Appendix C. NetCDF Error Code Listing {#nc-error-codes} ================== \tableofcontents # NetCDF-3 Error Codes {#nc3-error-codes} ~~~~ #define NC_NOERR 0 // No Error #define NC_EBADID (-33) // Not a netcdf id #define NC_ENFILE (-34) // Too many netcdfs open #define NC_EEXIST (-35) // netcdf file exists && NC_NOCLOBBER #define NC_EINVAL (-36) // Invalid Argument #define NC_EPERM (-37) // Write to read only #define NC_ENOTINDEFINE (-38) // Operation not allowed in data mode #define NC_EINDEFINE (-39) // Operation not allowed in define mode #define NC_EINVALCOORDS (-40) // Index exceeds dimension bound #define NC_EMAXDIMS (-41) // NC_MAX_DIMS exceeded [not enforced after 4.5.0] #define NC_ENAMEINUSE (-42) // String match to name in use #define NC_ENOTATT (-43) // Attribute not found #define NC_EMAXATTS (-44) // NC_MAX_ATTRS exceeded [not enforced after 4.5.0] #define NC_EBADTYPE (-45) // Not a netcdf data type #define NC_EBADDIM (-46) // Invalid dimension id or name #define NC_EUNLIMPOS (-47) // NC_UNLIMITED in the wrong index #define NC_EMAXVARS (-48) // NC_MAX_VARS exceeded [not enforced after 4.5.0] #define NC_ENOTVAR (-49) // Variable not found #define NC_EGLOBAL (-50) // Action prohibited on NC_GLOBAL varid #define NC_ENOTNC (-51) // Not a netcdf file #define NC_ESTS (-52) // In Fortran, string too short #define NC_EMAXNAME (-53) // NC_MAX_NAME exceeded #define NC_EUNLIMIT (-54) // NC_UNLIMITED size already in use #define NC_ENORECVARS (-55) // nc_rec op when there are no record vars #define NC_ECHAR (-56) // Attempt to convert between text & numbers #define NC_EEDGE (-57) // Edge+start exceeds dimension bound #define NC_ESTRIDE (-58) // Illegal stride #define NC_EBADNAME (-59) // Attribute or variable name contains illegal characters // N.B. following must match value in ncx.h #define NC_ERANGE (-60) // Math result not representable #define NC_ENOMEM (-61) // Memory allocation (malloc) failure #define NC_EVARSIZE (-62) // One or more variable sizes violate format constraints #define NC_EDIMSIZE (-63) // Invalid dimension size #define NC_ETRUNC (-64) // File likely truncated or possibly corrupted #define NC_EAXISTYPE (-65) // Unknown axis type ~~~~ # DAP Error Codes {#dap-error-codes} If the DAP client is enabled, then the following additional error codes may occur. ~~~~ #define NC_EDAP (-66) // Generic DAP error #define NC_ECURL (-67) // Generic libcurl error #define NC_EIO (-68) // Generic IO error #define NC_ENODATA (-69) // Attempt to access variable with no data #define NC_EDAPSVC (-70) // DAP Server side error #define NC_EDAS (-71) // Malformed or inaccessible DAS #define NC_EDDS (-72) // Malformed or inaccessible DDS #define NC_EDATADDS (-73) // Malformed or inaccessible DATADDS #define NC_EDAPURL (-74) // Malformed DAP URL #define NC_EDAPCONSTRAINT (-75) // Malformed DAP Constraint #define NC_ETRANSLATION (-76) // Untranslatable construct #define NC_EACCESS (-77) // Access Failure #define NC_EAUTH (-78) // Authorization Failure ~~~~ # Misc. additional errors ~~~~ #define NC_ENOTFOUND (-90) // No such file #define NC_ECANTREMOVE (-91) // Cannot remove file #define NC_EINTERNAL (-92) // NetCDF Library Internal Error #define NC_EPNETCDF (-93) // Error at PnetCDF layer ~~~~ # NetCDF-4 Error Codes {#nc4-error-codes} NetCDF-4 uses all error codes from NetCDF-3 (see section [NetCDF-3 Error Codes](#NetCDF_002d3-Error-Codes)). The following additional error codes were added for new errors unique to netCDF-4. ~~~~ #define NC_EHDFERR (-101) // Error at HDF5 layer. #define NC_ECANTREAD (-102) // Cannot read. #define NC_ECANTWRITE (-103) // Cannot write. #define NC_ECANTCREATE (-104) // Cannot create. #define NC_EFILEMETA (-105) // Problem with file metadata. #define NC_EDIMMETA (-106) // Problem with dimension metadata. #define NC_EATTMETA (-107) // Problem with attribute metadata. #define NC_EVARMETA (-108) // Problem with variable metadata. #define NC_ENOCOMPOUND (-109) // Not a compound type. #define NC_EATTEXISTS (-110) // Attribute already exists. #define NC_ENOTNC4 (-111) // Attempting netcdf-4 operation on netcdf-3 file. #define NC_ESTRICTNC3 (-112) // Attempting netcdf-4 operation on strict nc3 netcdf-4 file. #define NC_ENOTNC3 (-113) // Attempting netcdf-3 operation on netcdf-4 file. #define NC_ENOPAR (-114) // Parallel operation on file opened for non-parallel access. #define NC_EPARINIT (-115) // Error initializing for parallel access. #define NC_EBADGRPID (-116) // Bad group ID. #define NC_EBADTYPID (-117) // Bad type ID. #define NC_ETYPDEFINED (-118) // Type has already been defined and may not be edited. #define NC_EBADFIELD (-119) // Bad field ID. #define NC_EBADCLASS (-120) // Bad class. #define NC_EMAPTYPE (-121) // Mapped access for atomic types only. #define NC_ELATEFILL (-122) // Attempt to define fill value when data already exists. #define NC_ELATEDEF (-123) // Attempt to define var properties, like deflate, after enddef. #define NC_EDIMSCALE (-124) // Problem with HDF5 dimscales. #define NC_ENOGRP (-125) // No group found. #define NC_ESTORAGE (-126) // Cannot specify both contiguous and chunking. #define NC_EBADCHUNK (-127) // Bad chunksize. #define NC_ENOTBUILT (-128) // Attempt to use feature that was not turned on when netCDF was built. #define NC_EDISKLESS (-129) // Error in using diskless access. #define NC_ECANTEXTEND (-130) // Attempt to extend dataset during ind. I/O operation. #define NC_EMPI (-131) // MPI operation failed. #define NC_EFILTER (-132) // Filter operation failed. #define NC_ERCFILE (-133) // RC file failure #define NC_ENULLPAD (-134) // Header Bytes not Null-Byte padded #define NC_EINMEMORY (-135) // In-memory file error ~~~~ # PnetCDF Error Codes {#pnetcdf-error-codes} ~~~~ #define NC_ESMALL (-201) // size of MPI_Offset too small for format #define NC_ENOTINDEP (-202) // Operation not allowed in collective data mode #define NC_EINDEP (-203) // Operation not allowed in independent data mode #define NC_EFILE (-204) // Unknown error in file operation #define NC_EREAD (-205) // Unknown error in reading file #define NC_EWRITE (-206) // Unknown error in writing to file #define NC_EOFILE (-207) // file open/creation failed #define NC_EMULTITYPES (-208) // Multiple etypes used in MPI datatype #define NC_EIOMISMATCH (-209) // Input/Output data amount mismatch #define NC_ENEGATIVECNT (-210) // Negative count is specified #define NC_EUNSPTETYPE (-211) // Unsupported etype in memory MPI datatype #define NC_EINVAL_REQUEST (-212) // invalid nonblocking request ID #define NC_EAINT_TOO_SMALL (-213) // MPI_Aint not large enough to hold requested value #define NC_ENOTSUPPORT (-214) // feature is not yet supported #define NC_ENULLBUF (-215) // trying to attach a NULL buffer #define NC_EPREVATTACHBUF (-216) // previous attached buffer is found #define NC_ENULLABUF (-217) // no attached buffer is found #define NC_EPENDINGBPUT (-218) // pending bput is found, cannot detach buffer #define NC_EINSUFFBUF (-219) // attached buffer is too small #define NC_ENOENT (-220) // File does not exist #define NC_EINTOVERFLOW (-221) // Overflow when type cast to 4-byte integer #define NC_ENOTENABLED (-222) // feature is not enabled #define NC_EBAD_FILE (-223) // Invalid file name (e.g., path name too long) #define NC_ENO_SPACE (-224) // Not enough space #define NC_EQUOTA (-225) // Quota exceeded #define NC_ENULLSTART (-226) // argument start is a NULL pointer #define NC_ENULLCOUNT (-227) // argument count is a NULL pointer #define NC_EINVAL_CMODE (-228) // Invalid file create mode #define NC_ETYPESIZE (-229) // MPI derived data type size error (bigger than the variable size) #define NC_ETYPE_MISMATCH (-230) // element type of the MPI derived data type mismatches the variable type #define NC_ETYPESIZE_MISMATCH (-231) // file type size mismatches buffer type size #define NC_ESTRICTCDF2 (-232) // Attempting CDF-5 operation on CDF-2 file #define NC_ENOTRECVAR (-233) // Attempting operation only for record variables #define NC_ENOTFILL (-234) // Attempting to fill a variable when its fill mode is off #define NC_EINVAL_OMODE (-235) // Invalid file open mode #define NC_EPENDING (-236) // Pending nonblocking request is found at file close #define NC_EMAX_REQ (-237) // Size of I/O request exceeds INT_MAX #define NC_EBADLOG (-238) // Unrecognized log file format #define NC_EFLUSHED (-239) // Nonblocking request has already been flushed to the PFS. It is too late to cancel #define NC_EMULTIDEFINE (-250) // NC definitions inconsistent among processes #define NC_EMULTIDEFINE_OMODE (-251) // inconsistent file open modes among processes #define NC_EMULTIDEFINE_DIM_NUM (-252) // inconsistent number of dimensions #define NC_EMULTIDEFINE_DIM_SIZE (-253) // inconsistent size of dimension #define NC_EMULTIDEFINE_DIM_NAME (-254) // inconsistent dimension names #define NC_EMULTIDEFINE_VAR_NUM (-255) // inconsistent number of variables #define NC_EMULTIDEFINE_VAR_NAME (-256) // inconsistent variable name #define NC_EMULTIDEFINE_VAR_NDIMS (-257) // inconsistent variable number of dimensions #define NC_EMULTIDEFINE_VAR_DIMIDS (-258) // inconsistent variable dimension IDs #define NC_EMULTIDEFINE_VAR_TYPE (-259) // inconsistent variable data type #define NC_EMULTIDEFINE_VAR_LEN (-260) // inconsistent variable size #define NC_EMULTIDEFINE_NUMRECS (-261) // inconsistent number of records #define NC_EMULTIDEFINE_VAR_BEGIN (-262) // inconsistent variable file begin offset (internal use) #define NC_EMULTIDEFINE_ATTR_NUM (-263) // inconsistent number of attributes #define NC_EMULTIDEFINE_ATTR_SIZE (-264) // inconsistent memory space used by attribute (internal use) #define NC_EMULTIDEFINE_ATTR_NAME (-265) // inconsistent attribute name #define NC_EMULTIDEFINE_ATTR_TYPE (-266) // inconsistent attribute type #define NC_EMULTIDEFINE_ATTR_LEN (-267) // inconsistent attribute length #define NC_EMULTIDEFINE_ATTR_VAL (-268) // inconsistent attribute value #define NC_EMULTIDEFINE_FNC_ARGS (-269) // inconsistent function arguments used in collective API #define NC_EMULTIDEFINE_FILL_MODE (-270) // inconsistent dataset fill mode #define NC_EMULTIDEFINE_VAR_FILL_MODE (-271) // inconsistent variable fill mode #define NC_EMULTIDEFINE_VAR_FILL_VALUE (-272) // inconsistent variable fill value #define NC_EMULTIDEFINE_CMODE (-273) // inconsistent file create modes among processes ~~~~