# Description
Remove various obsolete build options. Also do some code movement.
## Specific Changes
* The remotetest server is sometimes unstable, so provide a mechanism
to force disabling calls to remotetest.unidata.ucar.edu.
This is enabled by adding a repository variable named
REMOTETESTDOWN with the value "yes".
* Fix CMakeLists.txt to use the uname command as an alternate
to using the hostname command (which does not work under cygwin).
* Remove the JNA stuff as obsolete
* Remove the ENABLE_CLIENTSIDE_FILTERS options since it has been
disabled for a while.
* Fix bad option flag in some github action .yml files: change --disable-xml2 to --disable-libxml2
* Collect globalstate definitions into nc4internal.h
* Remove ENABLE_NCZARR_FILTERS_TESTING option as obsolete and replace
with ENABLE_NCZARR_FILTERS
* Move some dispatcher independent functions from libsrc4/nc4internal.c to libdispatch/ddispatch.c
* As a long term goal, and because it is now the case that --enable-nczarr
=> USE_NETCDF4, make the external options --enable-netcdf-4 and
--enable-netcdf4 obsolete in favor of --enable-hdf5
We will do the following for one more release cycle.
1. Make --enable-netcdf-4 be an alias for --enable-netcdf4.
2. Make --enable-netcdf4 an alias for --enable-hdf5.
3. Internally, convert most uses of USE_NETCDF_4 ad USE_NETCDF4 to USE_HDF5
After the next release, --enable-netcdf-4 and --enable-netcdf4 will
be removed.
* main: (48 commits)
Update release notes.
Refactor macro _FillValue to NC_FillValue in support of https://github.com/Unidata/netcdf-c/issues/2858
Remove appveyor config file.
Add CI for a Windows Runner on Github Actions.
Add cmake prefix path to appveyor config.
Attempt to fix zlib-related error in appveyor.
Correct typo.
Remove check for libcurl unless it is necessary for required functionality.
Rename the vendored strlcat symbol
Fix conversion warnings in libdispatch
Set flags to avoid warning messages if curl isn't found.
Use modern cmake nomenclature for curl.
Fix truncated-format warning in ncgen
Fix some conversion warnings in ncgen3
Fix some conversion warnings in ncgen3 generated files
Regenerate ncgen3
CMake: Add option to automatically regenerate ncgen3/ncgen
Skip checking for duplicates if only one element in list
Change format of backwards-loops
Silence some conversion warnings in ncgen generated files
...
Mostly just add an explicit cast when calling `malloc` and its
variants. Sometimes instead change the type of a local variable if
this would silence multiple warnings.
Prior to this PR, DAP4 always fetched the whole (constrained) dataset
This PR changes the query processing so
1. It reads data on a per-variable request (equivalent to calling nc_get_var()).
2. It tracks a response for every query.
Most of the changes reflect having to do per-variable requests.
In any case, doing all this significantly reduces the amount of data transmitted and hence speeds up DAP4 requests.
re: Issue https://github.com/Unidata/netcdf-c/issues/2752
The authorization setup when using a proxy is apparently not
being used, or used incorrectly.
This PR ensures that the relevant curl options, specifically
CURLOPT_VERIFYHOST and CURLOPT_VERIFYPEER, are properly setup.
As part of this, the ability to turn off these options was fixed.
Note that no testing of this PR is currently possible because we
do not have access to a proxy.
This PR started as an attempt to add unlimited dimensions to NCZarr.
It did that, but this exposed significant problems with test interference.
So this PR is mostly about fixing -- well mitigating anyway -- test
interference.
The problem of test interference is now documented in the document docs/internal.md.
The solutions implemented here are also describe in that document.
The solution is somewhat fragile but multiple cleanup mechanisms
are provided. Note that this feature requires that the
AWS command line utility must be installed.
## Unlimited Dimensions.
The existing NCZarr extensions to Zarr are modified to support unlimited dimensions.
NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group".
Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms
Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2.
* Form 1: An integer representing the size of the dimension, which is used for simple named dimensions.
* Form 2: A dictionary with the following keys and values"
- "size" with an integer value representing the (current) size of the dimension.
- "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension.
For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases.
That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension.
This is the standard semantics for unlimited dimensions.
Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following.
* Did a partial refactor of the slice handling code in zwalk.c to clean it up.
* Added a number of tests for unlimited dimensions derived from the same test in nc_test4.
* Added several NCZarr specific unlimited tests; more are needed.
* Add test of endianness.
## Misc. Other Changes
* Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the
AWS Transfer Utility mechanism. This is controlled by the
```#define TRANSFER```` command in that file. It defaults to being disabled.
* Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE).
* Fixed an obscure memory leak in ncdump.
* Removed some obsolete unit testing code and test cases.
* Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c.
* Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4.
* Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects.
* Modify the semantics of zodom to properly handle stride > 1.
* Add a truncate operation to the libnczarr zmap code.
re: PR https://github.com/Unidata/netcdf-c/pull/2655
This PR modifies the transient types PR so that all created
transient types are given a created unique name (within a
group). The form of the name is "_Anonymous<Class>NN". The class
is the user-defined type class: Enum, Compound, Opaque, or
Vlen. NN is an integer identifier to ensure uniqueness.
Additionally, this was applied to DAP/4 anonymous dimensions.
This also required some test baseline data changes.
The transient test case is modified to verify that the name exists.
re: Issue https://github.com/Unidata/netcdf-c/issues/2685
re: PR https://github.com/Unidata/netcdf-c/pull/2179
As noted in PR https://github.com/Unidata/netcdf-c/pull/2179,
the old code did not allow for reclaiming instances of types,
nor for properly copying them. That PR provided new functions
capable of reclaiming/copying instances of arbitrary types.
However, as noted by Issue https://github.com/Unidata/netcdf-c/issues/2685, using these
most general functions resulted in a significant performance
degradation, even for common cases.
This PR attempts to mitigate the cost of using the general
reclaim/copy functions in two ways.
First, the previous functions operating at the top level by
using ncid and typeid arguments. These functions were augmented
with equivalent versions that used the netcdf-c library internal
data structures to allow direct access to needed information.
These new functions are used internally to the library.
The second mitigation involves optimizing the internal functions
by providing early tests for common cases. This avoids
unnecessary recursive function calls.
The overall result is a significant improvement in speed by a
factor of roughly twenty -- your mileage may vary. These
optimized functions are still not as fast as the original (more
limited) functions, but they are getting close. Additional optimizations are
possible. But the cost is a significant "uglification" of the
code that I deemed a step too far, at least for now.
## Misc. Changes
1. Added a test case to check the proper reclamation/copy of complex types.
2. Found and fixed some places where nc_reclaim/copy should have been used.
3. Replaced, in the netcdf-c library, (almost all) occurrences of nc_reclaim_copy with calls to NC_reclaim/copy. This plus the optimizations is the primary speed-up mechanism.
4. In DAP4, the metadata is held in a substrate in-memory file; this required some changes so that the reclaim/copy code accessed that substrate dispatcher rather than the DAP4 dispatcher.
5. Re-factored and isolated the code that computes if a type is (transitively) variable-sized or not.
6. Clean up the reclamation code in ncgen; adding the use of nc_reclaim exposed some memory problems.
re: PR https://github.com/Unidata/netcdf-c/issues/2622
H/T Nathan Potter for finding this.
Apparently the existing library DAP code for supporting
compressed http responses was disabled.
So:
1. enable CURLOPT_ACCEPT_ENCODING by default
2. Add a new HTTP.ENCODE for .dodsrc to allow it to be disabled.
This change-set modifies PR https://github.com/Unidata/netcdf-c/pull/2555
to add the changes listed below. Most of these changes are required
by changes to the Java remotetest.unidata.ucar.edu server.
## DAP4 Related Changes
* Add tests *dap4_test/test_constraints.sh* and *dap4_test/test_hyrax.sh*.
* Provide explicit list of remotetest files to test.
* Cleanup local checksum computing and verification.
* Define a temporary Hyrax hack flag to deal with the way Hyrax handles checksums and add "#hyrax" fragment flag for it.
* Add a hack to get past an LGTM problem with using "http:".
* Improve debug support.
## Other Changes
* Cleanup the recipe in *docs/nczarr.md* for building *aws-sdk-cpp* library.
Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555.
This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts*
to test several features:
1. Show that access over the Internet to servers using the DAP4 protocol works.
2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly.
4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable.
The test inputs (primarily *\*.nc* files) provided in the netcdf-c library
are also used by the DAP4 Test Server (aka d4ts) to present web access to a
collection of data files accessible via the DAP4 protocol and which can be
used for testing Internet access to a working server.
To be precise, this version of d4ts is currently in unmerged branches
of the *netcdf-java* and *tds* Github repositories and so are not actually
in the main repositories *yet*. However, the *d4ts.war* file was created
from that branch and used to populate the *remotetest.unidata.ucar.edu*
server
The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org)
and *thredds-test*. These will continue to remain disabled until
those servers can be fixed.
## Primary Changes
* Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers.
* Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process.
* Fix the *dap4_test/test_remote.sh* test script to match the current available test data.
* Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4].
## Misc. Unrelated Changes
* Remove a raft of warnings, especially in nc_test4/tst_quantize.c.
* Add some additional explanatory information to the NCZarr documentation.
* Cleanup some Doxygen errors in the docs file and reorder some files.
NOTE: This PR should not be included in 4.9.1 since additional
DAP4 related PRs will be forthcoming.
This PR makes major changes to libdap4 and dap4_test driven by changes to TDS.
* Enable DAP4
* Clean up the test input files and the test baseline comparison files. This entails:
* Remove a multitude of unused test input and baseline data files; among them are dap4_test/: daptestfiles, dmrtestfiles, nctestfiles, and misctestfiles.
* Define a canonical set of test input files and record in dap4_test/cdltestfiles.
* Use the cdltestfiles to generate the .nc test inputs. This set of .nc files is then moved to the d4ts (DAP4 test server) war file in the tds repository. This set then becomes the canonical set of DAP4 test sources.
* Scrape d4ts to obtain copies of the raw streams of DAP4 encoded data. The .dmr and .dap streams are then stored in dap4_test/rawtestfiles.
* Disable some remote server tests until those servers are fixed.
* Add an option to ncdump (-XF) that forces the type of the _FillValue attribute; this is primarily to simplify testing of fill mismatch.
* Minor bug fixes to ncgen.
* Changes to libdap4:
* Replace old checksum hack with the dap4.checksum flag.
* Support the dap4.XXX controls.
* Cleanup _FillValue handling, especially var-attribute type mismatches.
* Fix enum handling based on changes to netcdf-java.
* Changes to dap4_test:
* Add getopt support to various test support programs.
* Remove unneeded shell scripts.
* Add new scripts: test_curlopt.sh
* re: https://github.com/Unidata/netcdf-c/pull/2278
* re: https://github.com/Unidata/netcdf-c/issues/2485
* re: https://github.com/Unidata/netcdf-c/issues/2474
This PR subsumes PR https://github.com/Unidata/netcdf-c/pull/2278.
Actually is a bit an omnibus covering several issues.
## PR https://github.com/Unidata/netcdf-c/pull/2278
Add support for the Zarr string type.
Zarr strings are restricted currently to be of fixed size.
The primary issue to be addressed is to provide a way for user to
specify the size of the fixed length strings. This is handled by providing
the following new attributes special:
1. **_nczarr_default_maxstrlen** —
This is an attribute of the root group. It specifies the default
maximum string length for string types. If not specified, then
it has the value of 64 characters.
2. **_nczarr_maxstrlen** —
This is a per-variable attribute. It specifies the maximum
string length for the string type associated with the variable.
If not specified, then it is assigned the value of
**_nczarr_default_maxstrlen**.
This PR also requires some hacking to handle the existing netcdf-c NC_CHAR
type, which does not exist in zarr. The goal was to choose numpy types for
both the netcdf-c NC_STRING type and the netcdf-c NC_CHAR type such that
if a pure zarr implementation read them, it would still work and an
NC_CHAR type would be handled by zarr as a string of length 1.
For writing variables and NCZarr attributes, the type mapping is as follows:
* "|S1" for NC_CHAR.
* ">S1" for NC_STRING && MAXSTRLEN==1
* ">Sn" for NC_STRING && MAXSTRLEN==n
Note that it is a bit of a hack to use endianness, but it should be ok since for
string/char, the endianness has no meaning.
For reading attributes with pure zarr (i.e. with no nczarr
atribute types defined), they will always be interpreted as of
type NC_CHAR.
## Issue: https://github.com/Unidata/netcdf-c/issues/2474
This PR partly fixes this issue because it provided more
comprehensive support for Zarr attributes that are JSON valued expressions.
This PR still does not address the problem in that issue where the
_ARRAY_DIMENSION attribute is incorrectly set. Than can only be
fixed by the creator of the datasets.
## Issue: https://github.com/Unidata/netcdf-c/issues/2485
This PR also fixes the scalar failure shown in this issue.
It generally cleans up scalar handling.
It also adds a note to the documentation describing that
NCZarr supports scalars while Zarr does not and also how
scalar interoperability is achieved.
## Misc. Other Changes
1. Convert the nczarr special attributes and keys to be all lower case. So "_NCZARR_ATTR" now used "_nczarr_attr. Support back compatibility for the upper case names.
2. Cleanup my too-clever-by-half handling of scalars in libnczarr.
