These changes seem to be correct for the generation of `netcdf_meta.h` in a CMake build. I think this addresses #1723
There is still an issue with the libnetcdf.settings
The current method of setting the `HDF5_HAS_PAR_FILTERS` and `HAS_PAR_FILTERS` variables is done purely based on the `HDF5_VERSION` and that variable is only set inside the if block which finds the HDF5 library based on CMake package files. If the user specifies the explicit location of the HDF5 library and include files (for example, via:
```
-DHDF5_C_LIBRARY:PATH=${INSTALL_PATH}/lib/libhdf5.${LD_EXT} \
-DHDF5_HL_LIBRARY:PATH=${INSTALL_PATH}/lib/libhdf5_hl.${LD_EXT} \
-DHDF5_INCLUDE_DIR:PATH=${INSTALL_PATH}/include
```
Then, the code path which determines whether the par filters variables is set is not run. However, later on in the file, there is another check for parallel filter support (near line 759):
```
# Check to see if this is hdf5-1.10.3 or later.
CHECK_LIBRARY_EXISTS(${HDF5_C_LIBRARY_hdf5} H5Dread_chunk "" HDF5_SUPPORTS_PAR_FILTERS)
```
This PR moves the code that sets the two other par filters variables down after this check and instead of setting their values based on the version, it bases it on the results of this test.
I'm not totally sure why there are three variables; it looks like the `HDF5_SUPPORTS_PAR_FILTERS` and `HDF5_HAS_PAR_FILTERS` could be combined. I think the `HAS_PAR_FILTERS` is a string which is used to show the results of the configuration and the other two are booleans.
The new check should work for both types of HDF5 installs (cmake-based and configure-based)
re: Github issue https://github.com/Unidata/netcdf-c/issues/1713
If nc_def_var_filter or nc_def_var_deflate or nc_def_var_szip is
called multiple times with the same filter id, but possibly with
different sets of parameters, then the first invocation is
sticky and later invocations are ignored. The desired behavior
is to have the last invocation be used.
This PR implements that desired behavior, with some special
cases. If you call nc_def_var_deflate multiple times, then the
last invocation rule applies with respect to deflate. However,
the shuffle filter, if enabled, is always applied just before
applying deflate.
Misc unrelated changes:
1. Make client-side filters be disabled by default
2. Fix the definition of uintptr_t and use in oc2 and libdap4
3. Add some test cases
4. modify filter order tests to use plugin filters rather
than client-side filters
re: https://github.com/Unidata/netcdf-c/issues/1684
re: e-support VZL-904142
Two issues:
1. As of libcurl 7.66, the semantics of CURLOPT_SSL_VERIFYHOST
changed so that the non-zero values affects certificate processing.
2. The current library was forcing the values of VERIFYPEER
and VERIFYHOST to zero instead of leaving them to the default values.
Solution was first to leave the defaults in place for VERIFYPEER and VERIFYHOST
as long as they are not set in .ocrc/.dodsrc file.
Second, the value of HTTP.SSL.VERIFYPEER or HTTP.SSL.VERIFYHOST
as set in .ocrc/.dodrc is used to set the corresponding CURLOPT flags.
So for example, adding
> HTTP.SSL.VERIFYHOST=2
will set the value of CURLOPT_SSL_VERIFYHOST to 2, the default.
Using
> HTTP.SSL.VERIFYHOST=0
will set the value of CURLOPT_SSL_VERIFYHOST to 0, which disables it.
Similarly for VERIFYPEER.
Finally the semantics of HTTP.SSL.VALIDATE is now equivalent to
> HTTP.SSL.VERIFYPEER=1
> HTTP.SSL.VERIFYHOST=2
The `FIND_PATH` function has a non-intuitive order in which is searches for include paths and the original form could find a system-installed version of HDF5 even though the developer specified an explicit path via `HDF5_INCLUDE_DIR`. See https://cmake.org/cmake/help/latest/command/find_path.html for more information.
The form in this patch is the recommended method from that page for changing the default search order to find the explicitly specified path *first*
> The default search order is designed to be most-specific to least-specific for common use cases. Projects may override the order by simply calling the command multiple times and using the NO_* options:
```
find_path (<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
find_path (<VAR> NAMES name)
```
> Once one of the calls succeeds the result variable will be set and stored in the cache so that no call will search again.
re: https://github.com/Unidata/netcdf-c/issues/1584
Support has been added for multiple filters per variable. This
affects a number of components in netcdf. The new APIs are
documented in NUG/filters.md.
The primary changes are:
* A set of new functions are provided (see __include/netcdf_filter.h__).
- Obtain a list of the filters associated with a variable
- Obtain the parameters for a specific filter.
* The existing __nc_inq_var_filter__ function now returns info
about the first defined filter.
* The utilities (ncgen, ncdump, and nccopy) now support
an extended format for specifying a sequence of filters.
The general form is __<filter>|<filter>..._.
* The ncdump **_Filter** attribute now dumps a list of all the
filters associated with a variable using the above new format.
* Filter specifications can now use a filter name instead of number
for filters known to the netcdf library, which in turn is taken
from the HDF5 filter registration page.
* New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter
is returned if an attempt is made to access an unknown filter.
* Internally, the dispatch table has been extended to add a function
to handle all of the filter functions.
* New, filter-related, tests were added to nc_test4.
* A new plugin was added to the plugins directory to help with testing.
Notes:
1. The shuffle and fletcher32 filters are not part of the multifilter system.
Misc. changes:
1. A debug module was added to libhdf5 to help catch error locations.
Modern CMake tracks the properties of targets so that down stream
libraries do not have to worry about include directories. However, the
include directories must be added to the target and not just at the
directory level.
supercede PR: https://github.com/Unidata/netcdf-c/pull/1384
Since we have an mmap user, undeprecate it and make sure
it works. Other changes:
* fix test cases to work with make -j
* fix exposed ncgen error.
re: https://github.com/Unidata/thredds/issues/1224
[note that this is an issue in thredds, but the fix is in netcdf-c]
A thredds server can encode a netcdf-4 file into DAP2
by flattening names to include the containing group path,
where the group names are separated by '/'.
But the '/' is prohibited in netcdf names even if escaped
(a decision before my time).
So, if the netcdf-c/libdap2 code encounters a DAP2 name with '/'
characters, the '/' characters are converted to the string
%2f. Unfortunately, there is a glitch, namely that converting
the leading '/' produces a name that is still illegal. This PR
modifies the code to just drop the leading '/' character.
Since 209c31d3 (Bringing config.h as generagted by cmake in line with config.h as generated by autotools., 2017-01-27)
we check that we can find the hdf5.h main include file.
But this file may reside in non-standard location so we have to search
in HDF5_INCLUDE_DIR as well.
re: issue https://github.com/Unidata/netcdf-c/issues/1251
Assume that you have the URL to a remote dataset
which is a normal netcdf-3 or netcdf-4 file.
This PR allows the netcdf-c to read that dataset's
contents as a netcdf file using HTTP byte ranges
if the remote server supports byte-range access.
Originally, this PR was set up to access Amazon S3 objects,
but it can also access other remote datasets such as those
provided by a Thredds server via the HTTPServer access protocol.
It may also work for other kinds of servers.
Note that this is not intended as a true production
capability because, as is known, this kind of access to
can be quite slow. In addition, the byte-range IO drivers
do not currently do any sort of optimization or caching.
An additional goal here is to gain some experience with
the Amazon S3 REST protocol.
This architecture and its use documented in
the file docs/byterange.dox.
There are currently two test cases:
1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle
for a remote netcdf-3 file and a remote netcdf-4 file.
2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote
datasets.
This PR also incorporates significantly changed model inference code
(see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259).
1. It centralizes the code that infers the dispatcher.
2. It adds support for byte-range URLs
Other changes:
1. NC_HDF5_finalize was not being properly called by nc_finalize().
2. Fix minor bug in ncgen3.l
3. fix memory leak in nc4info.c
4. add code to walk the .daprc triples and to replace protocol=
fragment tag with a more general mode= tag.
Final Note:
Th inference code is still way too complicated. We need to move
to the validfile() model used by netcdf Java, where each
dispatcher is asked if it can process the file. This decentralizes
the inference code. This will be done after all the major new
dispatchers (PIO, Zarr, etc) have been implemented.
Primary fixes to get -ansi to work.
1. Convert all '//' C++ style comments to /*...*/ or to use #if 0...#endif
2. It turns out that when -ansi is specified, then a number of
functions no longer are defined in the header -- but they are still
in the .so file.<br>
The big example is strdup(). So, added code to include/ncconfig.h to define
externs for those missing functions that occur in more than one place.
These are enabled if !_WIN32 && __STDC__ == 1 (__STDC__ is supposed to
be the equivalent compile time flag to -ansi). Note that this requires
config.h (which references ncconfig.h) to be included in files where it is
currently not included. Single uses will be only in the file that uses them.
3. Added mmap test for the MAP_ANONYMOUS flag to configure.ac. Apparently
this is not always defined with -ansi.
4. fix some large integer constants in nc_test4/tst_atts3.c and nc_test4/tst_filterparser.c
to avoid compiler complaints.
5. fix a double constant in nc_test4/tst_filterparser.c to avoid compiler complaints.
[Note I suspect #4 and #5 will be a problem on big-endian machines, but we have no way to test]
Misc. Changes:
1. convert more instances of _MSC_VER to _WIN32.
2. added some debugging code to include/nctestserver.h
3. added comment about libdispatch/drc.c always being compiled.
4. modify parser generation in ncgen to remove unneeded files.
If not building shared libraries, then the RPATH handling should not be specified. Although ignored on some compilers, the CRAY / Intel compiler will error out when installing the NetCDF executables if the RPATH settings are enabled.
https://github.com/Unidata/netcdf-c/issues/1168https://github.com/Unidata/netcdf-c/issues/1163https://github.com/Unidata/netcdf-c/issues/1162
This PR partially fixes memory leaks in the netcdf-c library,
in the ncdump utility, and in some test cases.
The netcdf-c library now runs memory clean with the assumption
that the --disable-utilities option is used. The primary remaining
problem is ncgen. Once that is fixed, I believe the netcdf-c library
will run memory clean with no limitations.
Notes
-----------
1. Memory checking was performed using gcc -fsanitize=address.
Valgrind-based testing has yet to be performed.
2. The pnetcdf, hdf4, and examples code has not been tested.
Misc. Non-leak changes
1. Make tst_diskless2 only run when netcdf4 is enabled (issue 1162)
2. Fix CmakeLists.txt to turn off logging if ENABLE_NETCDF_4 is OFF
3. Isolated all my debug scripts into a single top-level directory
called debug
4. Fix some USE_NETCDF4 dependencies in nc_test and nc_test4 Makefile.am
re: https://github.com/Unidata/netcdf-c/issues/1154
Inadvertently, the behavior of NC_DISKLESS with nc_create() was
changed in release 4.6.1. Previously, the NC_WRITE flag needed
to be explicitly used with NC_DISKLESS in order to cause the
created file to be persisted to disk.
Additional analyis indicated that the current NC_DISKLESS
implementation was seriously flawed.
This PR attempts to clean up and regularize the situation with
respect to NC_DISKLESS control. One important aspect of diskless
operation is that there are two different notions of write.
1. The file is read-write vs read-only when using the netcdf API.
2. The file is persisted or not to disk at nc_close().
Previously, these two were conflated. The rules now are
as follows.
1. NC_DISKLESS + NC_WRITE means that the file is read/write using the netcdf API
2. NC_DISKLESS + NC_PERSIST means that the file is persisted to a disk file at nc_close.
3. NC_DISKLESS + NC_PERSIST + NC_WRITE means both 1 and 2.
The NC_PERSIST flag is new and takes over the obsolete NC_MPIPOSIX flag.
NC_MPIPOSIX is still defined, but is now an alias for the NC_MPIIO flag.
It is also now the case that for netcdf-4, NC_DISKLESS is independent
of NC_INMEMORY and in fact it is an error to specify both flags
simultaneously.
Finally, the MMAP code was fixed to use NC_PERSIST as well.
Also marked MMAP as deprecated.
Also added a test case to test various combinations of NC_DISKLESS,
NC_PERSIST, and NC_WRITE.
This PR affects a number of files and especially test cases
that used NC_DISKLESS.
Misc. Unrelated fixes
1. fixed some warnings in ncdump/dumplib.c
re: issue https://github.com/Unidata/netcdf-c/issues/1151
Modify DAP2 and DAP4 code to handle case when _FillValue type is not
same as the parent variable type.
Specifically:
1. Define a parameter [fillmismatch] to allow this mismatch;
default is to disallow.
2. If allowed, forcibly change the type of the _FillValue to match
the parent variable.
3. If allowed Convert the values to match new type
4. Generate a log message
5. if not allowed, then fail
Implementing this required some changes to ncdap_test/dapcvt.c
Also added test cases.
Minor Unrelated Changes:
1. There were a number of warnings about e.g.
assigning a const char* to a char*. Fix these
2. In nccopy.1, replace .NP with .IP "n"
(re PR https://github.com/Unidata/netcdf-c/pull/1144)
3. fix minor error in ncdump/ocprint
re: github issue https://github.com/Unidata/netcdf-c/issues/1111
One of the less common use cases for the in-memory feature is
apparently failing with HDF5-1.10.x. The fix is complicated and
requires significant changes to libhdf5/nc4memcb.c. The current
setup is detailed in the file docs/inmeminternal.dox.
Additionally, it was discovered that the program
nc_test/tst_inmemory.c, which is invoked by
nc_test/run_inmemory.sh, actually was failing because of the
above problem. But the failure is not detected since the script
does not return non-zero value.
Other Changes:
1. Fix nc_test_tst_inmemory to return errors correctly.
2. Make ncdap_tests/findtestserver.c and dap4_tests/findtestserver4.c
be generated from ncdap_test/findtestserver.c.in.
3. Make LOG() print output to stderr instead of stdout to
avoid contaminating e.g. ncdump output.
4. Modify the handling of NC_INMEMORY and NC_DISKLESS flags
to properly handle that NC_DISKLESS => NC_INMEMORY. This
affects a number of code pieces, especially memio.c.
Add the ability to set some additional curlopt values via .daprc (aka .dodsrc).
This effects both DAP2 and DAP4 protocols.
Related issues:
[1] re: esupport: KOZ-821332
[2] re: github issue https://github.com/Unidata/netcdf4-python/issues/836
[3] re: github issue https://github.com/Unidata/netcdf-c/issues/1074
1. CURLOPT_BUFFERSIZE: Relevant to [1]. Allow user to set the read/write
buffersizes used by curl.
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.READ.BUFFERSIZE=n
where n is the buffersize in bytes. There is a built-in (to curl)
limit of 512k for this value.
2. CURLOPT_TCP_KEEPALIVE (and CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL):
Relevant (maybe) to [2] and [3]. Allow the user to turn on KEEPALIVE
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.KEEPALIVE=on|n/m
If the value is "on", then simply enable default KEEPALIVE. If the value
is n/m, then enable KEEPALIVE and set KEEPIDLE to n and KEEPINTVL to m.
stored in the _NCProperties attribute to allow two things:
1. capture of additional library dependencies (over and above
hdf5)
2. Recognition of non-netcdf libraries that create netcdf-4 format
files.
To this end, the _NCProperties format has been extended to be
and arbitrary set of key=value pairs separated by commas.
This new format has version = 2, and uses commas as the pair separator.
Thus the general form is:
_NCProperties = "version=2,key1=value,key2=value2..." ;
This new version is accompanied by a new ./configure option of the form
--with-ncproperties="key1=value1,key2=value2..."
that specifies pairs to add to the _NCProperties attribute for all
files created with that netcdf library.
At this point, what is missing is some programmatic way to
specify either all the pairs or additional pairs
to the _NCProperties attribute. Not sure of the best way
to do this.
Builders using non-netcdf libraries can specify
whatever they want in the key value pairs (as long
as the version=2 is specified first).
By convention, the primary library is expected to be the
the first pair after the leading version=2 pair, but this
is convention only and is neither required nor enforced.
Related changes:
1. Fixed the tests that check _NCProperties to properly operate with version=2.
2. When reading a version 1 _NCProperties attribute, convert it to look
like a version 2 attribute.
2. Added some version 2 tests to ncdump/tst_fileinfo.c and
ncdump/tst_fileinfo.sh
Misc Changes:
1. Fix minor problem in ncdap_test/testurl.sh where a parameter to
buildurl needed to be quoted.
2. Minor fix to ncgen to swap switches -H and -h to be consistent
with other utilities.
3. Document the -M flag in nccopy usage() and the nccopy man page.
4. Modify a test case to use the nccopy -M flag.
in the docs directory.
1. Add a new internal document -- testserver.dox -- to describe
how to set up and maintain the dap test server.
2. It moves the internal documentation (internal.dox, indexing.dox,
and testserver.dox) to later in the documentation table of contents.
3. Cleanup the formatting of the internal documents.
4. Cleanup some minor doxygen issues in other files.
So it now becomes the first default test server to try.
This also means that the dap4 remote testing is enabled.
The only issue to watch is to see if the jetstream-based
server can stay up for significant periods of time.
A uptimerobot (https://uptimerobot.com) has been set ups
to monitor this hourly, so we shall see.
Fix https://github.com/Unidata/netcdf-c/issues/962
1. remove the --disable-diskless option since it is no
longer needed. Similarly for CMakeLists.txt.
2. Fixed nc4files.c where BAIL and return were mixed
leading to situation where cleanup code was not
being invoked. This probably occurs elsewhere,
but I did not find any specifically.
The file docs/indexing.dox tries to provide design
information for the refactoring.
The primary change is to replace all walking of linked
lists with the use of the NCindex data structure.
Ncindex is a combination of a hash table (for name-based
lookup) and a vector (for walking the elements in the index).
Additionally, global vectors are added to NC_HDF5_FILE_INFO_T
to support direct mapping of an e.g. dimid to the NC_DIM_INFO_T
object. These global vectors exist for dimensions, types, and groups
because they have globally unique id numbers.
WARNING:
1. since libsrc4 and libsrchdf4 share code, there are also
changes in libsrchdf4.
2. Any outstanding pull requests that change libsrc4 or libhdf4
are likely to cause conflicts with this code.
3. The original reason for doing this was for performance improvements,
but as noted elsewhere, this may not be significant because
the meta-data read performance apparently is being dominated
by the hdf5 library because we do bulk meta-data reading rather
than lazy reading.
In C, `char`, `signed char`, and `unsigned char` are three separate,
distinct types, so just because `char` happens to be signed does not
mean it is interchangeable with `signed char`.
(I hope) metadata mechanism. This mostly just adds new pieces of
code (e.g. nclistmap) and does some minor fixes.
It should be transparent to everything else.
The next set of changes will be the big step.
