re: github issue #1425
The 'ncdump -v' command causes a constraint to be sent
to the opendap code (in libdap2). This is a separate path
from specifying the constraint via a URL.
This separate path encoded its constraint using code independent
of and duplicative of that provided by ncuri.c and this duplicate
code did not properly encode the constraint, which might include
square brackets.
Solution chosen here was to get rid of the duplicate code and
ensure that all URL escaping is performed in the ncuribuild function
in the ncuri.c file.
Also removed the use of the NEWESCAPE conditional in ncuri.c
because it is no longer needed.
re: https://github.com/Unidata/netcdf-c/issues/1388
1. Centralize calls to curl_global_init and curl_global_cleanup
to libdispatch/ddispatch.c
2. Make the above calls if options require curl: currently
any of DAP2, DAP4, or byterange.
3. Side issue: Fix obscure bug in mmapio.c involving non-persistent mmap.
re: https://github.com/Unidata/netcdf-c/issues/1373 (partial)
* Mark some global constants be const to indicate to make them easier to track.
* Hide direct access to the ncrc_globalstate behind a function call.
* Convert dispatch tables to constants (except the user defined ones)
This has some consequences in terms of function arguments needing to be marked
as const also.
* Remove some no longer needed global fields
* Aggregate all the globals in nclog.c
* Uniformly replace nc_sizevector{0,1} with NC_coord_{zero,one}
* Uniformly replace nc_ptrdffvector1 with NC_stride_one
* Remove some obsolete code
re: issue https://github.com/Unidata/netcdf-c/issues/1316
The DAP2 data model does not have a signed byte type,
but netcdf-3 does have (only) a signed byte type.
So, when converting a netcdf-3 signed byte typed variable to
a DAP2 unsigned byte, the following actions are taken by thredds:
1. The variable type is marked as DAP2 (unsigned) byte.
2. A special attribute, "_Unsigned=false" is set for the variable
3. The corresponding "_FillValue" attribute, if any, is up-converted
to the DAP2 Int16 type in order to hold, with sign, any signed byte
fill value.
On the netcdf-c side, this looks like a fillvalue type mismatch and causes
an error. Instead, the netcdf-c dap2 conversion code needs to recognize
this hack and undo it locally.
So this change looks for the above case, and if found, then it properly
converts the _FillValue type to netcdf-3 signed byte.
Since DAP2 supports both signed and unsigned integers of sizes 16 and 32 bits,
this should be the only hack needed (famous last words).
It may later be desirable for the thredds DAP2 converter to modify its
behavior as well.
re: issue https://github.com/Unidata/netcdf-c/issues/1278
re: issue https://github.com/Unidata/netcdf-c/issues/876
re: issue https://github.com/Unidata/netcdf-c/issues/806
* Major change to the handling of 8-byte parameters for nc_def_var_filter.
The old code was not well thought out.
* The new algorithm is documented in docs/filters.md.
* Added new utility file plugins/H5Zutil.c to support
* Modified plugins/H5Zmisc.c to use new algorithm
the new algorithm.
* Renamed include/ncfilter.h to include/netcdf_filter.h
and made it an installed header so clients can access the
new algorithm utility.
* Fixed nc_test4/tst_filterparser.c and nc_test4/test_filter_misc.c
to use the new algorithm
* libdap4/ fixes:
* d4swap.c has an error in the endian pre-processing such
that record counts were not being swapped correctly.
* d4data.c had an error in that checksums were being computed
after endian swapping rather than before.
* ocinitialize() was never being called, so xxdr bigendian handling
was never set correctly.
* Required adding debug statements to occompile
* Found and fixed memory leak in ncdump.c
Not tested:
* HDF4
* Pnetcdf
* parallel HDF5
Primary fixes to get -ansi to work.
1. Convert all '//' C++ style comments to /*...*/ or to use #if 0...#endif
2. It turns out that when -ansi is specified, then a number of
functions no longer are defined in the header -- but they are still
in the .so file.<br>
The big example is strdup(). So, added code to include/ncconfig.h to define
externs for those missing functions that occur in more than one place.
These are enabled if !_WIN32 && __STDC__ == 1 (__STDC__ is supposed to
be the equivalent compile time flag to -ansi). Note that this requires
config.h (which references ncconfig.h) to be included in files where it is
currently not included. Single uses will be only in the file that uses them.
3. Added mmap test for the MAP_ANONYMOUS flag to configure.ac. Apparently
this is not always defined with -ansi.
4. fix some large integer constants in nc_test4/tst_atts3.c and nc_test4/tst_filterparser.c
to avoid compiler complaints.
5. fix a double constant in nc_test4/tst_filterparser.c to avoid compiler complaints.
[Note I suspect #4 and #5 will be a problem on big-endian machines, but we have no way to test]
Misc. Changes:
1. convert more instances of _MSC_VER to _WIN32.
2. added some debugging code to include/nctestserver.h
3. added comment about libdispatch/drc.c always being compiled.
4. modify parser generation in ncgen to remove unneeded files.
https://github.com/Unidata/netcdf-c/issues/1168https://github.com/Unidata/netcdf-c/issues/1163https://github.com/Unidata/netcdf-c/issues/1162
This PR partially fixes memory leaks in the netcdf-c library,
in the ncdump utility, and in some test cases.
The netcdf-c library now runs memory clean with the assumption
that the --disable-utilities option is used. The primary remaining
problem is ncgen. Once that is fixed, I believe the netcdf-c library
will run memory clean with no limitations.
Notes
-----------
1. Memory checking was performed using gcc -fsanitize=address.
Valgrind-based testing has yet to be performed.
2. The pnetcdf, hdf4, and examples code has not been tested.
Misc. Non-leak changes
1. Make tst_diskless2 only run when netcdf4 is enabled (issue 1162)
2. Fix CmakeLists.txt to turn off logging if ENABLE_NETCDF_4 is OFF
3. Isolated all my debug scripts into a single top-level directory
called debug
4. Fix some USE_NETCDF4 dependencies in nc_test and nc_test4 Makefile.am
re: issue https://github.com/Unidata/netcdf-c/issues/1151
Modify DAP2 and DAP4 code to handle case when _FillValue type is not
same as the parent variable type.
Specifically:
1. Define a parameter [fillmismatch] to allow this mismatch;
default is to disallow.
2. If allowed, forcibly change the type of the _FillValue to match
the parent variable.
3. If allowed Convert the values to match new type
4. Generate a log message
5. if not allowed, then fail
Implementing this required some changes to ncdap_test/dapcvt.c
Also added test cases.
Minor Unrelated Changes:
1. There were a number of warnings about e.g.
assigning a const char* to a char*. Fix these
2. In nccopy.1, replace .NP with .IP "n"
(re PR https://github.com/Unidata/netcdf-c/pull/1144)
3. fix minor error in ncdump/ocprint
re: github issue https://github.com/Unidata/netcdf-c/issues/1111
One of the less common use cases for the in-memory feature is
apparently failing with HDF5-1.10.x. The fix is complicated and
requires significant changes to libhdf5/nc4memcb.c. The current
setup is detailed in the file docs/inmeminternal.dox.
Additionally, it was discovered that the program
nc_test/tst_inmemory.c, which is invoked by
nc_test/run_inmemory.sh, actually was failing because of the
above problem. But the failure is not detected since the script
does not return non-zero value.
Other Changes:
1. Fix nc_test_tst_inmemory to return errors correctly.
2. Make ncdap_tests/findtestserver.c and dap4_tests/findtestserver4.c
be generated from ncdap_test/findtestserver.c.in.
3. Make LOG() print output to stderr instead of stdout to
avoid contaminating e.g. ncdump output.
4. Modify the handling of NC_INMEMORY and NC_DISKLESS flags
to properly handle that NC_DISKLESS => NC_INMEMORY. This
affects a number of code pieces, especially memio.c.
Add the ability to set some additional curlopt values via .daprc (aka .dodsrc).
This effects both DAP2 and DAP4 protocols.
Related issues:
[1] re: esupport: KOZ-821332
[2] re: github issue https://github.com/Unidata/netcdf4-python/issues/836
[3] re: github issue https://github.com/Unidata/netcdf-c/issues/1074
1. CURLOPT_BUFFERSIZE: Relevant to [1]. Allow user to set the read/write
buffersizes used by curl.
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.READ.BUFFERSIZE=n
where n is the buffersize in bytes. There is a built-in (to curl)
limit of 512k for this value.
2. CURLOPT_TCP_KEEPALIVE (and CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL):
Relevant (maybe) to [2] and [3]. Allow the user to turn on KEEPALIVE
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.KEEPALIVE=on|n/m
If the value is "on", then simply enable default KEEPALIVE. If the value
is n/m, then enable KEEPALIVE and set KEEPIDLE to n and KEEPINTVL to m.
strlcat provides better protection against buffer overflows.
Code is taken from the FreeBSD project source code. Specifically:
https://github.com/freebsd/freebsd/blob/master/lib/libc/string/strlcat.c
License appears to be acceptable, but needs to be checked by e.g. Debian.
Step 1:
1. Add to netcdf-c/include/ncconfigure.h to use our version
if not already available as determined by HAVE_STRLCAT in config.h.
2. Add the strlcat code to libdispatch/dstring.c
3. Turns out that strlcat was already defined in several places.
So remove it from:
ncgen3/genlib.c
ncdump/dumplib.c
3. Define strlcat extern definition in ncconfigure.h.
4. Modify following directories to use strlcat:
libdap2 libdap4 ncdap_test dap4_test
Will do others in subsequent steps.
Serious bad on my part. For some reason, I changed the set of
characters allowed n a DAP name. In particular, characters that
are legal according to the DAP spec were removed. So when one of
this removed characters was encountered, it produced a parse
error.
In this case, the offending character was a single quote character in the name:
Blackadar's_mixing_length_scale_hybrid
The reason it worked for java is because the escape character set
is correct and different than the one in the netcdf-c dap code.
url parameter handling, the parameter
lookup code was ignoring parameters
because I was giving it a url stripped
of parameters instead of the one with
parameters.
This code change fixes the parameter processing
so it again used the correct url.
reference:
docs/OPeNDAP.dox#section Defined Client Parameters
The use of the following version-specific curl flags
is not always properly wrapped or aliased using
config.h HAVE_CURL... ifdefs.
# CURLOPT_USERNAME is not defined until curl version 7.19.1
# CURLOPT_PASSWORD is not defined until curl version 7.19.1
# CURLOPT_KEYPASSWD is not defined until curl version 7.16.4
-- aliased as needed to CURLOPT_SSLKEYPASSWD
# CURLINFO_RESPONSE_CODE is not defined until curl version 7.10.7
-- aliased as needed to CURLINFO_HTTP_CODE
# CURLOPT_CHUNK_BGN_FUNCTION is not defined until curl version 7.21.0
-- not used in our code
v4.5-release-candidate branch and master branch ASAP.
The bug occurs in d4rc.c where strcmp is being applied to NULL.
Also, the code in which it occurs is debugging code, so it needs
to be #ifdef'd. This fix may cause minor conflicts with other
outstanding pull requests that fix the same bug. But the
conflicts should be minor and easy to resolve.
Primary change is to cleanup code and remove duplicated code.
1. Unify the rc file reading into libdispatch/drc.c. Eventually extend
if we need rc file for netcdf itself as opposed to the dap code.
2. Unify the extraction from the rc file of DAP authorization info.
3. Misc. other small unifications: make temp file, read file.
4. Avoid use of libcurl when reading file:// because
there is some kind of problem with the Visual Studio version.
Might be related to the winpath problem.
In any case, do direct read instead.
5. Add new error code NC_ERCFILE for errors in reading RC file.
6. Complete documentation cleanup as indicated in this comment
https://github.com/Unidata/netcdf-c/pull/472#issuecomment-325926426
7. Convert some occurrences of #ifdef _WIN32 to #ifdef _MSC_VER
generates garbage. This in turn interferes with using .netrc
because the garbage user+pwd can will override the
.netrc. Note that this may work ok sometimes
if the garbage happens to start with a nul character.
2. It turns out that the user:pwd combination needs to support
character escaping. One reason is the user may contain an '@' character.
The other is that modern password rules make it not unlikely that
the password will contain characters that interfere with url parsing.
So, the rule I have implemented is that all occurrences of the user:pwd
format must escape any dodgy characters. The escape format is URL escaping
of the form %XX. This applies both to user:pwd
embedded in a URL as well as the use of HTTP.CREDENTIALS.USERPASSWORD
in a .dodsrc/.daprc file. The user and password in .netrc must not
be escaped. This is now documented in docs/auth.md
The fix for #2 actually obviated #1. Now, internally, the user and pwd
are stored separately and not in the user:pwd format. They are combined
(and escaped) only when needed.
where a null user+pwd generates
garbage. This in turn interferes
with using .netrc because the garbage
user+pwd can (sometimes) override
the .netrc.
Not entirely sure what is going on
because it works as is under e.g. cygwin.
In any case it needs fixing.
were added to provide a path name converter from e.g. cygwin
paths to e.g. windows paths. This is necessary because
the shell scripts may produce cygwin paths, but the code
may have been compiled with Visual Studio. Similar issues
arise with Mingw.
At appropriate places, and if using Visual Studio or Mingw,
I added calls to the path conversion code.
Apparently I forgot to find all the places where this
conversion was needed. So this pr does the following:
1. Push the calls to the converter to the various libXXX
directories and out of libdispatch/dfile.c.
2. Add conversion calls to other parts of the code like oc2.
I also turns out that conversion code in dapcvt.c
had a bug when handling DAP Byte type under visual studio.
Notes:
1. there may still be places I missed that need to do path conversion.
2. need to make sure that calls to e.g. H5open also use converted path.
Some temporary files are being left in a tempdir (e.g. /tmp
under *nix*).
The situation is described tersely in
netcdf-c/docs/auth.html#REDIR Basically, when a url is used that
requires redirection, a physical cookiejar file is required
to exist in the file system in order for this to work.
Since it was difficult to figure out when redirection was
being used (it was internal to libcurl) I needed to be prepared for that
eventuality. The result was that I always created a cookiejar file if one
was not specified in the rc file. This actually occurs in two places:
one inside oc2 and one inside libdap4.
The solution was two-fold:
1. do not use a cookiejar directory -- create cookiejar file directly
2. ensure that all cookiejar related files are reclaimed by nc_close().
Note that if nc_close (or nc_abort) is not called for whatever reason,
then reclamation will not occur.
The problem was that for opendap, it is possible to use keywords
as identifiers
when there is no ambiguity. However, the DAP2
parser lost the case of the identifier used the lower case version.
Fix is to use the actual text of the symbol when it is used as an identifier.
Also added a test case for this (kwcase.*).
Additionally cleaned up some misc. dap2 testing problems.
1. ncdap_test/tst_ncdap3.sh was using an empty test set.
restored the testing of datasets.
2. as a consequence of #1, some tests needed to be updated with minor
tweeks.
3. fix dapmerge to handle multiple DODS_EXTRAS attributes.
4. modify buildattribute to suppress nul characters and terminate
the name at the first nul.
5. clean up various test scripts to remove residual, unused
references to obsolete netcdf-4 translation.
6. export e.g. NCDUMP from test_common.in so that non-top-level
shell scripts can access it.
