
 >    Starting slapd on TCP/IP port 9011...
@@ -606,7 +606,7 @@ Some times, `make test' fails at the very first test with an obscure message lik
 >    ldap_sasl_bind_s: Can't contact LDAP server (-1)
 >    >>>>> Test failed
 >    >>>>> ./scripts/test000-rootdse failed (exit 1)
->    make[2]: *** [bdb-yes] Error 1
+>    make[2]: *** [mdb-yes] Error 1
 >    make[2]: Leaving directory `/ldap_files/openldap-2.4.6/tests'
 >    make[1]: *** [test] Error 2
 >    make[1]: Leaving directory `/ldap_files/openldap-2.4.6/tests'

doc/guide/admin/aspell.en.pws

@@ -1688,3 +1688,5 @@ uidNumber
 CA's
 CAs
 namingContext
+mdb
+lmdb

doc/guide/admin/backends.sdf

@@ -37,7 +37,7 @@ Note: An {{hdb}} database needs a large {{idlcachesize}} for good search perform
 typically three times the {{cachesize}} (entry cache size) or larger.
 
 Note: The {{hdb}} backend has superseded the {{bdb}} backend, and both will
-soon be deprecated in favor of the new {{mdb}} backend. See below.
+are deprecated in favor of the new {{mdb}} backend. See below.
 
 H3: back-bdb/back-hdb Configuration
 

doc/guide/admin/install.sdf

@@ -114,7 +114,11 @@ Kerberos, is highly recommended.
 
 H3: Database Software
 
-OpenLDAP's {{slapd}}(8) {{TERM:BDB}} and {{TERM:HDB}} primary database backends
+OpenLDAP's {{slapd}}(8) {{TERM:MDB}} primary database backend uses the {{LMDB}}
+software included with the OpenLDAP source.  There is no need to download any
+additional software to have {{MDB}} support.
+
+OpenLDAP's {{slapd}}(8) {{TERM:BDB}} and {{TERM:HDB}} depricated database backends
 require {{ORG[expand]Oracle}} {{PRD:Berkeley DB}}.
 If not available at configure time, you will not be able to build
 {{slapd}}(8) with these primary database backends.
@@ -130,7 +134,7 @@ download page
 
 There are several versions available. Generally, the most recent
 release (with published patches) is recommended. This package is required
-if you wish to use the {{TERM:BDB}} or {{TERM:HDB}} database backends.
+if you wish to use the deprecated {{TERM:BDB}} or {{TERM:HDB}} database backends.
 
 Note: Please see {{SECT:Recommended OpenLDAP Software Dependency Versions}} for
 more information.
@@ -185,7 +189,7 @@ variables.
 >	./configure [options] [variable=value ...]
 
 As an example, let's assume that we want to install OpenLDAP with
-BDB backend and TCP Wrappers support.  By default, BDB
+MDB backend and TCP Wrappers support.  By default, MDB
 is enabled and TCP Wrappers is not.  So, we just need to specify
 {{EX:--enable-wrappers}} to include TCP Wrappers support:
 

doc/guide/admin/maintenance.sdf

@@ -14,7 +14,13 @@ Backup strategies largely depend on the amount of change in the database
 and how much of that change an administrator might be willing to lose in a 
 catastrophic failure. There are two basic methods that can be used:
 
-1. Backup the Berkeley database itself and periodically back up the transaction 
+1. Backup the LMDB database itself
+
+The LMDB database can be copied live using the mdb_copy command.  If the database
+is a sparse file via the use of the "writemap" environment flag, the resulting
+copy will be the actual size of the database rather than a sparse copy.
+
+2. Backup the Berkeley database itself and periodically back up the transaction 
 log files:
 
 Berkeley DB produces transaction logs that can be used to reconstruct
@@ -30,7 +36,7 @@ copied offsite. This method affords good protection, with minimal space
 overhead.
 
 
-2. Periodically run slapcat and back up the LDIF file:
+3. Periodically run slapcat and back up the LDIF file:
 
 Slapcat can be run while slapd is active. However, one runs the risk of an
 inconsistent database- not from the point of slapd, but from the point of
@@ -46,13 +52,11 @@ files can be rather large and the accumulation of the day's backups could
 add up to a substantial amount of space.
 
 You can use {{slapcat}}(8) to generate an LDIF file for each of your {{slapd}}(8) 
-back-bdb or back-hdb databases.
+back-mdb, back-bdb, or back-hdb databases.
 
 >    slapcat -f slapd.conf -b "dc=example,dc=com"
 
-For back-bdb and back-hdb, this command may be ran while slapd(8) is running.
+For back-mdb, back-bdb, and back-hdb, this command may be ran while slapd(8) is running.
-
-MORE on actual Berkeley DB backups later covering db_recover etc.
 
 H2: Berkeley DB Logs
 

doc/guide/admin/monitoringslapd.sdf

@@ -216,6 +216,7 @@ backends, as well as backends loaded by modules.  For example:
 >	monitoredInfo: monitor
 >	monitoredInfo: bdb        
 >	monitoredInfo: hdb
+>	monitoredInfo: mdb
 
 This indicates the {{config}}, {{ldif}}, {{monitor}}, {{bdb}},
 and {{hdb}} backends are available.
@@ -267,11 +268,24 @@ contains information about a particular backend.  For example:
 >	supportedControl: 1.3.6.1.4.1.4203.1.10.1
 >	supportedControl: 1.2.840.113556.1.4.1413
 >	supportedControl: 1.3.6.1.4.1.4203.666.11.7.2
+>
+>	dn: cn=Backend 5,cn=Backends,cn=Monitor
+>	monitoredInfo: mdb
+>	monitorRuntimeConfig: TRUE
+>	supportedControl: 1.3.6.1.1.12
+>	supportedControl: 2.16.840.1.113730.3.4.2
+>	supportedControl: 1.3.6.1.4.1.4203.666.5.2
+>	supportedControl: 1.2.840.113556.1.4.319
+>	supportedControl: 1.3.6.1.1.13.1
+>	supportedControl: 1.3.6.1.1.13.2
+>	supportedControl: 1.3.6.1.4.1.4203.1.10.1
+>	supportedControl: 1.2.840.113556.1.4.1413
+>	supportedControl: 1.3.6.1.4.1.4203.666.11.7.2
 
 For each of these objects, monitorInfo indicates which backend the
 information in the object is about.  For instance, the {{EX:cn=Backend
-3,cn=Backends,cn=Monitor}} object contains (in the example) information
+5,cn=Backends,cn=Monitor}} object contains (in the example) information
-about the {{bdb}} backend. 
+about the {{mdb}} backend. 
 
 !block table
 Attribute|Description