## Include <getopt.h> in various utilities
re: https://github.com/Unidata/netcdf-c/issues/2303
As noted, some utilities are using getopt() without including
getopt.h, so add as needed.
## Turn off run_diskless2.sh when ENABLE_PARALLEL is true
re: https://github.com/Unidata/netcdf-c/issues/2315
Ed notes that this test hangs when running parallel. The test
is attempting to create a very large in-memory file, which is
the proximate cause. But no idea what's the underlying cause.
re: Issue https://github.com/Unidata/netcdf-c/issues/2190
The primary purpose of this PR is to improve the utf8 support
for windows. This is persuant to a change in Windows that
supports utf8 natively (almost). The almost means that it is
still utf16 internally and the set of characters representable
by utf8 is larger than those representable by utf16.
This leaves open the question in the Issue about handling
the Windows 1252 character set.
This required the following changes:
1. Test the Windows build and major version in order to see if
native utf8 is supported.
2. If native utf8 is supported, Modify dpathmgr.c to call the 8-bit
version of the windows fopen() and open() functions.
3. In support of this, programs that use XGetOpt (Windows versions)
need to get the command line as utf8 and then parse to
arc+argv as utf8. This requires using a homegrown command line parser
named XCommandLineToArgvA.
4. Add a utility program called "acpget" that prints out the
current Windows code page and locale.
Additionally, some technical debt was cleaned up as follows:
1. Unify all the places which attempt to read all or a part
of a file into the dutil.c#NC_readfile code.
2. Similary unify all the code that creates temp files into
dutil.c#NC_mktmp code.
3. Convert almost all remaining calls to fopen() and open()
to NCfopen() and NCopen3(). This is to ensure that path management
is used consistently. This touches a number of files.
4. extern->EXTERNL as needed to get it to work under Windows.
re: PR https://github.com/Unidata/netcdf-c/pull/2088
re: PR https://github.com/Unidata/netcdf-c/pull/2130
replaces: https://github.com/Unidata/netcdf-c/pull/2140
Changes:
* Add NCZarr-specific quantize functions to the dispatch table.
* Copy (modified) quantize code from libhdf5 to NCZarr
* Add quantize invocation to zvar.c
* Add support for _QuantizeBitgroomNumberOfSignificantDigits
and _QuantizeGranularBitgroomNumberOfSignificantDigits to ncgen.
* Modify nc_test4/tst_quantize.c to allow it to be used both for hdf5
and for nczarr.
* Make dap4 properly handle quantize functions in dispatch table.
* Add quantize attribute support to ncgen.
Other changes:
* Caught and fixed some S3 problems
* Fixed some nczarr fillvalue problems.
* Fixed some nczarr cache problems.
* Cleanup some flaws in libdispatch/dinfermodel.c
* Allow byterange requests to S3 be readable by dinfermodel.c/check_file_type
* Remove the libnczarr ztracedispatch code (big change).
re:
The current netcdf-c release has some problems with the mingw platform
on windows. Mostly they are path issues.
Changes to support mingw+msys2:
-------------------------------
* Enable option of looking into the windows registry to find
the mingw root path. In aid of proper path handling.
* Add mingw+msys as a specific platform in configure.ac and move testing
of the platform to the front so it is available early.
* Handle mingw X libncpoco (dynamic loader) properly even though
mingw does not yet support it.
* Handle mingw X plugins properly even though mingw does not yet support it.
* Alias pwd='pwd -W' to better handle paths in shell scripts.
* Plus a number of other minor compile irritations.
* Disallow the use of multiple nc_open's on the same file for windows
(and mingw) because windows does not seem to handle these properly.
Not sure why we did not catch this earlier.
* Add mountpoint info to dpathmgr.c to help support mingw.
* Cleanup dpathmgr conversions.
Known problems:
---------------
* I have not been able to get shared libraries to work, so
plugins/filters must be disabled.
* There is some kind of problem with libcurl that I have not solved,
so all uses of libcurl (currently DAP+Byterange) must be disabled.
Misc. other fixes:
------------------
* Cleanup the relationship between ENABLE_PLUGINS and various other flags
in CMakeLists.txt and configure.ac.
* Re-arrange the TESTDIRS order in Makefile.am.
* Add pseudo-breakpoint to nclog.[ch] for debugging.
* Improve the documentation of the path manager code in ncpathmgr.h
* Add better support for relative paths in dpathmgr.c
* Default the mode args to NCfopen to include "b" (binary) for windows.
* Add optional debugging output in various places.
* Make sure that everything builds with plugins disabled.
* Fix numerous (s)printf inconsistencies betweenb the format spec
and the arguments.
re: https://github.com/Unidata/netcdf-c/issues/2117
re: https://github.com/Unidata/netcdf-c/issues/2119
* Modify libsrc to allow byte-range reading of netcdf-3 files in private S3 buckets; this required using the aws sdk. Also add a test case.
* The aws sdk can sometimes cause problems if the Awd::ShutdownAPI function is not called. So at optional atexit() support to ensure it is called. This is disabled for Windows.
* Add documentation to nczarr.md on how to build and use the aws sdk under windows. Currently it builds, but testing fails.
* Switch testing from stratus to the Unidata bucket on S3.
* Improve support for the s3: url protocol.
* Add a s3 specific utility code file: ds3util.c
* Modify NC_infermodel to attempt to read the magic number of byte-ranged files in S3.
## Misc.
* Move and rename the core S3 SDK wrapper code (libnczarr/zs3sdk.cpp) to libdispatch since it now used in libsrc as well as libnczarr.
* Add calls to nc_finalize in the utilities in case atexit is disabled.
* Add header only json parser to the distribution rather than as a built source.
## S3 Related Fixes
* Add comprehensive support for specifying AWS profiles to provide access credentials.
* Parse the files "~/.aws/config" and "~/.aws/credentials to provide credentials for the HDF5 ROS3 driver and to locate default region.
* Add a function to obtain the currently active S3 credentials. The search rules are defined in docs/nczarr.md.
* Provide documentation for the new features.
* Modify the struct NCauth (in include/ncauth.h) to replace specific S3 credentials with a profile name.
* Add a unit test to test the operation of profile and credentials management.
* Add support for URLS of the form "s3://<bucket>/<key>"; this requires obtaining a default region.
* Allows the specification of profile and/or region in a URL of the form "#mode=nczarr,...&aws.region=...&aws.profile=..."
## Misc. Fixes
* Move the ezxml code to libdispatch so that it can be used both by DAP4 and nczarr.
* Modify nclist to provide a deep clone operation.
* Modify ncuri to provide a deep clone operation.
* Modify the .rc file format to allow the specification of a path to be tested when looking for an entry in the .rc file.
* Ensure that the NC_rcload function is called.
* Modify nchttp to support setting request headers.
interoperability fixed. We were given a Zarr format dataset
stored as a directory+file tree. This dataset uses the XArray
conventions and was generated by some non-Unidata Zarr implementation.
In attempting to process it with NCZarr, several interoperability
problems were discovered and fixed. This gives us more confidence
that NCZarr -- using pure zarr -- can interoperate with other
Zarr implementations.
Specific changes:
* Add test nczarr_test/run_interop.sh
* Support attributes with single value not enclosed in JSON array tags.
* Add mode inferencing and use it in nczarr_test/run_purezarr.sh
* Reduce size of tst_err_enddef.nc because it is more than 3 GB.
The netcdf-c code has to deal with a variety of platforms:
Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ
significantly in the kind of file paths that they accept. So in
order to handle this, I have created a set of replacements for
the most common file system operations such as _open_ or _fopen_
or _access_ to manage the file path differences correctly.
A more limited version of this idea was already implemented via
the ncwinpath.h and dwinpath.c code. So this can be viewed as a
replacement for that code. And in path in many cases, the only
change that was required was to replace '#include <ncwinpath.h>'
with '#include <ncpathmgt.h>' and then replace file operation
calls with the NCxxx equivalent from ncpathmgr.h Note that
recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull
request should not require dealing with winpath.
The heart of the change is include/ncpathmgmt.h, which provides
alternate operations such as NCfopen or NCaccess and which properly
parse and rebuild path arguments to work for the platform on which
the code is executing. This mostly matters for Windows because of the
way that it uses backslash and drive letters, as compared to *nix*.
One important feature is that the user can do string manipulations
on a file path without having to worry too much about the platform
because the path management code will properly handle most mixed cases.
So one can for example concatenate a path suffix that uses forward
slashes to a Windows path and have it work correctly.
The conversion code is in libdispatch/dpathmgr.c, and the
important function there is NCpathcvt which does the proper
conversions to the local path format.
As a rule, most code should just replace their file operations with
the corresponding NCxxx ones defined in include/ncpathmgmt.h. These
NCxxx functions all call NCpathcvt on their path arguments before
executing the actual file operation.
In some rare cases, the client may need to directly use NCpathcvt,
but this should be avoided as much as possible. If there is a need
for supporting a new file operation not already in ncpathmgmt.h, then
use the code in dpathmgr.c as a template. Also please notify Unidata
so we can include it as a formal part or our supported operations.
Also, if you see an operation in the library that is not using the
NCxxx form, then please submit an issue so we can fix it.
Misc. Changes:
* Clean up the utf8 testing code; it is impossible to get some
tests to work under windows using shell scripts; the args do
not pass as utf8 but as some other encoding.
* Added an extra utf8 test case: test_unicode_path.sh
* Add a true test for HDF5 1.10.6 or later because as noted in
PR https://github.com/Unidata/netcdf-c/pull/1794,
HDF5 changed its Windows file path handling.
re: https://github.com/Unidata/netcdf-c/issues/1836
Revert the internal filter code to simplify it. From the user's
point of view, the only visible changes should be:
1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h
2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter.
Internally,the dispatch table has been modified to get rid of the filter_actions
entry and associated complex structures. It has been replaced with
inq_var_filter_ids and inq_var_filter_info entries and the dispatch table
version has been bumped to 3. Corresponding NOOP and NOTNC4 functions
were added to libdispatch/dnotnc4.c. Also, the filter_action entries
in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2,
etc). This should only impact UDF users.
In the process, it became clear that the form of the filters
field in NC_VAR_INFO_T was format dependent, so I converted it to
be of type void* and pushed its management into the various dispatch
code bases. Specifically libhdf5 and libnczarr now manage the filters
field in their own way.
The auxilliary functions for parsing textual filter specifications
were moved to netcdf_aux.h and were renamed to the following:
* ncaux_h5filterspec_parse
* ncaux_h5filterspec_parselist
* ncaux_h5filterspec_free
* ncaux_h5filter_fix8
Misc. Other Changes:
1. Document NUG/filters.md updated to reflect the changes above.
2. All the old data types (structs and enums)
used by filter_actions actions were deleted.
The exception is the NC_H5_Filterspec because it is needed
by ncaux_h5filterspec_parselist.
3. Clientside filters were removed -- another enhancement
for which no-one ever asked.
4. The ability to remove filters was itself removed.
5. Some functionality needed by nczarr was moved from libhdf5
to libsrc4 e.g. nc4_find_default_chunksizes
6. All the filterx code was removed
7. ncfilter.h and nc4filter.c no longer used
Misc. Unrelated Changes:
1. The nczarr_test makefile clean was leaving some directories; so
add clean-local to take care of them.
re: Issue https://github.com/Unidata/netcdf-c/issues/1848
The existing Virtual File Driver built to support byte-range
read-only file access is quite old. It turns out to be extremely
slow (reason unknown at the moment).
Starting with HDF5 1.10.6, the HDF5 library has its own version
of such a file driver. The HDF5 developers have better knowledge
about building such a driver and what incantations are needed to
get good performance.
This PR modifies the byte-range code in hdf5open.c so
that if the HDF5 file driver is available, then it is used
in preference to the one written by the Netcdf group.
Misc. Other Changes:
1. Moved all of nc4print code to ncdump to keep appveyor quiet.
As it was, nccopy -c dim/x was sometimes being ignored. So
modify nccopy to properly take into account. This also required
a change to the nczarr code because it was not applying default
chunking in the same way as libhdf5.
Modify ncdump/tst_nccopy4.sh to test this feature properly.
Also add a similar test to nczarr_test.
Additionally, fix some other things that were causing Visual
Studio builds with testing to not work.
* fix curl testing under CMake to properly handle case
where DAP is disabled, but byterange support is enabled.
* properly test and/or define uintptr_t
* Convert _O_XXX to O_XXX flags used by open();
disengagement of enable-netcdf4 from enable-hdf5.
That is, with the advent of nczarr, it is possible
to turn off hdf5 but still need netcdf-4 enabled
because nczarr uses libsrc4, but not libhdf5.
This change involves a bunch of things:
1. Modify configure.ac and CMakelist to make enable_hdf5
control if hdf5 support is provided. For back compatibility,
disable-netcdf4 is treated as disable-hdf5. But internally,
netcdf4 support is controlled only by the enabling of formats
that require it.
2. In support of #1, modify .travis.yml to use enable/disable-hdf5
instead of enable/disable-netcdf4.
3. test_common.in is modified to track selected features,
including enable-hdf5 and enable-s3-tests. This is used in
selected tests that mix netcdf-3 and netcdf4 tests.
4. The conflation of USE_HDF5 and USE_NETCDF4 is common in
code, tests, and build files, so all of those had to be weeded out.
5. It turns out that some of the NC4_dim functions really are HDF5 specific,
but are not treated as such. So they are moved from nc4dim.c to
hdf5dim.c or hdf5dispatch.c
6. Some generic functions in libhdf5 can be (and were) moved to libsrc4.
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
