This PR started as an attempt to add unlimited dimensions to NCZarr.
It did that, but this exposed significant problems with test interference.
So this PR is mostly about fixing -- well mitigating anyway -- test
interference.
The problem of test interference is now documented in the document docs/internal.md.
The solutions implemented here are also describe in that document.
The solution is somewhat fragile but multiple cleanup mechanisms
are provided. Note that this feature requires that the
AWS command line utility must be installed.
## Unlimited Dimensions.
The existing NCZarr extensions to Zarr are modified to support unlimited dimensions.
NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group".
Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms
Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2.
* Form 1: An integer representing the size of the dimension, which is used for simple named dimensions.
* Form 2: A dictionary with the following keys and values"
- "size" with an integer value representing the (current) size of the dimension.
- "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension.
For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases.
That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension.
This is the standard semantics for unlimited dimensions.
Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following.
* Did a partial refactor of the slice handling code in zwalk.c to clean it up.
* Added a number of tests for unlimited dimensions derived from the same test in nc_test4.
* Added several NCZarr specific unlimited tests; more are needed.
* Add test of endianness.
## Misc. Other Changes
* Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the
AWS Transfer Utility mechanism. This is controlled by the
```#define TRANSFER```` command in that file. It defaults to being disabled.
* Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE).
* Fixed an obscure memory leak in ncdump.
* Removed some obsolete unit testing code and test cases.
* Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c.
* Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4.
* Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects.
* Modify the semantics of zodom to properly handle stride > 1.
* Add a truncate operation to the libnczarr zmap code.
re: https://github.com/Unidata/netcdf-c/issues/2733
When addressing the above issue, I noticed that there was a disconnect
in NCZarr between nc_set_chunk_cache and nc_set_var_chunk cache.
Specifically, setting nc_set_chunk_cache had no impact on the per-variable cache parameters when nc_set_var_chunk_cache was not used.
So, modified the NCZarr code so that the per-variable cache parameters are set in this order (#1 is first choice):
1. The values set by nc_set_var_chunk_cache
2. The values set by nc_set_chunk_cache
3. The defaults set by configure.ac
re: PR https://github.com/Unidata/netcdf-c/pull/2710
Apparently (see above PR) tinyxml2 now works under OS/X.
So this PR is a follow on to the above PR. It modifies
our OS/X github action to test tinyxml2 under OS/X.
Add the option "--disable-network-access" (automake)
or "-DENABLE_NETWORK_ACCESS=OFF" (cmake).
When disabled, this option transitively disables all
network access capabilities and testing.
If set, this option implies the following:
* --disable-dap
* --disable-byterange
* --disable-s3
This PR answers a request for a feature from Ed Hartnett.
## Misc. Other changes
* Take the opportunity to clean up some old, unused options;
e.g. --enable-multifilters.
* Fix bug in using S3 urls.
re: Issue https://github.com/Unidata/netcdf-c/issues/2685
re: PR https://github.com/Unidata/netcdf-c/pull/2179
As noted in PR https://github.com/Unidata/netcdf-c/pull/2179,
the old code did not allow for reclaiming instances of types,
nor for properly copying them. That PR provided new functions
capable of reclaiming/copying instances of arbitrary types.
However, as noted by Issue https://github.com/Unidata/netcdf-c/issues/2685, using these
most general functions resulted in a significant performance
degradation, even for common cases.
This PR attempts to mitigate the cost of using the general
reclaim/copy functions in two ways.
First, the previous functions operating at the top level by
using ncid and typeid arguments. These functions were augmented
with equivalent versions that used the netcdf-c library internal
data structures to allow direct access to needed information.
These new functions are used internally to the library.
The second mitigation involves optimizing the internal functions
by providing early tests for common cases. This avoids
unnecessary recursive function calls.
The overall result is a significant improvement in speed by a
factor of roughly twenty -- your mileage may vary. These
optimized functions are still not as fast as the original (more
limited) functions, but they are getting close. Additional optimizations are
possible. But the cost is a significant "uglification" of the
code that I deemed a step too far, at least for now.
## Misc. Changes
1. Added a test case to check the proper reclamation/copy of complex types.
2. Found and fixed some places where nc_reclaim/copy should have been used.
3. Replaced, in the netcdf-c library, (almost all) occurrences of nc_reclaim_copy with calls to NC_reclaim/copy. This plus the optimizations is the primary speed-up mechanism.
4. In DAP4, the metadata is held in a substrate in-memory file; this required some changes so that the reclaim/copy code accessed that substrate dispatcher rather than the DAP4 dispatcher.
5. Re-factored and isolated the code that computes if a type is (transitively) variable-sized or not.
6. Clean up the reclamation code in ncgen; adding the use of nc_reclaim exposed some memory problems.
It turns out that attempting to test S3 using a github action secret is a very complex process. So, this was disabled for github actions. However, a new *run_tests_s3.yml* action file was added that will eventually encapsulate S3 testing.
re: Issue https://github.com/Unidata/netcdf4-python/issues/1246
This provides a **partial** solution to the above PR.
The underlying problem is with libcurl, but at least a
workaround should be possible by creating a "~/.ncrc" file
containing the line "HTTP.SSL_CAINFO=\<path to the cert (.crt) file\>".
This was not working for obscure reasons. This PR should fix it.
## Misc. Other Changes
* Update/fix configure.ac to properly test for libcurl version >= 7.66.0
* Update include/netcdf_json.h
* Remove use of strlcat from plugins.
* Fix applicability of .rc file entries
## Improvements to S3 Documentation
* Create a new document *quickstart_paths.md* that give a summary of the legal path formats used by netcdf-c. This includes both file paths and URL paths.
* Modify *nczarr.md* to remove most of the S3 related text.
* Move the S3 text from *nczarr.md* to a new document *cloud.md*.
* Add some S3-related text to the *byterange.md* document.
Hopefully, this will make it easier for users to find the information they want.
## Rebuild NCZarr Testing
In order to avoid problems with running make check in parallel, two changes were made:
1. The *nczarr_test* test system was rebuilt. Now, for each test.
any generated files are kept in a test-specific directory, isolated
from all other test executions.
2. Similarly, since the S3 test bucket is shared, any generated S3 objects
are isolated using a test-specific key path.
## Other S3 Related Changes
* Add code to ensure that files created on S3 are reclaimed at end of testing.
* Used the bash "trap" command to ensure S3 cleanup even if the test fails.
* Cleanup the S3 related configure.ac flag set since S3 is used in several places. So now one should use the option *--enable-s3* instead of *--enable-nczarr-s3*, although the latter is still kept as a deprecated alias for the former.
* Get some of the github actions yml to work with S3; required fixing various test scripts adding a secret to access the Unidata S3 bucket.
* Cleanup S3 portion of libnetcdf.settings.in and netcdf_meta.h.in and test_common.in.
* Merge partial S3 support into dhttp.c.
* Create an experimental s3 access library especially for use with Windows. It is enabled by using the options *--enable-s3-internal* (automake) or *-DENABLE_S3_INTERNAL=ON* (CMake). Also add a unit-test for it.
* Move some definitions from ncrc.h to ncs3sdk.h
## Other Changes
* Provide a default implementation of strlcpy and move this and similar defaults into *dmissing.c*.
