1. Issue https://github.com/Unidata/netcdf-c/issues/2043
* FreeBSD build fails because of conflicts in defining the fileno() function. So removed all extern declarations of fileno.
2. Issue https://github.com/Unidata/netcdf-c/issues/2124
* There were a couple of problems here.
* I was conflating msys with mingw and they need separate handling of paths. So treat mingw like windows.
* memio.c was not always writing the full content of the memory to file. Untested fix by properly accounting for zero size writes.
* Fix bug when skipping white space in tst_xcache.c
3. Issue https://github.com/Unidata/netcdf-c/pull/2105
* On MINGW, bash and other POSIX utilities use a mounted root directory,
but executables compiled for Windows do not recognise the mount point.
Ensure that Windows paths are used in tests of Windows executables.
4. Issue https://github.com/Unidata/netcdf-c/issues/2132
* Apparently the Intel C compiler on OSX defines isnan etc.
So disable declaration in dutil.c under that condition.
5. Fix and re-enable test_rcmerge.sh by allowing override of where to
look for .rc files
6. CMakeLists.txt suppresses certain ncdump directory tests because of differences in printing floats/doubles.
* Extend the list to include those that also fail under mingw.
* Suppress the mingw tests in ncdump/Makefile.am
re: https://github.com/Unidata/netcdf-c/issues/2119
H/T to [Egbert Eich](https://github.com/e4t) and [Bas Couwenberg](https://github.com/sebastic) for this PR.
It is undesirable to make netcdf be dependent on the availability
of libxml2, but it is desirable to allow its use if available.
In order to do this, a wrapper API (include/ncxml.h) was constructed
that supports either ezxml or libxml2 as the implementation.
Additionally, the xml support code was moved to a new directory
netcdf-c/libncxml.
Primary changes:
* Create a new sub-directory named netcdf-c/libncxml to hold all the xml implementation code.
* Move ezxml.c and ezxml.h to libncxml
* Create a wrapper API -- include/ncxml.h
* Create an implementation, ncxml_ezxml.c to support use of ezxml.
* Create an implementation, ncxml_xml2.c to support use of libxml2.
* Add a check for libxml2 in configure.ac and CMakeLists.txt
* Modify libdap to use the wrapper API instead of ezxml directly.
Misc. Other Changes:
* Change include/netcdf_json.h from built source to be part of the distribution.
re: https://github.com/Unidata/netcdf-c/issues/2117
re: https://github.com/Unidata/netcdf-c/issues/2119
* Modify libsrc to allow byte-range reading of netcdf-3 files in private S3 buckets; this required using the aws sdk. Also add a test case.
* The aws sdk can sometimes cause problems if the Awd::ShutdownAPI function is not called. So at optional atexit() support to ensure it is called. This is disabled for Windows.
* Add documentation to nczarr.md on how to build and use the aws sdk under windows. Currently it builds, but testing fails.
* Switch testing from stratus to the Unidata bucket on S3.
* Improve support for the s3: url protocol.
* Add a s3 specific utility code file: ds3util.c
* Modify NC_infermodel to attempt to read the magic number of byte-ranged files in S3.
## Misc.
* Move and rename the core S3 SDK wrapper code (libnczarr/zs3sdk.cpp) to libdispatch since it now used in libsrc as well as libnczarr.
* Add calls to nc_finalize in the utilities in case atexit is disabled.
* Add header only json parser to the distribution rather than as a built source.
## Examine and fix ezxml errors
re: Issue https://github.com/Unidata/netcdf-c/issues/2119
Multiple security issues were found in ezxml (see above Issue).
* CVE-2021-31598
* CVE-2021-31348 / CVE-2021-31347
* CVE-2021-31229
* CVE-2021-30485
* CVE-2021-26222
* CVE-2021-26221
* CVE-2021-26220
* CVE-2019-20202
* CVE-2019-20201
* CVE-2019-20200
* CVE-2019-20199
* CVE-2019-20198
* CVE-2019-20007
* CVE-2019-20006
* CVE-2019-20005
In addition, moved ezxml to libdispatch.
## Examine and fix selected oss-fuzz detected errors
Note that most of these errors are in the libsrc .m4 generated
code so fixing them is difficult. It would nice if we could tell
oss-fuzz to skip those files. They are old and crufty and
probably need a complete refactor.
Issue|Status
-----|------
35382|Fixed; old bug
35398|Closed by OSS-Fuzz
35442|Guarantee alloc > 0 or error; Old bug
35721|Assert failure; ok
35992|Fixed; old bug
36038|Fixed; old bug
36129|Unfixed; old bug
36229|Fixed by adding assert; old bug
37476|Unfixed; old bug
37824|Assert Failure; ok
38300|Closed by OSS-Fuzz
38537|Unfixed; old bug
38658|Unfixed; old bug
38699|Fixed maybe; old bug
38772|Nature of error is unclear, suspect that it results from using too large a type.
39248|Need more information
39394|Unfixed; old bug
## S3 Related Fixes
* Add comprehensive support for specifying AWS profiles to provide access credentials.
* Parse the files "~/.aws/config" and "~/.aws/credentials to provide credentials for the HDF5 ROS3 driver and to locate default region.
* Add a function to obtain the currently active S3 credentials. The search rules are defined in docs/nczarr.md.
* Provide documentation for the new features.
* Modify the struct NCauth (in include/ncauth.h) to replace specific S3 credentials with a profile name.
* Add a unit test to test the operation of profile and credentials management.
* Add support for URLS of the form "s3://<bucket>/<key>"; this requires obtaining a default region.
* Allows the specification of profile and/or region in a URL of the form "#mode=nczarr,...&aws.region=...&aws.profile=..."
## Misc. Fixes
* Move the ezxml code to libdispatch so that it can be used both by DAP4 and nczarr.
* Modify nclist to provide a deep clone operation.
* Modify ncuri to provide a deep clone operation.
* Modify the .rc file format to allow the specification of a path to be tested when looking for an entry in the .rc file.
* Ensure that the NC_rcload function is called.
* Modify nchttp to support setting request headers.
Filter support has three goals:
1. Use the existing HDF5 filter implementations,
2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr,
3. Allow filters to be used even when HDF5 is disabled
Detailed usage directions are define in docs/filters.md.
For now, the existing filter API is left in place. So filters
are defined using ''nc_def_var_filter'' using the HDF5 style
where the id and parameters are unsigned integers.
This is a big change since filters affect many parts of the code.
In the following, the terms "compressor" and "filter" and "codec" are generally
used synonomously.
### Filter-Related Changes:
* In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms.
* Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h.
* Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out.
* Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h.
* Add a number of new test to test the new nczarr filters.
* Let ncgen parse _Codecs attribute, although it is ignored.
### Plugin directory changes:
* Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file
* Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip
* Add a Codec defaulter (see docs/filters.md) for the big four filters.
* Make plugins work with windows by properly adding __declspec declaration.
### Misc. Non-Filter Changes
* Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5.
* Improve support for caching
* More fixes for path conversion code
* Fix misc. memory leaks
* Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath.
* Add a number of new test to test the non-filter fixes.
* Update the parsers
* Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32'
re: Issue https:\\github.com\Unidata\netcdf-c\issues\2060
The path conversion code forgot to consider the case of
windows network paths of the form \\svc\x\y...
I have added support for it, but I can't really test it
since I do not have access to a network drive.
Work in progress / Proof of concept:
Add a capability to disable the tracking of attribute creation order.
See #2054 for details.
This PR adds a `NC_NOATTCREORD` define which can be passed int the
`mode` argument to `nc_create`. If it is present, then the
calls to set the attribute creation order tracking is disabled.
This should only be used for files in which you *know* that the
ordering of the attributes does not matter to *any* potential
readers of this database.
re: https://github.com/zarr-developers/zarr-specs/issues/41
After discussions with the Zarr community, it was decided to
convert to a new representation of the NCZarr meta-data extensions: version 2.
These extensions store information necessary to mapping the Zarr data model
to the netcdf-4 data model.
The basic change is to remove the NCZarr specific objects: .nczarr, .nczgroup, .nczarray, and .nczattr.
The contents of these objects is moved into the corresponding existing Zarr objects as special keys. The mapping is as follows:
* ''.nczarr'' => ''/.zgroup/_NCZARR_SUPERBLOCK_''
* ''.nczgroup => ''.zgroup/_NCZARR_GROUP_''
* ''.nczarray => ''.zarray/_NCZARR_ARRAY_''
* ''.nczattr => ''.zattr/_NCZARR_ATTR_''
Backward compatibility is maintained by looking for the object ''/.nczarr''
and if found, then assuming that the dataset is in the older version 1 format.
This compatibility only supports reading of such version 1 datasets.
Documentation and test cases are also added.
Misc. Other Changes:
1. The json parsing code was added to the general library instead of nczarr only (ncjson.c, ncjson.h).
2. Improved support for different platform paths by allowing conversion
to a single common path representation.
3. Add some new error codes.
4. Modify nccopy usage to mention the new chunking specification.
This is a follow-on to pull request
````https://github.com/Unidata/netcdf-c/pull/1959````,
which fixed up type scoping.
The primary changes are to _nc\_inq\_dimid()_ and to ncdump.
The _nc\_inq\_dimid()_ function is supposed to allow the name to be
and FQN, but this apparently never got implemented. So if was modified
to support FQNs.
The ncdump program is supposed to output fully qualified dimension names
in its generated CDL file under certain conditions.
Suppose ncdump has a netcdf-4 file F with variable V, and V's parent group
is G. For each dimension id D referenced by V, ncdump needs to determine
whether to print its name as a simple name or as a fully qualified name (FQN).
The algorithm is as follows:
1. Search up the tree of ancestor groups.
2. If one of those ancestor groups contains the dimid, then call it dimgrp.
3. If one of those ancestor groups contains a dim with the same name as the dimid, but with a different dimid, then record that as duplicate=true.
4. If dimgrp is defined and duplicate == false, then we do not need an fqn.
5. If dimgrp is defined and duplicate == true, then we do need an fqn to avoid incorrectly using the duplicate.
6. If dimgrp is undefined, then do a preorder breadth-first search of all the groups looking for the dimid.
7. If found, then use the fqn of the first found such dimension location.
8. If not found, then fail.
Test case ncdump/test_scope.sh was modified to test the proper
operation of ncdump and _nc\_inq\_dimid()_.
Misc. Other Changes:
* Fix nc_inq_ncid (NC4_inq_ncid actually) to return root group id if the name argument is NULL.
* Modify _ncdump/printfqn_ to print out a dimid FQN; this supports verification that the resulting .nc files were properly created.
re: Issue https://github.com/Unidata/netcdf-c/issues/1999
NCclosedir code is incorrect. Fix.
Note that this issue crops up when using a non-VisualStudio windows build
such as Mingw because Mingq defines dirent.h, but Visual Studio does not.
Addendum:
Fix some mingw bugs:
1. Modify XGetopt.h to be conditional on _WIN32 instead of _MSC_VER.
2. Make sure sys/stat.h is included in ncpathmgr.h
re: https://github.com/Unidata/netcdf-c/issues/1996
Improve the error message and location that is reported when reading a filter with a variable that uses a filter that is not available on the reading platform.
This requires checking the availability of the filter, recording it, and failing when any attempt is made to read or write that variable. A test case was added for this in tst_filter.sh. Also, LOG level 0 message is generated giving the variable and the filter id.
Note that by design if there is no attempt to read or write the variable, then no error is reported; this means that, for example, ncdump -h will list the filter even though it is not actually available. This is important for allowing a user to see the filter details.
re: https://github.com/Unidata/netcdf-c/issues/1827
The issue is partly resolved by this PR. The proximate problem appears to be that the semantics of mkstemp in **nix is different than the semantics of _mktemp_s in Windows. I had thought they were the same but that is incorrect. The _mktemp_s function will only produce 26 different files and so the netcdf temp file code will fail after about that many iterations.
So, to solve this, I created my own version of mkstemp for windows that uses a random number generator. This appears to solve the reported issue. I also added the testcase ncdap_test/test_manyurls but made it conditional on --enable-dap-long-tests because it is very slow.
I did note that the provided test program now fails after some 800 iterations with a libcurl error claiming it cannot resolve the host name. My belief is that the library is just running out of resources at this point: too many open curl handles or some such. I doubt if this failure is fixable.
So bottom line is that it is really important to do nc_close when you are finished with a file.
Misc. Other Changes:
1. I took the opportunity to clean up some bad string hacks in the code. Specifically
* change all uses of strncat to strlcat
* remove old string hacks: occoncat and occopycat
2. Add heck to see if test.opendap.org is running and if not, then skip test
3. Make CYGWIN use TEMP environment variable
Re: https://github.com/zarr-developers/zarr-python/pull/716
The Zarr version 2 spec has been extended to include the ability
to choose the dimension separator in chunk name keys. The legal
separators has been extended from {'.'} to {'.' '/'}. So now it
is possible to use a key like "0/1/2/0" for chunk names.
This PR implements this for NCZarr. The V2 spec now says that
this separator can be set on a per-variable basis. For now, I
have chosen to allow this be set only globally by adding a key
named "ZARR.DIMENSION_SEPARATOR=<char>" in the
.daprc/.dodsrc/ncrc file. Currently, the only legal separator
characters are '.' (the default) and '/'. On writing, this key
will only be written if its value is different than the default.
This change caused problems because supporting a separator of '/'
is difficult to parse when keys/paths use '/' as the path separator.
A test case was added for this.
Additionally, make nczarr be enabled default by default. This required
some additional changes so that if zip and/or AWS S3 sdk are unavailable,
then they are disabled for NCZarr.
In addition the following unrelated changes were made.
1. Tested that pure-zarr mode could read an nczarr formatted store.
1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added.
1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl
is not found then the other options that depend upon it properly
are disabled.
1. I decided that xarray support should be enabled by default for pure
zarr. In order to allow disabling, I added a new mode flag "noxarray".
1. Certain test in nczarr_test depend on use of .dodsrc. In order for these
to work when testing in parallel, some inter-test dependencies needed to
be added.
1. Improved authorization testing to use changes in thredds.ucar.edu
re: https://github.com/Unidata/netcdf-c/issues/1988
There was an issue with certain shell programs (bash notably).
For certain platforms and when given a url that had an escaped
'#' character (e.g. \\#) bash would not remove the backslash. So I
had to add a hack for this. Unfortunately I overdid it and it
removed all '' characters. This is ok for non-windows platforms,
but obviously fails for windows.
The fix is this.
1. In a utility program (ncgen, ncdump, nccopy, etc) there is probably a call (or calls) to NC_backslashUnescape(xxx) where xxx is a path argument from the command line.
2. Replace each such call with NC_shellUnescape(xxx).
The NC_shellUnescape function was added and searched only for occurrences of "\#" and replaces them with "#".
