re: esupport 31942
* Add a new set of remote tests based on using the opendap hyrax server
* Re-enable --enable-dap-remote-tests as default on
* Make it possible to query the DMR separate from the DAP
so that it is possible to delay reading data until it is actually
requested. This make things like ncdump -h much more efficient.
* Fix handling of <Map>s in DMRs.
* Fix some memory leaks
* Replace wholevar with more useful wholechunk optimization
* Add optimization to read multiple values at one time
* Replace NCDEFAULT_get/put_vars with native nczarr versions.
* Clarify chunk projection computations
* zdebdispatch.h
* Add more chunking test cases and re-enable run_chunkcases
* If !szip, then suppress deflate interference test
* Make H5Znoop(1) filter produce more information
* cleanup bzlib.c API
Primary Fixes:
* Add a whole variable optimization -- used in the rare case that nc_get/put_vara covers the whole of a variable and the variable has a single chunk.
* Fix chunking error when stride causes whole chunks to be skipped.
* Fix some memory leaks
* Add test cases
* Add one performance test to nczarr_test/. This uses the timer utils from unit_test: timer_utils.[ch].
* Move ncdumpchunks utility from ncdump to nczarr_test
Misc. Other Changes:
* Make check for aws libraries conditional on --enable-nczarr-s3
* Remove all but one bm tests from nczarr_test until they are working.
* Remove another dependency on HDF5 from supposedly non-HDF5 specific code; specifically hdf5_log_hdf5.
* Make the BAIL2 macro be hdf5 specific and replace elsewhere with an HDF5 independent equivalent.
* Move hdf5cache.c to libsrc4/nc4cache.c because it is used by nczarr.
* Modify unit_tests so that some of them are run even if using Windows.
* Misc. small bug fixes and refactors and memory leaks.
* Rename some conflicting tests for cmake.
* Attempted to make nc_perf work with cmake and failed.
Re: GH Issue https://github.com/Unidata/netcdf-c/issues/1900
Apparently the clock_gettime() function is not always available.
It is used in unit_test/tst_exhash.c and unit_test/tst_xcache.c.
To solve this, a number of things were changed:
* Move the timing code to a new file unit_tests/timer_utils.[ch]
* Modify the timing code to choose one of several timing methods
depending on availability. The prioritized order is as follows:
1. If Windows, use the QueryPerformanceCounter mechanism else
2. Use clock_gettime if available else
3. Use gettimeofday if available else
4. Use getrusage if available
Note that the resolution of 3 and 4 is less than 1 or 2.
Misc. Other Changes:
* Move the test in CMakeLists.txt that disables unit tests for WIN32 to unit_test/CMakeLists.txt since some unit tests actually work under Visual Studio.
* Fix some of the unit tests to work under visual studio
* Fix problem with using remove() in zmap_nzf.c
* Remove some warning about use of EXTERNL
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
re: Partly addresses issue https://github.com/Unidata/netcdf-c/issues/1712.
1. Turn on Hyrax Hack to accept Hyrax style attribute containers.
2. Support Url type as alias for String.
3. Accept the special attribute, "__DAP4_Checksum_CRC32",
to control per-variable checksums.
4. Make _DAP4_xxx attributes be reserved and only accessible
by name (ala _SuperBlock attribute).
5. Fix handling of checksums. There is a hack in the code
that uses an extra flag in the chunk header to indicate
that all variables have checksums. This violates the spec
and will be removed once it is possible to regenerate the
test cases.
Note that checksumming with the Hyrax test server has not
been tested. This, along with some other probable inconsistencies,
needs fixing when OPeNDAP and Unidata can agree on the proper
specification. Testing will be included.
re: https://github.com/Unidata/netcdf-c/issues/1451
The situation with the various DAP (and other) remote test
servers is currently in a state of flux. For example, Unidata
admin is planning to forcibly shift the remote test server to
remotetest.unidata.ucar.edu soon. In addition, the server
test.opendap.org has shown some recent instability.
The result is that various DAP (and byterange) tests can fail
unexpectedly. This is an irritant to users and reveals nothing
about test sucess or failure.
Solve by modifying tests to report server inaccessibility and
otherwise pretend to succeed.
This puts an onus on Unidata to detect such server failures, but
will not cause users to see spurious failures. [Note. Do similar
fix for netcdf-java]. The check is:
1. export SETX=1 to cause all the shell scripts to trace
2. search the log files for the phrase "WARNING" (in upper case)
and see if it is complaining about not finding a server.
Misc. Changes
-------------
1. Added a pingurl program to see if a server was up.
2. modified some test case url targets
Primary fixes to get -ansi to work.
1. Convert all '//' C++ style comments to /*...*/ or to use #if 0...#endif
2. It turns out that when -ansi is specified, then a number of
functions no longer are defined in the header -- but they are still
in the .so file.<br>
The big example is strdup(). So, added code to include/ncconfig.h to define
externs for those missing functions that occur in more than one place.
These are enabled if !_WIN32 && __STDC__ == 1 (__STDC__ is supposed to
be the equivalent compile time flag to -ansi). Note that this requires
config.h (which references ncconfig.h) to be included in files where it is
currently not included. Single uses will be only in the file that uses them.
3. Added mmap test for the MAP_ANONYMOUS flag to configure.ac. Apparently
this is not always defined with -ansi.
4. fix some large integer constants in nc_test4/tst_atts3.c and nc_test4/tst_filterparser.c
to avoid compiler complaints.
5. fix a double constant in nc_test4/tst_filterparser.c to avoid compiler complaints.
[Note I suspect #4 and #5 will be a problem on big-endian machines, but we have no way to test]
Misc. Changes:
1. convert more instances of _MSC_VER to _WIN32.
2. added some debugging code to include/nctestserver.h
3. added comment about libdispatch/drc.c always being compiled.
4. modify parser generation in ncgen to remove unneeded files.
This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173
Sorry that it is so big, but leak suppression can be complex.
This PR fixes all remaining memory leaks -- as determined by
-fsanitize=address, and with the exceptions noted below.
Unfortunately. there remains a significant leak that I cannot
solve. It involves vlens, and it is unclear if the leak is
occurring in the netcdf-c library or the HDF5 library.
I have added a check_PROGRAM to the ncdump directory to show the
problem. The program is called tst_vlen_demo.c To exercise it,
build the netcdf library with -fsanitize=address enabled. Then
go into ncdump and do a "make clean check". This should build
tst_vlen_demo without actually executing it. Then do the
command "./tst_vlen_demo" to see the output of the memory
checker. Note the the lost malloc is deep in the HDF5 library
(in H5Tvlen.c).
I am temporarily working around this error in the following way.
1. I modified several test scripts to not execute known vlen tests
that fail as described above.
2. Added an environment variable called NC_VLEN_NOTEST.
If set, then those specific tests are suppressed.
This should mean that the --disable-utilities option to
./configure should not need to be set to get a memory leak clean
build. This should allow for detection of any new leaks.
Note: I used an environment variable rather than a ./configure
option to control the vlen tests. This is because it is
temporary (I hope) and because it is a bit tricky for shell
scripts to access ./configure options.
Finally, as before, this only been tested with netcdf-4 and hdf5 support.
https://github.com/Unidata/netcdf-c/issues/1168https://github.com/Unidata/netcdf-c/issues/1163https://github.com/Unidata/netcdf-c/issues/1162
This PR partially fixes memory leaks in the netcdf-c library,
in the ncdump utility, and in some test cases.
The netcdf-c library now runs memory clean with the assumption
that the --disable-utilities option is used. The primary remaining
problem is ncgen. Once that is fixed, I believe the netcdf-c library
will run memory clean with no limitations.
Notes
-----------
1. Memory checking was performed using gcc -fsanitize=address.
Valgrind-based testing has yet to be performed.
2. The pnetcdf, hdf4, and examples code has not been tested.
Misc. Non-leak changes
1. Make tst_diskless2 only run when netcdf4 is enabled (issue 1162)
2. Fix CmakeLists.txt to turn off logging if ENABLE_NETCDF_4 is OFF
3. Isolated all my debug scripts into a single top-level directory
called debug
4. Fix some USE_NETCDF4 dependencies in nc_test and nc_test4 Makefile.am
re: issue https://github.com/Unidata/netcdf-c/issues/1151
Modify DAP2 and DAP4 code to handle case when _FillValue type is not
same as the parent variable type.
Specifically:
1. Define a parameter [fillmismatch] to allow this mismatch;
default is to disallow.
2. If allowed, forcibly change the type of the _FillValue to match
the parent variable.
3. If allowed Convert the values to match new type
4. Generate a log message
5. if not allowed, then fail
Implementing this required some changes to ncdap_test/dapcvt.c
Also added test cases.
Minor Unrelated Changes:
1. There were a number of warnings about e.g.
assigning a const char* to a char*. Fix these
2. In nccopy.1, replace .NP with .IP "n"
(re PR https://github.com/Unidata/netcdf-c/pull/1144)
3. fix minor error in ncdump/ocprint
re: github issue https://github.com/Unidata/netcdf-c/issues/1111
One of the less common use cases for the in-memory feature is
apparently failing with HDF5-1.10.x. The fix is complicated and
requires significant changes to libhdf5/nc4memcb.c. The current
setup is detailed in the file docs/inmeminternal.dox.
Additionally, it was discovered that the program
nc_test/tst_inmemory.c, which is invoked by
nc_test/run_inmemory.sh, actually was failing because of the
above problem. But the failure is not detected since the script
does not return non-zero value.
Other Changes:
1. Fix nc_test_tst_inmemory to return errors correctly.
2. Make ncdap_tests/findtestserver.c and dap4_tests/findtestserver4.c
be generated from ncdap_test/findtestserver.c.in.
3. Make LOG() print output to stderr instead of stdout to
avoid contaminating e.g. ncdump output.
4. Modify the handling of NC_INMEMORY and NC_DISKLESS flags
to properly handle that NC_DISKLESS => NC_INMEMORY. This
affects a number of code pieces, especially memio.c.
Add the ability to set some additional curlopt values via .daprc (aka .dodsrc).
This effects both DAP2 and DAP4 protocols.
Related issues:
[1] re: esupport: KOZ-821332
[2] re: github issue https://github.com/Unidata/netcdf4-python/issues/836
[3] re: github issue https://github.com/Unidata/netcdf-c/issues/1074
1. CURLOPT_BUFFERSIZE: Relevant to [1]. Allow user to set the read/write
buffersizes used by curl.
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.READ.BUFFERSIZE=n
where n is the buffersize in bytes. There is a built-in (to curl)
limit of 512k for this value.
2. CURLOPT_TCP_KEEPALIVE (and CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL):
Relevant (maybe) to [2] and [3]. Allow the user to turn on KEEPALIVE
This is done by adding the following to .daprc (aka .dodsrc):
HTTP.KEEPALIVE=on|n/m
If the value is "on", then simply enable default KEEPALIVE. If the value
is n/m, then enable KEEPALIVE and set KEEPIDLE to n and KEEPINTVL to m.
So it now becomes the first default test server to try.
This also means that the dap4 remote testing is enabled.
The only issue to watch is to see if the jetstream-based
server can stay up for significant periods of time.
A uptimerobot (https://uptimerobot.com) has been set ups
to monitor this hourly, so we shall see.
strlcat provides better protection against buffer overflows.
Code is taken from the FreeBSD project source code. Specifically:
https://github.com/freebsd/freebsd/blob/master/lib/libc/string/strlcat.c
License appears to be acceptable, but needs to be checked by e.g. Debian.
Step 1:
1. Add to netcdf-c/include/ncconfigure.h to use our version
if not already available as determined by HAVE_STRLCAT in config.h.
2. Add the strlcat code to libdispatch/dstring.c
3. Turns out that strlcat was already defined in several places.
So remove it from:
ncgen3/genlib.c
ncdump/dumplib.c
3. Define strlcat extern definition in ncconfigure.h.
4. Modify following directories to use strlcat:
libdap2 libdap4 ncdap_test dap4_test
Will do others in subsequent steps.
2. Factored out the parameter string parsing for ncgen and nccopy
int libdispatch/dfilter.c + include/ncfilter.h
3. Allow a parameter string to use constant types other than
unsigned int. See docs/filters.md for details.
4. Moved the old content of include/netcdf_filter.h into include/netcdf.h
and removed include/netcdf_filter.h as no longer needed.
5. Force the test filter (bzip2) in nc_test4/filter_test to
be built using BUILT_SOURCES.
dap code will create a real temporary file in which to store the
converted metadata for the DAP .dds or .dmr.
It was assumed that the nc_close code would reclaim the
temporary file. For DAP2, reclamation occurs in the ncio
code. For DAP4, it was assumed that the libsrc4 code would do
the reclamation, but for whatever reason, this is not happening.
Thus, in this situation, a temporary file is left in the file
system. Aside from being irritating to users, this screws up
'make distcheck'.
So the DAP4 code is fixed to ensure that the temporary file is
properly reclaimed independent of the libsrc4 code.
or seq fields is not a well-defined concept. So
for now, I am disallowing them. Required
updating a number of test files in
dap4_test. This is tagged by the line
#undef ALLOWFIELDMAPS
in ./libdap4/ncd4types.h. This should
affect only dap4 and nothing else.
1. When running under windows (as opposed to cygwin)
we need to make sure to not user /cygdrive/ file paths.
This was ocurring in libdap4/d4read.c, but may occur
elsewhere.
2. Shell scripts in the git repo are not being checked-out
with the executable mode set. Had core.filemode set to false.
Was a major hassle to fix.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
