re: https://github.com/Unidata/netcdf-c/issues/2008
The fill_value key in a .zarray should have a single value,
but it currently has a value that is a 1 element array.
Fix is to pull out the single element.
This occurred because the fill_value is taken from the _FillValue attribute,
and all netcdf attributes are stored as arrays, of length 1 in this case.
In a related change, any attribute with length 1 is now stored in .zattrs
as a singleton rather than an array of length 1. This make the generated
Zarr more consistent with other Zarr implementations.
Misc. other changes:
1. Fix bug in testpathcvt caused by the way various shells handle backslash escapes.
2. Fix bug in testauth where test for MSVC is wrong.
re: https://github.com/Unidata/netcdf-c/issues/1827
The issue is partly resolved by this PR. The proximate problem appears to be that the semantics of mkstemp in **nix is different than the semantics of _mktemp_s in Windows. I had thought they were the same but that is incorrect. The _mktemp_s function will only produce 26 different files and so the netcdf temp file code will fail after about that many iterations.
So, to solve this, I created my own version of mkstemp for windows that uses a random number generator. This appears to solve the reported issue. I also added the testcase ncdap_test/test_manyurls but made it conditional on --enable-dap-long-tests because it is very slow.
I did note that the provided test program now fails after some 800 iterations with a libcurl error claiming it cannot resolve the host name. My belief is that the library is just running out of resources at this point: too many open curl handles or some such. I doubt if this failure is fixable.
So bottom line is that it is really important to do nc_close when you are finished with a file.
Misc. Other Changes:
1. I took the opportunity to clean up some bad string hacks in the code. Specifically
* change all uses of strncat to strlcat
* remove old string hacks: occoncat and occopycat
2. Add heck to see if test.opendap.org is running and if not, then skip test
3. Make CYGWIN use TEMP environment variable
Re: https://github.com/zarr-developers/zarr-python/pull/716
The Zarr version 2 spec has been extended to include the ability
to choose the dimension separator in chunk name keys. The legal
separators has been extended from {'.'} to {'.' '/'}. So now it
is possible to use a key like "0/1/2/0" for chunk names.
This PR implements this for NCZarr. The V2 spec now says that
this separator can be set on a per-variable basis. For now, I
have chosen to allow this be set only globally by adding a key
named "ZARR.DIMENSION_SEPARATOR=<char>" in the
.daprc/.dodsrc/ncrc file. Currently, the only legal separator
characters are '.' (the default) and '/'. On writing, this key
will only be written if its value is different than the default.
This change caused problems because supporting a separator of '/'
is difficult to parse when keys/paths use '/' as the path separator.
A test case was added for this.
Additionally, make nczarr be enabled default by default. This required
some additional changes so that if zip and/or AWS S3 sdk are unavailable,
then they are disabled for NCZarr.
In addition the following unrelated changes were made.
1. Tested that pure-zarr mode could read an nczarr formatted store.
1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added.
1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl
is not found then the other options that depend upon it properly
are disabled.
1. I decided that xarray support should be enabled by default for pure
zarr. In order to allow disabling, I added a new mode flag "noxarray".
1. Certain test in nczarr_test depend on use of .dodsrc. In order for these
to work when testing in parallel, some inter-test dependencies needed to
be added.
1. Improved authorization testing to use changes in thredds.ucar.edu
Primary Fixes:
* Add a whole variable optimization -- used in the rare case that nc_get/put_vara covers the whole of a variable and the variable has a single chunk.
* Fix chunking error when stride causes whole chunks to be skipped.
* Fix some memory leaks
* Add test cases
* Add one performance test to nczarr_test/. This uses the timer utils from unit_test: timer_utils.[ch].
* Move ncdumpchunks utility from ncdump to nczarr_test
Misc. Other Changes:
* Make check for aws libraries conditional on --enable-nczarr-s3
* Remove all but one bm tests from nczarr_test until they are working.
* Remove another dependency on HDF5 from supposedly non-HDF5 specific code; specifically hdf5_log_hdf5.
* Make the BAIL2 macro be hdf5 specific and replace elsewhere with an HDF5 independent equivalent.
* Move hdf5cache.c to libsrc4/nc4cache.c because it is used by nczarr.
* Modify unit_tests so that some of them are run even if using Windows.
* Misc. small bug fixes and refactors and memory leaks.
* Rename some conflicting tests for cmake.
* Attempted to make nc_perf work with cmake and failed.
Re: GH Issue https://github.com/Unidata/netcdf-c/issues/1900
Apparently the clock_gettime() function is not always available.
It is used in unit_test/tst_exhash.c and unit_test/tst_xcache.c.
To solve this, a number of things were changed:
* Move the timing code to a new file unit_tests/timer_utils.[ch]
* Modify the timing code to choose one of several timing methods
depending on availability. The prioritized order is as follows:
1. If Windows, use the QueryPerformanceCounter mechanism else
2. Use clock_gettime if available else
3. Use gettimeofday if available else
4. Use getrusage if available
Note that the resolution of 3 and 4 is less than 1 or 2.
Misc. Other Changes:
* Move the test in CMakeLists.txt that disables unit tests for WIN32 to unit_test/CMakeLists.txt since some unit tests actually work under Visual Studio.
* Fix some of the unit tests to work under visual studio
* Fix problem with using remove() in zmap_nzf.c
* Remove some warning about use of EXTERNL
disengagement of enable-netcdf4 from enable-hdf5.
That is, with the advent of nczarr, it is possible
to turn off hdf5 but still need netcdf-4 enabled
because nczarr uses libsrc4, but not libhdf5.
This change involves a bunch of things:
1. Modify configure.ac and CMakelist to make enable_hdf5
control if hdf5 support is provided. For back compatibility,
disable-netcdf4 is treated as disable-hdf5. But internally,
netcdf4 support is controlled only by the enabling of formats
that require it.
2. In support of #1, modify .travis.yml to use enable/disable-hdf5
instead of enable/disable-netcdf4.
3. test_common.in is modified to track selected features,
including enable-hdf5 and enable-s3-tests. This is used in
selected tests that mix netcdf-3 and netcdf4 tests.
4. The conflation of USE_HDF5 and USE_NETCDF4 is common in
code, tests, and build files, so all of those had to be weeded out.
5. It turns out that some of the NC4_dim functions really are HDF5 specific,
but are not treated as such. So they are moved from nc4dim.c to
hdf5dim.c or hdf5dispatch.c
6. Some generic functions in libhdf5 can be (and were) moved to libsrc4.
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
re: https://github.com/Unidata/netcdf-c/issues/1451
The situation with the various DAP (and other) remote test
servers is currently in a state of flux. For example, Unidata
admin is planning to forcibly shift the remote test server to
remotetest.unidata.ucar.edu soon. In addition, the server
test.opendap.org has shown some recent instability.
The result is that various DAP (and byterange) tests can fail
unexpectedly. This is an irritant to users and reveals nothing
about test sucess or failure.
Solve by modifying tests to report server inaccessibility and
otherwise pretend to succeed.
This puts an onus on Unidata to detect such server failures, but
will not cause users to see spurious failures. [Note. Do similar
fix for netcdf-java]. The check is:
1. export SETX=1 to cause all the shell scripts to trace
2. search the log files for the phrase "WARNING" (in upper case)
and see if it is complaining about not finding a server.
Misc. Changes
-------------
1. Added a pingurl program to see if a server was up.
2. modified some test case url targets
re: https://github.com/Unidata/netcdf-c/issues/1373 (partial)
* Mark some global constants be const to indicate to make them easier to track.
* Hide direct access to the ncrc_globalstate behind a function call.
* Convert dispatch tables to constants (except the user defined ones)
This has some consequences in terms of function arguments needing to be marked
as const also.
* Remove some no longer needed global fields
* Aggregate all the globals in nclog.c
* Uniformly replace nc_sizevector{0,1} with NC_coord_{zero,one}
* Uniformly replace nc_ptrdffvector1 with NC_stride_one
* Remove some obsolete code
This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173
Sorry that it is so big, but leak suppression can be complex.
This PR fixes all remaining memory leaks -- as determined by
-fsanitize=address, and with the exceptions noted below.
Unfortunately. there remains a significant leak that I cannot
solve. It involves vlens, and it is unclear if the leak is
occurring in the netcdf-c library or the HDF5 library.
I have added a check_PROGRAM to the ncdump directory to show the
problem. The program is called tst_vlen_demo.c To exercise it,
build the netcdf library with -fsanitize=address enabled. Then
go into ncdump and do a "make clean check". This should build
tst_vlen_demo without actually executing it. Then do the
command "./tst_vlen_demo" to see the output of the memory
checker. Note the the lost malloc is deep in the HDF5 library
(in H5Tvlen.c).
I am temporarily working around this error in the following way.
1. I modified several test scripts to not execute known vlen tests
that fail as described above.
2. Added an environment variable called NC_VLEN_NOTEST.
If set, then those specific tests are suppressed.
This should mean that the --disable-utilities option to
./configure should not need to be set to get a memory leak clean
build. This should allow for detection of any new leaks.
Note: I used an environment variable rather than a ./configure
option to control the vlen tests. This is because it is
temporary (I hope) and because it is a bit tricky for shell
scripts to access ./configure options.
Finally, as before, this only been tested with netcdf-4 and hdf5 support.
https://github.com/Unidata/netcdf-c/issues/1168https://github.com/Unidata/netcdf-c/issues/1163https://github.com/Unidata/netcdf-c/issues/1162
This PR partially fixes memory leaks in the netcdf-c library,
in the ncdump utility, and in some test cases.
The netcdf-c library now runs memory clean with the assumption
that the --disable-utilities option is used. The primary remaining
problem is ncgen. Once that is fixed, I believe the netcdf-c library
will run memory clean with no limitations.
Notes
-----------
1. Memory checking was performed using gcc -fsanitize=address.
Valgrind-based testing has yet to be performed.
2. The pnetcdf, hdf4, and examples code has not been tested.
Misc. Non-leak changes
1. Make tst_diskless2 only run when netcdf4 is enabled (issue 1162)
2. Fix CmakeLists.txt to turn off logging if ENABLE_NETCDF_4 is OFF
3. Isolated all my debug scripts into a single top-level directory
called debug
4. Fix some USE_NETCDF4 dependencies in nc_test and nc_test4 Makefile.am
re: issue https://github.com/Unidata/netcdf-c/issues/1151
Modify DAP2 and DAP4 code to handle case when _FillValue type is not
same as the parent variable type.
Specifically:
1. Define a parameter [fillmismatch] to allow this mismatch;
default is to disallow.
2. If allowed, forcibly change the type of the _FillValue to match
the parent variable.
3. If allowed Convert the values to match new type
4. Generate a log message
5. if not allowed, then fail
Implementing this required some changes to ncdap_test/dapcvt.c
Also added test cases.
Minor Unrelated Changes:
1. There were a number of warnings about e.g.
assigning a const char* to a char*. Fix these
2. In nccopy.1, replace .NP with .IP "n"
(re PR https://github.com/Unidata/netcdf-c/pull/1144)
3. fix minor error in ncdump/ocprint
re: github issue https://github.com/Unidata/netcdf-c/issues/1111
One of the less common use cases for the in-memory feature is
apparently failing with HDF5-1.10.x. The fix is complicated and
requires significant changes to libhdf5/nc4memcb.c. The current
setup is detailed in the file docs/inmeminternal.dox.
Additionally, it was discovered that the program
nc_test/tst_inmemory.c, which is invoked by
nc_test/run_inmemory.sh, actually was failing because of the
above problem. But the failure is not detected since the script
does not return non-zero value.
Other Changes:
1. Fix nc_test_tst_inmemory to return errors correctly.
2. Make ncdap_tests/findtestserver.c and dap4_tests/findtestserver4.c
be generated from ncdap_test/findtestserver.c.in.
3. Make LOG() print output to stderr instead of stdout to
avoid contaminating e.g. ncdump output.
4. Modify the handling of NC_INMEMORY and NC_DISKLESS flags
to properly handle that NC_DISKLESS => NC_INMEMORY. This
affects a number of code pieces, especially memio.c.
