re: Issue https://github.com/Unidata/netcdf-c/issues/2190
The primary purpose of this PR is to improve the utf8 support
for windows. This is persuant to a change in Windows that
supports utf8 natively (almost). The almost means that it is
still utf16 internally and the set of characters representable
by utf8 is larger than those representable by utf16.
This leaves open the question in the Issue about handling
the Windows 1252 character set.
This required the following changes:
1. Test the Windows build and major version in order to see if
native utf8 is supported.
2. If native utf8 is supported, Modify dpathmgr.c to call the 8-bit
version of the windows fopen() and open() functions.
3. In support of this, programs that use XGetOpt (Windows versions)
need to get the command line as utf8 and then parse to
arc+argv as utf8. This requires using a homegrown command line parser
named XCommandLineToArgvA.
4. Add a utility program called "acpget" that prints out the
current Windows code page and locale.
Additionally, some technical debt was cleaned up as follows:
1. Unify all the places which attempt to read all or a part
of a file into the dutil.c#NC_readfile code.
2. Similary unify all the code that creates temp files into
dutil.c#NC_mktmp code.
3. Convert almost all remaining calls to fopen() and open()
to NCfopen() and NCopen3(). This is to ensure that path management
is used consistently. This touches a number of files.
4. extern->EXTERNL as needed to get it to work under Windows.
re: PR https://github.com/Unidata/netcdf-c/pull/2088
re: PR https://github.com/Unidata/netcdf-c/pull/2130
replaces: https://github.com/Unidata/netcdf-c/pull/2140
Changes:
* Add NCZarr-specific quantize functions to the dispatch table.
* Copy (modified) quantize code from libhdf5 to NCZarr
* Add quantize invocation to zvar.c
* Add support for _QuantizeBitgroomNumberOfSignificantDigits
and _QuantizeGranularBitgroomNumberOfSignificantDigits to ncgen.
* Modify nc_test4/tst_quantize.c to allow it to be used both for hdf5
and for nczarr.
* Make dap4 properly handle quantize functions in dispatch table.
* Add quantize attribute support to ncgen.
Other changes:
* Caught and fixed some S3 problems
* Fixed some nczarr fillvalue problems.
* Fixed some nczarr cache problems.
* Cleanup some flaws in libdispatch/dinfermodel.c
* Allow byterange requests to S3 be readable by dinfermodel.c/check_file_type
* Remove the libnczarr ztracedispatch code (big change).
In a number of places in the netcdf-c library, some of the
high order mode flags (the mode argument to nc_open or nc_close)
are being used to save state information. This means that the
description of the defined and open mode flags in netcdf.h
were not accurate.
This PR moves all those hack flags so that the list of mode flags
in netcdf.h is correct.
re: https://github.com/Unidata/netcdf-c/issues/2117
re: https://github.com/Unidata/netcdf-c/issues/2119
* Modify libsrc to allow byte-range reading of netcdf-3 files in private S3 buckets; this required using the aws sdk. Also add a test case.
* The aws sdk can sometimes cause problems if the Awd::ShutdownAPI function is not called. So at optional atexit() support to ensure it is called. This is disabled for Windows.
* Add documentation to nczarr.md on how to build and use the aws sdk under windows. Currently it builds, but testing fails.
* Switch testing from stratus to the Unidata bucket on S3.
* Improve support for the s3: url protocol.
* Add a s3 specific utility code file: ds3util.c
* Modify NC_infermodel to attempt to read the magic number of byte-ranged files in S3.
## Misc.
* Move and rename the core S3 SDK wrapper code (libnczarr/zs3sdk.cpp) to libdispatch since it now used in libsrc as well as libnczarr.
* Add calls to nc_finalize in the utilities in case atexit is disabled.
* Add header only json parser to the distribution rather than as a built source.
re: issue https://github.com/Unidata/netcdf-c/issues/1251
Assume that you have the URL to a remote dataset
which is a normal netcdf-3 or netcdf-4 file.
This PR allows the netcdf-c to read that dataset's
contents as a netcdf file using HTTP byte ranges
if the remote server supports byte-range access.
Originally, this PR was set up to access Amazon S3 objects,
but it can also access other remote datasets such as those
provided by a Thredds server via the HTTPServer access protocol.
It may also work for other kinds of servers.
Note that this is not intended as a true production
capability because, as is known, this kind of access to
can be quite slow. In addition, the byte-range IO drivers
do not currently do any sort of optimization or caching.
An additional goal here is to gain some experience with
the Amazon S3 REST protocol.
This architecture and its use documented in
the file docs/byterange.dox.
There are currently two test cases:
1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle
for a remote netcdf-3 file and a remote netcdf-4 file.
2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote
datasets.
This PR also incorporates significantly changed model inference code
(see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259).
1. It centralizes the code that infers the dispatcher.
2. It adds support for byte-range URLs
Other changes:
1. NC_HDF5_finalize was not being properly called by nc_finalize().
2. Fix minor bug in ncgen3.l
3. fix memory leak in nc4info.c
4. add code to walk the .daprc triples and to replace protocol=
fragment tag with a more general mode= tag.
Final Note:
Th inference code is still way too complicated. We need to move
to the validfile() model used by netcdf Java, where each
dispatcher is asked if it can process the file. This decentralizes
the inference code. This will be done after all the major new
dispatchers (PIO, Zarr, etc) have been implemented.
re: https://github.com/Unidata/netcdf-c/issues/1154
Inadvertently, the behavior of NC_DISKLESS with nc_create() was
changed in release 4.6.1. Previously, the NC_WRITE flag needed
to be explicitly used with NC_DISKLESS in order to cause the
created file to be persisted to disk.
Additional analyis indicated that the current NC_DISKLESS
implementation was seriously flawed.
This PR attempts to clean up and regularize the situation with
respect to NC_DISKLESS control. One important aspect of diskless
operation is that there are two different notions of write.
1. The file is read-write vs read-only when using the netcdf API.
2. The file is persisted or not to disk at nc_close().
Previously, these two were conflated. The rules now are
as follows.
1. NC_DISKLESS + NC_WRITE means that the file is read/write using the netcdf API
2. NC_DISKLESS + NC_PERSIST means that the file is persisted to a disk file at nc_close.
3. NC_DISKLESS + NC_PERSIST + NC_WRITE means both 1 and 2.
The NC_PERSIST flag is new and takes over the obsolete NC_MPIPOSIX flag.
NC_MPIPOSIX is still defined, but is now an alias for the NC_MPIIO flag.
It is also now the case that for netcdf-4, NC_DISKLESS is independent
of NC_INMEMORY and in fact it is an error to specify both flags
simultaneously.
Finally, the MMAP code was fixed to use NC_PERSIST as well.
Also marked MMAP as deprecated.
Also added a test case to test various combinations of NC_DISKLESS,
NC_PERSIST, and NC_WRITE.
This PR affects a number of files and especially test cases
that used NC_DISKLESS.
Misc. Unrelated fixes
1. fixed some warnings in ncdump/dumplib.c
Fix https://github.com/Unidata/netcdf-c/issues/962
1. remove the --disable-diskless option since it is no
longer needed. Similarly for CMakeLists.txt.
2. Fixed nc4files.c where BAIL and return were mixed
leading to situation where cleanup code was not
being invoked. This probably occurs elsewhere,
but I did not find any specifically.
and https://github.com/Unidata/netcdf-c/issues/708
Expand the NC_INMEMORY capabilities to support writing and accessing
the final modified memory.
Three new functions have been added:
nc_open_memio, nc_create_mem, and nc_close_memio.
The following new capabilities were added.
1. nc_open_memio() allows the NC_WRITE mode flag
so a chunk of memory can be passed in and be modified
2. nc_create_mem() allows the NC_INMEMORY flag to be set
to cause the created file to be kept in memory.
3. nc_close_mem() allows the final in-memory contents to be
retrieved at the time the file is closed.
4. A special flag, NC_MEMIO_LOCK, is provided to ensure that
the provided memory will not be freed or reallocated.
Note the following.
1. If nc_open_memio() is called with NC_WRITE, and NC_MEMIO_LOCK is not set,
then the netcdf-c library will take control of the incoming memory.
This means that the original memory block should not be freed
but the block returned by nc_close_mem() must be freed.
2. If nc_open_memio() is called with NC_WRITE, and NC_MEMIO_LOCK is set,
then modifications to the original memory may fail if the space available
is insufficient.
Documentation is provided in the file docs/inmemory.md.
A test case is provided: nc_test/tst_inmemory.c driven by
nc_test/run_inmemory.sh
WARNING: changes were made to the dispatch table for
the close entry. From int (*close)(int) to int (*close)(int,void*).
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
The in-memory files can be made persistent if nc_create is called with
NC_DISKLESS|NC_WRITE flags set. Initial test case also included.
- Modified ncio mechanism to support
multiple ncio packages; this is so we
can have posixio and memio operating
at the same time.
- cleanup up a bunch of lint issues (unused variables, etc).
