re: Github issue https://github.com/Unidata/netcdf-c/issues/1956
The function NC_compare_nc_types in libdispatch/dcopy.c uses an
incorrect algorithm to search for types. The core of this is the
function NC_rec_find_nc_type in libdispatch/dcopy.c. Currently
it searchs the current group and its subtree.
Additionally, the function NC4_inq_typeid in libsrc4/nc4internal.c
has been extended to handle fully qualified names. It was originally
designed to do this, but for some reason never completed.
The NC_rec_find_nc_type algorithm has been altered to match the
algorithm used by NC4_inq_typeid. It operates as follows.
Given a file F, group G and a type T. It searches file F2, group
G2, for another type T2 that is equivalent to T.
The search order is as follows.
1. Search G2 for a type T2 equivalent to T.
2. Search upwards in the ancestor groups of G2 for a type T2 equivalent to T.
3. Search the complete group tree of F2 in pre-order, breadth-first order to locate T2 equivalent to T.
Also add a test case to validate algorithm: ncdump/test_scope.sh.
Note, this change may cause compatibility problems, though it is
unlikely because two different equivalent type declarations in
one dataset is unlikely.
Primary changes:
* Add an improved cache system to speed up performance.
* Fix NCZarr to properly handle scalar variables.
Misc. Related Changes:
* Added unit tests for extendible hash and for the generic cache.
* Add config parameter to set size of the NCZarr cache.
* Add initial performance tests but leave them unused.
* Add CRC64 support.
* Move location of ncdumpchunks utility from /ncgen to /ncdump.
* Refactor auth support.
Misc. Unrelated Changes:
* More cleanup of the S3 support
* Add support for S3 authentication in .rc files: HTTP.S3.ACCESSID and HTTP.S3.SECRETKEY.
* Remove the hashkey from the struct OBJHDR since it is never used.
As it was, nccopy -c dim/x was sometimes being ignored. So
modify nccopy to properly take into account. This also required
a change to the nczarr code because it was not applying default
chunking in the same way as libhdf5.
Modify ncdump/tst_nccopy4.sh to test this feature properly.
Also add a similar test to nczarr_test.
Additionally, fix some other things that were causing Visual
Studio builds with testing to not work.
* fix curl testing under CMake to properly handle case
where DAP is disabled, but byterange support is enabled.
* properly test and/or define uintptr_t
* Convert _O_XXX to O_XXX flags used by open();
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
re: Github issue https://github.com/Unidata/netcdf-c/issues/1713
If nc_def_var_filter or nc_def_var_deflate or nc_def_var_szip is
called multiple times with the same filter id, but possibly with
different sets of parameters, then the first invocation is
sticky and later invocations are ignored. The desired behavior
is to have the last invocation be used.
This PR implements that desired behavior, with some special
cases. If you call nc_def_var_deflate multiple times, then the
last invocation rule applies with respect to deflate. However,
the shuffle filter, if enabled, is always applied just before
applying deflate.
Misc unrelated changes:
1. Make client-side filters be disabled by default
2. Fix the definition of uintptr_t and use in oc2 and libdap4
3. Add some test cases
4. modify filter order tests to use plugin filters rather
than client-side filters
re: https://github.com/Unidata/netcdf-c/issues/1408
1. Add some function tests to configure.ac; these are functions
not defined with -ansi.
2. When using -ansi, fix include/ncconfigure.h to check for
the possibilty that certain functions are being defined
by macros. Apparently Debian does this for some reason.
No idea why.
Unrelated: modify the debug/cf.cmake debug shell script.
re: issue https://github.com/Unidata/netcdf-c/issues/1251
Assume that you have the URL to a remote dataset
which is a normal netcdf-3 or netcdf-4 file.
This PR allows the netcdf-c to read that dataset's
contents as a netcdf file using HTTP byte ranges
if the remote server supports byte-range access.
Originally, this PR was set up to access Amazon S3 objects,
but it can also access other remote datasets such as those
provided by a Thredds server via the HTTPServer access protocol.
It may also work for other kinds of servers.
Note that this is not intended as a true production
capability because, as is known, this kind of access to
can be quite slow. In addition, the byte-range IO drivers
do not currently do any sort of optimization or caching.
An additional goal here is to gain some experience with
the Amazon S3 REST protocol.
This architecture and its use documented in
the file docs/byterange.dox.
There are currently two test cases:
1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle
for a remote netcdf-3 file and a remote netcdf-4 file.
2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote
datasets.
This PR also incorporates significantly changed model inference code
(see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259).
1. It centralizes the code that infers the dispatcher.
2. It adds support for byte-range URLs
Other changes:
1. NC_HDF5_finalize was not being properly called by nc_finalize().
2. Fix minor bug in ncgen3.l
3. fix memory leak in nc4info.c
4. add code to walk the .daprc triples and to replace protocol=
fragment tag with a more general mode= tag.
Final Note:
Th inference code is still way too complicated. We need to move
to the validfile() model used by netcdf Java, where each
dispatcher is asked if it can process the file. This decentralizes
the inference code. This will be done after all the major new
dispatchers (PIO, Zarr, etc) have been implemented.
Primary fixes to get -ansi to work.
1. Convert all '//' C++ style comments to /*...*/ or to use #if 0...#endif
2. It turns out that when -ansi is specified, then a number of
functions no longer are defined in the header -- but they are still
in the .so file.<br>
The big example is strdup(). So, added code to include/ncconfig.h to define
externs for those missing functions that occur in more than one place.
These are enabled if !_WIN32 && __STDC__ == 1 (__STDC__ is supposed to
be the equivalent compile time flag to -ansi). Note that this requires
config.h (which references ncconfig.h) to be included in files where it is
currently not included. Single uses will be only in the file that uses them.
3. Added mmap test for the MAP_ANONYMOUS flag to configure.ac. Apparently
this is not always defined with -ansi.
4. fix some large integer constants in nc_test4/tst_atts3.c and nc_test4/tst_filterparser.c
to avoid compiler complaints.
5. fix a double constant in nc_test4/tst_filterparser.c to avoid compiler complaints.
[Note I suspect #4 and #5 will be a problem on big-endian machines, but we have no way to test]
Misc. Changes:
1. convert more instances of _MSC_VER to _WIN32.
2. added some debugging code to include/nctestserver.h
3. added comment about libdispatch/drc.c always being compiled.
4. modify parser generation in ncgen to remove unneeded files.
strlcat provides better protection against buffer overflows.
Code is taken from the FreeBSD project source code. Specifically:
https://github.com/freebsd/freebsd/blob/master/lib/libc/string/strlcat.c
License appears to be acceptable, but needs to be checked by e.g. Debian.
Step 1:
1. Add to netcdf-c/include/ncconfigure.h to use our version
if not already available as determined by HAVE_STRLCAT in config.h.
2. Add the strlcat code to libdispatch/dstring.c
3. Turns out that strlcat was already defined in several places.
So remove it from:
ncgen3/genlib.c
ncdump/dumplib.c
3. Define strlcat extern definition in ncconfigure.h.
4. Modify following directories to use strlcat:
libdap2 libdap4 ncdap_test dap4_test
Will do others in subsequent steps.
