openldap/doc/drafts/draft-zeilenga-ldap-opattrs-xx.txt

INTERNET-DRAFT                                      Kurt D. Zeilenga
Intended Category: Standard Track                   OpenLDAP Foundation
Expires in six months                               17 May 2002



                    LDAPv3: All Operational Attributes
                   <draft-zeilenga-ldap-opattrs-03.txt>


Status of this Memo

  This document is an Internet-Draft and is in full conformance with all
  provisions of Section 10 of RFC2026.

  This document is intended to be, after appropriate review and
  revision, submitted to the RFC Editor as a Standard Track document.
  Distribution of this memo is unlimited.  Technical discussion of this
  document will take place on the IETF LDAP Extensions Working Group
  mailing list <ietf-ldapext@netscape.com>.  Please send editorial
  comments directly to the author <Kurt@OpenLDAP.org>.

  Internet-Drafts are working documents of the Internet Engineering Task
  Force (IETF), its areas, and its working groups.  Note that other
  groups may also distribute working documents as Internet-Drafts.
  Internet-Drafts are draft documents valid for a maximum of six months
  and may be updated, replaced, or obsoleted by other documents at any
  time.  It is inappropriate to use Internet-Drafts as reference
  material or to cite them other than as ``work in progress.''

  The list of current Internet-Drafts can be accessed at
  <http://www.ietf.org/ietf/1id-abstracts.txt>. The list of
  Internet-Draft Shadow Directories can be accessed at
  <http://www.ietf.org/shadow.html>.

  Copyright 2002, The Internet Society.  All Rights Reserved.

  Please see the Copyright section near the end of this document for
  more information.


Abstract

  The Lightweight Directory Access Protocol (LDAP) supports a mechanism
  for requesting the return of all user attributes but does not all
  operational attributes.   This document describes an LDAP extension
  which clients may use to request the return of all operational
  attributes.



Zeilenga                    LDAP All Op Attrs                   [Page 1]

INTERNET-DRAFT       draft-zeilenga-ldap-opattrs-03          17 May 2002


1.  Overview

  X.500 [X.500] provides a mechanism for clients to request all
  operational attributes be returned with entries provided in response
  to a search operation.   This mechanism is often used by clients to
  discover which operational attributes are present in an entry.

  This documents extends LDAP [RFC2251] to provide a simple mechanism
  which clients may use to request the return of all operation
  attributes.  The mechanism is designed for use with existing general
  purpose LDAP clients (including web browsers which support LDAP URLs)
  and existing LDAP API.

  The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
  "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
  document are to be interpreted as described in BCP 14 [RFC2119].


2.  All Operational Attributes

  The presence of the attribute description "+" (ASCII 43) in the list
  of attributes in a Search Request SHALL signify a request for the
  return of all operational attributes.

  As with all search requests, client implementors should note that
  results may not include all requested attributes due to access
  controls or other restrictions.  Clients implementors should also note
  that certain operational attributes may be returned only if requested
  by name even when "+" is present.  This is because some operational
  attributes are very expensive to return.

  Servers supporting this feature SHOULD publish the Object Identifier
  1.3.6.1.4.1.4203.1.5.1 as a value of the supportedFeatures [FEATURES]
  attribute in the root DSE.


3.  Interoperability Considerations

  This mechanism is specifically designed to allow users to request all
  operational attributes using existing LDAP clients.  In particular,
  the mechanism is designed to be compatible with existing general
  purpose LDAP clients includes web browsers which support LDAP URLs
  [RFC2255].

  The addition of this mechanism to LDAPv3 is believed not to cause any
  significant interoperability issues (this has been confirmed through
  testing).   Servers which have yet to implement this specification
  should ignore the "+" as an unrecognized attribute description per



Zeilenga                    LDAP All Op Attrs                   [Page 2]

INTERNET-DRAFT       draft-zeilenga-ldap-opattrs-03          17 May 2002


  [RFC2251, Section 4.5.1].  From the client's perspective, a server
  which does not return all operational attributes when "+" is requested
  should be viewed as having other restrictions.

  It is also noted that this mechanism is believed to require no
  modification of existing LDAP APIs.


4.  Security Considerations

  This document provides a mechanism which clients may use to discover
  operational attributes.  Those relying on security by obscurity SHOULD
  implement appropriate access controls to restricts access to
  operational attributes per local policy.


5.  IANA Considerations

  No IANA assignments are requested.

  This document uses the OID 1.3.6.1.4.1.4203.1.5.1 to identify the
  feature described above.  This OID was assigned [ASSIGN] by OpenLDAP
  Foundation under its IANA assigned private enterprise allocation
  [PRIVATE] for use in this specification.


6.  Acknowledgment

  The "+" mechanism is believed to have been first suggested by Bruce
  Greenblatt in a November 1998 post to the IETF LDAPext Working Group
  mailing list.


7.  Author's Address

  Kurt D. Zeilenga
  OpenLDAP Foundation
  <Kurt@OpenLDAP.org>


8. Normative References

  [RFC2119] S. Bradner, "Key words for use in RFCs to Indicate
            Requirement Levels", BCP 14 (also RFC 2119), March 1997.

  [RFC2251] M. Wahl, T. Howes, S. Kille, "Lightweight Directory Access
            Protocol (v3)", RFC 2251, December 1997.




Zeilenga                    LDAP All Op Attrs                   [Page 3]

INTERNET-DRAFT       draft-zeilenga-ldap-opattrs-03          17 May 2002


  [FEATURES] K. Zeilenga, "Feature Discovery in LDAP", draft-zeilenga-
            ldap-features-xx.txt (a work in progress).


9. Informative References

  [RFC2255] T. Howes and M. Smith, "The LDAP URL Format", RFC 2255,
            December 1997.

  [X.500]   ITU-T Rec. X.500, "The Directory: Overview of Concepts,
            Models and Service", 1993.

  [ASSIGN]  OpenLDAP Foundation, "OpenLDAP OID Delegations",
            http://www.openldap.org/foundation/oid-delegate.txt.

  [PRIVATE] IANA, "Private Enterprise Numbers",
            http://www.iana.org/assignments/enterprise-numbers.


Copyright 2002, The Internet Society.  All Rights Reserved.

  This document and translations of it may be copied and furnished to
  others, and derivative works that comment on or otherwise explain it
  or assist in its implementation may be prepared, copied, published and
  distributed, in whole or in part, without restriction of any kind,
  provided that the above copyright notice and this paragraph are
  included on all such copies and derivative works.  However, this
  document itself may not be modified in any way, such as by removing
  the copyright notice or references to the Internet Society or other
  Internet organizations, except as needed for the  purpose of
  developing Internet standards in which case the procedures for
  copyrights defined in the Internet Standards process must be followed,
  or as required to translate it into languages other than English.

  The limited permissions granted above are perpetual and will not be
  revoked by the Internet Society or its successors or assigns.

  This document and the information contained herein is provided on an
  "AS IS" basis and THE AUTHORS, THE INTERNET SOCIETY, AND THE INTERNET
  ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
  INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
  INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
  WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.








Zeilenga                    LDAP All Op Attrs                   [Page 4]