mirror of
https://github.com/Unidata/netcdf-c.git
synced 2024-11-27 07:30:33 +08:00
e768bf2cbc
16 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Kyle Shores
|
8fd6dcb979 | Replace ENABLE_S3 with NETCDF_ENABLE_S3 | ||
|
Kyle Shores
|
d1334f7b88 | Replace ENABLE_NCZARR with NETCDF_ENABLE_NCZARR | ||
Dennis Heimbigner
|
fb40a72b45 |
Improve performance of the nc_reclaim_data and nc_copy_data functions.
re: Issue https://github.com/Unidata/netcdf-c/issues/2685 re: PR https://github.com/Unidata/netcdf-c/pull/2179 As noted in PR https://github.com/Unidata/netcdf-c/pull/2179, the old code did not allow for reclaiming instances of types, nor for properly copying them. That PR provided new functions capable of reclaiming/copying instances of arbitrary types. However, as noted by Issue https://github.com/Unidata/netcdf-c/issues/2685, using these most general functions resulted in a significant performance degradation, even for common cases. This PR attempts to mitigate the cost of using the general reclaim/copy functions in two ways. First, the previous functions operating at the top level by using ncid and typeid arguments. These functions were augmented with equivalent versions that used the netcdf-c library internal data structures to allow direct access to needed information. These new functions are used internally to the library. The second mitigation involves optimizing the internal functions by providing early tests for common cases. This avoids unnecessary recursive function calls. The overall result is a significant improvement in speed by a factor of roughly twenty -- your mileage may vary. These optimized functions are still not as fast as the original (more limited) functions, but they are getting close. Additional optimizations are possible. But the cost is a significant "uglification" of the code that I deemed a step too far, at least for now. ## Misc. Changes 1. Added a test case to check the proper reclamation/copy of complex types. 2. Found and fixed some places where nc_reclaim/copy should have been used. 3. Replaced, in the netcdf-c library, (almost all) occurrences of nc_reclaim_copy with calls to NC_reclaim/copy. This plus the optimizations is the primary speed-up mechanism. 4. In DAP4, the metadata is held in a substrate in-memory file; this required some changes so that the reclaim/copy code accessed that substrate dispatcher rather than the DAP4 dispatcher. 5. Re-factored and isolated the code that computes if a type is (transitively) variable-sized or not. 6. Clean up the reclamation code in ncgen; adding the use of nc_reclaim exposed some memory problems. |
||
|
Dennis Heimbigner
|
49737888ca |
Improve S3 Documentation and Support
## Improvements to S3 Documentation * Create a new document *quickstart_paths.md* that give a summary of the legal path formats used by netcdf-c. This includes both file paths and URL paths. * Modify *nczarr.md* to remove most of the S3 related text. * Move the S3 text from *nczarr.md* to a new document *cloud.md*. * Add some S3-related text to the *byterange.md* document. Hopefully, this will make it easier for users to find the information they want. ## Rebuild NCZarr Testing In order to avoid problems with running make check in parallel, two changes were made: 1. The *nczarr_test* test system was rebuilt. Now, for each test. any generated files are kept in a test-specific directory, isolated from all other test executions. 2. Similarly, since the S3 test bucket is shared, any generated S3 objects are isolated using a test-specific key path. ## Other S3 Related Changes * Add code to ensure that files created on S3 are reclaimed at end of testing. * Used the bash "trap" command to ensure S3 cleanup even if the test fails. * Cleanup the S3 related configure.ac flag set since S3 is used in several places. So now one should use the option *--enable-s3* instead of *--enable-nczarr-s3*, although the latter is still kept as a deprecated alias for the former. * Get some of the github actions yml to work with S3; required fixing various test scripts adding a secret to access the Unidata S3 bucket. * Cleanup S3 portion of libnetcdf.settings.in and netcdf_meta.h.in and test_common.in. * Merge partial S3 support into dhttp.c. * Create an experimental s3 access library especially for use with Windows. It is enabled by using the options *--enable-s3-internal* (automake) or *-DENABLE_S3_INTERNAL=ON* (CMake). Also add a unit-test for it. * Move some definitions from ncrc.h to ncs3sdk.h ## Other Changes * Provide a default implementation of strlcpy and move this and similar defaults into *dmissing.c*. |
||
|
Dennis Heimbigner
|
7b09290a3a |
Improve filter installation process to avoid use of an extra shell script
re: https://github.com/Unidata/netcdf-c/issues/2338 re: https://github.com/Unidata/netcdf-c/issues/2294 In issue https://github.com/Unidata/netcdf-c/issues/2338, Ed Hartnett suggested a better way to install filters to a user defined location -- for Automake, anyway. This PR implements that suggestion. It turns out to be more complicated than it appears, so there are fair number of changes; mostly to shell scripts. Most of the change is in plugins/Makefile.am. NOTE: this PR still does NOT address the use of HDF5_PLUGIN_PATH as the default; this turns out to be complex when dealing with NCZarr. So this will be addressed in a subsequent post 4.9.0 PR. ## Misc. Changes 1. Record the occurrences of incomplete codecs in libnczarr so that they can be included in _Codecs attribute correctly. This allows users to see what missing filters are referenced in the Zarr file. Primarily affects libnczarr/zfilter.[ch]. Also required creating a new no-effect filter: H5Zunknown.c. 2. Move the unknown filter test to a separate test file. 3. Incorporates PR https://github.com/Unidata/netcdf-c/pull/2343 |
||
|
Dennis Heimbigner
|
f3e711e2b8 |
Add support for setting HDF5 alignment property when creating a file
re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected. |
||
|
Dennis Heimbigner
|
446348ed18 |
Add complete bitgroom support to NCZarr
re: PR https://github.com/Unidata/netcdf-c/pull/2088 re: PR https://github.com/Unidata/netcdf-c/pull/2130 replaces: https://github.com/Unidata/netcdf-c/pull/2140 Changes: * Add NCZarr-specific quantize functions to the dispatch table. * Copy (modified) quantize code from libhdf5 to NCZarr * Add quantize invocation to zvar.c * Add support for _QuantizeBitgroomNumberOfSignificantDigits and _QuantizeGranularBitgroomNumberOfSignificantDigits to ncgen. * Modify nc_test4/tst_quantize.c to allow it to be used both for hdf5 and for nczarr. * Make dap4 properly handle quantize functions in dispatch table. * Add quantize attribute support to ncgen. Other changes: * Caught and fixed some S3 problems * Fixed some nczarr fillvalue problems. * Fixed some nczarr cache problems. * Cleanup some flaws in libdispatch/dinfermodel.c * Allow byterange requests to S3 be readable by dinfermodel.c/check_file_type * Remove the libnczarr ztracedispatch code (big change). |
||
|
Dennis Heimbigner
|
11547ffd29 |
1. Fix an additional flaw in fill_value handling where non-atomic default values were not properly being handled.
2. Rename the NC4_inq_any_type to NC_inq_any_type |
||
|
Dennis Heimbigner
|
8b9253fef2 |
Fix various problem around VLEN's
re: https://github.com/Unidata/netcdf-c/issues/541 re: https://github.com/Unidata/netcdf-c/issues/1208 re: https://github.com/Unidata/netcdf-c/issues/2078 re: https://github.com/Unidata/netcdf-c/issues/2041 re: https://github.com/Unidata/netcdf-c/issues/2143 For a long time, there have been known problems with the management of complex types containing VLENs. This also involves the string type because it is stored as a VLEN of chars. This PR (mostly) fixes this problem. But note that it adds new functions to netcdf.h (see below) and this may require bumping the .so number. These new functions can be removed, if desired, in favor of functions in netcdf_aux.h, but netcdf.h seems the better place for them because they are intended as alternatives to the nc_free_vlen and nc_free_string functions already in netcdf.h. The term complex type refers to any type that directly or transitively references a VLEN type. So an array of VLENS, a compound with a VLEN field, and so on. In order to properly handle instances of these complex types, it is necessary to have function that can recursively walk instances of such types to perform various actions on them. The term "deep" is also used to mean recursive. At the moment, the two operations needed by the netcdf library are: * free'ing an instance of the complex type * copying an instance of the complex type. The current library does only shallow free and shallow copy of complex types. This means that only the top level is properly free'd or copied, but deep internal blocks in the instance are not touched. Note that the term "vector" will be used to mean a contiguous (in memory) sequence of instances of some type. Given an array with, say, dimensions 2 X 3 X 4, this will be stored in memory as a vector of length 2*3*4=24 instances. The use cases are primarily these. ## nc_get_vars Suppose one is reading a vector of instances using nc_get_vars (or nc_get_vara or nc_get_var, etc.). These functions will return the vector in the top-level memory provided. All interior blocks (form nested VLEN or strings) will have been dynamically allocated. After using this vector of instances, it is necessary to free (aka reclaim) the dynamically allocated memory, otherwise a memory leak occurs. So, the recursive reclaim function is used to walk the returned instance vector and do a deep reclaim of the data. Currently functions are defined in netcdf.h that are supposed to handle this: nc_free_vlen(), nc_free_vlens(), and nc_free_string(). Unfortunately, these functions only do a shallow free, so deeply nested instances are not properly handled by them. Note that internally, the provided data is immediately written so there is no need to copy it. But the caller may need to reclaim the data it passed into the function. ## nc_put_att Suppose one is writing a vector of instances as the data of an attribute using, say, nc_put_att. Internally, the incoming attribute data must be copied and stored so that changes/reclamation of the input data will not affect the attribute. Again, the code inside the netcdf library does only shallow copying rather than deep copy. As a result, one sees effects such as described in Github Issue https://github.com/Unidata/netcdf-c/issues/2143. Also, after defining the attribute, it may be necessary for the user to free the data that was provided as input to nc_put_att(). ## nc_get_att Suppose one is reading a vector of instances as the data of an attribute using, say, nc_get_att. Internally, the existing attribute data must be copied and returned to the caller, and the caller is responsible for reclaiming the returned data. Again, the code inside the netcdf library does only shallow copying rather than deep copy. So this can lead to memory leaks and errors because the deep data is shared between the library and the user. # Solution The solution is to build properly recursive reclaim and copy functions and use those as needed. These recursive functions are defined in libdispatch/dinstance.c and their signatures are defined in include/netcdf.h. For back compatibility, corresponding "ncaux_XXX" functions are defined in include/netcdf_aux.h. ```` int nc_reclaim_data(int ncid, nc_type xtypeid, void* memory, size_t count); int nc_reclaim_data_all(int ncid, nc_type xtypeid, void* memory, size_t count); int nc_copy_data(int ncid, nc_type xtypeid, const void* memory, size_t count, void* copy); int nc_copy_data_all(int ncid, nc_type xtypeid, const void* memory, size_t count, void** copyp); ```` There are two variants. The first two, nc_reclaim_data() and nc_copy_data(), assume the top-level vector is managed by the caller. For reclaim, this is so the user can use, for example, a statically allocated vector. For copy, it assumes the user provides the space into which the copy is stored. The second two, nc_reclaim_data_all() and nc_copy_data_all(), allows the functions to manage the top-level. So for nc_reclaim_data_all, the top level is assumed to be dynamically allocated and will be free'd by nc_reclaim_data_all(). The nc_copy_data_all() function will allocate the top level and return a pointer to it to the user. The user can later pass that pointer to nc_reclaim_data_all() to reclaim the instance(s). # Internal Changes The netcdf-c library internals are changed to use the proper reclaim and copy functions. It turns out that the places where these functions are needed is quite pervasive in the netcdf-c library code. Using these functions also allows some simplification of the code since the stdata and vldata fields of NC_ATT_INFO are no longer needed. Currently this is commented out using the SEPDATA \#define macro. When any bugs are largely fixed, all this code will be removed. # Known Bugs 1. There is still one known failure that has not been solved. All the failures revolve around some variant of this .cdl file. The proximate cause of failure is the use of a VLEN FillValue. ```` netcdf x { types: float(*) row_of_floats ; dimensions: m = 5 ; variables: row_of_floats ragged_array(m) ; row_of_floats ragged_array:_FillValue = {-999} ; data: ragged_array = {10, 11, 12, 13, 14}, {20, 21, 22, 23}, {30, 31, 32}, {40, 41}, _ ; } ```` When a solution is found, I will either add it to this PR or post a new PR. # Related Changes * Mark nc_free_vlen(s) as deprecated in favor of ncaux_reclaim_data. * Remove the --enable-unfixed-memory-leaks option. * Remove the NC_VLENS_NOTEST code that suppresses some vlen tests. * Document this change in docs/internal.md * Disable the tst_vlen_data test in ncdump/tst_nccopy4.sh. * Mark types as fixed size or not (transitively) to optimize the reclaim and copy functions. # Misc. Changes * Make Doxygen process libdispatch/daux.c * Make sure the NC_ATT_INFO_T.container field is set. |
||
|
Dennis Heimbigner
|
9380790ea8 |
Support MSYS2/Mingw platform
re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments. |
||
|
Dennis Heimbigner
|
6b69b9c52c |
Significantly Improve Amazon S3 Cloud Storage Support
## S3 Related Fixes * Add comprehensive support for specifying AWS profiles to provide access credentials. * Parse the files "~/.aws/config" and "~/.aws/credentials to provide credentials for the HDF5 ROS3 driver and to locate default region. * Add a function to obtain the currently active S3 credentials. The search rules are defined in docs/nczarr.md. * Provide documentation for the new features. * Modify the struct NCauth (in include/ncauth.h) to replace specific S3 credentials with a profile name. * Add a unit test to test the operation of profile and credentials management. * Add support for URLS of the form "s3://<bucket>/<key>"; this requires obtaining a default region. * Allows the specification of profile and/or region in a URL of the form "#mode=nczarr,...&aws.region=...&aws.profile=..." ## Misc. Fixes * Move the ezxml code to libdispatch so that it can be used both by DAP4 and nczarr. * Modify nclist to provide a deep clone operation. * Modify ncuri to provide a deep clone operation. * Modify the .rc file format to allow the specification of a path to be tested when looking for an entry in the .rc file. * Ensure that the NC_rcload function is called. * Modify nchttp to support setting request headers. |
||
|
Dennis Heimbigner
|
11fe00ea05 |
Add filter support to NCZarr
Filter support has three goals: 1. Use the existing HDF5 filter implementations, 2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr, 3. Allow filters to be used even when HDF5 is disabled Detailed usage directions are define in docs/filters.md. For now, the existing filter API is left in place. So filters are defined using ''nc_def_var_filter'' using the HDF5 style where the id and parameters are unsigned integers. This is a big change since filters affect many parts of the code. In the following, the terms "compressor" and "filter" and "codec" are generally used synonomously. ### Filter-Related Changes: * In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms. * Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h. * Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out. * Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h. * Add a number of new test to test the new nczarr filters. * Let ncgen parse _Codecs attribute, although it is ignored. ### Plugin directory changes: * Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file * Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip * Add a Codec defaulter (see docs/filters.md) for the big four filters. * Make plugins work with windows by properly adding __declspec declaration. ### Misc. Non-Filter Changes * Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5. * Improve support for caching * More fixes for path conversion code * Fix misc. memory leaks * Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath. * Add a number of new test to test the non-filter fixes. * Update the parsers * Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32' |
||
Greg Sjaardema
|
cbcee382b0 | Remove need for HDF5-1.6 API being defined | ||
|
Dennis Heimbigner
|
74b40fd788 |
Upgrade the nczarr code to match Zarr V2
Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu |
||
|
Dennis Heimbigner
|
aeb3ac2809 |
Mostly revert the filter code to reduce its complexity of use.
re: https://github.com/Unidata/netcdf-c/issues/1836 Revert the internal filter code to simplify it. From the user's point of view, the only visible changes should be: 1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h 2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter. Internally,the dispatch table has been modified to get rid of the filter_actions entry and associated complex structures. It has been replaced with inq_var_filter_ids and inq_var_filter_info entries and the dispatch table version has been bumped to 3. Corresponding NOOP and NOTNC4 functions were added to libdispatch/dnotnc4.c. Also, the filter_action entries in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2, etc). This should only impact UDF users. In the process, it became clear that the form of the filters field in NC_VAR_INFO_T was format dependent, so I converted it to be of type void* and pushed its management into the various dispatch code bases. Specifically libhdf5 and libnczarr now manage the filters field in their own way. The auxilliary functions for parsing textual filter specifications were moved to netcdf_aux.h and were renamed to the following: * ncaux_h5filterspec_parse * ncaux_h5filterspec_parselist * ncaux_h5filterspec_free * ncaux_h5filter_fix8 Misc. Other Changes: 1. Document NUG/filters.md updated to reflect the changes above. 2. All the old data types (structs and enums) used by filter_actions actions were deleted. The exception is the NC_H5_Filterspec because it is needed by ncaux_h5filterspec_parselist. 3. Clientside filters were removed -- another enhancement for which no-one ever asked. 4. The ability to remove filters was itself removed. 5. Some functionality needed by nczarr was moved from libhdf5 to libsrc4 e.g. nc4_find_default_chunksizes 6. All the filterx code was removed 7. ncfilter.h and nc4filter.c no longer used Misc. Unrelated Changes: 1. The nczarr_test makefile clean was leaving some directories; so add clean-local to take care of them. |
||
|
Dennis Heimbigner
|
59e04ae071 |
This PR adds EXPERIMENTAL support for accessing data in the
cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific. |