re: issue https://github.com/Unidata/netcdf-c/issues/1278
re: issue https://github.com/Unidata/netcdf-c/issues/876
re: issue https://github.com/Unidata/netcdf-c/issues/806
* Major change to the handling of 8-byte parameters for nc_def_var_filter.
The old code was not well thought out.
* The new algorithm is documented in docs/filters.md.
* Added new utility file plugins/H5Zutil.c to support
* Modified plugins/H5Zmisc.c to use new algorithm
the new algorithm.
* Renamed include/ncfilter.h to include/netcdf_filter.h
and made it an installed header so clients can access the
new algorithm utility.
* Fixed nc_test4/tst_filterparser.c and nc_test4/test_filter_misc.c
to use the new algorithm
* libdap4/ fixes:
* d4swap.c has an error in the endian pre-processing such
that record counts were not being swapped correctly.
* d4data.c had an error in that checksums were being computed
after endian swapping rather than before.
* ocinitialize() was never being called, so xxdr bigendian handling
was never set correctly.
* Required adding debug statements to occompile
* Found and fixed memory leak in ncdump.c
Not tested:
* HDF4
* Pnetcdf
* parallel HDF5
re: issue https://github.com/Unidata/netcdf-c/issues/1251
Assume that you have the URL to a remote dataset
which is a normal netcdf-3 or netcdf-4 file.
This PR allows the netcdf-c to read that dataset's
contents as a netcdf file using HTTP byte ranges
if the remote server supports byte-range access.
Originally, this PR was set up to access Amazon S3 objects,
but it can also access other remote datasets such as those
provided by a Thredds server via the HTTPServer access protocol.
It may also work for other kinds of servers.
Note that this is not intended as a true production
capability because, as is known, this kind of access to
can be quite slow. In addition, the byte-range IO drivers
do not currently do any sort of optimization or caching.
An additional goal here is to gain some experience with
the Amazon S3 REST protocol.
This architecture and its use documented in
the file docs/byterange.dox.
There are currently two test cases:
1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle
for a remote netcdf-3 file and a remote netcdf-4 file.
2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote
datasets.
This PR also incorporates significantly changed model inference code
(see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259).
1. It centralizes the code that infers the dispatcher.
2. It adds support for byte-range URLs
Other changes:
1. NC_HDF5_finalize was not being properly called by nc_finalize().
2. Fix minor bug in ncgen3.l
3. fix memory leak in nc4info.c
4. add code to walk the .daprc triples and to replace protocol=
fragment tag with a more general mode= tag.
Final Note:
Th inference code is still way too complicated. We need to move
to the validfile() model used by netcdf Java, where each
dispatcher is asked if it can process the file. This decentralizes
the inference code. This will be done after all the major new
dispatchers (PIO, Zarr, etc) have been implemented.
https://github.com/Unidata/netcdf-c/issues/1168https://github.com/Unidata/netcdf-c/issues/1163https://github.com/Unidata/netcdf-c/issues/1162
This PR partially fixes memory leaks in the netcdf-c library,
in the ncdump utility, and in some test cases.
The netcdf-c library now runs memory clean with the assumption
that the --disable-utilities option is used. The primary remaining
problem is ncgen. Once that is fixed, I believe the netcdf-c library
will run memory clean with no limitations.
Notes
-----------
1. Memory checking was performed using gcc -fsanitize=address.
Valgrind-based testing has yet to be performed.
2. The pnetcdf, hdf4, and examples code has not been tested.
Misc. Non-leak changes
1. Make tst_diskless2 only run when netcdf4 is enabled (issue 1162)
2. Fix CmakeLists.txt to turn off logging if ENABLE_NETCDF_4 is OFF
3. Isolated all my debug scripts into a single top-level directory
called debug
4. Fix some USE_NETCDF4 dependencies in nc_test and nc_test4 Makefile.am
Fix https://github.com/Unidata/netcdf-c/issues/962
1. remove the --disable-diskless option since it is no
longer needed. Similarly for CMakeLists.txt.
2. Fixed nc4files.c where BAIL and return were mixed
leading to situation where cleanup code was not
being invoked. This probably occurs elsewhere,
but I did not find any specifically.
The file docs/indexing.dox tries to provide design
information for the refactoring.
The primary change is to replace all walking of linked
lists with the use of the NCindex data structure.
Ncindex is a combination of a hash table (for name-based
lookup) and a vector (for walking the elements in the index).
Additionally, global vectors are added to NC_HDF5_FILE_INFO_T
to support direct mapping of an e.g. dimid to the NC_DIM_INFO_T
object. These global vectors exist for dimensions, types, and groups
because they have globally unique id numbers.
WARNING:
1. since libsrc4 and libsrchdf4 share code, there are also
changes in libsrchdf4.
2. Any outstanding pull requests that change libsrc4 or libhdf4
are likely to cause conflicts with this code.
3. The original reason for doing this was for performance improvements,
but as noted elsewhere, this may not be significant because
the meta-data read performance apparently is being dominated
by the hdf5 library because we do bulk meta-data reading rather
than lazy reading.
(I hope) metadata mechanism. This mostly just adds new pieces of
code (e.g. nclistmap) and does some minor fixes.
It should be transparent to everything else.
The next set of changes will be the big step.
2. Factored out the parameter string parsing for ncgen and nccopy
int libdispatch/dfilter.c + include/ncfilter.h
3. Allow a parameter string to use constant types other than
unsigned int. See docs/filters.md for details.
4. Moved the old content of include/netcdf_filter.h into include/netcdf.h
and removed include/netcdf_filter.h as no longer needed.
5. Force the test filter (bzip2) in nc_test4/filter_test to
be built using BUILT_SOURCES.
This relies on the HDF5 capability to
dynamically load compression filters.
Note that a compression filter is just
a subcase of filters.
The primary user-visible changes are as follows:
1. Add a standard header "netcdf_filter.h" that defines
the necessary API extensions
2. Modify ncgen to support two new special attributes
"_Filter_ID" and "_Filter_Parameters" so that compression
can be turned on when creating a file using ncgen.
4. Add a detailed description of filtering support
to the user's guide; see the file filters.md
5. Add a test case directory for this: nc_test4/filter_test.
It is fragile and a ./configure flags (-enable-filter-test)
is defined (default disabled) to shut this off this test
to avoid spurious 'make check' failures.
Note that the HDF5 documentation is not up-to-date, so
much of what is encoded here comes from examining the
actual code in the file H5PL.c in the HDF5 source code.
1. When running under windows (as opposed to cygwin)
we need to make sure to not user /cygdrive/ file paths.
This was ocurring in libdap4/d4read.c, but may occur
elsewhere.
2. Shell scripts in the git repo are not being checked-out
with the executable mode set. Had core.filemode set to false.
Was a major hassle to fix.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
Update utf8proc.[ch] to use the version now
maintained by the Julia Language project
(https://github.com/JuliaLang/utf8proc/blob/master/LICENSE.md).
The license for the previous version was
unacceptable for the Debian and Ubuntu release
systems. The new version both updates the code
and addresses the license issue.
It turns out that the utf8proc software we are using
was turned over to the Julia Language developers
and the license terms changed to allow modification.
(https://github.com/JuliaLang/utf8proc/blob/master/LICENSE.md).
So the fix here is as follows:
1. Wrap the library with a fixed interface: libdispatch/dutf8.c
and include/ncutf8.h.
2. Replace the existing utf8proc code with the new version
from https://github.com/JuliaLang/utf8proc.
3. Add a couple more test cases: nc_test/tst_utf8_validate.c
and nc_test_utf8_phrases.c. If/when I can find a usable
normalization test, I will incorporate that later.
contain as little file-type specific info as possible. It
modifies especially libsrc so that all of the netcdf-3 data
that used to be in struct NC is now kept in a separate chunk
of data pointed to by the struct NC. This makes all of
current protocols consistent: netcdf-3, netcdf-4, and dap.
The in-memory files can be made persistent if nc_create is called with
NC_DISKLESS|NC_WRITE flags set. Initial test case also included.
- Modified ncio mechanism to support
multiple ncio packages; this is so we
can have posixio and memio operating
at the same time.
- cleanup up a bunch of lint issues (unused variables, etc).
NCF-42: _Format attribute sometimes being ignored
NCF-43: Fixed unsigned long long parsing.
NCF-47: Make opendap code properly handle illegal names like "x.y" by
supressing them
NCF-49: check for uint type
NCF-50: properly handle username:pwd embedded in urls.
