* re: https://github.com/Unidata/netcdf-c/pull/2278
* re: https://github.com/Unidata/netcdf-c/issues/2485
* re: https://github.com/Unidata/netcdf-c/issues/2474
This PR subsumes PR https://github.com/Unidata/netcdf-c/pull/2278.
Actually is a bit an omnibus covering several issues.
## PR https://github.com/Unidata/netcdf-c/pull/2278
Add support for the Zarr string type.
Zarr strings are restricted currently to be of fixed size.
The primary issue to be addressed is to provide a way for user to
specify the size of the fixed length strings. This is handled by providing
the following new attributes special:
1. **_nczarr_default_maxstrlen** —
This is an attribute of the root group. It specifies the default
maximum string length for string types. If not specified, then
it has the value of 64 characters.
2. **_nczarr_maxstrlen** —
This is a per-variable attribute. It specifies the maximum
string length for the string type associated with the variable.
If not specified, then it is assigned the value of
**_nczarr_default_maxstrlen**.
This PR also requires some hacking to handle the existing netcdf-c NC_CHAR
type, which does not exist in zarr. The goal was to choose numpy types for
both the netcdf-c NC_STRING type and the netcdf-c NC_CHAR type such that
if a pure zarr implementation read them, it would still work and an
NC_CHAR type would be handled by zarr as a string of length 1.
For writing variables and NCZarr attributes, the type mapping is as follows:
* "|S1" for NC_CHAR.
* ">S1" for NC_STRING && MAXSTRLEN==1
* ">Sn" for NC_STRING && MAXSTRLEN==n
Note that it is a bit of a hack to use endianness, but it should be ok since for
string/char, the endianness has no meaning.
For reading attributes with pure zarr (i.e. with no nczarr
atribute types defined), they will always be interpreted as of
type NC_CHAR.
## Issue: https://github.com/Unidata/netcdf-c/issues/2474
This PR partly fixes this issue because it provided more
comprehensive support for Zarr attributes that are JSON valued expressions.
This PR still does not address the problem in that issue where the
_ARRAY_DIMENSION attribute is incorrectly set. Than can only be
fixed by the creator of the datasets.
## Issue: https://github.com/Unidata/netcdf-c/issues/2485
This PR also fixes the scalar failure shown in this issue.
It generally cleans up scalar handling.
It also adds a note to the documentation describing that
NCZarr supports scalars while Zarr does not and also how
scalar interoperability is achieved.
## Misc. Other Changes
1. Convert the nczarr special attributes and keys to be all lower case. So "_NCZARR_ATTR" now used "_nczarr_attr. Support back compatibility for the upper case names.
2. Cleanup my too-clever-by-half handling of scalars in libnczarr.
The netcdf-c code has to deal with a variety of platforms:
Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ
significantly in the kind of file paths that they accept. So in
order to handle this, I have created a set of replacements for
the most common file system operations such as _open_ or _fopen_
or _access_ to manage the file path differences correctly.
A more limited version of this idea was already implemented via
the ncwinpath.h and dwinpath.c code. So this can be viewed as a
replacement for that code. And in path in many cases, the only
change that was required was to replace '#include <ncwinpath.h>'
with '#include <ncpathmgt.h>' and then replace file operation
calls with the NCxxx equivalent from ncpathmgr.h Note that
recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull
request should not require dealing with winpath.
The heart of the change is include/ncpathmgmt.h, which provides
alternate operations such as NCfopen or NCaccess and which properly
parse and rebuild path arguments to work for the platform on which
the code is executing. This mostly matters for Windows because of the
way that it uses backslash and drive letters, as compared to *nix*.
One important feature is that the user can do string manipulations
on a file path without having to worry too much about the platform
because the path management code will properly handle most mixed cases.
So one can for example concatenate a path suffix that uses forward
slashes to a Windows path and have it work correctly.
The conversion code is in libdispatch/dpathmgr.c, and the
important function there is NCpathcvt which does the proper
conversions to the local path format.
As a rule, most code should just replace their file operations with
the corresponding NCxxx ones defined in include/ncpathmgmt.h. These
NCxxx functions all call NCpathcvt on their path arguments before
executing the actual file operation.
In some rare cases, the client may need to directly use NCpathcvt,
but this should be avoided as much as possible. If there is a need
for supporting a new file operation not already in ncpathmgmt.h, then
use the code in dpathmgr.c as a template. Also please notify Unidata
so we can include it as a formal part or our supported operations.
Also, if you see an operation in the library that is not using the
NCxxx form, then please submit an issue so we can fix it.
Misc. Changes:
* Clean up the utf8 testing code; it is impossible to get some
tests to work under windows using shell scripts; the args do
not pass as utf8 but as some other encoding.
* Added an extra utf8 test case: test_unicode_path.sh
* Add a true test for HDF5 1.10.6 or later because as noted in
PR https://github.com/Unidata/netcdf-c/pull/1794,
HDF5 changed its Windows file path handling.
re: Issue https://github.com/Unidata/netcdf-c/issues/1848
The existing Virtual File Driver built to support byte-range
read-only file access is quite old. It turns out to be extremely
slow (reason unknown at the moment).
Starting with HDF5 1.10.6, the HDF5 library has its own version
of such a file driver. The HDF5 developers have better knowledge
about building such a driver and what incantations are needed to
get good performance.
This PR modifies the byte-range code in hdf5open.c so
that if the HDF5 file driver is available, then it is used
in preference to the one written by the Netcdf group.
Misc. Other Changes:
1. Moved all of nc4print code to ncdump to keep appveyor quiet.
disengagement of enable-netcdf4 from enable-hdf5.
That is, with the advent of nczarr, it is possible
to turn off hdf5 but still need netcdf-4 enabled
because nczarr uses libsrc4, but not libhdf5.
This change involves a bunch of things:
1. Modify configure.ac and CMakelist to make enable_hdf5
control if hdf5 support is provided. For back compatibility,
disable-netcdf4 is treated as disable-hdf5. But internally,
netcdf4 support is controlled only by the enabling of formats
that require it.
2. In support of #1, modify .travis.yml to use enable/disable-hdf5
instead of enable/disable-netcdf4.
3. test_common.in is modified to track selected features,
including enable-hdf5 and enable-s3-tests. This is used in
selected tests that mix netcdf-3 and netcdf4 tests.
4. The conflation of USE_HDF5 and USE_NETCDF4 is common in
code, tests, and build files, so all of those had to be weeded out.
5. It turns out that some of the NC4_dim functions really are HDF5 specific,
but are not treated as such. So they are moved from nc4dim.c to
hdf5dim.c or hdf5dispatch.c
6. Some generic functions in libhdf5 can be (and were) moved to libsrc4.
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
supercede PR: https://github.com/Unidata/netcdf-c/pull/1384
Since we have an mmap user, undeprecate it and make sure
it works. Other changes:
* fix test cases to work with make -j
* fix exposed ncgen error.
re: issue https://github.com/Unidata/netcdf-c/issues/1251
Assume that you have the URL to a remote dataset
which is a normal netcdf-3 or netcdf-4 file.
This PR allows the netcdf-c to read that dataset's
contents as a netcdf file using HTTP byte ranges
if the remote server supports byte-range access.
Originally, this PR was set up to access Amazon S3 objects,
but it can also access other remote datasets such as those
provided by a Thredds server via the HTTPServer access protocol.
It may also work for other kinds of servers.
Note that this is not intended as a true production
capability because, as is known, this kind of access to
can be quite slow. In addition, the byte-range IO drivers
do not currently do any sort of optimization or caching.
An additional goal here is to gain some experience with
the Amazon S3 REST protocol.
This architecture and its use documented in
the file docs/byterange.dox.
There are currently two test cases:
1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle
for a remote netcdf-3 file and a remote netcdf-4 file.
2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote
datasets.
This PR also incorporates significantly changed model inference code
(see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259).
1. It centralizes the code that infers the dispatcher.
2. It adds support for byte-range URLs
Other changes:
1. NC_HDF5_finalize was not being properly called by nc_finalize().
2. Fix minor bug in ncgen3.l
3. fix memory leak in nc4info.c
4. add code to walk the .daprc triples and to replace protocol=
fragment tag with a more general mode= tag.
Final Note:
Th inference code is still way too complicated. We need to move
to the validfile() model used by netcdf Java, where each
dispatcher is asked if it can process the file. This decentralizes
the inference code. This will be done after all the major new
dispatchers (PIO, Zarr, etc) have been implemented.
ret: https://github.com/Unidata/netcdf-c/issues/1162
The test nc_test/run_diskless2.sh fails
when LARGE_FILE_TESTS is enabled.
Since the goal of the test was to test out
diskless+persist on a reasonably large file,
I fixed by just limiting the file size to
1000000000L bytes.
https://github.com/Unidata/netcdf-c/issues/1168https://github.com/Unidata/netcdf-c/issues/1163https://github.com/Unidata/netcdf-c/issues/1162
This PR partially fixes memory leaks in the netcdf-c library,
in the ncdump utility, and in some test cases.
The netcdf-c library now runs memory clean with the assumption
that the --disable-utilities option is used. The primary remaining
problem is ncgen. Once that is fixed, I believe the netcdf-c library
will run memory clean with no limitations.
Notes
-----------
1. Memory checking was performed using gcc -fsanitize=address.
Valgrind-based testing has yet to be performed.
2. The pnetcdf, hdf4, and examples code has not been tested.
Misc. Non-leak changes
1. Make tst_diskless2 only run when netcdf4 is enabled (issue 1162)
2. Fix CmakeLists.txt to turn off logging if ENABLE_NETCDF_4 is OFF
3. Isolated all my debug scripts into a single top-level directory
called debug
4. Fix some USE_NETCDF4 dependencies in nc_test and nc_test4 Makefile.am
re: https://github.com/Unidata/netcdf-c/issues/1154
Inadvertently, the behavior of NC_DISKLESS with nc_create() was
changed in release 4.6.1. Previously, the NC_WRITE flag needed
to be explicitly used with NC_DISKLESS in order to cause the
created file to be persisted to disk.
Additional analyis indicated that the current NC_DISKLESS
implementation was seriously flawed.
This PR attempts to clean up and regularize the situation with
respect to NC_DISKLESS control. One important aspect of diskless
operation is that there are two different notions of write.
1. The file is read-write vs read-only when using the netcdf API.
2. The file is persisted or not to disk at nc_close().
Previously, these two were conflated. The rules now are
as follows.
1. NC_DISKLESS + NC_WRITE means that the file is read/write using the netcdf API
2. NC_DISKLESS + NC_PERSIST means that the file is persisted to a disk file at nc_close.
3. NC_DISKLESS + NC_PERSIST + NC_WRITE means both 1 and 2.
The NC_PERSIST flag is new and takes over the obsolete NC_MPIPOSIX flag.
NC_MPIPOSIX is still defined, but is now an alias for the NC_MPIIO flag.
It is also now the case that for netcdf-4, NC_DISKLESS is independent
of NC_INMEMORY and in fact it is an error to specify both flags
simultaneously.
Finally, the MMAP code was fixed to use NC_PERSIST as well.
Also marked MMAP as deprecated.
Also added a test case to test various combinations of NC_DISKLESS,
NC_PERSIST, and NC_WRITE.
This PR affects a number of files and especially test cases
that used NC_DISKLESS.
Misc. Unrelated fixes
1. fixed some warnings in ncdump/dumplib.c
The fix includes the following changes.
1. Checking and using the default file format at file create time is now
done only when the create mode (argument cmode) does not include any
format related flags, i.e. NC_64BIT_OFFSET, NC_64BIT_DATA,
NC_CLASSIC_MODEL, and NC_NETCDF4.
2. Adjustment of cmode based on the default format is now done in
NC_create() only. The idea is to adjust cmode before entering the
dispatcher's file create subroutine.
3. Any adjustment of cmode is removed from all I/O dispatchers, i.e.
NC4_create(), NC3_create(), and NCP_create().
4. Checking for illegal cmode has been done in check_create_mode() called
in NC_create(). This commit removes the redundant checking from
NCP_create().
5. Remove PnetCDF tests in nc_test/tst_names.c, so it can focus on testing
all classic formats and netCDF4 formats.
Two new test programs are added. They can be used to test netCDF with and
without this commit.
1. nc_test/tst_default_format.c
2. nc_test/tst_default_format_pnetcdf.c (use when PnetCDF is enabled).
re: github issue https://github.com/Unidata/netcdf-fortran/issues/82
This was originally discovered in the Fortran tests, but is
a problem in the C library.
The problem only occurred when using HDF5-1.10.x. The reason it
failed is that starting with 1.10, the hid_t type was changed
from 32 bits to 64 bits.
The function libsrc4/nc4memcb.c#NC4_image_init was using type int (doh!)
to return the hdf fileid instead of hid_t type. This, of course,
caused the id to be truncated and in turn later use of the id
caused hdf5 to fail.
Fix is trivial: replace int with hid_t. This also requires a related
change in nc4mem.c.
Also added the test case derived from the original Fortran code.
You would think I would learn...
Fix https://github.com/Unidata/netcdf-c/issues/962
1. remove the --disable-diskless option since it is no
longer needed. Similarly for CMakeLists.txt.
2. Fixed nc4files.c where BAIL and return were mixed
leading to situation where cleanup code was not
being invoked. This probably occurs elsewhere,
but I did not find any specifically.
and https://github.com/Unidata/netcdf-c/issues/708
Expand the NC_INMEMORY capabilities to support writing and accessing
the final modified memory.
Three new functions have been added:
nc_open_memio, nc_create_mem, and nc_close_memio.
The following new capabilities were added.
1. nc_open_memio() allows the NC_WRITE mode flag
so a chunk of memory can be passed in and be modified
2. nc_create_mem() allows the NC_INMEMORY flag to be set
to cause the created file to be kept in memory.
3. nc_close_mem() allows the final in-memory contents to be
retrieved at the time the file is closed.
4. A special flag, NC_MEMIO_LOCK, is provided to ensure that
the provided memory will not be freed or reallocated.
Note the following.
1. If nc_open_memio() is called with NC_WRITE, and NC_MEMIO_LOCK is not set,
then the netcdf-c library will take control of the incoming memory.
This means that the original memory block should not be freed
but the block returned by nc_close_mem() must be freed.
2. If nc_open_memio() is called with NC_WRITE, and NC_MEMIO_LOCK is set,
then modifications to the original memory may fail if the space available
is insufficient.
Documentation is provided in the file docs/inmemory.md.
A test case is provided: nc_test/tst_inmemory.c driven by
nc_test/run_inmemory.sh
WARNING: changes were made to the dispatch table for
the close entry. From int (*close)(int) to int (*close)(int,void*).
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
