More fixes in collaboration with I.P.
- Adjusted ArcGIS and AgriMetSoft NetCDF-Extractor sections' text and spacing
*Check to see if the spacing for these sections is correct
*Did not address broken links, but should address both broken links and links that re-direct to unintended webpages
More fixes in collaboration with I.P.
* Did not fix spacing for the ArcGIS nor AgriMetSoft sections
* Did not address broken links, but should address both broken links and links that re-direct to unintended webpages
Fixed per I.P.'s work
- Need to ensure proper way to include the u umlaut in line 455
- Didn't address broken link issues
-Left MeteoExplorer's NetCDF uppercased due to library/software reference
-Didn't change Mary Haley's email in the NCL section
-Left nctoolbox's NetCDF-Java
***Stopped short off ncvtk errors (line 149)
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
I see that there is no way to set CURLOPT_CONNECTTIMEOUT,
but there is support for CURLOPT_TIMEOUT.
So, accept the line 'HTTP.CONNECTTIMEOUT'
in .rc file to allow user to set CURLOPT_CONNECTTIMEOUT.
The CMakeLists.txt actually uses `HDF5_C_LIBRARY` and `HDF5_HL_LIBRARY`
to find non-standard HDF5 installation. This just updates the FAQ with
the correct usage.
* For URL paths, the new approach essentially centralizes all information
in the URL into the "#mode=" fragment key and uses that value
to determine the dispatcher for (most) URLs.
* The new approach has the following steps:
1. canonicalize the path if it is a URL.
2. use the mode= fragment key to determine the dispatcher
3. if dispatcher still not determined, then use the mode flags
argument to nc_open/nc_create to determine the dispatcher.
4. if the path points to something readable, attempt to read the
magic number at the front, and use that to determine the dispatcher.
this case may override all previous cases.
* Misc changes.
1. Update documentation
2. Moved some unit tests from libdispatch to unit_test directory.
3. Fixed use of wrong #ifdef macro in test_filter_reg.c
[I think this may fix an previously reported esupport query].
supercede PR: https://github.com/Unidata/netcdf-c/pull/1384
Since we have an mmap user, undeprecate it and make sure
it works. Other changes:
* fix test cases to work with make -j
* fix exposed ncgen error.
Priority: Low
re: issue https://github.com/Unidata/netcdf-c/issues/1329
HDF5 has the ability to programmatically define new filters,
as opposed to using HDF5_PLUGIN_PATH env variable.
This PR adds support for that feature.
Not clear how useful this is, though.
See docs/filters.md for details.
re: Issue https://github.com/Unidata/netcdf-c/issues/1365
At some point (4.6.1) we changed the diskless handling of flags
and added a new NC_PERSIST flag. Looks like we did not fix all
occurrences of the old flag set, specifically for 'nccopy -w' command.
Also added some tests (tst_nccopy_w{3,4}.sh) for this situation.
A user suggested that the nccopy -F option
syntax should be extended to support specification
of multiple (or all) variables in a single -F option.
The new syntax allows:
1. '*' as the name of the variable; this means apply the
filter to all variables in the data set.
2. *var1|var2|...* as the variable name to indicate that the filter
should be applied to the multiple specified variables.
re: issue https://github.com/Unidata/netcdf-c/issues/1278
re: issue https://github.com/Unidata/netcdf-c/issues/876
re: issue https://github.com/Unidata/netcdf-c/issues/806
* Major change to the handling of 8-byte parameters for nc_def_var_filter.
The old code was not well thought out.
* The new algorithm is documented in docs/filters.md.
* Added new utility file plugins/H5Zutil.c to support
* Modified plugins/H5Zmisc.c to use new algorithm
the new algorithm.
* Renamed include/ncfilter.h to include/netcdf_filter.h
and made it an installed header so clients can access the
new algorithm utility.
* Fixed nc_test4/tst_filterparser.c and nc_test4/test_filter_misc.c
to use the new algorithm
* libdap4/ fixes:
* d4swap.c has an error in the endian pre-processing such
that record counts were not being swapped correctly.
* d4data.c had an error in that checksums were being computed
after endian swapping rather than before.
* ocinitialize() was never being called, so xxdr bigendian handling
was never set correctly.
* Required adding debug statements to occompile
* Found and fixed memory leak in ncdump.c
Not tested:
* HDF4
* Pnetcdf
* parallel HDF5
re: issue https://github.com/Unidata/netcdf-c/issues/1251
Assume that you have the URL to a remote dataset
which is a normal netcdf-3 or netcdf-4 file.
This PR allows the netcdf-c to read that dataset's
contents as a netcdf file using HTTP byte ranges
if the remote server supports byte-range access.
Originally, this PR was set up to access Amazon S3 objects,
but it can also access other remote datasets such as those
provided by a Thredds server via the HTTPServer access protocol.
It may also work for other kinds of servers.
Note that this is not intended as a true production
capability because, as is known, this kind of access to
can be quite slow. In addition, the byte-range IO drivers
do not currently do any sort of optimization or caching.
An additional goal here is to gain some experience with
the Amazon S3 REST protocol.
This architecture and its use documented in
the file docs/byterange.dox.
There are currently two test cases:
1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle
for a remote netcdf-3 file and a remote netcdf-4 file.
2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote
datasets.
This PR also incorporates significantly changed model inference code
(see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259).
1. It centralizes the code that infers the dispatcher.
2. It adds support for byte-range URLs
Other changes:
1. NC_HDF5_finalize was not being properly called by nc_finalize().
2. Fix minor bug in ncgen3.l
3. fix memory leak in nc4info.c
4. add code to walk the .daprc triples and to replace protocol=
fragment tag with a more general mode= tag.
Final Note:
Th inference code is still way too complicated. We need to move
to the validfile() model used by netcdf Java, where each
dispatcher is asked if it can process the file. This decentralizes
the inference code. This will be done after all the major new
dispatchers (PIO, Zarr, etc) have been implemented.
This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173
Sorry that it is so big, but leak suppression can be complex.
This PR fixes all remaining memory leaks -- as determined by
-fsanitize=address, and with the exceptions noted below.
Unfortunately. there remains a significant leak that I cannot
solve. It involves vlens, and it is unclear if the leak is
occurring in the netcdf-c library or the HDF5 library.
I have added a check_PROGRAM to the ncdump directory to show the
problem. The program is called tst_vlen_demo.c To exercise it,
build the netcdf library with -fsanitize=address enabled. Then
go into ncdump and do a "make clean check". This should build
tst_vlen_demo without actually executing it. Then do the
command "./tst_vlen_demo" to see the output of the memory
checker. Note the the lost malloc is deep in the HDF5 library
(in H5Tvlen.c).
I am temporarily working around this error in the following way.
1. I modified several test scripts to not execute known vlen tests
that fail as described above.
2. Added an environment variable called NC_VLEN_NOTEST.
If set, then those specific tests are suppressed.
This should mean that the --disable-utilities option to
./configure should not need to be set to get a memory leak clean
build. This should allow for detection of any new leaks.
Note: I used an environment variable rather than a ./configure
option to control the vlen tests. This is because it is
temporary (I hope) and because it is a bit tricky for shell
scripts to access ./configure options.
Finally, as before, this only been tested with netcdf-4 and hdf5 support.
re: https://github.com/Unidata/netcdf-c/issues/1154
Inadvertently, the behavior of NC_DISKLESS with nc_create() was
changed in release 4.6.1. Previously, the NC_WRITE flag needed
to be explicitly used with NC_DISKLESS in order to cause the
created file to be persisted to disk.
Additional analyis indicated that the current NC_DISKLESS
implementation was seriously flawed.
This PR attempts to clean up and regularize the situation with
respect to NC_DISKLESS control. One important aspect of diskless
operation is that there are two different notions of write.
1. The file is read-write vs read-only when using the netcdf API.
2. The file is persisted or not to disk at nc_close().
Previously, these two were conflated. The rules now are
as follows.
1. NC_DISKLESS + NC_WRITE means that the file is read/write using the netcdf API
2. NC_DISKLESS + NC_PERSIST means that the file is persisted to a disk file at nc_close.
3. NC_DISKLESS + NC_PERSIST + NC_WRITE means both 1 and 2.
The NC_PERSIST flag is new and takes over the obsolete NC_MPIPOSIX flag.
NC_MPIPOSIX is still defined, but is now an alias for the NC_MPIIO flag.
It is also now the case that for netcdf-4, NC_DISKLESS is independent
of NC_INMEMORY and in fact it is an error to specify both flags
simultaneously.
Finally, the MMAP code was fixed to use NC_PERSIST as well.
Also marked MMAP as deprecated.
Also added a test case to test various combinations of NC_DISKLESS,
NC_PERSIST, and NC_WRITE.
This PR affects a number of files and especially test cases
that used NC_DISKLESS.
Misc. Unrelated fixes
1. fixed some warnings in ncdump/dumplib.c
re: issue https://github.com/Unidata/netcdf-c/issues/1156
Starting with HDF5 version 1.10.x, the plugin code MUST be
careful when using the standard *malloc()*, *realloc()*, and
*free()* function.
In the event that the code is allocating, reallocating, or
free'ing memory that either came from -- or will be exported to --
the calling HDF5 library, then one MUST use the corresponding
HDF5 functions *H5allocate_memory()*, *H5resize_memory()*,
*H5free_memory()* [5] to avoid memory failures.
Additionally, if your filter code leaks memory, then the HDF5 library
generates a failure something like this.
````
H5MM.c:232: H5MM_final_sanity_check: Assertion `0 == H5MM_curr_alloc_bytes_s' failed.
````
This PR modifies the code in the plugins directory to
conform to these new requirements.
This raises a question about the libhdf5 code where this
same problem may occur. We need to scan especially nc4hdf.c
to look for this problem.
re: issue https://github.com/Unidata/netcdf-c/issues/1151
Modify DAP2 and DAP4 code to handle case when _FillValue type is not
same as the parent variable type.
Specifically:
1. Define a parameter [fillmismatch] to allow this mismatch;
default is to disallow.
2. If allowed, forcibly change the type of the _FillValue to match
the parent variable.
3. If allowed Convert the values to match new type
4. Generate a log message
5. if not allowed, then fail
Implementing this required some changes to ncdap_test/dapcvt.c
Also added test cases.
Minor Unrelated Changes:
1. There were a number of warnings about e.g.
assigning a const char* to a char*. Fix these
2. In nccopy.1, replace .NP with .IP "n"
(re PR https://github.com/Unidata/netcdf-c/pull/1144)
3. fix minor error in ncdump/ocprint
re: https://github.com/Unidata/netcdf-c/issues/972
The current szip plugin code in the HDF5 library has some
unexpected behaviors that require some changes to how
nc_inq_var_szip is implemented and to the corresponding tests:
nc_test4/{test_szip,tst_vars3}.
Specifically, the following can happen:
1. The number of parameters provided by the user will be two,
but the number of parameters returned by nc_inq_var_filter
will be four because the HDF5 code (H5Zszip) will add two
extra parameters for internal use. It turns out that the two
parameters provided when calling nc_def_var_filter correspond
to the first two parameters of the four parameters returned
by nc_inq_var_filter.
2. The nc_inq_var_szip values corresponding to the ones provided
by the caller may be different than those provided by
nc_def_var_filter. The value of the options_mask argument is
known to add additional flag bits, and the pixels_per_block
parameter may be modified.
re: github issue https://github.com/Unidata/netcdf-c/issues/1111
One of the less common use cases for the in-memory feature is
apparently failing with HDF5-1.10.x. The fix is complicated and
requires significant changes to libhdf5/nc4memcb.c. The current
setup is detailed in the file docs/inmeminternal.dox.
Additionally, it was discovered that the program
nc_test/tst_inmemory.c, which is invoked by
nc_test/run_inmemory.sh, actually was failing because of the
above problem. But the failure is not detected since the script
does not return non-zero value.
Other Changes:
1. Fix nc_test_tst_inmemory to return errors correctly.
2. Make ncdap_tests/findtestserver.c and dap4_tests/findtestserver4.c
be generated from ncdap_test/findtestserver.c.in.
3. Make LOG() print output to stderr instead of stdout to
avoid contaminating e.g. ncdump output.
4. Modify the handling of NC_INMEMORY and NC_DISKLESS flags
to properly handle that NC_DISKLESS => NC_INMEMORY. This
affects a number of code pieces, especially memio.c.
Add the ability to set some additional curlopt values via .daprc (aka .dodsrc).
This effects both DAP2 and DAP4 protocols.
Related issues:
[1] re: esupport: KOZ-821332
[2] re: github issue https://github.com/Unidata/netcdf4-python/issues/836
[3] re: github issue https://github.com/Unidata/netcdf-c/issues/1074
1. CURLOPT_BUFFERSIZE: Relevant to [1]. Allow user to set the read/write
buffersizes used by curl.
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.READ.BUFFERSIZE=n
where n is the buffersize in bytes. There is a built-in (to curl)
limit of 512k for this value.
2. CURLOPT_TCP_KEEPALIVE (and CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL):
Relevant (maybe) to [2] and [3]. Allow the user to turn on KEEPALIVE
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.KEEPALIVE=on|n/m
If the value is "on", then simply enable default KEEPALIVE. If the value
is n/m, then enable KEEPALIVE and set KEEPIDLE to n and KEEPINTVL to m.
stored in the _NCProperties attribute to allow two things:
1. capture of additional library dependencies (over and above
hdf5)
2. Recognition of non-netcdf libraries that create netcdf-4 format
files.
To this end, the _NCProperties format has been extended to be
and arbitrary set of key=value pairs separated by commas.
This new format has version = 2, and uses commas as the pair separator.
Thus the general form is:
_NCProperties = "version=2,key1=value,key2=value2..." ;
This new version is accompanied by a new ./configure option of the form
--with-ncproperties="key1=value1,key2=value2..."
that specifies pairs to add to the _NCProperties attribute for all
files created with that netcdf library.
At this point, what is missing is some programmatic way to
specify either all the pairs or additional pairs
to the _NCProperties attribute. Not sure of the best way
to do this.
Builders using non-netcdf libraries can specify
whatever they want in the key value pairs (as long
as the version=2 is specified first).
By convention, the primary library is expected to be the
the first pair after the leading version=2 pair, but this
is convention only and is neither required nor enforced.
Related changes:
1. Fixed the tests that check _NCProperties to properly operate with version=2.
2. When reading a version 1 _NCProperties attribute, convert it to look
like a version 2 attribute.
2. Added some version 2 tests to ncdump/tst_fileinfo.c and
ncdump/tst_fileinfo.sh
Misc Changes:
1. Fix minor problem in ncdap_test/testurl.sh where a parameter to
buildurl needed to be quoted.
2. Minor fix to ncgen to swap switches -H and -h to be consistent
with other utilities.
3. Document the -M flag in nccopy usage() and the nccopy man page.
4. Modify a test case to use the nccopy -M flag.
file with @internal. The equivalent can be faked using
the Doxygen ENABLED_SECTIONS mechanism. See docs/testserver.dox
to see how this is done. So I make --enable-internal-docs
also set ENABLED_SECTIONS = INTERNAL and then used it
in docs/testserver.dox to decide if it needs to be included.
in the docs directory.
1. Add a new internal document -- testserver.dox -- to describe
how to set up and maintain the dap test server.
2. It moves the internal documentation (internal.dox, indexing.dox,
and testserver.dox) to later in the documentation table of contents.
3. Cleanup the formatting of the internal documents.
4. Cleanup some minor doxygen issues in other files.
