Add the ability to set some additional curlopt values via .daprc (aka .dodsrc).
This effects both DAP2 and DAP4 protocols.
Related issues:
[1] re: esupport: KOZ-821332
[2] re: github issue https://github.com/Unidata/netcdf4-python/issues/836
[3] re: github issue https://github.com/Unidata/netcdf-c/issues/1074
1. CURLOPT_BUFFERSIZE: Relevant to [1]. Allow user to set the read/write
buffersizes used by curl.
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.READ.BUFFERSIZE=n
where n is the buffersize in bytes. There is a built-in (to curl)
limit of 512k for this value.
2. CURLOPT_TCP_KEEPALIVE (and CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL):
Relevant (maybe) to [2] and [3]. Allow the user to turn on KEEPALIVE
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.KEEPALIVE=on|n/m
If the value is "on", then simply enable default KEEPALIVE. If the value
is n/m, then enable KEEPALIVE and set KEEPIDLE to n and KEEPINTVL to m.
url parameter handling, the parameter
lookup code was ignoring parameters
because I was giving it a url stripped
of parameters instead of the one with
parameters.
This code change fixes the parameter processing
so it again used the correct url.
reference:
docs/OPeNDAP.dox#section Defined Client Parameters
v4.5-release-candidate branch and master branch ASAP.
The bug occurs in d4rc.c where strcmp is being applied to NULL.
Also, the code in which it occurs is debugging code, so it needs
to be #ifdef'd. This fix may cause minor conflicts with other
outstanding pull requests that fix the same bug. But the
conflicts should be minor and easy to resolve.
Primary change is to cleanup code and remove duplicated code.
1. Unify the rc file reading into libdispatch/drc.c. Eventually extend
if we need rc file for netcdf itself as opposed to the dap code.
2. Unify the extraction from the rc file of DAP authorization info.
3. Misc. other small unifications: make temp file, read file.
4. Avoid use of libcurl when reading file:// because
there is some kind of problem with the Visual Studio version.
Might be related to the winpath problem.
In any case, do direct read instead.
5. Add new error code NC_ERCFILE for errors in reading RC file.
6. Complete documentation cleanup as indicated in this comment
https://github.com/Unidata/netcdf-c/pull/472#issuecomment-325926426
7. Convert some occurrences of #ifdef _WIN32 to #ifdef _MSC_VER
generates garbage. This in turn interferes with using .netrc
because the garbage user+pwd can will override the
.netrc. Note that this may work ok sometimes
if the garbage happens to start with a nul character.
2. It turns out that the user:pwd combination needs to support
character escaping. One reason is the user may contain an '@' character.
The other is that modern password rules make it not unlikely that
the password will contain characters that interfere with url parsing.
So, the rule I have implemented is that all occurrences of the user:pwd
format must escape any dodgy characters. The escape format is URL escaping
of the form %XX. This applies both to user:pwd
embedded in a URL as well as the use of HTTP.CREDENTIALS.USERPASSWORD
in a .dodsrc/.daprc file. The user and password in .netrc must not
be escaped. This is now documented in docs/auth.md
The fix for #2 actually obviated #1. Now, internally, the user and pwd
are stored separately and not in the user:pwd format. They are combined
(and escaped) only when needed.
were added to provide a path name converter from e.g. cygwin
paths to e.g. windows paths. This is necessary because
the shell scripts may produce cygwin paths, but the code
may have been compiled with Visual Studio. Similar issues
arise with Mingw.
At appropriate places, and if using Visual Studio or Mingw,
I added calls to the path conversion code.
Apparently I forgot to find all the places where this
conversion was needed. So this pr does the following:
1. Push the calls to the converter to the various libXXX
directories and out of libdispatch/dfile.c.
2. Add conversion calls to other parts of the code like oc2.
I also turns out that conversion code in dapcvt.c
had a bug when handling DAP Byte type under visual studio.
Notes:
1. there may still be places I missed that need to do path conversion.
2. need to make sure that calls to e.g. H5open also use converted path.
Some temporary files are being left in a tempdir (e.g. /tmp
under *nix*).
The situation is described tersely in
netcdf-c/docs/auth.html#REDIR Basically, when a url is used that
requires redirection, a physical cookiejar file is required
to exist in the file system in order for this to work.
Since it was difficult to figure out when redirection was
being used (it was internal to libcurl) I needed to be prepared for that
eventuality. The result was that I always created a cookiejar file if one
was not specified in the rc file. This actually occurs in two places:
one inside oc2 and one inside libdap4.
The solution was two-fold:
1. do not use a cookiejar directory -- create cookiejar file directly
2. ensure that all cookiejar related files are reclaimed by nc_close().
Note that if nc_close (or nc_abort) is not called for whatever reason,
then reclamation will not occur.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
DAPRCFILE. Note that the value of this environment
variable should be the absolute path of the rc file, not
the path to its containing directory.
2. fixup testauth.sh and add some new tests
3. synch oc
This supports better authorization
handling for DAP requests, especially redirection
based authorization. I also added a new test case
ncdap_tests/testauth.sh.
Specifically, suppose I have a netrc file /tmp/netrc
containing this.
machine uat.urs.earthdata.nasa.gov login xxxxxx password yyyyyy
Also suppose I have a .ocrc file containing these lines
HTTP.COOKIEJAR=/tmp/cookies
HTTP.NETRC=/tmp/netrc
Assume that .ocrc is in the local directory or HOME.
Then this command should work (assuming a valid login and password).
ncdump -h "https://54.86.135.31/opendap/data/nc/fnoc1.nc"
should be under ENABLE_DAP_REMOTE_TESTS.
Fixed to make sure that this is so.
Also attempted to fix ncdap_test/CMakeLists.txt,
but probably got it wrong.
HT to Nico Schlomer.
2. Attempted to reduce the number of conversion errors
when -Wconversion is set. Fixed oc2, but
rest of netcdf remains to be done.
HT to Nico Schlomer.
3. When doing #2, I discovered an error in ncgen.y
that has remained hidden. This required some other
test case fixes.
Fix Http Basic Authorization.
The problem is really in oc2.0.
In order for it to work,
the CURLOPT_COOKIEJAR must have
a non-null value. The code
was already there, but not being
used for some reason.
1. fixed cookiejar code in oc2.0
2. synched oc2.0 with netcdf-c/oc2
3. added a test case
