mirror/openldap
2
0
Fork 0
mirror of https://git.openldap.org/openldap/openldap.git synced 2024-12-21 03:10:25 +08:00
Code Issues Packages Projects Releases Wiki Activity
c842bf8b80
openldap/doc/drafts/draft-zeilenga-ldap-namedref-xx.txt

676 lines
24 KiB
Plaintext
Raw Normal View History

Replace expired LDAPext namedref I-D with Zeilenga namedref I-D. Add LDAPext refer I-D.
2000-07-19 09:24:06 +08:00
INTERNET-DRAFT Kurt D. Zeilenga
Intended Category: Standard Track OpenLDAP Foundation
Expires: 4 January 2001 4 July 2000
Named References in LDAP Directories
<draft-zeilenga-ldap-namedref-00.txt>
1. Status of this Memo
This document is an Internet-Draft and is in full conformance with all
provisions of Section 10 of RFC2026.
This document is intended to be, after appropriate review and
revision, submitted to the RFC Editor as a Standard Track document.
Distribution of this memo is unlimited. Technical discussion of this
document will take place on the IETF LDAP Extension Working Group
mailing list <ietf-ldapext@netscape.com>. Please send editorial
comments directly to the author <Kurt@OpenLDAP.org>.
Internet-Drafts are working documents of the Internet Engineering Task
Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as ``work in progress.''
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft
Shadow Directories can be accessed at http://www.ietf.org/shadow.html.
Copyright 2000, The Internet Society. All Rights Reserved.
Please see the Copyright section near the end of this document for
more information.
2. Abstract
This document defines schema and protocol elements for representing
and manipulating generic knowledge information in LDAP [RFC2251]
directories. An attribute type "ref" is used to store URIs [RFC1738]
which may refer to LDAP and non-LDAP services. An object class
"referral" is used to construct entries in an LDAP directory which
references to other directories or services. An control, ManageDsaIT,
is defined to allow clients to manipulate referral objects as normal
entries. The document describes procedures directory servers should
follow when supporting these elements.
Zeilenga [Page 1]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
3. Background and intended usage
The broadening of interest in LDAP directories beyond their use as
front ends to X.500 directories has created a need to represent
knowledge information in a more general way. Knowledge information is
information about one or more servers maintained in another server,
used to link servers and services together.
This document defines a general method of representing knowledge
information in LDAP directories, based on URIs.
This document does not detail client processing of referral and search
reference responses. This is detailed in RFC 2251 or subsequent
documents.
The key words "SHALL", "SHALL NOT", "MUST", "MUST NOT", "SHOULD",
"SHOULD NOT", "MAY" and "MAY NOT" used in this document are to be
interpreted as described in [RFC2119].
4. Schema
4.1 The ref attribute type
This section defines the ref attribute type for holding general
knowledge reference information.
( 2.16.840.1.113730.3.1.34
NAME 'ref'
DESC 'URI reference'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26
USAGE distributedOperation )
The ref attribute type has IA5 syntax and is case sensitive. The ref
attribute is multi valued. Values placed in the attribute MUST conform
to the specification given for the labeledURI attribute defined in
[RFC2079]. The labeledURI specification defines a format that is a
URI, optionally followed by whitespace and a label. This document does
not make use of the label portion of the syntax. Future documents MAY
enable new functionality by imposing additional structure on the label
portion of the syntax as it appears in the ref attribute.
If the URI contained in a ref attribute value refers to an LDAPv3
server, it MUST be in the LDAP URI scheme described in [RFC2255].
Other URI schemes MAY be used but MUST refer to services which are
capable of completing operations referred to the services. The URI
values, regardless of scheme, contained in a ref attribute must point
Zeilenga [Page 2]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
to services which are equally capable of handling operations refer to
said services.
The integrity of the URI SHALL NOT be validated by the server holding
or returning the reference.
When returning a referral result, the server MUST NOT return the label
portion of the labeledURI as part of the referral. Only the URI
portion of the ref attribute SHOULD be returned.
The ref attribute SHOULD NOT be used for naming.
4.2. The referral object class
The referral object class is defined as follows.
( 2.16.840.1.113730.3.2.6
NAME 'referral'
DESC 'named reference object'
STRUCTURAL MUST ref )
The referral object class is a structural object class used to
represent a named reference in the directory. The referral object
class SHOULD be used in conjunction with the extensibleObject object
class to support the naming attributes used in the entry's
distinguished name.
In the presence of a ManageDsaIT control, referral objects are treated
as normal entries. Note that the ref attribute is operational and
will only returned in a search entry response when requested.
In the absence of a ManageDsaIT control, referral objects contents are
used to construct referrals and search references and, as such, the
referral entries themselves are general visible to clients.
5. Use of the ref attribute
Two uses the ref attribute is defined in this document. The first
use, in conjunction with the referral object class, represents a named
reference. The second use, in conjunction with the Root DSE,
represents superior reference. The following sections detail these
usages of the ref attribute.
Other uses of the ref attribute MAY be defined in subsequent
documents, or by bilateral agreement between cooperating clients and
servers and SHOULD be defined in conjunction with an object class
Zeilenga [Page 3]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
indicating the usage.
5.1. Named reference
A named reference is used to facilitate distributed name resolution or
search across multiple servers. The ref attribute appears in an
referral object (an entry with object class of referral) named in the
referencing server. The value of the ref attribute points to the
corresponding entry maintained in the referenced server.
While the distinguished name in a value of the ref attribute is
typically that of an entry in a naming context below the naming
context held by the referencing server, it is permitted to be the
distinguished name of any entry. If the ref attribute is multi-valued
all the DNs in the values of the ref attribute SHOULD have the same
value. Administrators SHOULD avoid configuring naming loops using
referrals.
The URI SHOULD NOT explicitly define a scope and the server SHOULD NOT
explicitly add a scope to the URI before returning it to the client as
a referral or search reference as the scope is implied by the
operation.
Named references MUST be treated as normal entries if the request
includes the ManageDsaIT control. The remainder of this section
describes processing of requests which do not include the ManageDsaIT
control.
5.1.1. Scenarios
The following sections contain specifications of how referral objects
should be used in different scenarios followed by examples that
illustrate that usage. The scenarios described consist of referral
operation when finding target of a non-search operation, when finding
the base of a search operation, and when generating search references.
It is to be noted that, in this document, a search operation is
conceptually divided into two distinct, sequential phases: (1) finding
the base object where the search is to begin, and (2) performing the
search itself. The operation of the server with respect to referrals
in phase (1) is similar to the operation of the server while finding
the target object for a non-search operations.
It is to also be noted that the ref attribute may have multiple values
and, where these sections refer to a single ref attribute value,
multiple ref attribute values may be substituted and SHOULD be
Zeilenga [Page 4]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
processed and returned as a group in a referral or search reference in
the same way as described for a single ref attribute value.
Search references returned for a given request may be returned in any
order.
5.1.1.1. Example configuration
|------------------------------------------------------------|
| Server A |
| dn: o=abc,c=us dn: o=xyz,c=us |
| o: abc o: xyz |
| ref: ldap://hostB/o=abc,c=us ref: ldap://hostD/o=xyz,c=us |
| ref: ldap://hostC/o=abc,c=us objectclass: referral |
| objectclass: referral objectclass: extensibleObject|
| objectclass: extensibleObject |
|____________________________________________________________|
|------------------| |------------------| |------------------|
| Server B | | Server D | | Server C |
| dn: o=abc,c=us | | dn: o=xyz,c=us | | dn: o=abc,c=us |
| o: abc | | o: xyz | | o: abc |
| other attributes | | other attributes | | other attributes |
|__________________| |__________________| |__________________|
In this example, Server A holds references for two entries:
"o=abc,c=us" and "o=xyz,c=us". For the "o=abc,c=us" entry, Server A
holds two references, one to Server B and one to Server C. The
entries referenced are replicas of each other. For the "o=xyz,c=us"
entry, Server A holds a single reference to the entry contained in
Server D.
In the following protocol interaction examples, the client has
contacted Server A. Server A holds the naming context "c=us".
5.1.1.2. Base or Target object considerations
As previously described, the process of generating referrals for a
search can be described in two phases. The first, which is described
in this section, is generating referrals based on the base object
specified in the search. This process is similar to the process of
generating referrals based on the target object while processing other
operations (modify, add, delete, modify DN, and compare) with the sole
exception that for these other operations, the DN in the referral must
be modified in some cases.
Zeilenga [Page 5]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
If a client requests any of these operations, there are four cases
that the server must handle with respect to the base or target object
specified in the request.
Case 1: The base or target object is not held by the server and is not
within or subordinate to any naming context nor is subordinate to any
referral object held by the server.
The handling of this case is described in section 6.
Case 2: The base or target object is held by the server and is a
referral object.
In this case, if the type of operation requested is a search or the
URI contained in the ref attribute of the requested base object is NOT
an LDAP URI, the server SHOULD return the URI value contained in the
ref attribute of the base object whose DN is the DN requested by the
client as the base for the operation.
Example:
If the client issues a search in which the base object is
"o=xyz,c=us", server A will return
SearchResultDone "referral" {
ldap://hostD/o=xyz,c=us
}
If the type of operation requested is not a search and the URI
contained in the ref attribute of the requested target object is an
LDAP URI, the server SHOULD return a modified form of this URI. The
returned URI MUST have only the protocol, host, port, and trailing "/"
portion of the URI contained in the ref attribute. The server SHOULD
strip any DN, attributes, scope, and filter parts of the URI.
Example:
If the client issues a modify request for the target object of
"o=abc,c=us", server A will return
ModifyResponse "referral" {
ldap://hostB/
ldap://hostC/
}
Case 3: The base or target object is not held by the server, but is
object where the nearest naming context contains no referral object
which the base or target object is subordinate to.
Zeilenga [Page 6]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
In the context of this document, the nearest naming context means the
deepest context which the object is within. That is, if the object is
within multiple naming contexts, the nearest naming context the one
which is subordinate to all other naming contexts the object is
within.
If the nearest naming context contains no referral object which the
base or target object is subordinate to the request, request SHOULD be
process normally as appropriate for a nonexistent base or target
object (generally return noSuchObject).
Case 4: The base or target object is not held by the server, but is
object where the nearest naming context contains a referral object
which the base or target object is subordinate to.
As noted above, the nearest naming context means the deepest context
which the object is within.
If a client requests an operation for which the base or target object
is not held by the server but the nearest naming context contains a
referral object which the base or target object is subordinate to, the
server MUST return a referral response which contains referral values
constructed from the URI components of ref attribute values of the
referral object.
For each ref attribute value, if the URI component is not an LDAP
URIs, it SHOULD be returned as-is. If URI component is an LDAP URI,
the URI MUST be modified, regardless of the type of operation, as case
2 describes for a non-search request. That is, the DN, attributes,
scope, and filter parts of the URI MUST be stripped from the returned
URI.
Example:
If the client issues an add request where the target object has a DN
of "cn=Chris Lukas,o=abc,c=us", server A will return
AddResponse "referral" {
ldap://hostB/
ldap://hostC/
}
5.1.1.3. Search with one level or subtree scope
For search operations, once the base object has been found and
determined not to be a referral object, the search may progress. Any
entries matching the filter and scope of the search which is not a
Zeilenga [Page 7]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
referral object are returned to the client normally as described in
[RFC2251].
For each referral object within the requested scope, regardless of the
filter, the server SHOULD return a SearchResultReference which is
constructed from the URI component of values of the ref attribute. If
the URI component is not an LDAP URI, it should be returned as is. If
the URI component is an LDAP URI, the URI must be modified to remove
any explicit scope specifier.
One Level Example:
If a client requests a one level search of "c=US" then, in addition to
any entries one level below the "c=US" naming context matching the
filter (shown below as "... SearchResultEntry responses ..."), the
server will also return search references for any referral object
within the scope of the search.
The order of the SearchResultEntry responses and the
SearchResultReference responses is undefined. One possible sequence
is shown.
... SearchResultEntry responses ...
SearchResultReference {
ldap://hostB/o=abc,c=us
ldap://hostC/o=abc,c=us
}
SearchResultReference {
ldap://hostD/o=xyz,c=us
}
SearchResultDone "success"
Subtree Example:
If a client requests a subtree search of "c=us", then in addition to
any entries in the "c=us" naming context which match the filter,
Server A will also return two continuation references. As described in
the preceding section, the order of the responses is not defined.
One possible response might be:
SearchResultReference {
ldap://hostB/o=abc,c=us
ldap://hostC/o=abc,c=us
Zeilenga [Page 8]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
}
... SearchResultEntry responses ...
SearchResultReference {
ldap://hostD/o=xyz,c=us
}
SearchResultDone "success"
6. Superior Reference
An LDAP server may be configured to return a superior reference in the
case where the requested base or target object is not contained within
or subordinate to a naming context held by the server or referral
object.
An LDAP server's root DSE MAY contain a ref attribute. The values of
the ref attribute in the root DSE that are LDAP URIs SHOULD NOT
contain any DN part nor other search parameters (scope, filter,
attribute list). They MUST include the URI hostpart.
If the LDAP server's root DSE contains a ref attribute and a client
requests a target or base object not held by the server and not
contained within or subordinate to any naming context held by the
server or referral object, the server MUST return the URI component of
the values in the ref attribute of the root DSE as illustrated in the
example.
If the LDAP server's root DSE does not contain a ref attribute, the
server may return referral result with or more URIs determined via an
appropriate method, return noSuchObject, or other appropriate
resultCode.
The presence of the ref attribute within the root DSE SHALL NOT cause
operations upon the root DSE to generate a referral.
Example:
If a client requests a subtree search of "c=de" from server A in the
example configuration, and server A has the following ref attribute
defined in it's root DSE:
ref: ldap://hostG/
then server A will return
Zeilenga [Page 9]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
SearchResultDone "referral" {
ldap://hostG/
}
8. The ManageDsaIT control
The ManageDsaIT control indicates that the operation has been
requested so that the DSA (server) Information Tree is managed. The
controls causes DSEs, regardless of type, to be treated as normal
entries allowing clients to interrogate and update these entries using
LDAP operations. This control is analogous to the ManageDsaIT option
described in X.511(93) [X.511].
A client MAY specify the following control when issuing an add,
compare, delete, modify, modifyDN, search request or an extended
operation for which the control is defined.
The control type is 2.16.840.1.113730.3.4.2. The control criticality
may be TRUE or FALSE. There is no value; the controlValue field is
absent.
When present in the request, the server SHALL NOT generate a referral
or continuation reference for any referral object and instead perform
treat the referral object as an normal entry. When not present,
referral objects SHALL be handled as described above.
The control MAY cause other objects to be treated as normal entries as
defined by subsequent documents.
9. Relationship to X.500 Knowledge References
The X.500 standard defines several types of knowledge references, used
to bind together different parts of the X.500 namespace. In X.500,
knowledge references can be associated with a set of unnamed entries
(e.g., a reference, associated with an entry, to a server containing
the descendants of that entry).
This creates a potential problem for LDAP clients resolving an LDAPv3
URI referral referring to an LDAP directory back-ended by X.500.
Suppose the search is a subtree search, and that server A holds the
base object of the search, and server B holds the descendants of the
base object. The behavior of X.500(1993) subordinate references is
that the base object on server A is searched, and a single
continuation reference is returned pointing to all of the descendants
held on server B.
Zeilenga [Page 10]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
An LDAP URI only allows the base object to be specified. It is not
possible using standard LDAP URIs to indicate a search of several
entries whose names are not known to the server holding the superior
entry.
X.500 solves this problem by having two fields, one indicating the
progress of name resolution and the other indicating the target of the
search. In the above example, name resolution would be complete by the
time the query reached server B, indicating that it should not refer
the request.
This document does not address this problem. This problem will be
addressed in separate documents which define the changes to the X.500
distribution model and LDAPv3 extensions to indicate the progress of
name resolution.
10. Security Considerations
This document defines mechanisms that can be used to "glue" LDAP (and
other) servers together. The information used to specify this glue
information should be protected from unauthorized modification. If
the server topology information itself is not public information, the
information should be protected from unauthorized access as well.
11. References
[RFC1738] Berners-Lee, T., Masinter, L., and McCahill, M., "Uniform
Resource Locators (URL)", RFC 1738, CERN, Xerox Corporation,
University of Minnesota, December 1994.
[RFC2079] M. Smith, "Definition of an X.500 Attribute Type and an
Object Class to Hold Uniform Resource Identifiers (URIs)",
RFC 2079, January 1997.
[RFC2119] S. Bradner, "Key Words for use in RFCs to Indicate
Requirement Levels", RFC 2119 (Also BCP0014), March 1997.
[RFC2251] M. Wahl, T. Howes, S. Kille, "Lightweight Directory Access
Protocol (v3)", RFC 2251, December 1997.
[RFC2255] T. Howes, M. Smith, "The LDAP URL Format", RFC 2255,
December, 1997.
[X.500] ITU-T Rec. X.501, "The Directory: Models", 1993.
[X.511] ITU-T Rec. X.511, "The Directory: Abstract Service
Zeilenga [Page 11]
INTERNET-DRAFT draft-zeilenga-ldap-namedref-00 4 July 2000
Definition", 1993.
12. Acknowledgments
This document is borrows heavily from previous work by IETF LDAPext
working group. In particular, this document is based upon "Named
Referral in LDAP Directories" (a work in progress) by Christopher
Lukes, Tim Howes, Michael Roszkowski, Mark C. Smith, and Mark Wahl.
13. Author's Address
Kurt D. Zeilenga
OpenLDAP Foundation
<Kurt@OpenLDAP.org>
This draft expires 4 Jan. 2001.
Zeilenga [Page 12]
Reference in New Issue Copy Permalink