NOTE: This PR should not be included in 4.9.1 since additional
DAP4 related PRs will be forthcoming.
This PR makes major changes to libdap4 and dap4_test driven by changes to TDS.
* Enable DAP4
* Clean up the test input files and the test baseline comparison files. This entails:
* Remove a multitude of unused test input and baseline data files; among them are dap4_test/: daptestfiles, dmrtestfiles, nctestfiles, and misctestfiles.
* Define a canonical set of test input files and record in dap4_test/cdltestfiles.
* Use the cdltestfiles to generate the .nc test inputs. This set of .nc files is then moved to the d4ts (DAP4 test server) war file in the tds repository. This set then becomes the canonical set of DAP4 test sources.
* Scrape d4ts to obtain copies of the raw streams of DAP4 encoded data. The .dmr and .dap streams are then stored in dap4_test/rawtestfiles.
* Disable some remote server tests until those servers are fixed.
* Add an option to ncdump (-XF) that forces the type of the _FillValue attribute; this is primarily to simplify testing of fill mismatch.
* Minor bug fixes to ncgen.
* Changes to libdap4:
* Replace old checksum hack with the dap4.checksum flag.
* Support the dap4.XXX controls.
* Cleanup _FillValue handling, especially var-attribute type mismatches.
* Fix enum handling based on changes to netcdf-java.
* Changes to dap4_test:
* Add getopt support to various test support programs.
* Remove unneeded shell scripts.
* Add new scripts: test_curlopt.sh
re: PR https://github.com/Unidata/netcdf-c/pull/2088
re: PR https://github.com/Unidata/netcdf-c/pull/2130
replaces: https://github.com/Unidata/netcdf-c/pull/2140
Changes:
* Add NCZarr-specific quantize functions to the dispatch table.
* Copy (modified) quantize code from libhdf5 to NCZarr
* Add quantize invocation to zvar.c
* Add support for _QuantizeBitgroomNumberOfSignificantDigits
and _QuantizeGranularBitgroomNumberOfSignificantDigits to ncgen.
* Modify nc_test4/tst_quantize.c to allow it to be used both for hdf5
and for nczarr.
* Make dap4 properly handle quantize functions in dispatch table.
* Add quantize attribute support to ncgen.
Other changes:
* Caught and fixed some S3 problems
* Fixed some nczarr fillvalue problems.
* Fixed some nczarr cache problems.
* Cleanup some flaws in libdispatch/dinfermodel.c
* Allow byterange requests to S3 be readable by dinfermodel.c/check_file_type
* Remove the libnczarr ztracedispatch code (big change).
re: https://github.com/Unidata/netcdf-c/issues/541
re: https://github.com/Unidata/netcdf-c/issues/1208
re: https://github.com/Unidata/netcdf-c/issues/2078
re: https://github.com/Unidata/netcdf-c/issues/2041
re: https://github.com/Unidata/netcdf-c/issues/2143
For a long time, there have been known problems with the
management of complex types containing VLENs. This also
involves the string type because it is stored as a VLEN of
chars.
This PR (mostly) fixes this problem. But note that it adds new
functions to netcdf.h (see below) and this may require bumping
the .so number. These new functions can be removed, if desired,
in favor of functions in netcdf_aux.h, but netcdf.h seems the
better place for them because they are intended as alternatives
to the nc_free_vlen and nc_free_string functions already in
netcdf.h.
The term complex type refers to any type that directly or
transitively references a VLEN type. So an array of VLENS, a
compound with a VLEN field, and so on.
In order to properly handle instances of these complex types, it
is necessary to have function that can recursively walk
instances of such types to perform various actions on them. The
term "deep" is also used to mean recursive.
At the moment, the two operations needed by the netcdf library are:
* free'ing an instance of the complex type
* copying an instance of the complex type.
The current library does only shallow free and shallow copy of
complex types. This means that only the top level is properly
free'd or copied, but deep internal blocks in the instance are
not touched.
Note that the term "vector" will be used to mean a contiguous (in
memory) sequence of instances of some type. Given an array with,
say, dimensions 2 X 3 X 4, this will be stored in memory as a
vector of length 2*3*4=24 instances.
The use cases are primarily these.
## nc_get_vars
Suppose one is reading a vector of instances using nc_get_vars
(or nc_get_vara or nc_get_var, etc.). These functions will
return the vector in the top-level memory provided. All
interior blocks (form nested VLEN or strings) will have been
dynamically allocated.
After using this vector of instances, it is necessary to free
(aka reclaim) the dynamically allocated memory, otherwise a
memory leak occurs. So, the recursive reclaim function is used
to walk the returned instance vector and do a deep reclaim of
the data.
Currently functions are defined in netcdf.h that are supposed to
handle this: nc_free_vlen(), nc_free_vlens(), and
nc_free_string(). Unfortunately, these functions only do a
shallow free, so deeply nested instances are not properly
handled by them.
Note that internally, the provided data is immediately written so
there is no need to copy it. But the caller may need to reclaim the
data it passed into the function.
## nc_put_att
Suppose one is writing a vector of instances as the data of an attribute
using, say, nc_put_att.
Internally, the incoming attribute data must be copied and stored
so that changes/reclamation of the input data will not affect
the attribute.
Again, the code inside the netcdf library does only shallow copying
rather than deep copy. As a result, one sees effects such as described
in Github Issue https://github.com/Unidata/netcdf-c/issues/2143.
Also, after defining the attribute, it may be necessary for the user
to free the data that was provided as input to nc_put_att().
## nc_get_att
Suppose one is reading a vector of instances as the data of an attribute
using, say, nc_get_att.
Internally, the existing attribute data must be copied and returned
to the caller, and the caller is responsible for reclaiming
the returned data.
Again, the code inside the netcdf library does only shallow copying
rather than deep copy. So this can lead to memory leaks and errors
because the deep data is shared between the library and the user.
# Solution
The solution is to build properly recursive reclaim and copy
functions and use those as needed.
These recursive functions are defined in libdispatch/dinstance.c
and their signatures are defined in include/netcdf.h.
For back compatibility, corresponding "ncaux_XXX" functions
are defined in include/netcdf_aux.h.
````
int nc_reclaim_data(int ncid, nc_type xtypeid, void* memory, size_t count);
int nc_reclaim_data_all(int ncid, nc_type xtypeid, void* memory, size_t count);
int nc_copy_data(int ncid, nc_type xtypeid, const void* memory, size_t count, void* copy);
int nc_copy_data_all(int ncid, nc_type xtypeid, const void* memory, size_t count, void** copyp);
````
There are two variants. The first two, nc_reclaim_data() and
nc_copy_data(), assume the top-level vector is managed by the
caller. For reclaim, this is so the user can use, for example, a
statically allocated vector. For copy, it assumes the user
provides the space into which the copy is stored.
The second two, nc_reclaim_data_all() and
nc_copy_data_all(), allows the functions to manage the
top-level. So for nc_reclaim_data_all, the top level is
assumed to be dynamically allocated and will be free'd by
nc_reclaim_data_all(). The nc_copy_data_all() function
will allocate the top level and return a pointer to it to the
user. The user can later pass that pointer to
nc_reclaim_data_all() to reclaim the instance(s).
# Internal Changes
The netcdf-c library internals are changed to use the proper
reclaim and copy functions. It turns out that the places where
these functions are needed is quite pervasive in the netcdf-c
library code. Using these functions also allows some
simplification of the code since the stdata and vldata fields of
NC_ATT_INFO are no longer needed. Currently this is commented
out using the SEPDATA \#define macro. When any bugs are largely
fixed, all this code will be removed.
# Known Bugs
1. There is still one known failure that has not been solved.
All the failures revolve around some variant of this .cdl file.
The proximate cause of failure is the use of a VLEN FillValue.
````
netcdf x {
types:
float(*) row_of_floats ;
dimensions:
m = 5 ;
variables:
row_of_floats ragged_array(m) ;
row_of_floats ragged_array:_FillValue = {-999} ;
data:
ragged_array = {10, 11, 12, 13, 14}, {20, 21, 22, 23}, {30, 31, 32},
{40, 41}, _ ;
}
````
When a solution is found, I will either add it to this PR or post a new PR.
# Related Changes
* Mark nc_free_vlen(s) as deprecated in favor of ncaux_reclaim_data.
* Remove the --enable-unfixed-memory-leaks option.
* Remove the NC_VLENS_NOTEST code that suppresses some vlen tests.
* Document this change in docs/internal.md
* Disable the tst_vlen_data test in ncdump/tst_nccopy4.sh.
* Mark types as fixed size or not (transitively) to optimize the reclaim
and copy functions.
# Misc. Changes
* Make Doxygen process libdispatch/daux.c
* Make sure the NC_ATT_INFO_T.container field is set.
re:
The current netcdf-c release has some problems with the mingw platform
on windows. Mostly they are path issues.
Changes to support mingw+msys2:
-------------------------------
* Enable option of looking into the windows registry to find
the mingw root path. In aid of proper path handling.
* Add mingw+msys as a specific platform in configure.ac and move testing
of the platform to the front so it is available early.
* Handle mingw X libncpoco (dynamic loader) properly even though
mingw does not yet support it.
* Handle mingw X plugins properly even though mingw does not yet support it.
* Alias pwd='pwd -W' to better handle paths in shell scripts.
* Plus a number of other minor compile irritations.
* Disallow the use of multiple nc_open's on the same file for windows
(and mingw) because windows does not seem to handle these properly.
Not sure why we did not catch this earlier.
* Add mountpoint info to dpathmgr.c to help support mingw.
* Cleanup dpathmgr conversions.
Known problems:
---------------
* I have not been able to get shared libraries to work, so
plugins/filters must be disabled.
* There is some kind of problem with libcurl that I have not solved,
so all uses of libcurl (currently DAP+Byterange) must be disabled.
Misc. other fixes:
------------------
* Cleanup the relationship between ENABLE_PLUGINS and various other flags
in CMakeLists.txt and configure.ac.
* Re-arrange the TESTDIRS order in Makefile.am.
* Add pseudo-breakpoint to nclog.[ch] for debugging.
* Improve the documentation of the path manager code in ncpathmgr.h
* Add better support for relative paths in dpathmgr.c
* Default the mode args to NCfopen to include "b" (binary) for windows.
* Add optional debugging output in various places.
* Make sure that everything builds with plugins disabled.
* Fix numerous (s)printf inconsistencies betweenb the format spec
and the arguments.
Filter support has three goals:
1. Use the existing HDF5 filter implementations,
2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr,
3. Allow filters to be used even when HDF5 is disabled
Detailed usage directions are define in docs/filters.md.
For now, the existing filter API is left in place. So filters
are defined using ''nc_def_var_filter'' using the HDF5 style
where the id and parameters are unsigned integers.
This is a big change since filters affect many parts of the code.
In the following, the terms "compressor" and "filter" and "codec" are generally
used synonomously.
### Filter-Related Changes:
* In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms.
* Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h.
* Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out.
* Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h.
* Add a number of new test to test the new nczarr filters.
* Let ncgen parse _Codecs attribute, although it is ignored.
### Plugin directory changes:
* Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file
* Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip
* Add a Codec defaulter (see docs/filters.md) for the big four filters.
* Make plugins work with windows by properly adding __declspec declaration.
### Misc. Non-Filter Changes
* Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5.
* Improve support for caching
* More fixes for path conversion code
* Fix misc. memory leaks
* Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath.
* Add a number of new test to test the non-filter fixes.
* Update the parsers
* Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32'
re: https://github.com/Unidata/netcdf-c/issues/1977
PR https://github.com/Unidata/netcdf-c/pull/1753, changed ncgen
to allows certain type names to be used as identifiers in
selected situations.
An unwanted side effect was that existing type aliases no longer
were accepted by ncgen. Specifically, using the "long" type
caused an error.
I was able to figure out a better solution to the original
problem (https://github.com/Unidata/netcdf-c/issues/1750)
that also fixes this problem as well.
This PR fixes that problem in ncgen/ncgen.l,
and adds tests to ncdump/test_keywords.sh
re: https://github.com/Unidata/netcdf-c/issues/1836
Revert the internal filter code to simplify it. From the user's
point of view, the only visible changes should be:
1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h
2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter.
Internally,the dispatch table has been modified to get rid of the filter_actions
entry and associated complex structures. It has been replaced with
inq_var_filter_ids and inq_var_filter_info entries and the dispatch table
version has been bumped to 3. Corresponding NOOP and NOTNC4 functions
were added to libdispatch/dnotnc4.c. Also, the filter_action entries
in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2,
etc). This should only impact UDF users.
In the process, it became clear that the form of the filters
field in NC_VAR_INFO_T was format dependent, so I converted it to
be of type void* and pushed its management into the various dispatch
code bases. Specifically libhdf5 and libnczarr now manage the filters
field in their own way.
The auxilliary functions for parsing textual filter specifications
were moved to netcdf_aux.h and were renamed to the following:
* ncaux_h5filterspec_parse
* ncaux_h5filterspec_parselist
* ncaux_h5filterspec_free
* ncaux_h5filter_fix8
Misc. Other Changes:
1. Document NUG/filters.md updated to reflect the changes above.
2. All the old data types (structs and enums)
used by filter_actions actions were deleted.
The exception is the NC_H5_Filterspec because it is needed
by ncaux_h5filterspec_parselist.
3. Clientside filters were removed -- another enhancement
for which no-one ever asked.
4. The ability to remove filters was itself removed.
5. Some functionality needed by nczarr was moved from libhdf5
to libsrc4 e.g. nc4_find_default_chunksizes
6. All the filterx code was removed
7. ncfilter.h and nc4filter.c no longer used
Misc. Unrelated Changes:
1. The nczarr_test makefile clean was leaving some directories; so
add clean-local to take care of them.
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
Built-in type-name keywords are currently flagged when used as
identifiers in formats that do not support that type. So if a
user declares a dimension named "string" in a classic .cdl file,
it causes an error.
This PR modifies ncgen to allow those format-specific type keywords
to be used as identifiers when compiling to formats that do not
support that type. Also added a test for this.
Also a couple of misc. changes to conditionalize some debug output.
re: https://github.com/Unidata/netcdf-c/issues/1642
Modify ncdump, nccopy, and ncgen to support the NC_COMPACT storage option.
Added test cases and added description to the man pages for the utilities.
1. ncdump: For compact storage variable, print special attribute __Storage_ as
````
<var>: _Storage = "compact";
````
2. ncgen: parse and implement
````
<var>: _Storage = "compact";
````
in a .cdl file
3. nccopy: Extend the chunk specification (-c flag) to support
compact using the forms
````
nccopy ... -c <var>:compact
and
nccopy ... -c <var>:contiguous
````
Misc. other changes
1. cleanup the copy_chunking function in ncdump/nccopy.c
re: https://github.com/Unidata/netcdf-c/issues/1584
Support has been added for multiple filters per variable. This
affects a number of components in netcdf. The new APIs are
documented in NUG/filters.md.
The primary changes are:
* A set of new functions are provided (see __include/netcdf_filter.h__).
- Obtain a list of the filters associated with a variable
- Obtain the parameters for a specific filter.
* The existing __nc_inq_var_filter__ function now returns info
about the first defined filter.
* The utilities (ncgen, ncdump, and nccopy) now support
an extended format for specifying a sequence of filters.
The general form is __<filter>|<filter>..._.
* The ncdump **_Filter** attribute now dumps a list of all the
filters associated with a variable using the above new format.
* Filter specifications can now use a filter name instead of number
for filters known to the netcdf library, which in turn is taken
from the HDF5 filter registration page.
* New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter
is returned if an attempt is made to access an unknown filter.
* Internally, the dispatch table has been extended to add a function
to handle all of the filter functions.
* New, filter-related, tests were added to nc_test4.
* A new plugin was added to the plugins directory to help with testing.
Notes:
1. The shuffle and fletcher32 filters are not part of the multifilter system.
Misc. changes:
1. A debug module was added to libhdf5 to help catch error locations.
re: issue https://github.com/Unidata/netcdf-c/issues/1278
re: issue https://github.com/Unidata/netcdf-c/issues/876
re: issue https://github.com/Unidata/netcdf-c/issues/806
* Major change to the handling of 8-byte parameters for nc_def_var_filter.
The old code was not well thought out.
* The new algorithm is documented in docs/filters.md.
* Added new utility file plugins/H5Zutil.c to support
* Modified plugins/H5Zmisc.c to use new algorithm
the new algorithm.
* Renamed include/ncfilter.h to include/netcdf_filter.h
and made it an installed header so clients can access the
new algorithm utility.
* Fixed nc_test4/tst_filterparser.c and nc_test4/test_filter_misc.c
to use the new algorithm
* libdap4/ fixes:
* d4swap.c has an error in the endian pre-processing such
that record counts were not being swapped correctly.
* d4data.c had an error in that checksums were being computed
after endian swapping rather than before.
* ocinitialize() was never being called, so xxdr bigendian handling
was never set correctly.
* Required adding debug statements to occompile
* Found and fixed memory leak in ncdump.c
Not tested:
* HDF4
* Pnetcdf
* parallel HDF5
This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173
Sorry that it is so big, but leak suppression can be complex.
This PR fixes all remaining memory leaks -- as determined by
-fsanitize=address, and with the exceptions noted below.
Unfortunately. there remains a significant leak that I cannot
solve. It involves vlens, and it is unclear if the leak is
occurring in the netcdf-c library or the HDF5 library.
I have added a check_PROGRAM to the ncdump directory to show the
problem. The program is called tst_vlen_demo.c To exercise it,
build the netcdf library with -fsanitize=address enabled. Then
go into ncdump and do a "make clean check". This should build
tst_vlen_demo without actually executing it. Then do the
command "./tst_vlen_demo" to see the output of the memory
checker. Note the the lost malloc is deep in the HDF5 library
(in H5Tvlen.c).
I am temporarily working around this error in the following way.
1. I modified several test scripts to not execute known vlen tests
that fail as described above.
2. Added an environment variable called NC_VLEN_NOTEST.
If set, then those specific tests are suppressed.
This should mean that the --disable-utilities option to
./configure should not need to be set to get a memory leak clean
build. This should allow for detection of any new leaks.
Note: I used an environment variable rather than a ./configure
option to control the vlen tests. This is because it is
temporary (I hope) and because it is a bit tricky for shell
scripts to access ./configure options.
Finally, as before, this only been tested with netcdf-4 and hdf5 support.
(I hope) metadata mechanism. This mostly just adds new pieces of
code (e.g. nclistmap) and does some minor fixes.
It should be transparent to everything else.
The next set of changes will be the big step.
2. Fixed plugin building (nc_test4/hdf5plugins)
to be done properly by cmake and automake.
4. Duplicated part of the nc_test4 filter test code
in examples/C
An incomplete and untested set of hooks exist
for OS-X in nc_test4/findplugins.in. They need testing.
2. Factored out the parameter string parsing for ncgen and nccopy
int libdispatch/dfilter.c + include/ncfilter.h
3. Allow a parameter string to use constant types other than
unsigned int. See docs/filters.md for details.
4. Moved the old content of include/netcdf_filter.h into include/netcdf.h
and removed include/netcdf_filter.h as no longer needed.
5. Force the test filter (bzip2) in nc_test4/filter_test to
be built using BUILT_SOURCES.
it tries to infer the file kind based on
the constructs and types used in the .cdl
file. Previously, it included cdf5 as an
inferrable kind, but this is almost never
what is wanted. So limit inferable kinds
to netcdf classic vs netcdf enhanced.
Also fix tst_inttags4.sh test.
1. Allow nccopy to apply filters, especially on the output file.
This provides a third way to do this other than using ncgen or
programatically
2. Make sure that even if the filter code is not available, it is
possible to see the filter id and parameters for variables using
e.g ncdump -hs.
3. Fix bug in nccopy so that the input file does
not necessarily have to be netcdf-4.
4. At last minute decided to change to using a
single "_Filter" attribute for ncgen
5. Added a test to tst_filter.sh to generate C code using ncgen.
This relies on the HDF5 capability to
dynamically load compression filters.
Note that a compression filter is just
a subcase of filters.
The primary user-visible changes are as follows:
1. Add a standard header "netcdf_filter.h" that defines
the necessary API extensions
2. Modify ncgen to support two new special attributes
"_Filter_ID" and "_Filter_Parameters" so that compression
can be turned on when creating a file using ncgen.
4. Add a detailed description of filtering support
to the user's guide; see the file filters.md
5. Add a test case directory for this: nc_test4/filter_test.
It is fragile and a ./configure flags (-enable-filter-test)
is defined (default disabled) to shut this off this test
to avoid spurious 'make check' failures.
Note that the HDF5 documentation is not up-to-date, so
much of what is encoded here comes from examining the
actual code in the file H5PL.c in the HDF5 source code.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
is somehow in interference with something
in the HDF4 code. So, I changed
the OPAQUE -> OPAQUE_ and that appears
to fix the problem with bison when HDF4
is enabled.
ps. when Visual Studio complained about token
'constant' it turn out that it mean token type,
not the actual token named 'constant'. Instead
the actual token that was causing the problem
was 'OPAQUE'.
This consists of a persistent attribute named
_NCProperties plus two computed attributes
_IsNetcdf4 and _SuperblockVersion.
See the 'Provenance Attributes' section
of docs/attribute_conventions.md for details.
NetCDF-c Github issue #185
The code in libsrc/dim.c has not been upgraded to support
CDF-5 format.
Rule we are implementing sets the max dimension sizes as follows:
Classic: CDF-1 NC_MAX_INT - 3 = 2147483647 - 3
64 bit Offset: CDF-2 NC_MAX_UINT - 3 = 4294967295 - 3
64 bit Data: CDF-5 NC_MAX_UINT64 - 3 = 18446744073709551615 - 3
The -3 is to handle rounding.
that were not taking the CDF-5 format into account.
2. Had to update ncgen.1 man page to define the new
k-flag rules to deal with cdf-5.
3. Had to fix some tests that use 'cmp' for comparison;
this really should be deprecated.
3. There was a bug in configure.ac with respect
to using the enable-netcdf-4 flag vs
using disable-netcdf-4.
should be under ENABLE_DAP_REMOTE_TESTS.
Fixed to make sure that this is so.
Also attempted to fix ncdap_test/CMakeLists.txt,
but probably got it wrong.
HT to Nico Schlomer.
2. Attempted to reduce the number of conversion errors
when -Wconversion is set. Fixed oc2, but
rest of netcdf remains to be done.
HT to Nico Schlomer.
3. When doing #2, I discovered an error in ncgen.y
that has remained hidden. This required some other
test case fixes.
error occurs after an "exit:" label.
Corrected a dozen Coverity errors (mainly allocation issues, along with a few
other things):
711711, 711802, 711803, 711905, 970825, 996123, 996124, 1025787,
1047274, 1130013, 1130014, 1139538
Refactored internal fill-value code to correctly handle string types, and
especially to allow NULL pointers and null strings (ie. "") to be
distinguished. The code now avoids partially aliasing the two together
(which only happened on the 'write' side of things and wasn't reflected on
the 'read' side, adding to the previous confusion).
Probably still weak on handling fill-values of variable-length and compound
datatypes.
Refactored the recursive metadata reads a bit more, to process HDF5 named
datatypes and datasets immediately, avoiding chewing up memory for those
types of objects, etc.
Finished uncommenting and updating the nc_test4/tst_fills2.c code (as I'm
proceeding alphabetically through the nc_test4 code files).
to clean up resources properly on failure.
Refactored doubly-linked list code for objects in the libsrc4 directory,
cleaning up the add/del routines, breaking out the common next/prev
pointers into a struct and extracting the add/del operations on them,
changed the list of dims to add new dims in the same order as the other
types, made all add routines able to optionally return a pointer to the
newly created object.
Removed some dead code (pg_var(), nc4_pg_var1(), nc4_pg_varm(), misc. small
routines, etc)
Fixed fill value handling for string types in nc4_get_vara().
Changed many malloc()+strcpy() pairs into calls to strdup().
Cleaned up misc. other minor Coverity issues.
Columbia server does not serve up proper
opendap DDS replies. The Dataset {...} name
changes depending on if the request has certain
kinds of constraints.
Code for a hack was not being used, so restore it.
The fix is to effectively ignore differences in
Dataset node names if the code is coming from
columbia.edu.
2. [NCF-278]
The ncgen code is improperly typing int64 integer constants
as uint64.
3. [NCF-279]
Empty string constants were not being properly
filled when their target array is length 1 or more.
Ncgen is unable to resolve
ambiguous references to an enum
constant when two different enums
have same econstant name.
Solved by allowing more specific
forms for econstant references.
1. /.../enumname.enumconstname
2. enumname.enumconstname
3. enumconstname
Case 1 is resolved by using the econstant
in the specific enum definition. If none is
found, an error is reported.
Case 2 is resolved by
1. finding an enclosing group with an
enum definition with the specified name
and containing the specified econstant.
If there are more than one, then an error is reported
2. finding all enum definitions in the dataset that have
the specified enum name and contain the specified
econstant. If more than one is found, then an error is reported.
If the above two methods fail, then report an error.
Case 3 is similar to case 2, but all enums, irrespective
of name are used if they contains the specified enum constant.
The ref_tst_econst.cdl test in ncdump is causing ncdump
to fail. So there may be yet some problem.
