# -*- Autoconf -*- ## Process this file with autoconf to produce a configure script. # This is part of Unidata's netCDF package. Copyright 2005-2018, see # the COPYRIGHT file for more information. # Ed Hartnett, Ward Fisher, Dennis Heimbigner # Running autoconf on this file will trigger a warning if # autoconf is not at least the specified version. AC_PREREQ([2.59]) # Initialize with name, version, and support email address. AC_INIT([netCDF],[4.9.3-development],[support-netcdf@unidata.ucar.edu],[netcdf-c]) ## # Prefer an empty CFLAGS variable instead of the default -g -O2. # See: # * http://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.69/html_node/C-Compiler.html#C-Compiler ## : ${CFLAGS=""} AC_SUBST([netCDF_VERSION_MAJOR]) netCDF_VERSION_MAJOR=4 AC_SUBST([netCDF_VERSION_MINOR]) netCDF_VERSION_MINOR=9 AC_SUBST([netCDF_VERSION_PATCH]) netCDF_VERSION_PATCH=3 AC_SUBST([NC_VERSION_NOTE]) NC_VERSION_NOTE="-development" ## # These linker flags specify libtool version info. # See http://www.gnu.org/software/libtool/manual/libtool.html#Libtool-versioning # for information regarding incrementing `-version-info`. # These values should match those in CMakeLists.txt AC_SUBST([netCDF_SO_VERSION]) netCDF_SO_VERSION=21:2:2 ##### # Set some variables used to generate a libnetcdf.settings file, # pattered after the files generated by libhdf4, libhdf5. ##### # Create the VERSION file, which contains the package version from AC_INIT. # This file is apparently unused. But see the bottom of Makefile.am # echo AC_PACKAGE_VERSION>VERSION AC_SUBST(PACKAGE_VERSION) AC_MSG_NOTICE([netCDF AC_PACKAGE_VERSION]) # Keep libtool macros in an m4 directory. AC_CONFIG_MACRO_DIR([m4]) # Configuration Date if test "x$SOURCE_DATE_EPOCH" != "x" ; then AC_SUBST([CONFIG_DATE]) CONFIG_DATE="`date -u -d "${SOURCE_DATE_EPOCH}"`" else AC_SUBST([CONFIG_DATE]) CONFIG_DATE="`date`" fi # Find out about the host we're building on. AC_CANONICAL_HOST # Find out about the target we're building for. AC_CANONICAL_TARGET AC_CONFIG_HEADERS([config.h]) ## # Check to see if the compiler supports -fno-strict-aliasing and, if so, # add that to the C compiler flags. This is in support of https://github.com/Unidata/netcdf-c/issues/1983. ## SAVE_CFLAGS="${CFLAGS}" AC_LANG_PUSH([C]) AC_LANG_COMPILER_REQUIRE CFLAGS="${CFLAGS} -fno-strict-aliasing" AC_COMPILE_IFELSE([AC_LANG_PROGRAM([ [int i = 0;]])], [have_no_strict_aliasing=yes], [have_no_strict_aliasing=no]) AC_MSG_CHECKING([whether compiler supports -fno-strict-aliasing]) AC_MSG_RESULT([$have_no_strict_aliasing]) AC_LANG_POP([C]) if test $have_no_strict_aliasing = no; then CFLAGS=$SAVE_CFLAGS fi ## # Some files need to exist in build directories # that do not correspond to their source directory, or # the test program makes an assumption about where files # live. AC_CONFIG_LINKS provides a mechanism to link/copy files # if an out-of-source build is happening. ## AC_CONFIG_LINKS([nc_test4/ref_hdf5_compat1.nc:nc_test4/ref_hdf5_compat1.nc]) AC_CONFIG_LINKS([nc_test4/ref_hdf5_compat2.nc:nc_test4/ref_hdf5_compat2.nc]) AC_CONFIG_LINKS([nc_test4/ref_hdf5_compat3.nc:nc_test4/ref_hdf5_compat3.nc]) AC_CONFIG_LINKS([hdf4_test/ref_chunked.hdf4:hdf4_test/ref_chunked.hdf4]) AC_CONFIG_LINKS([hdf4_test/ref_contiguous.hdf4:hdf4_test/ref_contiguous.hdf4]) AM_INIT_AUTOMAKE([foreign dist-zip subdir-objects]) #AM_MAINTAINER_MODE() # Check for the existence of this file before proceeding. AC_CONFIG_SRCDIR([include/netcdf.h]) # Figure out platforms of special interest AC_CANONICAL_HOST AS_CASE([$host], [*-*-cygwin], [ISCYGWIN=yes], [*-*-darwin*], [ISOSX=yes], [*-*-mingw*], [ISMINGW=yes], [*-*-msys], [ISMINGW=yes], [*-*-win*], [ISMSVC=yes], [] ) if test "x$MSYSTEM" != x ; then ISMINGW=yes ISMSYS=yes fi # Get windows version info if test "x$ISMSVC" = xyes ; then WINVER=`systeminfo | sed -e '/^OS Version:/p' -ed | sed -e 's|[^0-9]*\([0-9.]*\).*|\1|'` else WINVER="0.0.0" fi WINVERMAJOR=`echo $WVER | sed -e 's|\([^.]*\)[.]\([^.]*\)[.]\(.*\)|\1|'` WINVERBUILD=`echo $WVER | sed -e 's|\([^.]*\)[.]\([^.]*\)[.]\(.*\)|\3|'` if test "x$WINVERMAJOR" = x ; then WINVERMAJOR=0; fi if test "x$WINVERBUILD" = x ; then WINVERBUILD=0; fi AC_DEFINE_UNQUOTED([WINVERMAJOR], [$WINVERMAJOR], [windows version major]) AC_DEFINE_UNQUOTED([WINVERBUILD], [$WINVERBUILD], [windows version build]) AC_MSG_NOTICE([checking supported formats]) # An explicit disable of netcdf-4 | netcdf4 is treated as if it was disable-hdf5 AC_MSG_CHECKING([whether we should build with netcdf4 (alias for HDF5)]) AC_ARG_ENABLE([netcdf4], [AS_HELP_STRING([--disable-netcdf4], [(Deprecated) Synonym for --enable-hdf5)])]) test "x$enable_netcdf4" = xno || enable_netcdf4=yes AC_MSG_RESULT([$enable_netcdf4 (Deprecated) Please use --disable-hdf5)]) AC_MSG_CHECKING([whether we should build with netcdf-4 (alias for HDF5)]) AC_ARG_ENABLE([netcdf-4], [AS_HELP_STRING([--disable-netcdf-4], [(synonym for --disable-netcdf4)])]) test "x$enable_netcdf_4" = xno || enable_netcdf_4=yes AC_MSG_RESULT([$enable_netcdf_4]) # Propagate the alias if test "x$enable_netcdf_4" = xno ; then enable_netcdf4=no; fi if test "x$enable_netcdf4" = xno ; then enable_netcdf_4=no; fi # Does the user want to use HDF5? AC_MSG_CHECKING([whether we should build with HDF5]) AC_ARG_ENABLE([hdf5], [AS_HELP_STRING([--disable-hdf5], [do not build with HDF5])]) test "x$enable_hdf5" = xno || enable_hdf5=yes if test "x$enable_netcdf4" = xno ; then enable_hdf5=no ; fi # disable-netcdf4 is synonym for disable-hdf5 AC_MSG_RESULT([$enable_hdf5]) # Check whether we want to enable CDF5 support. AC_MSG_CHECKING([whether CDF5 support should be disabled]) AC_ARG_ENABLE([cdf5], [AS_HELP_STRING([--disable-cdf5], [build without CDF5 support. @<:@default: auto@:>@])], [enable_cdf5=${enableval}], [enable_cdf5=auto] ) AC_MSG_RESULT($enable_cdf5) # Does the user want to turn on HDF4 read ability? AC_MSG_CHECKING([whether reading of HDF4 SD files is to be enabled]) AC_ARG_ENABLE([hdf4], [AS_HELP_STRING([--enable-hdf4], [build netcdf with HDF4 read capability (HDF4, HDF5 and zlib required)])]) test "x$enable_hdf4" = xyes || enable_hdf4=no AC_MSG_RESULT($enable_hdf4) AC_MSG_CHECKING([whether parallel I/O for classic files is to be enabled]) AC_ARG_ENABLE([pnetcdf], [AS_HELP_STRING([--enable-pnetcdf], [build with parallel I/O for classic files. @<:@default: disabled@:>@])]) test "x$enable_pnetcdf" = xyes || enable_pnetcdf=no AC_MSG_RESULT($enable_pnetcdf) AC_MSG_CHECKING([whether any network access should be allowed]) AC_ARG_ENABLE([remote-functionality], [AS_HELP_STRING([--enable-remote-functionality], [enable|disable all forms of network access (default enabled)])]) test "x$enable_remote_functionality" = xno || enable_remote_functionality=yes AC_MSG_RESULT($enable_remote_functionality) # We need curl for remote operations AC_CHECK_LIB([curl],[curl_easy_setopt],[found_curl=yes],[found_curl=no]) if test "x$found_curl" = "xyes" ; then AC_SEARCH_LIBS([curl_easy_setopt],[curl curl.dll cygcurl.dll], [],[]) fi ## Capture the state of the --enable-dap flag => enable dap2+dap4 AC_MSG_CHECKING([whether DAP client(s) are to be built]) AC_ARG_ENABLE([dap], [AS_HELP_STRING([--disable-dap], [build without DAP client support.])]) test "x$enable_dap" = xno || enable_dap=yes AC_MSG_RESULT($enable_dap) if test "x$enable_remote_functionality" = xno ; then AC_MSG_WARN([All network access is disabled => DAP support disabled.]) enable_dap=no fi if test "x$enable_dap" = xyes & test "x$found_curl" = xno ; then AC_MSG_WARN([curl required for dap access. DAP support disabled.]) enable_dap=no fi AC_MSG_CHECKING([whether netcdf zarr storage format should be disabled]) AC_ARG_ENABLE([nczarr], [AS_HELP_STRING([--disable-nczarr], [disable netcdf zarr storage support])]) test "x$enable_nczarr" = xno || enable_nczarr=yes AC_MSG_RESULT($enable_nczarr) # HDF5 | HDF4 | NCZarr => netcdf-4 if test "x$enable_hdf5" = xyes || test "x$enable_hdf4" = xyes || test "x$enable_nczarr" = xyes ; then enable_netcdf_4=yes fi AC_MSG_CHECKING([whether netcdf-4 should be forcibly enabled]) AC_MSG_RESULT([$enable_netcdf_4]) # Synonym enable_netcdf4=${enable_netcdf_4} AC_MSG_NOTICE([checking user options]) # Did the user specify a default minimum blocksize (NCIO_MINBLOCKSIZE) for posixio? AC_MSG_CHECKING([whether a NCIO_MINBLOCKSIZE was specified]) AC_ARG_WITH([minblocksize], [AS_HELP_STRING([--with-minblocksize=], [Specify minimum I/O blocksize for netCDF classic and 64-bit offset format files.])], [NCIO_MINBLOCKSIZE=$with_minblocksize], [NCIO_MINBLOCKSIZE=256]) AC_MSG_RESULT([$NCIO_MINBLOCKSIZE]) AC_DEFINE_UNQUOTED([NCIO_MINBLOCKSIZE], [$NCIO_MINBLOCKSIZE], [min blocksize for posixio.]) # Find valgrind, if available, and add targets for it. AX_VALGRIND_DFLT([sgcheck], [off]) AX_VALGRIND_CHECK AM_CONDITIONAL(ENABLE_VALGRIND, [test "x$VALGRIND_ENABLED" = xyes]) ### # Doxygen and doxygen-related options. ### AC_ARG_ENABLE([doxygen], [AS_HELP_STRING([--enable-doxygen], [Enable generation of documentation.])]) test "x$enable_doxygen" = xyes || enable_doxygen=no AM_CONDITIONAL([BUILD_DOCS], [test "x$enable_doxygen" = xyes]) AC_ARG_ENABLE([doxygen-tasks], [AS_HELP_STRING([--enable-doxygen-tasks], [Enable Doxygen-generated test, todo and bug list documentation. Developers only.])]) test "x$enable_doxygen_tasks" = xyes || enable_doxygen_tasks=no AM_CONDITIONAL([SHOW_DOXYGEN_TAG_LIST], [test "x$enable_doxygen_tasks" = xyes]) AC_SUBST([SHOW_DOXYGEN_TAG_LIST], [$enable_doxygen_tasks]) ### # Determine if we should build documentation # configured for releases on the Unidata web server. ### AC_ARG_ENABLE([doxygen-build-release-docs], [AS_HELP_STRING([--enable-doxygen-build-release-docs], [Build release documentation. This is of interest only to developers.])]) test "x$enable_doxygen_build_release_docs" = xyes || enable_doxygen_build_release_docs=no AM_CONDITIONAL([DOXYGEN_BUILD_RELEASE_DOCS], [test "x$enable_doxygen_build_release_docs" = xyes]) if test $enable_doxygen_build_release_docs = yes; then AC_SUBST([DOXYGEN_CSS_FILE], ["release.css"]) AC_SUBST([DOXYGEN_HEADER_FILE], ["release_header.html"]) AC_SUBST([DOXYGEN_SEARCHENGINE], ["NO"]) else AC_SUBST([DOXYGEN_CSS_FILE], []) AC_SUBST([DOXYGEN_HEADER_FILE], []) AC_SUBST([DOXYGEN_SEARCHENGINE], ["YES"]) fi AC_SUBST([DOXYGEN_SERVER_BASED_SEARCH], ["NO"]) AC_ARG_ENABLE([doxygen-pdf-output], [AS_HELP_STRING([--enable-doxygen-pdf-output], [Build netCDF library documentation in PDF format. Experimental.])]) AM_CONDITIONAL([NC_ENABLE_DOXYGEN_PDF_OUTPUT], [test "x$enable_doxygen_pdf_output" = xyes]) AC_SUBST([NC_ENABLE_DOXYGEN_PDF_OUTPUT], [$enable_doxygen_pdf_output]) AC_ARG_ENABLE([dot], [AS_HELP_STRING([--enable-dot], [Use dot (provided by graphviz) to generate charts and graphs in the doxygen-based documentation.])]) test "x$enable_dot" = xyes || enable_dot=no AC_ARG_ENABLE([internal-docs], [AS_HELP_STRING([--enable-internal-docs], [Include documentation of library internals. This is of interest only to those developing the netCDF library.])]) test "x$enable_internal_docs" = xyes || enable_internal_docs=no AC_SUBST([BUILD_INTERNAL_DOCS], [$enable_internal_docs]) # Doxygen is apparently buggy when trying to combine a markdown # file with @internal. The equivalent can be faked using # the Doxygen ENABLED_SECTIONS mechanism. See docs/testserver.dox # to see how this is done. sections= if test "x$enable_internal_docs" = xyes ; then sections="$sections INTERNAL" fi AC_SUBST([ENABLED_DOC_SECTIONS], [$sections]) AC_MSG_CHECKING([if fsync support is enabled]) AC_ARG_ENABLE([fsync], [AS_HELP_STRING([--enable-fsync], [enable fsync support])], [], [enable_fsync=no]) test "x$enable_fsync" = xno || enable_fsync=yes AC_MSG_RESULT($enable_fsync) if test "x$enable_fsync" = xyes ; then AC_DEFINE([USE_FSYNC], [1], [if true, include experimental fsync code]) fi # Temporary until JNA bug is fixed (which is probably never). # The problem being solved is this: # > On Windows using the microsoft runtime, it is an error # > for one library to free memory allocated by a different library. # This is probably only an issue when using the netcdf-c library # via JNA under Java. AC_MSG_CHECKING([if jna bug workaround is enabled]) AC_ARG_ENABLE([jna], [AS_HELP_STRING([--enable-jna], [enable jna bug workaround])], [], [enable_jna=no]) test "x$enable_jna" = xno || enable_jna=yes AC_MSG_RESULT($enable_jna) if test "x$enable_jna" = xyes ; then AC_DEFINE([JNA], [1], [if true, include jna bug workaround code]) fi # Does the user want to turn off unit tests (useful for test coverage # analysis). AC_MSG_CHECKING([if unit tests should be enabled]) AC_ARG_ENABLE([unit-tests], [AS_HELP_STRING([--enable-unit-tests], [Disable tests in unit_test directory. Other tests still run.])]) test "x$enable_unit_tests" = xno || enable_unit_tests=yes AC_MSG_RESULT($enable_unit_tests) AM_CONDITIONAL(BUILD_UNIT_TESTS, [test "x$enable_unit_tests" = xyes]) # Does the user require dynamic loading? # This is only for those hdf5 installs that support it. AC_MSG_CHECKING([do we require hdf5 dynamic-loading support]) AC_ARG_ENABLE([dynamic-loading], [AS_HELP_STRING([--enable-dynamic-loading], [enable dynamic loading for use with supported hdf5 installs (libdl, HDF5 required)])]) test "x$enable_dynamic_loading" = xno || enable_dynamic_loading=yes AC_MSG_RESULT([$enable_dynamic_loading]) # Does the user want to turn on extra HDF4 file tests? AC_MSG_CHECKING([whether to fetch some sample HDF4 files from Unidata ftp site to test HDF4 reading (requires wget)]) AC_ARG_ENABLE([hdf4-file-tests], [AS_HELP_STRING([--enable-hdf4-file-tests], [get some HDF4 files from Unidata ftp site and test that they can be read])]) test "x$enable_hdf4" = xyes -a "x$enable_hdf4_file_tests" = xyes || enable_hdf4_file_tests=no if test "x$enable_hdf4_file_tests" = xyes; then AC_DEFINE([USE_HDF4_FILE_TESTS], 1, [If true, use use wget to fetch some sample HDF4 data, and then test against it.]) fi AC_MSG_RESULT($enable_hdf4_file_tests) # Does the user want to run extra parallel tests when parallel netCDF-4 is built? AC_MSG_CHECKING([whether parallel IO tests should be run]) AC_ARG_ENABLE([parallel-tests], [AS_HELP_STRING([--enable-parallel-tests], [Run extra parallel IO tests. Requires netCDF-4 with parallel I/O support.])]) test "x$enable_parallel_tests" = xyes || enable_parallel_tests=no AC_MSG_RESULT($enable_parallel_tests) # Did the user specify an MPI launcher other than mpiexec? AC_MSG_CHECKING([whether a user specified program to run mpi programs]) AC_ARG_WITH([mpiexec], [AS_HELP_STRING([--with-mpiexec=], [Specify command to launch MPI parallel tests.])], [MPIEXEC=$with_mpiexec], [MPIEXEC=mpiexec]) AC_MSG_RESULT([$MPIEXEC]) AC_SUBST([MPIEXEC], [$MPIEXEC]) # Did the user specify a default chunk size? AC_MSG_CHECKING([whether a default chunk size in bytes was specified]) AC_ARG_WITH([default-chunk-size], [AS_HELP_STRING([--with-default-chunk-size=], [Specify default size of chunks in bytes.])], [DEFAULT_CHUNK_SIZE=$with_default_chunk_size], [DEFAULT_CHUNK_SIZE=4194304]) AC_MSG_RESULT([$DEFAULT_CHUNK_SIZE]) AC_DEFINE_UNQUOTED([DEFAULT_CHUNK_SIZE], [$DEFAULT_CHUNK_SIZE], [default chunk size in bytes]) # Did the user specify a default cache size? AC_MSG_CHECKING([whether a default cache size was specified]) AC_ARG_WITH([default-chunk-cache-size], [AS_HELP_STRING([--with-default-chunk-cache-size=], [Specify default size (in bytes) for chunk cache.])], [DEFAULT_CHUNK_CACHE_SIZE=$with_default_chunk_cache_size], [DEFAULT_CHUNK_CACHE_SIZE=16777216U]) AC_MSG_RESULT([$DEFAULT_CHUNK_CACHE_SIZE]) AC_DEFINE_UNQUOTED([DEFAULT_CHUNK_CACHE_SIZE], [$DEFAULT_CHUNK_CACHE_SIZE], [default size of the chunk cache.]) # Did the user specify a max number of chunks in default per-var cache size? AC_MSG_CHECKING([whether a default number of entries for the chunk cache was specified]) AC_ARG_WITH([default-chunks-in-cache], [AS_HELP_STRING([--with-default-chunks-in-cache=], [Specify the max number of chunks to store in cache.])], [DEFAULT_CHUNKS_IN_CACHE=$with_default_chunks_in_cache], [DEFAULT_CHUNKS_IN_CACHE=1000]) AC_MSG_RESULT([$DEFAULT_CHUNKS_IN_CACHE]) AC_DEFINE_UNQUOTED([DEFAULT_CHUNKS_IN_CACHE], [$DEFAULT_CHUNKS_IN_CACHE], [default max num chunks in chunk cache.]) # Did the user specify a default cache preemption AC_MSG_CHECKING([whether a default cache preemption was specified]) AC_ARG_WITH([default-chunk-cache-preemption], [AS_HELP_STRING([--with-chunk-cache-preemption=], [Specify default file chunk cache preemption policy (a number between 0 and 1, inclusive).])], [DEFAULT_CHUNK_CACHE_PREEMPTION=$with_chunk_cache_preemption], [DEFAULT_CHUNK_CACHE_PREEMPTION=0.75]) AC_MSG_RESULT([$DEFAULT_CHUNK_CACHE_PREEMPTION]) AC_DEFINE_UNQUOTED([DEFAULT_CHUNK_CACHE_PREEMPTION], [$DEFAULT_CHUNK_CACHE_PREEMPTION], [default file chunk cache preemption policy.]) # These three options are redundant over the --with-default... options above. # Did the user specify a default cache size for HDF5? AC_MSG_CHECKING([whether a default file cache size for HDF5 was specified]) AC_ARG_WITH([chunk-cache-size], [AS_HELP_STRING([--with-chunk-cache-size=], [Specify default file cache chunk size for HDF5 files in bytes.])], [CHUNK_CACHE_SIZE=$with_chunk_cache_size], [CHUNK_CACHE_SIZE=DEFAULT_CHUNK_CACHE_SIZE]) AC_MSG_RESULT([$CHUNK_CACHE_SIZE]) AC_DEFINE_UNQUOTED([CHUNK_CACHE_SIZE], [$CHUNK_CACHE_SIZE], [default file chunk cache size in bytes.]) # Did the user specify a default max cache entries for HDF5 AC_MSG_CHECKING([whether a default file cache maximum number of elements for HDF5 was specified]) AC_ARG_WITH([chunk-cache-nelems], [AS_HELP_STRING([--with-chunk-cache-nelems=], [Specify default maximum number of elements in the file chunk cache chunk for HDF5 files (should be prime number).])], [CHUNK_CACHE_NELEMS=$with_chunk_cache_nelems], [CHUNK_CACHE_NELEMS=DEFAULT_CHUNKS_IN_CACHE]) AC_MSG_RESULT([$CHUNK_CACHE_NELEMS]) AC_DEFINE_UNQUOTED([CHUNK_CACHE_NELEMS], [$CHUNK_CACHE_NELEMS], [default file chunk cache nelems.]) # Did the user specify a default cache preemption for HDF5? AC_MSG_CHECKING([whether a default cache preemption for HDF5 was specified]) AC_ARG_WITH([chunk-cache-preemption], [AS_HELP_STRING([--with-chunk-cache-preemption=], [Specify default file chunk cache preemption policy for HDF5 files (a number between 0 and 1, inclusive).])], [CHUNK_CACHE_PREEMPTION=$with_chunk_cache_preemption], [CHUNK_CACHE_PREEMPTION=DEFAULT_CHUNK_CACHE_PREEMPTION]) AC_MSG_RESULT([$CHUNK_CACHE_PREEMPTION]) AC_DEFINE_UNQUOTED([CHUNK_CACHE_PREEMPTION], [$CHUNK_CACHE_PREEMPTION], [default file chunk cache preemption policy.]) # Does the user want to enable netcdf-4 logging? AC_MSG_CHECKING([whether netCDF-4 logging is enabled]) AC_ARG_ENABLE([logging], [AS_HELP_STRING([--enable-logging], [enable logging capability (only applies when netCDF-4 is built). \ This debugging features is only of interest to netCDF developers. \ Ignored if netCDF-4 is not enabled.])]) test "x$enable_logging" = xyes || enable_logging=no AC_MSG_RESULT([$enable_logging]) # Does the user want to turn off nc_set_log_level() function? (It will # always be defined if --enable-logging is used.) AC_MSG_CHECKING([whether nc_set_log_level() function is included (will do nothing unless enable-logging is also used)]) AC_ARG_ENABLE([set_log_level_func], [AS_HELP_STRING([--disable-set-log-level-func], [disable the nc_set_log_level function])]) test "x$enable_set_log_level_func" = xno -a "x$enable_logging" = xno || enable_set_log_level_func=yes if test "x$enable_set_log_level_func" = xyes -a "x$enable_netcdf_4" = xyes; then AC_DEFINE([ENABLE_SET_LOG_LEVEL], 1, [If true, define nc_set_log_level.]) fi AC_MSG_RESULT($enable_set_log_level_func) # CURLOPT_USERNAME is not defined until curl version 7.19.1 # CURLOPT_PASSWORD is not defined until curl version 7.19.1 # CURLOPT_KEYPASSWD is not defined until curl version 7.16.4 # CURLINFO_RESPONSE_CODE is not defined until curl version 7.10.7 # CURLOPT_CHUNK_BGN_FUNCTION is not defined until curl version 7.21.0 # CURL_MAX_READ_SIZE is not defined until 7.59 # Save/restore CFLAGS SAVECFLAGS="$CFLAGS" CFLAGS="${curl_cflags}" AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include "curl/curl.h"], [[int x = CURLOPT_USERNAME;]])], [haveusername=yes], [haveusername=no]) AC_MSG_CHECKING([whether CURLOPT_USERNAME is defined]) AC_MSG_RESULT([${haveusername}]) if test $haveusername = yes; then AC_DEFINE([HAVE_CURLOPT_USERNAME],[1],[Is CURLOPT_USERNAME defined]) fi AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include "curl/curl.h"], [[int x = CURLOPT_PASSWORD;]])], [havepassword=yes], [havepassword=no]) AC_MSG_CHECKING([whether CURLOPT_PASSWORD is defined]) AC_MSG_RESULT([${havepassword}]) if test $havepassword = yes; then AC_DEFINE([HAVE_CURLOPT_PASSWORD],[1],[Is CURLOPT_PASSWORD defined]) fi AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include "curl/curl.h"], [[int x = CURLOPT_KEYPASSWD;]])], [havekeypassword=yes], [havekeypassword=no]) AC_MSG_CHECKING([whether CURLOPT_KEYPASSWD is defined]) AC_MSG_RESULT([${havekeypassword}]) if test $havekeypassword = yes; then AC_DEFINE([HAVE_CURLOPT_KEYPASSWD],[1],[Is CURLOPT_KEYPASSWD defined]) fi AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include "curl/curl.h"], [[int x = CURLINFO_RESPONSE_CODE;]])], [haveresponsecode=yes], [haveresponsecode=no]) AC_MSG_CHECKING([whether CURLINFO_RESPONSE_CODE is defined]) AC_MSG_RESULT([${haveresponsecode}]) if test $haveresponsecode = yes; then AC_DEFINE([HAVE_CURLINFO_RESPONSE_CODE],[1],[Is CURLINFO_RESPONSE_CODE defined]) fi AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include "curl/curl.h"], [[int x = CURLOPT_BUFFERSIZE;]])], [havecurloption=yes], [havecurloption=no]) AC_MSG_CHECKING([whether CURLOPT_BUFFERSIZE is defined]) AC_MSG_RESULT([${havecurloption}]) if test $havecurloption = yes; then AC_DEFINE([HAVE_CURLOPT_BUFFERSIZE],[1],[Is CURLOPT_BUFFERSIZE defined]) fi AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include "curl/curl.h"], [[int x = CURLOPT_TCP_KEEPALIVE;]])], [havecurloption=yes], [havecurloption=no]) AC_MSG_CHECKING([whether CURLOPT_TCP_KEEPALIVE is defined]) AC_MSG_RESULT([${havecurloption}]) if test $havecurloption = yes; then AC_DEFINE([HAVE_CURLOPT_KEEPALIVE],[1],[Is CURLOPT_TCP_KEEPALIVE defined]) fi # CURLOPT_VERIFYHOST semantics differ depending on version AC_MSG_CHECKING([whether libcurl is version 7.66 or later?]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include "curl/curl.h"], [[ #if !CURL_AT_LEAST_VERSION(7,66,0) error "<7.66"; #endif ]])], [libcurl766=yes], [libcurl766=no]) AC_MSG_RESULT([$libcurl766]) if test x$libcurl766 = xyes; then AC_DEFINE([HAVE_LIBCURL_766],[1],[libcurl version is 7.66 or later]) fi CFLAGS="$SAVECFLAGS" ### # Libxml2 control block. ### AC_MSG_CHECKING([whether to search for and use external libxml2]) AC_ARG_ENABLE([libxml2], [AS_HELP_STRING([--disable-libxml2], [disable detection and use of libxml2 in favor of the bundled xml parser])]) test "x$enable_libxml2" = xno || enable_libxml2=yes AC_MSG_RESULT([$enable_libxml2]) # We can optionally use libxml2 for DAP4 and nch5comms, if enabled have_libxml2=no if test "x$enable_libxml2" = xyes; then AC_CHECK_PROGS([NC_XML2_CONFIG], [xml2-config]) if test -z "$NC_XML2_CONFIG"; then AC_MSG_ERROR([Cannot find xml2-config utility. Either install the libxml2 development package, or re-run configure with --disable-libxml2 to use the bundled xml2 parser]) fi AC_CHECK_LIB([xml2],[xmlReadMemory],[have_libxml2=yes],[have_libxml2=no]) if test "x$have_libxml2" = "xyes" ; then AC_SEARCH_LIBS([xmlReadMemory],[xml2 xml2.dll cygxml2.dll], [],[]) fi if test "x$have_libxml2" = xyes; then XML2FLAGS=`xml2-config --cflags` AC_SUBST([XML2FLAGS],${XML2FLAGS}) AC_DEFINE([HAVE_LIBXML2], [1], [if true, use libxml2]) fi fi if test "x$enable_libxml2" = xyes; then XMLPARSER="libxml2" else XMLPARSER="tinyxml2 (bundled)" fi # Need a condition and subst for this AM_CONDITIONAL(ENABLE_LIBXML2, [test "x$enable_libxml2" = xyes]) AC_SUBST([XMLPARSER],[${XMLPARSER}]) ### # End Libxml2 block ### ## # Should quantize be enabled? # On by default, but for testing purposes we may want to # disable it. ## AC_MSG_CHECKING([whether to enable quantize functionality]) AC_ARG_ENABLE([quantize], [AS_HELP_STRING([--disable-quantize], [disable quantize support. It is safe to leave this on unless you specifically need to disable it.])]) test "x$enable_quantize" = xno || enable_quantize=yes AC_MSG_RESULT($enable_quantize) if test "x${enable_quantize}" = xyes; then AC_DEFINE([ENABLE_QUANTIZE], [1], [if true, enable quantize support]) fi AM_CONDITIONAL(ENABLE_QUANTIZE, [test x$enable_quantize = xyes]) # --enable-dap => enable-dap4 enable_dap4=$enable_dap AC_MSG_CHECKING([whether dap use of remotetest server should be enabled]) AC_ARG_ENABLE([dap-remote-tests], [AS_HELP_STRING([--disable-dap-remote-tests], [disable dap remote tests])]) # Default on test "x$enable_dap_remote_tests" = xno || enable_dap_remote_tests=yes if test "x$enable_dap" = "xno" ; then enable_dap_remote_tests=no fi AC_MSG_RESULT($enable_dap_remote_tests) AC_MSG_CHECKING([whether use of external (non-unidata) servers should be enabled]) AC_ARG_ENABLE([external-server-tests], [AS_HELP_STRING([--enable-external-server-tests (default off)], [enable external server tests])]) test "x$enable_external_server_tests" = xyes || enable_external_server_tests=no AC_MSG_RESULT($enable_external_server_tests) if test "x$enable_dap_remote_tests" = "xno" ; then AC_MSG_NOTICE([--disable-dap_remote_tests => --disable-external-server-tests]) enable_external_server_tests=no fi # Default is not to do the remote authorization tests. AC_MSG_CHECKING([whether dap authorization testing should be enabled (default off)]) AC_ARG_ENABLE([dap-auth-tests], [AS_HELP_STRING([--enable-dap-auth-tests], [enable dap remote authorization tests])]) test "x$enable_dap_auth_tests" = xyes || enable_dap_auth_tests=no AC_MSG_RESULT($enable_dap_auth_tests) # dap must be enabled in order to use various other flags if test "x$enable_dap" = "xno" ; then AC_MSG_NOTICE([--disable-dap => --disable-dap-remote-tests --disable-auth-tests --disable-external-server-tests]) enable_dap_remote_tests=no enable_dap_auth_tests=no enable_external_server_tests=no fi # Did the user specify a list of test servers to try for remote tests? AC_MSG_CHECKING([which remote test server(s) to use]) AC_ARG_WITH([testservers], [AS_HELP_STRING([--with-testservers=,...], [Specify the testserver(s) to try for remote tests.])], [REMOTETESTSERVERS=$with_testservers], [REMOTETESTSERVERS=no]) if test "x$REMOTETESTSERVERS" = xno ; then dfaltsvc="remotetest.unidata.ucar.edu" REMOTETESTSERVERS="${dfaltsvc}" fi msg="${REMOTETESTSERVERS}" if test "x$dfaltsvc" != x ; then msg="${msg} (default)" fi AC_MSG_RESULT([${msg}]) AC_DEFINE_UNQUOTED([REMOTETESTSERVERS], ["$REMOTETESTSERVERS"], [the testservers for remote tests.]) # Set the config.h flags if test "x$enable_dap" = xyes; then AC_DEFINE([USE_DAP], [1], [if true, build DAP Client]) AC_DEFINE([ENABLE_DAP], [1], [if true, build DAP Client]) fi if test "x$enable_dap_remote_tests" = xyes; then AC_DEFINE([ENABLE_DAP_REMOTE_TESTS], [1], [if true, do remote tests]) fi if test "x$enable_external_server_tests" = xyes; then AC_DEFINE([ENABLE_EXTERNAL_SERVER_TESTS], [1], [if true, do remote external tests]) fi AC_MSG_CHECKING([whether the time-consuming dap tests should be enabled (default off)]) AC_ARG_ENABLE([dap-long-tests], [AS_HELP_STRING([--enable-dap-long-tests], [enable dap long tests])]) test "x$enable_dap_long_tests" = xyes || enable_dap_long_tests=no AC_MSG_RESULT([$enable_dap_long_tests]) if test "x$enable_dap_remote_tests" = "xno" || test "x$enable_external_server_tests" = "xno" ; then AC_MSG_NOTICE([--disable-dap-remote|external-server-tests => --disable_dap_long_tests]) enable_dap_long_tests=no fi # Control zarr storage if test "x$enable_nczarr" = xyes ; then if test "x$enable_netcdf_4" = xno ; then AC_MSG_WARN([netCDF-4 disabled, so you must not enable nczarr]) enable_nczarr=no fi fi if test "x$enable_nczarr" = xyes; then AC_DEFINE([ENABLE_NCZARR], [1], [if true, build NCZarr Client]) AC_SUBST(ENABLE_NCZARR) fi AM_CONDITIONAL(ENABLE_NCZARR, [test x$enable_nczarr = xyes]) ########## # Look for Standardized libraries ########## ## # blosc checks ## # See if we want to enable blosc, and if so, search for the library. AC_MSG_CHECKING([whether to search for and enable blosc filter support]) AC_ARG_ENABLE([filter-blosc], [AS_HELP_STRING([--disable-filter-blosc], [disable blosc filter support.])]) test "x$enable_filter_blosc" = xno || enable_filter_blosc=yes AC_MSG_RESULT($enable_filter_blosc) if test "x$enable_filter_blosc" = "xyes" ; then # See if we have libblosc AC_CHECK_LIB([blosc],[blosc_init],[have_blosc=yes],[have_blosc=no]) if test "x$have_blosc" = "xyes" ; then AC_SEARCH_LIBS([blosc_init],[blosc blosc.dll cygblosc.dll], [], []) AC_DEFINE([HAVE_BLOSC], [1], [if true, blosc library is available]) fi else have_blosc=no fi ## # End blosc checks ## ## # libzstd checks ## # See if we want to enable libzstd, and if so, search for the library. AC_MSG_CHECKING([whether to search for and enable libzstd filter support]) AC_ARG_ENABLE([filter-zstd], [AS_HELP_STRING([--disable-filter-zstd], [disable zstd filter support.])]) test "x$enable_filter_zstd" = xno || enable_filter_zstd=yes AC_MSG_RESULT($enable_filter_zstd) if test "x$enable_filter_zstd" = "xyes" ; then # See if we have libzstd AC_CHECK_LIB([zstd],[ZSTD_compress],[have_zstd=yes],[have_zstd=no]) if test "x$have_zstd" = "xyes" ; then AC_SEARCH_LIBS([ZSTD_compress],[zstd zstd.dll cygzstd.dll], [], []) AC_DEFINE([HAVE_ZSTD], [1], [if true, zstd library is available]) fi AC_MSG_CHECKING([whether libzstd library is available]) AC_MSG_RESULT([${have_zstd}]) ## # Ensure that the zstd.h dev files are also available. ## if test "x$have_zstd" = "xyes" ; then AC_CHECK_HEADERS([zstd.h], [], [nc_zstd_h_missing=yes]) if test "x$nc_zstd_h_missing" = xyes; then AC_MSG_WARN([zstd library detected, but zstd.h development file not found. Ensure that the zstd development files are installed in order to build zstd support.]) AC_DEFINE([HAVE_ZSTD], [0], [if true, zstd library is available]) have_zstd=no fi fi else have_zstd=no fi ## # End zstd checks ## ## # Begin bz2 checks ## # See if we want to enable BZ2, and if so, search for the library. AC_MSG_CHECKING([whether to search for and enable external bz2 filter support]) AC_ARG_ENABLE([filter-bz2], [AS_HELP_STRING([--disable-filter-bz2], [disable external bz2 filter support. bz2 support defaults to internal implementation if this is disabled or if the external library is not found.])]) test "x$enable_filter_bz2" = xno || enable_filter_bz2=yes AC_MSG_RESULT([$enable_filter_bz2]) if test "x$enable_filter_bz2" = "xyes" ; then AC_CHECK_LIB([bz2],[BZ2_bzCompress],[have_bz2=yes],[have_bz2=no]) if test "x$have_bz2" = "xyes" ; then AC_SEARCH_LIBS([BZ2_bzCompress],[bz2 bz2.dll cygbz2.dll], [], []) AC_DEFINE([HAVE_BZ2], [1], [if true, bz2 library is installed]) fi AC_MSG_CHECKING([whether libbz2 library is available]) AC_MSG_RESULT([${have_bz2}]) fi # How about bzip2 if test "x$have_bz2" = x ; then AC_CHECK_LIB([bzip2],[BZ2_bzCompress],[have_bz2=yes],[have_bz2=no]) if test "x$have_bz2" = "xyes" ; then AC_SEARCH_LIBS([BZ2_bzCompress],[bzip2 bzip2.dll cygbzip2.dll], [], []) AC_DEFINE([HAVE_BZ2], [1], [if true, bzip2 library is installed]) fi AC_MSG_CHECKING([whether libbzip2 library is available]) AC_MSG_RESULT([${have_bz2}]) fi if test "x$have_bz2" = "xno" ; then have_local_bz2=yes AC_MSG_NOTICE([Defaulting to internal libbz2]) else have_local_bz2=no fi AM_CONDITIONAL(HAVE_LOCAL_BZ2, [test "x$have_local_bz2" = xyes]) ## # End bz2 checks ## # Note that szip management is tricky. # This is because we have three things to consider: # 1. is libsz available? # 2. is szip enabled in HDF5? # 3. is nczarr enabled? # We need separate flags for cases 1 and 2 # See if we have libsz (usually via libaec) AC_CHECK_LIB([sz],[SZ_BufftoBuffCompress],[have_sz=yes],[have_sz=no]) if test "x$have_sz" = "xyes" ; then AC_SEARCH_LIBS([SZ_BufftoBuffCompress],[sz sz.dll cygsz.dll], [], []) AC_DEFINE([HAVE_SZ], [1], [if true, libsz (==szip) is available]) fi AC_MSG_CHECKING([whether libsz library is available]) AC_MSG_RESULT([${have_sz}]) ########## ## # Check to see if we're using NCZarr. If not, we don't need to check for dependencies and such. ## if test "x$enable_nczarr" = xno ; then enable_nczarr_zip=no else # See if we have libzip for NCZarr AC_SEARCH_LIBS([zip_open],[zip zip.dll cygzip.dll],[have_zip=yes],[have_zip=no]) AC_MSG_CHECKING([whether libzip library is available]) AC_MSG_RESULT([${have_zip}]) enable_nczarr_zip=${have_zip} # alias AC_MSG_CHECKING([whether nczarr zip support is enabled]) AC_MSG_RESULT([${enable_nczarr_zip}]) if test "x$enable_nczarr_zip" = xyes ; then AC_DEFINE([ENABLE_NCZARR_ZIP], [1], [If true, then libzip found]) fi # Check for enabling of S3 support AC_MSG_CHECKING([whether netcdf S3 support should be enabled]) AC_ARG_ENABLE([s3], [AS_HELP_STRING([--enable-s3], [enable netcdf S3 support])]) test "x$enable_s3" = xyes || enable_s3=no AC_MSG_RESULT($enable_s3) if test "x$enable_remote_functionality" = xno ; then AC_MSG_WARN([--disable-remote-functionality => --disable-s3]) enable_s3=no fi # --enable-nczarr-s3 is synonym for --enable-s3 (but...) AC_MSG_CHECKING([whether netcdf NCZarr S3 support should be enabled]) AC_ARG_ENABLE([nczarr-s3], [AS_HELP_STRING([--enable-nczarr-s3], [(Deprecated) enable netcdf NCZarr S3 support; Deprecated in favor of --enable-s3])]) AC_MSG_RESULT([$enable_nczarr_s3 (Deprecated) Please use --enable-s3)]) # Set enable_s3 instead of enable_nczarr_s3 if test "x$enable_s3" = xno && test "x$enable_nczarr_s3" = xyes && test "x$enable_remote_functionality" = xyes; then enable_s3=yes # back compatibility fi unset enable_nczarr_s3 # Note we check for the library after checking for enable_s3 # because for some reason this fails if we unconditionally test for sdk # and it is not available. Fix someday S3LIBS="" if test "x$enable_s3" = xyes ; then # See if we have the s3 aws library # Check for the AWS S3 SDK library AC_LANG_PUSH([C++]) AC_CHECK_LIB([aws-c-common], [aws_string_destroy], [enable_s3_aws=yes],[enable_s3_aws=no]) if test "x$enable_s3_aws" = "xyes" ; then S3LIBS="-laws-cpp-sdk-core -laws-cpp-sdk-s3" fi AC_LANG_POP else enable_s3_aws=no fi AC_MSG_CHECKING([whether AWS S3 SDK library is available]) AC_MSG_RESULT([$enable_s3_aws]) # Check for enabling forced use of Internal S3 library AC_MSG_CHECKING([whether internal S3 support should be used]) AC_ARG_ENABLE([s3-internal], [AS_HELP_STRING([--enable-s3-internal], [enable internal S3 support])]) test "x$enable_s3_internal" = xyes || enable_s3_internal=no AC_MSG_RESULT($enable_s3_internal) if test "x$enable_s3_aws" = xno && test "x$enable_s3_internal" = xno ; then AC_MSG_WARN([No S3 library available => S3 support disabled]) enable_s3=no fi if test "x$enable_s3_aws" = xyes && test "x$enable_s3_internal" = xyes ; then AC_MSG_WARN([Both aws-sdk-cpp and s3-internal enabled => use s3-internal.]) enable_s3_aws=no fi if test "x$enable_s3_internal" = xyes ; then if test "x$ISOSX" != xyes && test "x$ISMINGW" != xyes && test "x$ISMSVC" != xyes ; then # Find crypto libraries if using ssl AC_CHECK_LIB([ssl],[ssl_create_cipher_list]) AC_CHECK_LIB([crypto],[SHA256]) fi fi # Check for enabling S3 testing AC_MSG_CHECKING([what level of netcdf S3 testing should be enabled]) AC_ARG_WITH([s3-testing], [AS_HELP_STRING([--with-s3-testing=yes|no|public], [control netcdf S3 testing])], [], [with_s3_testing=public]) AC_MSG_RESULT($with_s3_testing) # Disable S3 tests if S3 support is disabled if test "x$enable_s3" = xno ; then if test "x$with_s3_testing" != xno ; then AC_MSG_WARN([S3 support is disabled => no testing]) with_s3_testing=no fi fi if test "x$enable_s3" = xyes ; then AC_DEFINE([ENABLE_S3], [1], [if true, build netcdf-c with S3 support enabled]) fi if test "x$enable_s3_aws" = xyes ; then LIBS="$LIBS$S3LIBS" AC_DEFINE([ENABLE_S3_AWS], [1], [If true, then use aws S3 library]) fi if test "x$enable_s3_internal" = xyes ; then AC_DEFINE([ENABLE_S3_INTERNAL], [1], [If true, then use internal S3 library]) fi AC_DEFINE_UNQUOTED([WITH_S3_TESTING], [$with_s3_testing], [control S3 testing.]) if test "x$with_s3_testing" = xyes ; then AC_MSG_WARN([*** DO NOT SPECIFY WITH_S3_TESTING=YES UNLESS YOU HAVE ACCESS TO THE UNIDATA S3 BUCKET! ***]) AC_DEFINE([ENABLE_S3_TESTALL], [yes], [control S3 testing.]) fi fi # Check whether we want to enable strict null byte header padding. # See https://github.com/Unidata/netcdf-c/issues/657 for more information. AC_MSG_CHECKING([whether to enable strict null-byte header padding when reading (default off)]) AC_ARG_ENABLE([strict-null-byte-header-padding], [AS_HELP_STRING([--enable-strict-null-byte-header-padding], [enable strict null-byte header padding when reading netCDF3 files.])]) test "x$enable_strict_null_byte_header_padding" = xyes || enable_strict_null_byte_header_padding=no AC_MSG_RESULT($enable_strict_null_byte_header_padding) if test "x$enable_strict_null_byte_header_padding" = xyes; then AC_DEFINE([USE_STRICT_NULL_BYTE_HEADER_PADDING], [1], [if true, enable strict null byte header padding]) fi AM_CONDITIONAL(USE_STRICT_NULL_BYTE_HEADER_PADDING, [test x$enable_strict_null_byte_header_padding = xyes ]) # Does the user want to use the ffio module? AC_MSG_CHECKING([whether FFIO will be used]) AC_ARG_ENABLE([ffio], [AS_HELP_STRING([--enable-ffio], [use ffio instead of posixio (ex. on the Cray)])]) test "x$enable_ffio" = xyes || enable_ffio=no AC_MSG_RESULT($enable_ffio) if test "x$enable_ffio" = xyes; then AC_DEFINE([USE_FFIO], [1], [if true, use ffio instead of posixio]) fi AM_CONDITIONAL(USE_FFIO, [test x$enable_ffio = xyes]) # Does the user want to use the stdio module? AC_MSG_CHECKING([whether STDIO will be used]) AC_ARG_ENABLE([stdio], [AS_HELP_STRING([--enable-stdio], [use stdio instead of posixio (ex. on the Cray)])]) test "x$enable_stdio" = xyes || enable_stdio=no AC_MSG_RESULT($enable_stdio) if test "x$enable_stdio" = xyes; then AC_DEFINE([USE_STDIO], [1], [if true, use stdio instead of posixio]) fi AM_CONDITIONAL(USE_STDIO, [test x$enable_stdio = xyes]) nc_build_c=yes nc_build_v2=yes nc_build_utilities=yes nc_build_tests=yes nc_build_examples=yes # Does the user want to build examples? AC_MSG_CHECKING([whether examples should be built]) AC_ARG_ENABLE([examples], [AS_HELP_STRING([--disable-examples], [don't build the netCDF examples during make check \ (examples are treated as extra tests by netCDF)])]) test "x$enable_examples" = xno && nc_build_examples=no AC_MSG_RESULT($nc_build_examples) AM_CONDITIONAL(BUILD_EXAMPLES, [test x$nc_build_examples = xyes]) # Does the user want to disable the V2 API? AC_MSG_CHECKING([whether v2 netCDF API should be built]) AC_ARG_ENABLE([v2], [AS_HELP_STRING([--disable-v2], [turn off the netCDF version 2 API])]) test "x$enable_v2" = xno && nc_build_v2=no AC_MSG_RESULT($nc_build_v2) AM_CONDITIONAL(BUILD_V2, [test x$nc_build_v2 = xyes]) if test "x$nc_build_v2" = xno; then AC_DEFINE_UNQUOTED(NO_NETCDF_2, 1, [do not build the netCDF version 2 API]) else AC_DEFINE_UNQUOTED(USE_NETCDF_2, 1, [build the netCDF version 2 API]) fi # Does the user want to disable ncgen/ncdump/nccopy/...? AC_MSG_CHECKING([whether the ncgen/ncdump/nccopy should be built]) AC_ARG_ENABLE([utilities], [AS_HELP_STRING([--disable-utilities], [don't build netCDF utilities ncgen, ncdump, and nccopy])]) test "x$nc_build_c" = xno && enable_utilities=no test "x$enable_utilities" = xno && nc_build_utilities=no AC_MSG_RESULT($nc_build_utilities) AM_CONDITIONAL(BUILD_UTILITIES, [test x$nc_build_utilities = xyes]) # Does the user want to disable all tests? AC_MSG_CHECKING([whether test should be built and run]) AC_ARG_ENABLE([testsets], [AS_HELP_STRING([--disable-testsets], [don't build or run netCDF tests])]) test "x$enable_testsets" = xno || enable_testsets=yes nc_build_tests=$enable_testsets AC_MSG_RESULT($nc_build_tests) AM_CONDITIONAL(BUILD_TESTSETS, [test x$nc_build_tests = xyes]) # Does the user want to run tests for large files (> 2GiB)? AC_MSG_CHECKING([whether large file (> 2GB) tests should be run]) AC_ARG_ENABLE([large-file-tests], [AS_HELP_STRING([--enable-large-file-tests], [Run tests which create very large data files (~13 GB disk space required, but it will be recovered when tests are complete). See option --with-temp-large to specify temporary directory])]) test "x$enable_large_file_tests" = xyes || enable_large_file_tests=no AC_MSG_RESULT($enable_large_file_tests) AM_CONDITIONAL(LARGE_FILE_TESTS, [test x$enable_large_file_tests = xyes]) if test "x$enable_large_file_tests" = xyes; then AC_DEFINE([LARGE_FILE_TESTS], [1], [do large file tests]) fi # Does the user want to run benchmarks? AC_MSG_CHECKING([whether benchmarks should be run]) AC_ARG_ENABLE([benchmarks], [AS_HELP_STRING([--enable-benchmarks], [Run benchmarks. This will cause sample data files from the Unidata ftp site to be fetched. The benchmarks are a bunch of extra tests, which are timed. We use these tests to check netCDF performance.])]) test "x$enable_benchmarks" = xyes || enable_benchmarks=no AC_MSG_RESULT($enable_benchmarks) if test "x$enable_HDF5" = xno -a "x$enable_benchmarks" = xyes; then AC_MSG_ERROR([Can't use benchmarks if HDF5 is disabled.]) fi AM_CONDITIONAL(BUILD_BENCHMARKS, [test x$enable_benchmarks = xyes]) # Does the user want to use extreme numbers in testing. AC_MSG_CHECKING([whether extreme numbers should be used in tests]) AC_ARG_ENABLE([extreme-numbers], [AS_HELP_STRING([--disable-extreme-numbers], [don't use extreme numbers during testing, such as MAX_INT - 1])]) case "$host_cpu $host_os" in *386*solaris*) test "x$enable_extreme_numbers" = xyes || enable_extreme_numbers=no ;; *) test "x$enable_extreme_numbers" = xno || enable_extreme_numbers=yes ;; esac AC_MSG_RESULT($enable_extreme_numbers) if test "x$enable_extreme_numbers" = xyes; then AC_DEFINE(USE_EXTREME_NUMBERS, 1, [set this to use extreme numbers in tests]) fi # If the env. variable TEMP_LARGE is set, or if # --with-temp-large=, use it as a place for the large # (i.e. > 2 GiB) files created during the large file testing. AC_MSG_CHECKING([where to put large temp files if large file tests are run]) AC_ARG_WITH([temp-large], [AS_HELP_STRING([--with-temp-large=], [specify directory where large files (i.e. >2 GB) \ will be written, if large files tests are run with --enable-large-file-tests])], [TEMP_LARGE=$with_temp_large]) TEMP_LARGE=${TEMP_LARGE-.} AC_MSG_RESULT($TEMP_LARGE) #AC_SUBST(TEMP_LARGE) AC_DEFINE_UNQUOTED([TEMP_LARGE], ["$TEMP_LARGE"], [Place to put very large netCDF test files.]) # Specify extra values to add to _NCProperties attribute # --with-ncproperties-extra="=|...". # Note: need to figure out a way to do this programmatically also AC_MSG_CHECKING([Extra values for _NCProperties]) AC_ARG_WITH([ncproperties-extra], [AS_HELP_STRING([--with-ncproperties-extra="=,...], [specify extra pairs for _NCProperties])], [NCPROPERTIES_EXTRA=$with_ncproperties_extra], [NCPROPERTIES_EXTRA=""]) AC_MSG_RESULT([$NCPROPERTIES_EXTRA]) AC_DEFINE_UNQUOTED([NCPROPERTIES_EXTRA], ["$NCPROPERTIES_EXTRA"], [Extra pairs for _NCProperties]) # Did the user specify a user-defined format 0? AC_MSG_CHECKING([whether user-defined format 0 was specified]) AC_ARG_WITH([udf0], [AS_HELP_STRING([--with-udf0=], [Specify a dispatch table for user-defined format 0.])], [UDF0_DISPATCH=$with_udf0]) AC_MSG_RESULT([$UDF0_DISPATCH]) if test -n "$UDF0_DISPATCH"; then AC_DEFINE_UNQUOTED([UDF0_DISPATCH], [$UDF0_DISPATCH], [dispatch table for user-defined format 0.]) AC_DEFINE_UNQUOTED([UDF0_DISPATCH_FUNC], [get_$UDF0_DISPATCH()], [function to get dispatch table for user-defined format 0.]) AC_DEFINE([USE_UDF0], [1], [if true, use user-defined format 0 in utilities]) AC_CHECK_LIB([$UDF0_DISPATCH], [get_$UDF0_DISPATCH], [], [AC_MSG_ERROR([Can't find or link to the user-defined format 0 library.])], []) fi # Did the user specify a magic number for user-defined format 0? AC_MSG_CHECKING([whether a magic number for user-defined format 0 was specified]) AC_ARG_WITH([udf0-magic-number], [AS_HELP_STRING([--with-udf0-magic-number=], [Specify a magic number for user-defined format 0 (ignored unless --with-udf0 is also used).])], [UDF0_MAGIC_NUMBER=$with_udf0_magic_number]) AC_MSG_RESULT([$UDF0_MAGIC_NUMBER]) # Did the user specify a user-defined format 1? AC_MSG_CHECKING([whether user-defined format 1 was specified]) AC_ARG_WITH([udf1], [AS_HELP_STRING([--with-udf1=], [Specify a dispatch table for user-defined format 1.])], [UDF1_DISPATCH=$with_udf1]) AC_MSG_RESULT([$UDF1_DISPATCH]) if test -n "$UDF1_DISPATCH"; then AC_DEFINE_UNQUOTED([UDF1_DISPATCH], [$UDF1_DISPATCH], [dispatch table for user-defined format 1.]) AC_DEFINE_UNQUOTED([UDF1_DISPATCH_FUNC], [get_$UDF1_DISPATCH()], [function to get dispatch table for user-defined format 1.]) AC_DEFINE([USE_UDF1], [1], [if true, use user-defined format 1 in utilities]) AC_CHECK_LIB([$UDF1_DISPATCH], [get_$UDF1_DISPATCH], [], [AC_MSG_ERROR([Can't find or link to the user-defined format 1 library.])], []) fi # Did the user specify a magic number for user-defined format 0? AC_MSG_CHECKING([whether a magic number for user-defined format 1 was specified]) AC_ARG_WITH([udf1-magic-number], [AS_HELP_STRING([--with-udf1-magic-number=], [Specify a magic number for user-defined format 1 (ignored unless --with-udf1 is also used).])], [UDF1_MAGIC_NUMBER=$with_udf1_magic_number]) AC_MSG_RESULT([$UDF1_MAGIC_NUMBER]) # According to the autoconf mailing list gurus, we must test for # compilers unconditionally. That is, we can't skip looking for the # fortran compilers, just because the user doesn't want fortran. This # is due to a limitation in autoconf. # Find the C compiler. AC_MSG_NOTICE([finding C compiler]) ## Compiler with version information. This consists of the full path ## name of the compiler and the reported version number. AC_SUBST([CC_VERSION]) ## Strip anything that looks like a flag off of $CC CC_NOFLAGS=`echo $CC | sed 's/ -.*//'` if `echo $CC_NOFLAGS | grep ^/ >/dev/null 2>&1`; then CC_VERSION="$CC" else CC_VERSION="$CC"; for x in `echo $PATH | sed -e 's/:/ /g'`; do if test -x $x/$CC_NOFLAGS; then CC_VERSION="$x/$CC" break fi done fi if test -n "$cc_version_info"; then CC_VERSION="$CC_VERSION ( $cc_version_info)" fi AC_PROG_CC AC_PROG_CXX AM_PROG_CC_C_O AC_C_CONST # Set up libtool. AC_MSG_NOTICE([setting up libtool]) LT_PREREQ([2.2]) LT_INIT() AC_MSG_NOTICE([finding other utilities]) # Is m4 installed? If not, bail. AC_CHECK_PROGS([NC_M4], [m4]) if test -z "$NC_M4"; then AC_MSG_ERROR([Cannot find m4 utility. Install m4 and try again.]) fi if test "x$enable_doxygen" != xno; then # Is doxygen installed? If so, have configure construct the Doxyfile. AC_CHECK_PROGS([DOXYGEN], [doxygen]) if test -z "$DOXYGEN"; then AC_MSG_ERROR([Doxygen not found - install doxygen or build without --enable-doxygen]) fi fi # Is graphviz/dot installed? If so, we'll use dot to create # graphs in the documentation. AC_CHECK_PROGS([DOT], [dot]) if test -z "$DOT"; then AC_MSG_WARN([dot not found - will use simple charts in documentation]) HAVE_DOT=NO elif test "x$enable_dot" = xno; then HAVE_DOT=NO else HAVE_DOT=YES fi # If we have doxygen, and it's enabled, then process the file. if test "x$enable_doxygen" != xno; then if test -n "$DOXYGEN"; then AC_SUBST(HAVE_DOT) AC_CONFIG_FILES([docs/Doxyfile]) fi # Note: the list of files to input to doxygen # has been moved to docs/Doxyfile.in so # that make distcheck works correctly. # Any new inputs should be inserted into # docs/Doxyfile.in and possibley docs/Makefile.am fi # Find the install program. AC_PROG_INSTALL # Check to see if any macros must be set to enable large (>2GB) files. AC_SYS_LARGEFILE AC_MSG_NOTICE([displaying some results]) ## This next macro just prints some results for debugging ## support issues. UD_DISPLAY_RESULTS # For nightly build testing, output CC, FC, etc. echo "CPPFLAGS=$CPPFLAGS CC=$CC CFLAGS=$CFLAGS LDFLAGS=$LDFLAGS LIBS=$LIBS" >> comps.txt AC_MSG_NOTICE([checking types, headers, and functions]) AC_CHECK_HEADERS([sys/param.h]) AC_CHECK_HEADERS([libgen.h]) #AC_CHECK_HEADERS([locale.h]) AC_HEADER_STDC AC_CHECK_HEADERS([locale.h stdio.h stdarg.h fcntl.h malloc.h stdlib.h string.h strings.h unistd.h sys/stat.h getopt.h sys/time.h sys/types.h time.h dirent.h stdint.h ctype.h]) # Do sys/resource.h separately #AC_CHECK_HEADERS([sys/resource.h],[havesysresource=1],[havesysresource=0]) #if test "x$enable_dll" != xyes ; then AC_CHECK_HEADERS([sys/resource.h]) #fi # See if we have ftw.h to walk directory trees AC_CHECK_HEADERS([ftw.h]) # Check for these functions... AC_CHECK_FUNCS([strlcat snprintf strcasecmp fileno \ strdup strtoll strtoull \ mkstemp mktemp random \ getrlimit gettimeofday fsync MPI_Comm_f2c MPI_Info_f2c \ strncasecmp strlcpy]) # See if clock_gettime is available and its arg types. AC_CHECK_FUNCS([clock_gettime]) AC_CHECK_TYPES([struct timespec]) # disable dap4 if hdf5 is disabled if test "x$enable_hdf5" = "xno" ; then AC_MSG_WARN([netcdf-4 not enabled; disabling DAP4]) enable_dap4=no fi if test "x$enable_dap4" = xyes; then AC_DEFINE([ENABLE_DAP4], [1], [if true, build DAP4 Client]) fi # check for useful, but not essential, memio support AC_CHECK_FUNCS([memmove getpagesize sysconf]) # Does the user want to allow use of mmap for NC_DISKLESS? AC_MSG_CHECKING([whether mmap is enabled for in-memory files]) AC_ARG_ENABLE([mmap], [AS_HELP_STRING([--enable-mmap], [allow mmap for in-memory files])]) test "x$enable_mmap" = xyes || enable_mmap=no AC_MSG_RESULT($enable_mmap) # check for mmap availability before committing to use mmap have_mmap="$enable_mmap" AC_CHECK_FUNCS([mmap],[havemmapfcn=yes],[havemmapfcn=no]) if test "x$havemmapfcn" = xno ; then have_mmap=no fi # check for mremap availability; not strictly needed AC_CHECK_FUNCS([mremap],[havemremapfcn=yes],[havemmapfcn=no]) # Check for MAP_ANONYMOUS AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [#include ], [[int x = MAP_ANONYMOUS;]])], [havemapanon=yes], [havemapanon=no]) AC_MSG_CHECKING([whether MAP_ANONYMOUS is defined]) AC_MSG_RESULT([${havemapanon}]) if test "x$havemapanon" != xyes ; then have_mmap=no fi if test "x$have_mmap" != xyes ; then if test "x$enable_mmap" = xyes ; then AC_MSG_WARN([mmap functionality is not available: disabling mmap]) else AC_MSG_NOTICE([mmap functionality is not available: disabling mmap]) fi enable_mmap=no fi if test "x$enable_mmap" = xyes; then AC_DEFINE([USE_MMAP], [1], [if true, use mmap for in-memory files]) fi # Does the user want to allow reading of remote data via range headers? AC_MSG_CHECKING([whether byte range support is enabled]) AC_ARG_ENABLE([byterange], [AS_HELP_STRING([--disable-byterange], [allow byte-range I/O])]) test "x$enable_byterange" = xno || enable_byterange=yes AC_MSG_RESULT($enable_byterange) if test "x$enable_remote_functionality" = xno ; then AC_MSG_WARN([--disable-remote-functionality => --disable-byterange]) enable_byterange=no fi # Need curl for byte ranges if test "x$found_curl" = xno && test "x$enable_byterange" = xyes ; then AC_MSG_ERROR([curl required for byte range support. Install curl or build without --enable-byterange.]) enable_byterange=no fi if test "x$enable_byterange" = xyes; then AC_DEFINE([ENABLE_BYTERANGE], [1], [if true, support byte-range read of remote datasets.]) fi # Does the user want to disable atexit? AC_MSG_CHECKING([whether nc_finalize should be invoked at exit]) AC_ARG_ENABLE([atexit-finalize], [AS_HELP_STRING([--disable-atexit-finalize], [disable invoking nc_finalize at exit])]) test "x$enable_atexit_finalize" = xno || enable_atexit_finalize=yes AC_MSG_RESULT($enable_atexit_finalize) # Check for atexit AC_CHECK_FUNCS([atexit]) # If no atexit, then disable atexit finalize if test "x$enable_atexit_finalize" = xyes ; then if test "x$ac_cv_func_function" = xno ; then enable_atexit_finalize=no AC_MSG_ERROR([atexit() required for enable-atexit-finalize.]) fi fi if test "x$enable_atexit_finalize" = xyes ; then AC_DEFINE([ENABLE_ATEXIT_FINALIZE], [1], [If true, enable nc_finalize via atexit()]) fi # Need libdl(d) for plugins AC_CHECK_LIB([dl],[dlopen],[have_libdld=yes],[have_libdld=no]) if test "x$have_libdld" = "xyes" ; then AC_SEARCH_LIBS([dlopen],[dl dld], [],[]) fi # Does the user want plugins? AC_MSG_CHECKING([whether dynamically loaded plugins is enabled]) AC_ARG_ENABLE([plugins], [AS_HELP_STRING([--disable-plugins], [disallow dynamically loaded plugins])]) test "x$enable_plugins" = xno || enable_plugins=yes AC_MSG_RESULT([$enable_plugins]) if test "x$have_libdld" = xno && test "x$ISMSVC" = xno; then enable_plugins=no AC_MSG_WARN([libdld required for enable-plugins.]) fi if test "x$enable_plugins" = xyes && test "x$enable_shared" = xno; then AC_MSG_WARN([--disable-shared => --disable-plugins]) enable_plugins=no fi if test "x$enable_plugins" = xyes; then AC_DEFINE([ENABLE_PLUGINS], [1], [if true, support dynamically loaded plugins]) fi AM_CONDITIONAL(ENABLE_PLUGINS, [test "x$enable_plugins" = xyes]) AC_SUBST(USEPLUGINS, [${enable_plugins}]) AC_FUNC_ALLOCA AC_CHECK_DECLS([isnan, isinf, isfinite],,,[#include ]) AC_STRUCT_ST_BLKSIZE UD_CHECK_IEEE AC_CHECK_TYPES([size_t, ssize_t, schar, uchar, longlong, ushort, uint, int64, uint64, size64_t, ssize64_t, _off64_t, uint64_t, ptrdiff_t]) AC_TYPE_OFF_T AC_TYPE_UINTPTR_T AC_C_CHAR_UNSIGNED AC_C_BIGENDIAN AC_CHECK_TYPES([mode_t]) AM_CONDITIONAL(ISCYGWIN, [test "x$ISCYGWIN" = xyes]) AM_CONDITIONAL(ISMSVC, [test "x$ISMSVC" = xyes]) AM_CONDITIONAL(ISOSX, [test "x$ISOSX" = xyes]) AM_CONDITIONAL(ISMINGW, [test "x$ISMINGW" = xyes]) AM_CONDITIONAL(ISMSYS, [test "x$ISMSYS" = xyes]) AC_SUBST([ISMSVC], [${ISMSVC}]) AC_SUBST([WINVERMAJOR], [${WINVERMAJOR}]) AC_SUBST([WINVERBUILD], [${WINVERBUILD}]) AC_SUBST([ISCYGWIN], [${ISCYGWIN}]) AC_SUBST([ISOSX], [${ISOSX}]) AC_SUBST([ISMINGW], [${ISMINGW}]) AC_SUBST([ISMSYS], [${ISMSYS}]) if test "x$ISMSVC" != x ; then REGEDIT=yes; fi if test "x$ISMSYS" != x ; then REGEDIT=yes; fi if test "x$ISCYGWIN" != x ; then REGEDIT=yes; fi if test "x$REGEDIT" = xyes; then AC_DEFINE([REGEDIT], 1, [dreg.c usable]) fi AM_CONDITIONAL(REGEDIT, [test "x$REGEDIT" = xyes]) AC_SUBST([ISREGEDIT], [yes]) ### # Crude hack to work around an issue # in Cygwin. ### SLEEPCMD="" if test "x$ISCYGWIN" = "xyes"; then SLEEPCMD="sleep 5" AC_MSG_NOTICE([Pausing between sizeof() checks to mitigate a Cygwin issue.]) fi $SLEEPCMD AC_CHECK_SIZEOF(short) $SLEEPCMD AC_CHECK_SIZEOF(int) $SLEEPCMD AC_CHECK_SIZEOF(long) $SLEEPCMD AC_CHECK_SIZEOF(long long) $SLEEPCMD AC_CHECK_SIZEOF(float) $SLEEPCMD AC_CHECK_SIZEOF(double) $SLEEPCMD AC_CHECK_SIZEOF(off_t) $SLEEPCMD AC_CHECK_SIZEOF(size_t) $SLEEPCMD AC_CHECK_SIZEOF(unsigned long long) if test "$ac_cv_sizeof_size_t" -lt "8" ; then if test "x${enable_cdf5}" = xyes ; then dnl unable to support CDF5, but --enable-cdf5 is explicitly set AC_MSG_ERROR([Unable to support CDF5 feature because size_t is less than 8 bytes]) fi enable_cdf5=no else if test "x${enable_cdf5}" != xno ; then enable_cdf5=yes fi fi if test "x${enable_cdf5}" = xyes; then AC_DEFINE([ENABLE_CDF5], [1], [if true, enable CDF5 Support]) fi AM_CONDITIONAL(ENABLE_CDF5, [test x$enable_cdf5 = xyes ]) $SLEEPCMD if test "$ac_cv_type_uchar" = yes ; then AC_CHECK_SIZEOF(uchar) else AC_CHECK_SIZEOF(unsigned char) fi $SLEEPCMD if test "$ac_cv_type_ushort" = yes ; then AC_CHECK_SIZEOF(ushort) else AC_CHECK_SIZEOF(unsigned short int) fi $SLEEPCMD if test "$ac_cv_type_uint" = yes ; then AC_CHECK_SIZEOF(uint) else AC_CHECK_SIZEOF(unsigned int) fi $SLEEPCMD if test "$ac_cv_type_ushort" = yes ; then AC_CHECK_SIZEOF(ushort) else AC_CHECK_SIZEOF(unsigned short int) fi $SLEEPCMD if test "$ac_cv_type_uint" = yes ; then AC_CHECK_SIZEOF(uint) else AC_CHECK_SIZEOF(unsigned int) fi $SLEEPCMD AC_CHECK_SIZEOF(ssize_t) $SLEEPCMD AC_CHECK_SIZEOF([void*]) # Check for deflate library AC_SEARCH_LIBS([deflate], [zlibwapi zlibstat zlib zlib1 z], [have_deflate=yes], [have_deflate=no]) AC_MSG_CHECKING([whether deflate library is available]) AC_MSG_RESULT([${have_deflate}]) if test "x$have_deflate" = xno ; then AC_MSG_ERROR([Can't find or link to the z library. Turn off netCDF-4 and \ DAP and NCZarr clients with --disable-hdf5 --disable-dap --disable-nczarr, or see config.log for errors.]) fi # We need the math library AC_CHECK_LIB([m], [floor], [], [AC_MSG_ERROR([Can't find or link to the math library.])]) if test "x$enable_netcdf_4" = xyes; then AC_DEFINE([USE_NETCDF4], [1], [if true, build netCDF-4]) fi # Set defaults hdf5_parallel=no hdf5_supports_par_filters=no enable_hdf5_szip=no has_hdf5_ros3=no if test "x$enable_hdf5" = xyes; then AC_DEFINE([USE_HDF5], [1], [if true, use HDF5]) AC_DEFINE([H5_USE_16_API], [1], [use HDF5 1.6 API]) # Check for the main hdf5 and hdf5_hl library. AC_SEARCH_LIBS([H5Fflush], [hdf5 hdf5.dll], [], [AC_MSG_ERROR([Can't find or link to the hdf5 library. Use --disable-hdf5, or see config.log for errors.])]) AC_SEARCH_LIBS([H5DSis_scale], [hdf5_hl hdf5_hl.dll], [], [AC_MSG_ERROR([Can't find or link to the hdf5 library. Use --disable-hdf5, or see config.log for errors.])]) AC_CHECK_HEADERS([hdf5.h], [], [AC_MSG_ERROR([Compiling a test with HDF5 failed. Either hdf5.h cannot be found, or config.log should be checked for other reason.])]) # Was HDF5 built with zlib as netCDF requires? AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include "H5public.h"], [[#if !H5_HAVE_ZLIB_H # error #endif] ])], [], [AC_MSG_ERROR([HDF5 was not built with zlib, which is required. Rebuild HDF5 with zlib.])]) # H5Pset_fapl_mpiposix and H5Pget_fapl_mpiposix have been removed since HDF5 1.8.12. # Use H5Pset_fapl_mpio and H5Pget_fapl_mpio, instead. AC_CHECK_FUNCS([H5Pget_fapl_mpio H5Pset_deflate H5Z_SZIP H5Pset_all_coll_metadata_ops H5Literate]) # Check to see if HDF5 library has collective metadata APIs, (HDF5 >= 1.10.0) if test "x$ac_cv_func_H5Pset_all_coll_metadata_ops" = xyes; then AC_DEFINE([HDF5_HAS_COLL_METADATA_OPS], [1], [if true, use collective metadata ops in parallel netCDF-4]) fi # If parallel is available in hdf5, enable it in the C code. Also add some stuff to netcdf.h. if test "x$ac_cv_func_H5Pget_fapl_mpio" = xyes -o "x$ac_cv_func_H5Pget_fapl_mpiposix" = xyes; then hdf5_parallel=yes fi AC_MSG_CHECKING([whether parallel io is enabled in hdf5]) AC_MSG_RESULT([$hdf5_parallel]) # See if H5Dread_chunk is available AC_SEARCH_LIBS([H5Dread_chunk],[hdf5_hldll hdf5_hl], [has_readchunks=yes], [has_readdhunks=no]) # See if hdf5 library supports Read-Only S3 (byte-range) driver AC_SEARCH_LIBS([H5Pset_fapl_ros3],[hdf5_hldll hdf5_hl], [has_hdf5_ros3=yes], [has_hdf5_ros3=no]) if test "x$has_hdf5_ros3" = xyes && test "x$enable_byterange" = xyes; then AC_DEFINE([ENABLE_HDF5_ROS3], [1], [if true, support byte-range using hdf5 virtual file driver.]) fi # Check to see if HDF5 library is 1.10.3 or greater. If so, allows # parallel I/O with filters. This allows zlib/szip compression to # be used with parallel I/O, which is very helpful to HPC users. if test "x$has_readchunks" = xyes; then AC_DEFINE([HDF5_SUPPORTS_PAR_FILTERS], [1], [if true, HDF5 is at least version 1.10.3 and allows parallel I/O with zip]) hdf5_supports_par_filters=yes fi AC_MSG_CHECKING([whether HDF5 allows parallel filters]) AC_MSG_RESULT([$has_readchunks]) # Check to see if user asked for parallel build, but HDF5 does not support it. if test "x$hdf5_parallel" = "xno"; then if test "x$enable_parallel_tests" = "xyes"; then AC_MSG_ERROR([Parallel tests requested, but no parallel HDF5 installation detected.]) fi fi # Check whether HDF5 was built with the SZLIB library. If so we # must be able to link to szip library. AC_MSG_CHECKING([whether szlib was used when building HDF5]) if test "x$ac_cv_func_H5Z_SZIP" = xyes; then enable_hdf5_szip=yes AC_DEFINE([HAVE_H5Z_SZIP], [1], [if true, compile in szip compression in netCDF-4 variables]) fi AC_MSG_RESULT([$enable_hdf5_szip]) # Check to see if HDF5 library is 1.10.6 or greater. # Used to control path name conversion AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ #if (H5_VERS_MAJOR*10000 + H5_VERS_MINOR*100 + H5_VERS_RELEASE < 11006) choke me #endif ]])], [hdf5_version_1106=yes], [hdf5_version_1106=no]) AC_MSG_CHECKING([whether HDF5 library is version 1.10.6 or later]) AC_MSG_RESULT([$hdf5_version_1106]) if test "x$hdf5_version_1106" = xyes; then AC_DEFINE([HDF5_UTF8_PATHS], [1], [if true, HDF5 paths can be utf-8]) fi fi AM_CONDITIONAL(ENABLE_NCDUMPCHUNKS, [test "x$has_readchunks" = xyes ]) # If the user wants hdf4 built in, check it out. if test "x$enable_hdf4" = xyes; then AC_CHECK_LIB([jpeg], [jpeg_CreateCompress], [], [AC_MSG_ERROR([Jpeg library required for --enable-hdf4 builds.])]) AC_CHECK_HEADERS([mfhdf.h], [], [nc_mfhdf_h_missing=yes]) if test "x$nc_mfhdf_h_missing" = xyes; then AC_MSG_ERROR([Cannot find mfhdf.h, yet --enable-hdf4 was used.]) fi AC_CHECK_LIB([df], [Hclose], [], [AC_MSG_ERROR([Can't find or link to the hdf4 df library. See config.log for errors.])]) AC_CHECK_LIB([mfhdf], [NC_arrayfill], [AC_MSG_ERROR([HDF4 library must be built with --disable-netcdf.])], []) AC_CHECK_LIB([mfhdf], [SDcreate], [], [AC_MSG_ERROR([Can't find or link to the hdf4 mfhdf library. See config.log for errors.])]) AC_CHECK_LIB([jpeg], [jpeg_set_quality], [], [AC_MSG_ERROR([Can't find or link to the jpeg library (required by hdf4). See config.log for errors.])]) AC_DEFINE([USE_HDF4], [1], [if true, use HDF4 too]) fi # There are several cases for parallelism: # 1. PnetCDF enabled => we want to parallelism for CDF-1,CDF-2,and CDF-5 # 2. hdf5 has mpio enabled # a. do not want to use it for netcdf4 # b. do want to use it for netcdf4 # Should we provide parallel io for netcdf-4? if test "x$enable_hdf5" = xyes ; then AC_ARG_ENABLE([parallel4], [AS_HELP_STRING([--disable-parallel4], [disable parallel I/O for netcdf-4, even if it's enabled in libhdf5])], [user_set_parallel4=${enableval}]2) test "x$enable_parallel4" = xno || enable_parallel4=yes # If user wants parallel IO for netCDF-4, make sure HDF5 can provide it. if test "x$enable_parallel4" = xyes; then if test "x$hdf5_parallel" = xno; then # If user specifically asked for parallel4, then error out. if test "x$user_set_parallel4" = xyes; then AC_MSG_ERROR([Paralllel IO in netCDF-4 requested, but HDF5 does not provide parallel IO.]) fi # User didn't specify, so disable parallel4 enable_parallel4=no AC_MSG_WARN([Parallel io disabled for netcdf-4 because hdf5 does not support]) fi fi else enable_parallel4=no fi AC_MSG_CHECKING([whether parallel I/O is enabled for netcdf-4]) AC_MSG_RESULT($enable_parallel4) # We have already tested for parallel io in netcdf4 # parallel I/O for CDF-1, 2, and 5 files can also be done through PnetCDF # See if the PnetCDF lib is available and of the # right version (1.6.0 or later) if test "x$enable_pnetcdf" = xyes; then pnetcdf_conflict=no AC_CHECK_LIB([pnetcdf], [ncmpi_create], [],[pnetcdf_conflict=yes]) if test "x$pnetcdf_conflict" = xyes ; then AC_MSG_ERROR([Cannot link to PnetCDF library.]) fi # Pnetcdf did not support utf-8 until 1.6.0 AC_MSG_CHECKING([Is libpnetcdf version 1.6.0 or later?]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ #if (PNETCDF_VERSION_MAJOR*1000 + PNETCDF_VERSION_MINOR < 1006) choke me #endif ]])], [pnetcdf16=yes], [pnetcdf16=no]) AC_MSG_RESULT([$pnetcdf16]) if test x$pnetcdf16 = xno; then AC_MSG_ERROR([--enable-pnetcdf requires version 1.6.0 or later]) fi fi # Now, set enable_parallel if either enable_pnetcdf or enable_parallel4 is set if test "x$enable_pnetcdf" = xyes -o "x$enable_parallel4" = xyes; then enable_parallel=yes else enable_parallel=no fi AM_CONDITIONAL(ENABLE_PARALLEL, [test x$enable_parallel = xyes ]) if test "x$hdf5_parallel" = xyes; then # Provide more precise parallel control AC_DEFINE([HDF5_PARALLEL], [1], [if true, hdf5 has parallelism enabled]) fi # Set config flags if test "x$enable_parallel4" = xyes; then # Provide more precise parallel control AC_DEFINE([USE_PARALLEL4], [1], [if true, parallel netcdf-4 is in use]) fi if test "x$enable_pnetcdf" = xyes; then AC_DEFINE([USE_PNETCDF], [1], [if true, PnetCDF is used]) fi # If enable_parallel is in use, enable it in the C code. Also add some stuff to netcdf.h. if test "x$enable_parallel" = xyes; then AC_DEFINE([USE_PARALLEL], [1], [if true, PnetCDF or parallel netcdf-4 is in use]) fi AC_ARG_ENABLE([erange_fill], [AS_HELP_STRING([--enable-erange-fill], [Enable use of fill value when out-of-range type conversion causes NC_ERANGE error. @<:@default: disabled@:>@])], [enable_erange_fill=${enableval}], [enable_erange_fill=auto] ) # check PnetCDF's settings on enable_erange_fill and relax_coord_bound if test "x$enable_pnetcdf" = xyes; then UD_CHECK_HEADER_PATH([pnetcdf.h]) AC_MSG_CHECKING([if erange-fill is enabled in PnetCDF]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ #if !defined(PNETCDF_ERANGE_FILL) || PNETCDF_ERANGE_FILL == 0 choke me #endif]])], [enable_erange_fill_pnetcdf=yes], [enable_erange_fill_pnetcdf=no]) AC_MSG_RESULT([$enable_erange_fill_pnetcdf]) if test "x$enable_erange_fill" = xauto ; then enable_erange_fill=$enable_erange_fill_pnetcdf elif test "$enable_erange_fill" != "$enable_erange_fill_pnetcdf"; then if test "$enable_erange_fill" = yes; then AC_MSG_ERROR([Enabling erange-fill conflicts with PnetCDF setting]) else AC_MSG_ERROR([Disabling erange-fill conflicts with PnetCDF setting]) fi fi AC_MSG_CHECKING([if relax-coord-bound is enabled in PnetCDF]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ #if !defined(PNETCDF_RELAX_COORD_BOUND) || PNETCDF_RELAX_COORD_BOUND == 0 choke me #endif]])], [relax_coord_bound_pnetcdf=yes], [relax_coord_bound_pnetcdf=no]) AC_MSG_RESULT([$relax_coord_bound_pnetcdf]) if test x"$relax_coord_bound_pnetcdf" != xyes; then AC_MSG_ERROR([PNetCDF must be built with relax-coord-bound]) fi else if test "x$enable_erange_fill" = xauto; then # if --enable-erange-fill is not used, default setting is no enable_erange_fill=no fi fi if test "x$enable_erange_fill" = xyes ; then if test "x$M4FLAGS" = x ; then M4FLAGS="-DERANGE_FILL" else M4FLAGS="$M4FLAGS -DERANGE_FILL" fi AC_DEFINE([ERANGE_FILL], [1], [if true, use _FillValue for NC_ERANGE data elements]) fi AC_SUBST(M4FLAGS) # No logging for netcdf-3. if test "x$enable_netcdf_4" = xno; then enable_logging=no fi if test "x$enable_logging" = xyes; then AC_DEFINE([LOGGING], 1, [If true, turn on logging.]) fi # Control NCZarr filters # Does the user want to use NCZarr filters? AC_MSG_CHECKING([whether we should enable NCZarr filters]) AC_ARG_ENABLE([nczarr-filters], [AS_HELP_STRING([--disable-nczarr-filters], [disable NCZarr filters])]) test "x$enable_nczarr_filters" = xno || enable_nczarr_filters=yes AC_MSG_RESULT([$enable_nczarr_filters]) # Control filter test/example AC_MSG_CHECKING([whether filter testing should be run]) AC_ARG_ENABLE([filter-testing], [AS_HELP_STRING([--disable-filter-testing], [Do not run filter test and example; requires shared libraries and HDF5|NCZarr])]) test "x$enable_filter_testing" = xno || enable_filter_testing=yes AC_MSG_RESULT($enable_filter_testing) # Apply constraints if test "x$enable_plugins" = xno ; then AC_MSG_WARN([--disable-plugins => --disable-nczarr-filters]) enable_nczarr_filters=no fi if test "x$enable_plugins" = xno ; then AC_MSG_WARN([--disable-plugins => --disable-filter-testing]) enable_filter_testing=no fi if test "x$enable_filter_testing" = xno; then AC_MSG_WARN([--disable-filter-testing => --disable-nczarr-filter-testing]) enable_nczarr_filter_testing=no fi if test "x$enable_nczarr" = xno; then AC_MSG_WARN([--disable-nczarr => --disable-nczarr-filters]) enable_nczarr_filters=no enable_nczarr_filter_testing=no fi if test "x$enable_nczarr_filters" = xyes; then AC_DEFINE([ENABLE_NCZARR_FILTERS], [1], [if true, enable NCZarr filters]) fi # Client side filter registration is permanently disabled enable_clientside_filters=no AM_CONDITIONAL(ENABLE_CLIENTSIDE_FILTERS, [test x$enable_clientside_filters = xyes]) AM_CONDITIONAL(ENABLE_FILTER_TESTING, [test x$enable_filter_testing = xyes]) AM_CONDITIONAL(ENABLE_NCZARR_FILTERS, [test x$enable_nczarr_filters = xyes]) # Automake conditionals need to be called, whether the answer is yes # or no. AM_CONDITIONAL(BUILD_PARALLEL, [test x$enable_parallel = xyes]) AM_CONDITIONAL(TEST_PARALLEL4, [test "x$enable_parallel4" = xyes -a "x$enable_parallel_tests" = xyes]) AM_CONDITIONAL(BUILD_DAP, [test "x$enable_dap" = xyes]) AM_CONDITIONAL(USE_DAP, [test "x$enable_dap" = xyes]) # Alias # Provide protocol specific flags AM_CONDITIONAL(ENABLE_DAP, [test "x$enable_dap" = xyes]) AM_CONDITIONAL(ENABLE_DAP4, [test "x$enable_dap4" = xyes]) AM_CONDITIONAL(USE_STRICT_NULL_BYTE_HEADER_PADDING, [test x$enable_strict_null_byte_header_padding = xyes]) AM_CONDITIONAL(ENABLE_CDF5, [test "x$enable_cdf5" = xyes]) AM_CONDITIONAL(ENABLE_DAP_REMOTE_TESTS, [test "x$enable_dap_remote_tests" = xyes]) AM_CONDITIONAL(ENABLE_EXTERNAL_SERVER_TESTS, [test "x$enable_external_server_tests" = xyes]) AM_CONDITIONAL(ENABLE_DAP_AUTH_TESTS, [test "x$enable_dap_auth_tests" = xyes]) AM_CONDITIONAL(ENABLE_DAP_LONG_TESTS, [test "x$enable_dap_long_tests" = xyes]) AM_CONDITIONAL(USE_PNETCDF_DIR, [test ! "x$PNETCDFDIR" = x]) AM_CONDITIONAL(USE_LOGGING, [test "x$enable_logging" = xyes]) AM_CONDITIONAL(CROSS_COMPILING, [test "x$cross_compiling" = xyes]) AM_CONDITIONAL(USE_NETCDF4, [test x$enable_netcdf_4 = xyes]) AM_CONDITIONAL(USE_HDF5, [test x$enable_hdf5 = xyes]) AM_CONDITIONAL(USE_HDF4, [test x$enable_hdf4 = xyes]) AM_CONDITIONAL(USE_HDF4_FILE_TESTS, [test x$enable_hdf4_file_tests = xyes]) AM_CONDITIONAL(USE_RENAMEV3, [test x$enable_netcdf_4 = xyes -o x$enable_dap = xyes]) AM_CONDITIONAL(USE_PNETCDF, [test x$enable_pnetcdf = xyes]) AM_CONDITIONAL(USE_DISPATCH, [test x$enable_dispatch = xyes]) AM_CONDITIONAL(BUILD_MMAP, [test x$enable_mmap = xyes]) AM_CONDITIONAL(BUILD_DOCS, [test x$enable_doxygen = xyes]) AM_CONDITIONAL(SHOW_DOXYGEN_TAG_LIST, [test x$enable_doxygen_tasks = xyes]) AM_CONDITIONAL(ENABLE_METADATA_PERF, [test x$enable_metadata_perf = xyes]) AM_CONDITIONAL(ENABLE_BYTERANGE, [test "x$enable_byterange" = xyes]) AM_CONDITIONAL(RELAX_COORD_BOUND, [test "xyes" = xyes]) AM_CONDITIONAL(HAS_PAR_FILTERS, [test x$hdf5_supports_par_filters = xyes ]) # We need to simplify the set of S3 and Zarr flag combinations AM_CONDITIONAL(ENABLE_S3, [test "x$enable_s3" = xyes]) AM_CONDITIONAL(ENABLE_S3_AWS, [test "x$enable_s3_aws" = xyes]) AM_CONDITIONAL(ENABLE_S3_INTERNAL, [test "x$enable_s3_internal" = xyes]) AM_CONDITIONAL(ENABLE_NCZARR, [test "x$enable_nczarr" = xyes]) AM_CONDITIONAL(ENABLE_S3_TESTPUB, [test "x$with_s3_testing" != xno]) # all => public AM_CONDITIONAL(ENABLE_S3_TESTALL, [test "x$with_s3_testing" = xyes]) AM_CONDITIONAL(ENABLE_NCZARR_ZIP, [test "x$enable_nczarr_zip" = xyes]) AM_CONDITIONAL(HAVE_DEFLATE, [test "x$have_deflate" = xyes]) AM_CONDITIONAL(HAVE_SZ, [test "x$have_sz" = xyes]) AM_CONDITIONAL(HAVE_H5Z_SZIP, [test "x$enable_hdf5_szip" = xyes]) AM_CONDITIONAL(HAVE_BLOSC, [test "x$have_blosc" = xyes]) AM_CONDITIONAL(HAVE_BZ2, [test "x$have_bz2" = xyes]) AM_CONDITIONAL(HAVE_ZSTD, [test "x$have_zstd" = xyes]) # If the machine doesn't have a long long, and we want netCDF-4, then # we've got problems! if test "x$enable_netcdf_4" = xyes; then AC_TYPE_LONG_LONG_INT AC_TYPE_UNSIGNED_LONG_LONG_INT dnl if test ! "x$ac_cv_type_long_long_int" = xyes -o ! "x$ac_cv_type_unsigned_long_long_int" = xyes; then dnl AC_MSG_ERROR([This platform does not support long long types. These are required for netCDF-4.]) dnl fi fi # Create the file name for a "make ftpbin" which is used to generate a # binary distribution. For each release we generate binary releases on # the thousands of machines in Unidata's vast underground complex at # an undisclosed location in the Rocky Mountains. The binary # distributions, along with the 25-foot thick cement slabs and the # giant springs, will help distribute netCDF even after a catastrophic # meteor strike. AC_MSG_CHECKING([what to call the output of the ftpbin target]) BINFILE_NAME=binary-netcdf-$PACKAGE_VERSION test "x$enable_netcdf_4" = xno && BINFILE_NAME=${BINFILE_NAME}_nc3 BINFILE_NAME=${BINFILE_NAME}.tar AC_SUBST(BINFILE_NAME) AC_MSG_RESULT([$BINFILE_NAME $FC $CXX]) ## # Bugfix for Cygwin. ## AC_MSG_CHECKING([if libtool needs -no-undefined flag to build shared libraries]) NOUNDEFINED="" case "`uname`" in CYGWIN*|MINGW*|AIX*) ## Add in the -no-undefined flag to LDFLAGS for libtool. AC_MSG_RESULT([yes]) NOUNDEFINED=" -no-undefined" ;; *) ## Don't add anything AC_MSG_RESULT([no]) ;; esac AC_MSG_CHECKING([value of LIBS]) AC_MSG_RESULT([$LIBS]) # Flags for nc-config script; by design $prefix, $includir, $libdir, # etc. are left as shell variables in the script so as to facilitate # relocation if test "x$with_netcdf_c_lib" = x ; then NC_LIBS="-lnetcdf" else NC_LIBS="$with_netcdf_c_lib" fi if test "x$enable_shared" != xyes; then NC_LIBS="$LDFLAGS $NC_LIBS $LIBS" fi case "x$target_os" in xsolaris*) NEWNCLIBS="" for x in $NC_LIBS ; do case "$x" in -L*) r=`echo "$x" | sed -e 's|^-L|-R|'` NEWNCLIBS="$NEWNCLIBS $x $r" ;; *) NEWNCLIBS="$NEWNCLIBS $x" ;; esac done NC_LIBS="$NEWNCLIBS" ;; *);; esac NC_FLIBS="-lnetcdff $NC_LIBS" AC_SUBST(NC_LIBS,[$NC_LIBS]) AC_SUBST(HAS_DAP,[$enable_dap]) AC_SUBST(HAS_DAP2,[$enable_dap]) AC_SUBST(HAS_DAP4,[$enable_dap4]) AC_SUBST(HAS_NC2,[$nc_build_v2]) AC_SUBST(HAS_NC4,[$enable_netcdf_4]) AC_SUBST(HAS_CDF5,[$enable_cdf5]) AC_SUBST(HAS_HDF4,[$enable_hdf4]) AC_SUBST(HAS_BENCHMARKS,[$enable_benchmarks]) AC_SUBST(HAS_HDF5,[$enable_hdf5]) AC_SUBST(HAS_PNETCDF,[$enable_pnetcdf]) AC_SUBST(HAS_LOGGING, [$enable_logging]) AC_SUBST(HAS_PARALLEL,[$enable_parallel]) AC_SUBST(HAS_PARALLEL4,[$enable_parallel4]) AC_SUBST(HAS_DISKLESS,[yes]) AC_SUBST(HAS_MMAP,[$enable_mmap]) AC_SUBST(HAS_JNA,[$enable_jna]) AC_SUBST(HAS_ERANGE_FILL,[$enable_erange_fill]) AC_SUBST(HAS_BYTERANGE,[$enable_byterange]) AC_SUBST(RELAX_COORD_BOUND,[yes]) AC_SUBST([HAS_PAR_FILTERS], [$hdf5_supports_par_filters]) AC_SUBST(HAS_S3,[$enable_s3]) AC_SUBST(HAS_S3_AWS,[$enable_s3_aws]) AC_SUBST(HAS_S3_INTERNAL,[$enable_s3_internal]) AC_SUBST(HAS_HDF5_ROS3,[$has_hdf5_ros3]) AC_SUBST(HAS_NCZARR,[$enable_nczarr]) AC_SUBST(ENABLE_S3_TESTING,[$with_s3_testing]) AC_SUBST(HAS_NCZARR_ZIP,[$enable_nczarr_zip]) AC_SUBST(DO_NCZARR_ZIP_TESTS,[$enable_nczarr_zip]) AC_SUBST(HAS_QUANTIZE,[$enable_quantize]) AC_SUBST(HAS_LOGGING,[$enable_logging]) AC_SUBST(DO_FILTER_TESTS,[$enable_filter_testing]) AC_SUBST(HAS_DEFLATE,[$have_deflate]) AC_SUBST(HAS_SZLIB,[$have_sz]) AC_SUBST(HAS_SZLIB_WRITE, [$have_sz]) AC_SUBST(HAS_ZSTD,[$have_zstd]) AC_SUBST(DO_LARGE_TESTS,[$enable_large_file_tests]) AC_SUBST(DO_REMOTE_FUNCTIONALITY,[$enable_remote_functionality]) if test "x$enable_s3_aws" = xyes ; then AC_SUBST(WHICH_S3_SDK,[aws-sdk-cpp]) fi if test "x$enable_s3_internal" = xyes; then AC_SUBST(WHICH_S3_SDK,[internal]) fi if test "x$enable_s3_aws" = xno && test "x$enable_s3_internal" = xno; then AC_SUBST(WHICH_S3_SDK,[none]) fi # The Unidata testing S3 bucket # WARNING: this must match the value in CMakeLists.txt AC_DEFINE([S3TESTBUCKET], ["unidata-zarr-test-data"], [S3 test bucket]) AC_SUBST([S3TESTBUCKET],["unidata-zarr-test-data"]) # The working S3 path tree within the Unidata bucket. # WARNING: this must match the value in CMakeLists.txt AC_DEFINE([S3TESTSUBTREE], ["netcdf-c"], [S3 test path prefix]) AC_SUBST([S3TESTSUBTREE],[netcdf-c]) # Build a small unique id to avoid interference on same platform PLATFORMUID="$RANDOM" # Make sure uid > 0 PLATFORMUID=$((PLATFORMUID % 1000 + 1)) # Build a unique id based on the date TESTUID=`date +%s` AC_DEFINE_UNQUOTED([TESTUID], [${TESTUID}], [S3 working path]) AC_SUBST([TESTUID],${TESTUID}) AC_SUBST([PLATFORMUID],${PLATFORMUID}) # Always available std_filters="bz2" if test "x$have_deflate" = xyes ; then std_filters="${std_filters} deflate" fi if test "x$have_sz" = xyes ; then std_filters="${std_filters} szip" fi if test "x$have_blosc" = xyes ; then std_filters="${std_filters} blosc" fi if test "x$have_zstd" = xyes ; then std_filters="${std_filters} zstd" fi AC_SUBST(STD_FILTERS,[$std_filters]) # If user wants, then install selected standard filters AC_MSG_CHECKING([whether and where we should install plugins]) AC_ARG_WITH([plugin-dir], [AS_HELP_STRING([--with-plugin-dir=|no|--without-plugin-dir], [Install selected standard filters in specified or default directory])], [],[with_plugin_dir=no]) AC_MSG_RESULT([$with_plugin_dir]) if test "x$with_plugin_dir" = xno ; then # option missing|disabled with_plugin_dir=no with_plugin_dir_setting="N.A." enable_plugin_dir=no elif test "x$with_plugin_dir" = xyes ; then # --with-plugin-dir, no argument # Default to last dir (lowest search priority) in HDF5_PLUGIN_PATH PLUGIN_PATH="$HDF5_PLUGIN_PATH" if test "x${PLUGIN_PATH}" = x ; then if test "x$ISMSVC" = xyes || test "x$ISMINGW" = xyes; then PLUGIN_PATH="${ALLUSERSPROFILE}\\hdfd5\\lib\\plugin" else PLUGIN_PATH="/usr/local/hdf5/lib/plugin" fi fi # Use the lowest priority dir in the path if test "x$ISMSVC" = xyes || test "x$ISMINGW" = xyes; then PLUGIN_DIR=`echo "$PLUGIN_PATH" | tr ';' ' '` else PLUGIN_DIR=`echo "$PLUGIN_PATH" | tr ':' ' '` fi for pp in ${PLUGIN_DIR} ; do last="$pp"; done PLUGIN_DIR="$last" with_plugin_dir_setting="$PLUGIN_DIR" # canonical form is all forward slashes with_plugin_dir=`echo "$PLUGIN_DIR" | tr '\\\\' '/'` enable_plugin_dir=yes AC_MSG_NOTICE([Defaulting to --with-plugin-dir=$with_plugin_dir]) else # --with-plugin-dir= with_plugin_dir_setting="$with_plugin_dir" enable_plugin_dir=yes fi AM_CONDITIONAL([ENABLE_PLUGIN_DIR], [test "x$enable_plugin_dir" = xyes]) AC_SUBST([PLUGIN_INSTALL_DIR], [$with_plugin_dir]) # Better value for libnetcdf.settings AC_SUBST([PLUGIN_INSTALL_DIR_SETTING], [$with_plugin_dir_setting]) # Access netcdf specific version of config.h AH_BOTTOM([#include "ncconfigure.h"]) ################################################## # Uncomment this to keep a copy of autoconf defines at this point, for # debugging purposes. # cp confdefs.h my_config.h ##### # Create output variables from various # shell variables, for use in generating # libnetcdf.settings. ##### AC_SUBST([enable_shared]) AC_SUBST([enable_static]) AC_SUBST([CFLAGS]) AC_SUBST([CPPFLAGS]) AC_SUBST([LDFLAGS]) AC_SUBST([AM_CFLAGS]) AC_SUBST([AM_CPPFLAGS]) AC_SUBST([AM_LDFLAGS]) AC_SUBST([NOUNDEFINED]) # Args: # 1. netcdf_meta.h variable # 2. conditional variable that is yes or no. # 3. default condition # # example: AX_SET_META([NC_HAS_NC2],[$nc_build_v2],[]) # Because it checks for no. # AX_SET_META([NC_HAS_HDF4],[$enable_hdf4],[yes]) AC_DEFUN([AX_SET_META],[ if [ test "x$2" = "x$3" ]; then AC_SUBST([$1]) $1=1 else AC_SUBST([$1]) $1=0 fi ]) ##### # Define values used in include/netcdf_meta.h ##### AC_SUBST([NC_VERSION]) NC_VERSION=$VERSION AX_SET_META([NC_HAS_NC2],[$nc_build_v2],[yes]) AX_SET_META([NC_HAS_NC4],[$enable_netcdf_4],[yes]) AX_SET_META([NC_HAS_HDF4],[$enable_hdf4],[yes]) AX_SET_META([NC_HAS_BENCHMARKS],[$enable_benchmarks],[yes]) AX_SET_META([NC_HAS_HDF5],[$enable_hdf5],[yes]) AX_SET_META([NC_HAS_DAP2],[$enable_dap],[yes]) AX_SET_META([NC_HAS_DAP4],[$enable_dap4],[yes]) AX_SET_META([NC_HAS_DISKLESS],[yes],[yes]) AX_SET_META([NC_HAS_MMAP],[$enable_mmap],[yes]) AX_SET_META([NC_HAS_JNA],[$enable_jna],[yes]) AX_SET_META([NC_HAS_PNETCDF],[$enable_pnetcdf],[yes]) AX_SET_META([NC_HAS_PARALLEL],[$enable_parallel],[yes]) AX_SET_META([NC_HAS_PARALLEL4],[$enable_parallel4],[yes]) AX_SET_META([NC_HAS_CDF5],[$enable_cdf5],[yes]) AX_SET_META([NC_HAS_ERANGE_FILL], [$enable_erange_fill],[yes]) AX_SET_META([NC_HAS_PAR_FILTERS], [$hdf5_supports_par_filters],[yes]) AX_SET_META([NC_HAS_BYTERANGE],[$enable_byterange],[yes]) AX_SET_META([NC_HAS_S3],[$enable_s3],[yes]) AX_SET_META([NC_HAS_S3_AWS],[$enable_s3_aws],[yes]) AX_SET_META([NC_HAS_S3_INTERNAL],[$enable_s3_internal],[yes]) AX_SET_META([NC_HAS_HDF5_ROS3],[$has_hdf5_ros3],[yes]) AX_SET_META([NC_HAS_NCZARR],[$enable_nczarr],[yes]) AX_SET_META([NC_HAS_LOGGING],[$enable_logging],[yes]) AX_SET_META([NC_HAS_QUANTIZE],[$enable_quantize],[yes]) AX_SET_META([NC_HAS_SZIP],[$enable_hdf5_szip],[yes]) AX_SET_META([NC_HAS_ZSTD],[$have_zstd],[yes]) AX_SET_META([NC_HAS_BLOSC],[$have_blosc],[yes]) AX_SET_META([NC_HAS_BZ2],[$have_bz2],[yes]) # This is the version of the dispatch table. If the dispatch table is # changed, this should be incremented, so that user-defined format # applications like PIO can determine whether they have an appropriate # dispatch table to submit. If this is changed, make sure the value in # CMakeLists.txt also changes to match. AC_SUBST([NC_DISPATCH_VERSION], [5]) AC_DEFINE_UNQUOTED([NC_DISPATCH_VERSION], [${NC_DISPATCH_VERSION}], [Dispatch table version.]) ##### # End netcdf_meta.h definitions. ##### # This would be true for a cmake build. AC_SUBST([ISCMAKE], []) # Provide true/false conditionals to temporarily suppress tests and such AM_CONDITIONAL([AX_DISABLE], [test xno = xyes]) AM_CONDITIONAL([AX_ENABLE], [test xyes = xyes]) # Provide conditional to identify tests that must be run manually AM_CONDITIONAL([AX_MANUAL], [test xno = xyes]) AC_MSG_NOTICE([generating header files and makefiles]) AC_CONFIG_FILES(test_common.sh:test_common.in) AC_CONFIG_FILES(s3cleanup.sh:s3cleanup.in, [chmod ugo+x s3cleanup.sh]) AC_CONFIG_FILES(s3gc.sh:s3gc.in, [chmod ugo+x s3gc.sh]) AC_CONFIG_FILES(nc_test4/findplugin.sh:nc_test4/findplugin.in, [chmod ugo+x nc_test4/findplugin.sh]) AC_CONFIG_FILES(nczarr_test/findplugin.sh:nc_test4/findplugin.in, [chmod ugo+x nczarr_test/findplugin.sh]) AC_CONFIG_FILES(plugins/findplugin.sh:nc_test4/findplugin.in, [chmod ugo+x plugins/findplugin.sh]) AC_CONFIG_FILES(examples/C/findplugin.sh:nc_test4/findplugin.in, [chmod ugo+x examples/C/findplugin.sh]) AC_CONFIG_FILES(ncdap_test/findtestserver.c:ncdap_test/findtestserver.c.in, [chmod ugo+x ncdap_test/findtestserver.c]) AC_CONFIG_FILES([nc_test/run_pnetcdf_tests.sh:nc_test/run_pnetcdf_tests.sh.in],[chmod ugo+x nc_test/run_pnetcdf_tests.sh]) AC_CONFIG_FILES(dap4_test/findtestserver4.c:ncdap_test/findtestserver.c.in) AC_CONFIG_FILES(dap4_test/pingurl4.c:ncdap_test/pingurl.c) AC_CONFIG_FILES([h5_test/run_par_tests.sh], [chmod ugo+x h5_test/run_par_tests.sh]) AC_CONFIG_FILES([nc_test4/run_par_test.sh], [chmod ugo+x nc_test4/run_par_test.sh]) AC_CONFIG_FILES([nc_perf/run_par_bm_test.sh], [chmod ugo+x nc_perf/run_par_bm_test.sh]) AC_CONFIG_FILES([nc_perf/run_gfs_test.sh], [chmod ugo+x nc_perf/run_gfs_test.sh]) AC_CONFIG_FILES(nczarr_test/timer_utils.h:unit_test/timer_utils.h) AC_CONFIG_FILES(nczarr_test/timer_utils.c:unit_test/timer_utils.c) AC_CONFIG_FILES(nczarr_test/test_filter.c:nc_test4/test_filter.c) AC_CONFIG_FILES(nczarr_test/test_filter_misc.c:nc_test4/test_filter_misc.c) AC_CONFIG_FILES(nczarr_test/tst_multifilter.c:nc_test4/tst_multifilter.c) AC_CONFIG_FILES(nczarr_test/test_filter_repeat.c:nc_test4/test_filter_repeat.c) AC_CONFIG_FILES(nczarr_test/test_filter_order.c:nc_test4/test_filter_order.c) AC_CONFIG_FILES([examples/C/run_par_test.sh], [chmod ugo+x examples/C/run_par_test.sh]) AC_CONFIG_FILES([nc-config], [chmod 755 nc-config]) AC_CONFIG_FILES([Makefile netcdf.pc libnetcdf.settings include/netcdf_meta.h include/netcdf_dispatch.h include/Makefile h5_test/Makefile hdf4_test/Makefile libsrc/Makefile libsrc4/Makefile libhdf5/Makefile libsrcp/Makefile ncdump/Makefile ncgen3/Makefile ncgen/Makefile examples/Makefile examples/C/Makefile examples/CDL/Makefile oc2/Makefile libdap2/Makefile libdap4/Makefile libhdf4/Makefile libnczarr/Makefile libncpoco/Makefile libncxml/Makefile libdispatch/Makefile liblib/Makefile ncdump/cdl/Makefile ncdump/expected/Makefile docs/Makefile docs/images/Makefile unit_test/Makefile nctest/Makefile nc_test4/Makefile nc_perf/Makefile nc_test/Makefile ncdap_test/Makefile ncdap_test/testdata3/Makefile ncdap_test/expected3/Makefile ncdap_test/expectremote3/Makefile ncdap_test/expectedhyrax/Makefile dap4_test/Makefile plugins/Makefile nczarr_test/Makefile ]) AC_OUTPUT() cat libnetcdf.settings