#!/bin/sh

if test "x$SETX" != x ; then set -x ; fi
set -e

quiet=0
leakcheck=0
timing=0

# Figure our dst server; if none, then just stop
TESTSERVER=`${execdir}/findtestserver dap2 dts`
if test "x$TESTSERVER" = "x" ; then
echo "***WARNING: Cannot locate test server for dts"
exit 0
fi

PARAMS="[log]"
#PARAMS="${PARAMS}[show=fetch]"

#OCLOGFILE=/dev/null
OCLOGFILE="" ; export OCLOGFILE

# Capture arguments
srcdir="$1"
builddir="$2"
#ignored mode="$3"
if test "x$4" = "x" ; then cache=1 ; else cache=0; fi
longtests="$5"

if test "x$timing" = "x1" ; then leakcheck=0; fi

# get the list of test files
# Currently C2 fails because server is not responding
#WHICHTESTS="S1 C1 C2 CB"
WHICHTESTS="S1 C1 CB"

if test -n "$longtests"; then
WHICHTESTS="${WHICHTESTS} L1 LC1 LC2"
fi

#locate the testdata and expected directory
if test "$cache" = 0 ; then
# No cache means no cache, including prefetch
CACHE="[noprefetch]"
expected3="${srcdir}/nocacheremote3"
expected4="${srcdir}/nocacheremote4"
else
CACHE="[cache][prefetch]"
expected3="${srcdir}/expectremote3"
expected4="${srcdir}/expectremote4"
fi

PARAMS="${PARAMS}${CACHE}"

##################################################
# Remote test info
##################################################

# For special testing
REMOTEURLX="$TESTSERVER"
REMOTETESTSX="test.03"

REMOTEURLXC="$TESTSERVER"
REMOTETESTSXC="test.03;1;s0,s1"

# These shorter tests are always run
REMOTEURLS1="$TESTSERVER"
REMOTETESTSS1="\
test.01 test.02 test.04 test.05 test.07a test.07 \
test.21 \
test.50 test.53 test.55 test.56 test.57 \
test.66 test.67 test.68 test.69"

# Server is failing on some tests ; investigate why
S1FAIL="test.06a test.22 test.23 test.31"
# This fails because of the duplicate name problem and the way thredds dap handles grids"
S2FAIL="test.06"

# These longer tests are optional
REMOTEURLL1="$REMOTEURLS1"
REMOTETESTSL1="\
test.03 \
b31 b31a D1 Drifters EOSDB \
ingrid nestedDAS NestedSeq NestedSeq2 OverideExample \
SimpleDrdsExample test.an1 \
test.dfp1 test.gr1 \
test.gr2 test.gr3 test.gr4 test.gr5 \
test.sds1 test.sds2 test.sds3 \
test.sds4 test.sds5 \
test.vs1 test.vs2 test.vs3 test.vs4 test.vs5 \
whoi"

# Anything larger than about 100k will not be in the distribution
TOOBIGL1="parserBug0001 test.satimage Sat_Images test.32"

# Following contain %XX escapes which I cannot handle yet
ESCAPEDFAIL="test.dfr1 test.dfr2 test.dfr3 test.GridFile test.PointFile test.SwathFile test.sds6 test.sds7"

# Following tests are to check constraint handling
REMOTEURLC1="$TESTSERVER"
REMOTETESTSC1="\
test.01;1;f64 \
test.02;1;b[1:2:10] \
test.03;1;i32[0:1][1:2][0:2] \
test.04;1;types.i32 \
test.05;1;types.floats.f32 \
test.07;1;person.age \
test.07;3;person \
test.07;4;types.f32"

# See S2FAIL above
SR1FAIL="test.06;1;ThreeD"

# Following tests are to check selection handling
REMOTEURLC2="http://oceanwatch.pfeg.noaa.gov/opendap/GLOBEC"
REMOTETESTSC2="\
GLOBEC_cetaceans;1;number&number>6 \
GLOBEC_cetaceans;2;lat,lon&lat>42.0&lat<=42.5\
"

# C3 is too slow for testing. It has nested sequences.
#We need to think about better optimizations
REMOTEURLC3="http://dapper.pmel.noaa.gov/dapper/argo"
REMOTETESTSC3="\
argo_all.cdp;1;&location.LATITUDE<1&location.LATITUDE>-1\
"

# Constrained long tests
REMOTEURLLC1="$TESTSERVER"
REMOTETESTSLC1="\
test.03;2;s1"

REMOTEURLLC2="http://ferret.pmel.noaa.gov/geoide/dodsC/PSDgriddedData/ncep.reanalysis.dailyavgs/surface"
REMOTETESTSLC2="slp_aggregated;1;slp.slp[23255:23316][29:29][88:88]"

# Unknown problem: test.07;2;&age>2
IGNORE="test.07.2" 

# Columbia hack test
REMOTEURLCB="http://iridl.ldeo.columbia.edu/SOURCES/.Models/.NMME/.NASA-GMAO/.MONTHLY/.sst"
REMOTETESTSCB="dods"

# Known to fail

XFAILTESTS3=""
# For now, remove some tests from mingw platform.
if test "x$FP_ISMINGW" = xyes ; then
    XFAILTESTS3="$XFAILTESTS3 test.67"
fi

XFAILTESTS4="$XFAILTESTS3"

# Server is down at the moment
SVCFAILTESTS3="GLOBEC_cetaceans.1 GLOBEC_cetaceans.2"
SVCFAILTESTS4="$SVCFAILTESTS3"

# Misc tests not currently used
REMOTEURL0="http://test.opendap.org/opendap/netcdf/examples"
REMOTETESTS0="\
cami_0000-09-01_64x128_L26_c030918.nc \
ECMWF_ERA-40_subset.nc \
sresa1b_ncar_ccsm3_0_run1_200001.nc \
tos_O1_2001-2002.nc
123bears.nc \
ber-2002-10-01.nc \
ceopL2AIRS2-2.nc \
ceopL2AIRS2.nc \
data.nc \
fnoc1.nc \
in1.nc \
in_2.nc \
in.nc \
in_no_three_double_dmn.nc \
in_v.nc \
saco1.nc \
testfile.nc \
text.nc \
"

TITLE="DAP to netCDF-3 translation"
EXPECTED="$expected3"
PARAMS="${PARAMS}[netcdf3]"
XFAILTESTS="$XFAILTESTS3"
SVCFAILTESTS="$SVCFAILTESTS3"

RESULTSDIR="./results_tst_remote"
# Locate some tools
if test "x$leakcheck" = x1 ; then
VALGRIND="valgrind -q --error-exitcode=2 --leak-check=full"
fi
if test "x$timing" = "x1" ; then TIMECMD="time"; else TIMECMD=""; fi

rm -fr ${RESULTSDIR}
mkdir -p "${RESULTSDIR}"

passcount=0
xfailcount=0
svcfailcount=0
failcount=0

echo "*** Testing $TITLE "
echo "        Client Parameters: ${PARAMS}"
if test "$cache" = 0; then
echo "        Caching: off"
else
echo "        Caching: on"
fi
echo "    Note: The remote tests may be slow or even fail if the server is overloaded"

status=0

for i in $WHICHTESTS ; do
  constrained=0
  case "$i" in
  S1) TESTURL="$REMOTEURLS1" ; TESTSET="$REMOTETESTSS1" ;;
  S2) TESTURL="$REMOTEURLS2" ; TESTSET="$REMOTETESTSS2" ;;
  L1) TESTURL="$REMOTEURLL1" ; TESTSET="$REMOTETESTSL1" ;;
  L2) TESTURL="$REMOTEURLL2" ; TESTSET="$REMOTETESTSL2" ;;
  C1) TESTURL="$REMOTEURLC1" ; TESTSET="$REMOTETESTSC1" ; constrained=1 ;;
  C2) TESTURL="$REMOTEURLC2" ; TESTSET="$REMOTETESTSC2" ; constrained=1 ;ncconstrained=0 ;;
  C3) TESTURL="$REMOTEURLC3" ; TESTSET="$REMOTETESTSC3" ; constrained=1 ;ncconstrained=0 ;;
  LC1) TESTURL="$REMOTEURLLC1" ; TESTSET="$REMOTETESTSLC1" ; constrained=1 ;;
  LC2) TESTURL="$REMOTEURLLC2" ; TESTSET="$REMOTETESTSLC2" ; constrained=1 ;;
  X) TESTURL="$REMOTEURLX" ; TESTSET="$REMOTETESTSX" ; constrained=0 ;;
  XC) TESTURL="$REMOTEURLXC" ; TESTSET="$REMOTETESTSXC" ; constrained=1 ;;
  *) echo "Unknown which test: $i" ;;
  esac

rm -f ./.dodsrc ./.ocrc ./.daprc
cd ${RESULTSDIR}

for t in ${TESTSET} ; do

  # see if we are using constraints
  #index=`expr index "${t}" ";"`
  
  #echo index: $index
  if test "x$FP_ISOSX" = xyes ; then
      index=`echo "${t}" | sed -n "s/;.*//p" | wc -c` 
      if (( $index == 0 )) ; then
	  constrained=0
      else
	  constrained=1
      fi
  else
      if index=`expr index "${t}" ";"` ; then ignore=1; fi # avoid set -e
      if test "x$index" = "x0" ; then
	  constrained=0
      else
	  constrained=1
      fi
  fi

  if test "x$constrained" = "x0" ; then # No constraint
    testname=$t
    ce=
  else # Constrained
      
    testname=`echo $t | cut -d ';' -f1`
    testno=`echo $t | cut -d ';' -f2`
    ce=`echo $t | cut -d ';' -f3-`
  fi
  if test "x$constrained" = "x0" ; then
    name="${testname}"
    url="${PARAMS}${TESTURL}/$testname"
  else
    name="${testname}.${testno}"
    url="${PARAMS}${TESTURL}/$testname?${ce}"
  fi
  if test "x$quiet" = "x0" ; then echo "*** Testing: ${name}"; fi
  if test "x$quiet" = "x0" ; then echo "*** URL: ${url}"; fi

  # determine if this is an xfailtest
  isxfail=0
  for x in ${XFAILTESTS} ; do
    if test "x${name}" = "x${x}" ; then isxfail=1; fi
  done

  # determine if this is a down server test
  issvcfail=0
  for x in ${SVCFAILTESTS} ; do
    if test "x${name}" = "x${x}" ; then issvcfail=1; fi
  done

  status=0

  echo "command = ${TIMECMD} ${VALGRIND} ${NCDUMP} ${url} \> ${name}.dmp"
  if ${TIMECMD} ${VALGRIND} ${NCDUMP} "${url}" > ${name}.dmp ; then status=$status; else status=1; fi
  # compare with expected
  if diff -w ${EXPECTED}/${name}.dmp ${name}.dmp
    then status=$status; else status=1; fi
  if test "x$status" = "x1" ; then
    if test "x$isxfail" = "x1" ; then status=2; fi  # xfail
    if test "x$issvcfail" = "x1" ; then status=3; fi  # svcfail
  fi

  case "$status" in
  0)
    passcount=`expr $passcount + 1`
    if test "x$quiet" = "x" ; then echo "*** SUCCEED: ${name}"; fi
    ;;
  1)
    failcount=`expr $failcount + 1`
    echo "*** FAIL:  ${name}"
    ;;
  2)
    xfailcount=`expr $xfailcount + 1`
    echo "*** XFAIL : ${name}"
    ;;
  3)
    svcfailcount=`expr $svcfailcount + 1`
    echo "*** SVCFAIL : ${name}"
    ;;
  esac

done

rm -f ./.dodsrc

cd ..

done

rm -fr ${RESULTSDIR}
totalcount=`expr $passcount + $failcount + $xfailcount + $svcfailcount`
okcount=`expr $passcount + $xfailcount + $svcfailcount`

echo "*** PASSED: ${okcount}/${totalcount} ; ${xfailcount} expected failures ; ${failcount} unexpected failures"
if test "$svcfailcount" -gt 0 ; then
echo "            ${svcfailcount} failures from unavailable server"
fi

# Ignore failures for now
#failcount=0
if test "$failcount" -gt 0 ; then
  exit 1
else
  exit 0
fi