This PR started as an attempt to add unlimited dimensions to NCZarr.
It did that, but this exposed significant problems with test interference.
So this PR is mostly about fixing -- well mitigating anyway -- test
interference.
The problem of test interference is now documented in the document docs/internal.md.
The solutions implemented here are also describe in that document.
The solution is somewhat fragile but multiple cleanup mechanisms
are provided. Note that this feature requires that the
AWS command line utility must be installed.
## Unlimited Dimensions.
The existing NCZarr extensions to Zarr are modified to support unlimited dimensions.
NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group".
Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms
Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2.
* Form 1: An integer representing the size of the dimension, which is used for simple named dimensions.
* Form 2: A dictionary with the following keys and values"
- "size" with an integer value representing the (current) size of the dimension.
- "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension.
For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases.
That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension.
This is the standard semantics for unlimited dimensions.
Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following.
* Did a partial refactor of the slice handling code in zwalk.c to clean it up.
* Added a number of tests for unlimited dimensions derived from the same test in nc_test4.
* Added several NCZarr specific unlimited tests; more are needed.
* Add test of endianness.
## Misc. Other Changes
* Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the
AWS Transfer Utility mechanism. This is controlled by the
```#define TRANSFER```` command in that file. It defaults to being disabled.
* Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE).
* Fixed an obscure memory leak in ncdump.
* Removed some obsolete unit testing code and test cases.
* Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c.
* Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4.
* Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects.
* Modify the semantics of zodom to properly handle stride > 1.
* Add a truncate operation to the libnczarr zmap code.
## Improvements to S3 Documentation
* Create a new document *quickstart_paths.md* that give a summary of the legal path formats used by netcdf-c. This includes both file paths and URL paths.
* Modify *nczarr.md* to remove most of the S3 related text.
* Move the S3 text from *nczarr.md* to a new document *cloud.md*.
* Add some S3-related text to the *byterange.md* document.
Hopefully, this will make it easier for users to find the information they want.
## Rebuild NCZarr Testing
In order to avoid problems with running make check in parallel, two changes were made:
1. The *nczarr_test* test system was rebuilt. Now, for each test.
any generated files are kept in a test-specific directory, isolated
from all other test executions.
2. Similarly, since the S3 test bucket is shared, any generated S3 objects
are isolated using a test-specific key path.
## Other S3 Related Changes
* Add code to ensure that files created on S3 are reclaimed at end of testing.
* Used the bash "trap" command to ensure S3 cleanup even if the test fails.
* Cleanup the S3 related configure.ac flag set since S3 is used in several places. So now one should use the option *--enable-s3* instead of *--enable-nczarr-s3*, although the latter is still kept as a deprecated alias for the former.
* Get some of the github actions yml to work with S3; required fixing various test scripts adding a secret to access the Unidata S3 bucket.
* Cleanup S3 portion of libnetcdf.settings.in and netcdf_meta.h.in and test_common.in.
* Merge partial S3 support into dhttp.c.
* Create an experimental s3 access library especially for use with Windows. It is enabled by using the options *--enable-s3-internal* (automake) or *-DENABLE_S3_INTERNAL=ON* (CMake). Also add a unit-test for it.
* Move some definitions from ncrc.h to ncs3sdk.h
## Other Changes
* Provide a default implementation of strlcpy and move this and similar defaults into *dmissing.c*.
re: https://github.com/Unidata/netcdf-c/issues/2189
Compression of a variable whose type is variable length
fails for all current filters. This is because at some point,
the compression buffer will contain pointers to data instead
of the actual data. Compression of pointers of course is meaningless.
The PR changes the behavior of nc_def_var_filter so that it will
fail with error NC_EFILTER if an attempt is made to add a filter
to a variable whose type is variable-length.
A variable is variable-length if it is of type string or VLEN
or transitively (via a compound type) contains a string or VLEN.
Also added a test case for this.
## Misc Changes
1. Turn off a number of debugging statements
re: https://github.com/Unidata/netcdf-c/issues/2117
re: https://github.com/Unidata/netcdf-c/issues/2119
* Modify libsrc to allow byte-range reading of netcdf-3 files in private S3 buckets; this required using the aws sdk. Also add a test case.
* The aws sdk can sometimes cause problems if the Awd::ShutdownAPI function is not called. So at optional atexit() support to ensure it is called. This is disabled for Windows.
* Add documentation to nczarr.md on how to build and use the aws sdk under windows. Currently it builds, but testing fails.
* Switch testing from stratus to the Unidata bucket on S3.
* Improve support for the s3: url protocol.
* Add a s3 specific utility code file: ds3util.c
* Modify NC_infermodel to attempt to read the magic number of byte-ranged files in S3.
## Misc.
* Move and rename the core S3 SDK wrapper code (libnczarr/zs3sdk.cpp) to libdispatch since it now used in libsrc as well as libnczarr.
* Add calls to nc_finalize in the utilities in case atexit is disabled.
* Add header only json parser to the distribution rather than as a built source.
## S3 Related Fixes
* Add comprehensive support for specifying AWS profiles to provide access credentials.
* Parse the files "~/.aws/config" and "~/.aws/credentials to provide credentials for the HDF5 ROS3 driver and to locate default region.
* Add a function to obtain the currently active S3 credentials. The search rules are defined in docs/nczarr.md.
* Provide documentation for the new features.
* Modify the struct NCauth (in include/ncauth.h) to replace specific S3 credentials with a profile name.
* Add a unit test to test the operation of profile and credentials management.
* Add support for URLS of the form "s3://<bucket>/<key>"; this requires obtaining a default region.
* Allows the specification of profile and/or region in a URL of the form "#mode=nczarr,...&aws.region=...&aws.profile=..."
## Misc. Fixes
* Move the ezxml code to libdispatch so that it can be used both by DAP4 and nczarr.
* Modify nclist to provide a deep clone operation.
* Modify ncuri to provide a deep clone operation.
* Modify the .rc file format to allow the specification of a path to be tested when looking for an entry in the .rc file.
* Ensure that the NC_rcload function is called.
* Modify nchttp to support setting request headers.
re: https://github.com/Unidata/netcdf-c/pull/2003#issuecomment-847637871
Turns out that mingw defines both _WIN32 and also defines getopt.
This means that this test:
````
#ifdef _WIN32
#include "XGetopt.h"
#endif
````
fails on this error:
````
../include/XGetopt.h:38:24: error: conflicting types for 'getopt'
````
Fix is to replace
````
#ifdef _WIN32
with
#if defined(_WIN32) && !defined(__MINGW32__)
````
re: https://github.com/Unidata/netcdf-c/issues/1988
There was an issue with certain shell programs (bash notably).
For certain platforms and when given a url that had an escaped
'#' character (e.g. \\#) bash would not remove the backslash. So I
had to add a hack for this. Unfortunately I overdid it and it
removed all '' characters. This is ok for non-windows platforms,
but obviously fails for windows.
The fix is this.
1. In a utility program (ncgen, ncdump, nccopy, etc) there is probably a call (or calls) to NC_backslashUnescape(xxx) where xxx is a path argument from the command line.
2. Replace each such call with NC_shellUnescape(xxx).
The NC_shellUnescape function was added and searched only for occurrences of "\#" and replaces them with "#".
The netcdf-c code has to deal with a variety of platforms:
Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ
significantly in the kind of file paths that they accept. So in
order to handle this, I have created a set of replacements for
the most common file system operations such as _open_ or _fopen_
or _access_ to manage the file path differences correctly.
A more limited version of this idea was already implemented via
the ncwinpath.h and dwinpath.c code. So this can be viewed as a
replacement for that code. And in path in many cases, the only
change that was required was to replace '#include <ncwinpath.h>'
with '#include <ncpathmgt.h>' and then replace file operation
calls with the NCxxx equivalent from ncpathmgr.h Note that
recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull
request should not require dealing with winpath.
The heart of the change is include/ncpathmgmt.h, which provides
alternate operations such as NCfopen or NCaccess and which properly
parse and rebuild path arguments to work for the platform on which
the code is executing. This mostly matters for Windows because of the
way that it uses backslash and drive letters, as compared to *nix*.
One important feature is that the user can do string manipulations
on a file path without having to worry too much about the platform
because the path management code will properly handle most mixed cases.
So one can for example concatenate a path suffix that uses forward
slashes to a Windows path and have it work correctly.
The conversion code is in libdispatch/dpathmgr.c, and the
important function there is NCpathcvt which does the proper
conversions to the local path format.
As a rule, most code should just replace their file operations with
the corresponding NCxxx ones defined in include/ncpathmgmt.h. These
NCxxx functions all call NCpathcvt on their path arguments before
executing the actual file operation.
In some rare cases, the client may need to directly use NCpathcvt,
but this should be avoided as much as possible. If there is a need
for supporting a new file operation not already in ncpathmgmt.h, then
use the code in dpathmgr.c as a template. Also please notify Unidata
so we can include it as a formal part or our supported operations.
Also, if you see an operation in the library that is not using the
NCxxx form, then please submit an issue so we can fix it.
Misc. Changes:
* Clean up the utf8 testing code; it is impossible to get some
tests to work under windows using shell scripts; the args do
not pass as utf8 but as some other encoding.
* Added an extra utf8 test case: test_unicode_path.sh
* Add a true test for HDF5 1.10.6 or later because as noted in
PR https://github.com/Unidata/netcdf-c/pull/1794,
HDF5 changed its Windows file path handling.
The primary change is to support the use of a zip file as a
storage format. Simultaneously the .nz4 support is made obsolete
Use of zip requires the libzip support library, so a number of
changes to the build files (Makefile.am, CMakeLists.txt) are
necessary to locate and incorporate libzip. The nczarr_tests
tests are also changed to add zip testing.
Other changes:
* Make sure distcheck leaves no files around.
* Add some functions to netcdf_aux to export some functions of libnetcdf.
* Add a new error NC_EFOUND as the complement of NC_EEMPTY.
* Add tracing support to nclog and use it in libnczarr.
* Modify the zmap interface to support the writeonce semantics of zip.
* Create a new s3util.c to support a variety of S3 auxilliary functions.
* EXTERNL'ize a number of functions so they can be used in s3util.
* Add support for the S3 ListObjects CommonPrefixes mechanism
to improve search.
* Add experimental support for running nczarr X s3 tests against
the actual Amazon S3 cloud.
