re: e-support EOT-483791
* Add a new set of remote tests based on using the thredds-test server.
* Improve error reporting when server requests fail.
* Fix handing of _NCProperties attribute
re: esupport 31942
* Add a new set of remote tests based on using the opendap hyrax server
* Re-enable --enable-dap-remote-tests as default on
* Make it possible to query the DMR separate from the DAP
so that it is possible to delay reading data until it is actually
requested. This make things like ncdump -h much more efficient.
* Fix handling of <Map>s in DMRs.
* Fix some memory leaks
Primary changes:
* Add an improved cache system to speed up performance.
* Fix NCZarr to properly handle scalar variables.
Misc. Related Changes:
* Added unit tests for extendible hash and for the generic cache.
* Add config parameter to set size of the NCZarr cache.
* Add initial performance tests but leave them unused.
* Add CRC64 support.
* Move location of ncdumpchunks utility from /ncgen to /ncdump.
* Refactor auth support.
Misc. Unrelated Changes:
* More cleanup of the S3 support
* Add support for S3 authentication in .rc files: HTTP.S3.ACCESSID and HTTP.S3.SECRETKEY.
* Remove the hashkey from the struct OBJHDR since it is never used.
re: Partly addresses issue https://github.com/Unidata/netcdf-c/issues/1712.
1. Turn on Hyrax Hack to accept Hyrax style attribute containers.
2. Support Url type as alias for String.
3. Accept the special attribute, "__DAP4_Checksum_CRC32",
to control per-variable checksums.
4. Make _DAP4_xxx attributes be reserved and only accessible
by name (ala _SuperBlock attribute).
5. Fix handling of checksums. There is a hack in the code
that uses an extra flag in the chunk header to indicate
that all variables have checksums. This violates the spec
and will be removed once it is possible to regenerate the
test cases.
Note that checksumming with the Hyrax test server has not
been tested. This, along with some other probable inconsistencies,
needs fixing when OPeNDAP and Unidata can agree on the proper
specification. Testing will be included.
https://github.com/Unidata/netcdf-c/issues/1168https://github.com/Unidata/netcdf-c/issues/1163https://github.com/Unidata/netcdf-c/issues/1162
This PR partially fixes memory leaks in the netcdf-c library,
in the ncdump utility, and in some test cases.
The netcdf-c library now runs memory clean with the assumption
that the --disable-utilities option is used. The primary remaining
problem is ncgen. Once that is fixed, I believe the netcdf-c library
will run memory clean with no limitations.
Notes
-----------
1. Memory checking was performed using gcc -fsanitize=address.
Valgrind-based testing has yet to be performed.
2. The pnetcdf, hdf4, and examples code has not been tested.
Misc. Non-leak changes
1. Make tst_diskless2 only run when netcdf4 is enabled (issue 1162)
2. Fix CmakeLists.txt to turn off logging if ENABLE_NETCDF_4 is OFF
3. Isolated all my debug scripts into a single top-level directory
called debug
4. Fix some USE_NETCDF4 dependencies in nc_test and nc_test4 Makefile.am
re: github issue https://github.com/Unidata/netcdf-c/issues/1111
One of the less common use cases for the in-memory feature is
apparently failing with HDF5-1.10.x. The fix is complicated and
requires significant changes to libhdf5/nc4memcb.c. The current
setup is detailed in the file docs/inmeminternal.dox.
Additionally, it was discovered that the program
nc_test/tst_inmemory.c, which is invoked by
nc_test/run_inmemory.sh, actually was failing because of the
above problem. But the failure is not detected since the script
does not return non-zero value.
Other Changes:
1. Fix nc_test_tst_inmemory to return errors correctly.
2. Make ncdap_tests/findtestserver.c and dap4_tests/findtestserver4.c
be generated from ncdap_test/findtestserver.c.in.
3. Make LOG() print output to stderr instead of stdout to
avoid contaminating e.g. ncdump output.
4. Modify the handling of NC_INMEMORY and NC_DISKLESS flags
to properly handle that NC_DISKLESS => NC_INMEMORY. This
affects a number of code pieces, especially memio.c.
Add the ability to set some additional curlopt values via .daprc (aka .dodsrc).
This effects both DAP2 and DAP4 protocols.
Related issues:
[1] re: esupport: KOZ-821332
[2] re: github issue https://github.com/Unidata/netcdf4-python/issues/836
[3] re: github issue https://github.com/Unidata/netcdf-c/issues/1074
1. CURLOPT_BUFFERSIZE: Relevant to [1]. Allow user to set the read/write
buffersizes used by curl.
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.READ.BUFFERSIZE=n
where n is the buffersize in bytes. There is a built-in (to curl)
limit of 512k for this value.
2. CURLOPT_TCP_KEEPALIVE (and CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL):
Relevant (maybe) to [2] and [3]. Allow the user to turn on KEEPALIVE
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.KEEPALIVE=on|n/m
If the value is "on", then simply enable default KEEPALIVE. If the value
is n/m, then enable KEEPALIVE and set KEEPIDLE to n and KEEPINTVL to m.
generates garbage. This in turn interferes with using .netrc
because the garbage user+pwd can will override the
.netrc. Note that this may work ok sometimes
if the garbage happens to start with a nul character.
2. It turns out that the user:pwd combination needs to support
character escaping. One reason is the user may contain an '@' character.
The other is that modern password rules make it not unlikely that
the password will contain characters that interfere with url parsing.
So, the rule I have implemented is that all occurrences of the user:pwd
format must escape any dodgy characters. The escape format is URL escaping
of the form %XX. This applies both to user:pwd
embedded in a URL as well as the use of HTTP.CREDENTIALS.USERPASSWORD
in a .dodsrc/.daprc file. The user and password in .netrc must not
be escaped. This is now documented in docs/auth.md
The fix for #2 actually obviated #1. Now, internally, the user and pwd
are stored separately and not in the user:pwd format. They are combined
(and escaped) only when needed.
dap code will create a real temporary file in which to store the
converted metadata for the DAP .dds or .dmr.
It was assumed that the nc_close code would reclaim the
temporary file. For DAP2, reclamation occurs in the ncio
code. For DAP4, it was assumed that the libsrc4 code would do
the reclamation, but for whatever reason, this is not happening.
Thus, in this situation, a temporary file is left in the file
system. Aside from being irritating to users, this screws up
'make distcheck'.
So the DAP4 code is fixed to ensure that the temporary file is
properly reclaimed independent of the libsrc4 code.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
