re: e-support EOT-483791
* Add a new set of remote tests based on using the thredds-test server.
* Improve error reporting when server requests fail.
* Fix handing of _NCProperties attribute
re: https://github.com/Unidata/netcdf-c/issues/1996
Improve the error message and location that is reported when reading a filter with a variable that uses a filter that is not available on the reading platform.
This requires checking the availability of the filter, recording it, and failing when any attempt is made to read or write that variable. A test case was added for this in tst_filter.sh. Also, LOG level 0 message is generated giving the variable and the filter id.
Note that by design if there is no attempt to read or write the variable, then no error is reported; this means that, for example, ncdump -h will list the filter even though it is not actually available. This is important for allowing a user to see the filter details.
re: https://github.com/Unidata/netcdf-c/issues/1923
re: https://github.com/Unidata/netcdf-c/issues/1921
The issue was raised about the order of returned filter ids
for nc_inq_var_filter_ids() when creating a file as opposed
to later reading the file.
For creation, the order is the same as the order in which the
calls to nc_def_var_filter() occur.
However, after the file is closed and then reopened for reading,
the question was raised if the returned order is the same or the reverse.
In fact the order is the same in both cases.
This PR extends the existing filter order testcase to check the create
versus read orders. This also required changing the H5Znoop(1) filters
in the plugins directory.
Misc. Unrelated Changes
1. fix calls to fdopen under windows
2. Temporarily suppres the nczarr_tests/run_chunkcases test
since it seems to be causing problems with github actions.
There were some irregularities in the flags for handling NCZarr S3 support.
The primary change is to regularize the flags controlling this to the following.
1. Automake: --enable-nczarr-s3 and CMake: ENABLE_NCZARR_S3
2. Automake: --enable-nczarr-s3-tests and CMake: ENABLE_NCZARR_S3_TESTS
Flag 1 indicates that NCZarr should be built with S3 support enabled.
Flag 2 indicates that the NCZarr S3 tests should be run
These two flags are separate because running the NCZarr S3 tests
requires access to protected S3 resources. Currently, running
these tests is restricted to Unidata personnel. However, users
may want to enable S3 support even if they cannot run the tests.
It is, of course, an error to specify 2 without specifying 1.
Additionally, if the AWS S3 SDK library is not found, then the NCZARR S3
support and testing must be disabled. Otherwise an error is signaled
during the build.
Some of these NCZarr and S3 changes are propagated to nc-config.
Misc. Other Changes:
1. Allow testing for CYGWIN or MSVC in shell scripts.
2. Add specific test for HDF5 library version 1.10.6.
This is encoded as "HDF5_UTF8_PATHS" because that is the first
version where HDF5 properly supports it under Windows. This is used
in hdf5internal/nc4_ndf5_ansi_to_utf8.
3. Add a AM Conditional -- AX_IGNORE -- for use in testing
when it is desirable to temporarily suppress Makefile code.
4. Add MULTIFILTER flag to CMakeLists.txt
re: https://github.com/Unidata/netcdf-c/issues/1836
Revert the internal filter code to simplify it. From the user's
point of view, the only visible changes should be:
1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h
2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter.
Internally,the dispatch table has been modified to get rid of the filter_actions
entry and associated complex structures. It has been replaced with
inq_var_filter_ids and inq_var_filter_info entries and the dispatch table
version has been bumped to 3. Corresponding NOOP and NOTNC4 functions
were added to libdispatch/dnotnc4.c. Also, the filter_action entries
in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2,
etc). This should only impact UDF users.
In the process, it became clear that the form of the filters
field in NC_VAR_INFO_T was format dependent, so I converted it to
be of type void* and pushed its management into the various dispatch
code bases. Specifically libhdf5 and libnczarr now manage the filters
field in their own way.
The auxilliary functions for parsing textual filter specifications
were moved to netcdf_aux.h and were renamed to the following:
* ncaux_h5filterspec_parse
* ncaux_h5filterspec_parselist
* ncaux_h5filterspec_free
* ncaux_h5filter_fix8
Misc. Other Changes:
1. Document NUG/filters.md updated to reflect the changes above.
2. All the old data types (structs and enums)
used by filter_actions actions were deleted.
The exception is the NC_H5_Filterspec because it is needed
by ncaux_h5filterspec_parselist.
3. Clientside filters were removed -- another enhancement
for which no-one ever asked.
4. The ability to remove filters was itself removed.
5. Some functionality needed by nczarr was moved from libhdf5
to libsrc4 e.g. nc4_find_default_chunksizes
6. All the filterx code was removed
7. ncfilter.h and nc4filter.c no longer used
Misc. Unrelated Changes:
1. The nczarr_test makefile clean was leaving some directories; so
add clean-local to take care of them.
re: Github Issue https://github.com/Unidata/netcdf-c/issues/1826
It turns out that the common get code (NC4_get_vars) in libhdf5
(and libnczarr) has an optimization where it does not attempt to
read from the file if the file is all fill values. Rather it
just fills the output buffer with the fill value. The problem
is that -- in that case -- it forgets that conversion might still be
needed. So the conversion never occurs and the raw bits of
the fill data are stored directly into the memory space.
Solution: move some code around to properly do the
conversion no matter how the data was obtained.
Added a test cases nc_test4/test_fillonly.sh and
nczarr_test/test_fillonlyz.sh
disengagement of enable-netcdf4 from enable-hdf5.
That is, with the advent of nczarr, it is possible
to turn off hdf5 but still need netcdf-4 enabled
because nczarr uses libsrc4, but not libhdf5.
This change involves a bunch of things:
1. Modify configure.ac and CMakelist to make enable_hdf5
control if hdf5 support is provided. For back compatibility,
disable-netcdf4 is treated as disable-hdf5. But internally,
netcdf4 support is controlled only by the enabling of formats
that require it.
2. In support of #1, modify .travis.yml to use enable/disable-hdf5
instead of enable/disable-netcdf4.
3. test_common.in is modified to track selected features,
including enable-hdf5 and enable-s3-tests. This is used in
selected tests that mix netcdf-3 and netcdf4 tests.
4. The conflation of USE_HDF5 and USE_NETCDF4 is common in
code, tests, and build files, so all of those had to be weeded out.
5. It turns out that some of the NC4_dim functions really are HDF5 specific,
but are not treated as such. So they are moved from nc4dim.c to
hdf5dim.c or hdf5dispatch.c
6. Some generic functions in libhdf5 can be (and were) moved to libsrc4.
In commit ba6ab3, the `tst_gfs_data_1.c` file was moved from `nc_test4` to `nc_perf`, but the test/executable that uses that file was not removed from nc_test4 CMakeLists.txt
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
Fix Issue https://github.com/Unidata/netcdf-c/issues/1725.
Replace PR https://github.com/Unidata/netcdf-c/pull/1726
Also replace PR https://github.com/Unidata/netcdf-c/pull/1694
The general problem is that under Visual Studio, we are seeing
a number of undefined reference and other scoping errors.
The reason is that the code is not properly using Visual Studio
_declspec() declarations.
The basic solution is to ensure that when compiling the code itself
one needs to ensure that _declspec(dllexport) is used. There
are several sets of macros to handle this, but they all rely
on the flag DLL_EXPORT being define when the code is compiled,
but not being defined when the code is used via a .h file.
As a test, I modified XGetOpt.c to build properly. I also
fixed the oc2 library to properly _declspec things like ocdebug.
I also made some misc. changes to get all the tests to run
if cygwin is installed (to get bash, sed, etc).
Misc. Changes:
* Put XGetOpt.c into libsrc and copy at build time
to the other directories where it is needed.
re: Github issue https://github.com/Unidata/netcdf-c/issues/1713
If nc_def_var_filter or nc_def_var_deflate or nc_def_var_szip is
called multiple times with the same filter id, but possibly with
different sets of parameters, then the first invocation is
sticky and later invocations are ignored. The desired behavior
is to have the last invocation be used.
This PR implements that desired behavior, with some special
cases. If you call nc_def_var_deflate multiple times, then the
last invocation rule applies with respect to deflate. However,
the shuffle filter, if enabled, is always applied just before
applying deflate.
Misc unrelated changes:
1. Make client-side filters be disabled by default
2. Fix the definition of uintptr_t and use in oc2 and libdap4
3. Add some test cases
4. modify filter order tests to use plugin filters rather
than client-side filters
re: https://github.com/Unidata/netcdf-c/issues/1693
1. Add functions to libdispatch/dnotnc4.c to support
dispatch table operations that should work for any
dispatch table, even if they do not do anything.
Functions such as nc_inq_var_filter.
2. Modify selected dispatch tables to utilize
the noop functions.
3. Extend nc_test/tst_formats.c to test.
This is an extension of Ed's work to do this for
chunking and deflate and szip. See PRs
https://github.com/Unidata/netcdf-c/pull/1697
and
https://github.com/Unidata/netcdf-c/pull/1692
As a side effect, elide libdispatch/dnotnc3.c since
it is no longer used.
re: issue https://github.com/Unidata/netcdf-c/issues/1687
static functions are being used before decl and it causes
errors. Only occurs when BIG_ENDIAN is defined.
Solution is to add the forward declarations.
re: https://github.com/Unidata/netcdf-c/issues/1584
Support has been added for multiple filters per variable. This
affects a number of components in netcdf. The new APIs are
documented in NUG/filters.md.
The primary changes are:
* A set of new functions are provided (see __include/netcdf_filter.h__).
- Obtain a list of the filters associated with a variable
- Obtain the parameters for a specific filter.
* The existing __nc_inq_var_filter__ function now returns info
about the first defined filter.
* The utilities (ncgen, ncdump, and nccopy) now support
an extended format for specifying a sequence of filters.
The general form is __<filter>|<filter>..._.
* The ncdump **_Filter** attribute now dumps a list of all the
filters associated with a variable using the above new format.
* Filter specifications can now use a filter name instead of number
for filters known to the netcdf library, which in turn is taken
from the HDF5 filter registration page.
* New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter
is returned if an attempt is made to access an unknown filter.
* Internally, the dispatch table has been extended to add a function
to handle all of the filter functions.
* New, filter-related, tests were added to nc_test4.
* A new plugin was added to the plugins directory to help with testing.
Notes:
1. The shuffle and fletcher32 filters are not part of the multifilter system.
Misc. changes:
1. A debug module was added to libhdf5 to help catch error locations.
