re: https://github.com/zarr-developers/zarr-specs/issues/41
After discussions with the Zarr community, it was decided to
convert to a new representation of the NCZarr meta-data extensions: version 2.
These extensions store information necessary to mapping the Zarr data model
to the netcdf-4 data model.
The basic change is to remove the NCZarr specific objects: .nczarr, .nczgroup, .nczarray, and .nczattr.
The contents of these objects is moved into the corresponding existing Zarr objects as special keys. The mapping is as follows:
* ''.nczarr'' => ''/.zgroup/_NCZARR_SUPERBLOCK_''
* ''.nczgroup => ''.zgroup/_NCZARR_GROUP_''
* ''.nczarray => ''.zarray/_NCZARR_ARRAY_''
* ''.nczattr => ''.zattr/_NCZARR_ATTR_''
Backward compatibility is maintained by looking for the object ''/.nczarr''
and if found, then assuming that the dataset is in the older version 1 format.
This compatibility only supports reading of such version 1 datasets.
Documentation and test cases are also added.
Misc. Other Changes:
1. The json parsing code was added to the general library instead of nczarr only (ncjson.c, ncjson.h).
2. Improved support for different platform paths by allowing conversion
to a single common path representation.
3. Add some new error codes.
4. Modify nccopy usage to mention the new chunking specification.
This is a follow-on to pull request
````https://github.com/Unidata/netcdf-c/pull/1959````,
which fixed up type scoping.
The primary changes are to _nc\_inq\_dimid()_ and to ncdump.
The _nc\_inq\_dimid()_ function is supposed to allow the name to be
and FQN, but this apparently never got implemented. So if was modified
to support FQNs.
The ncdump program is supposed to output fully qualified dimension names
in its generated CDL file under certain conditions.
Suppose ncdump has a netcdf-4 file F with variable V, and V's parent group
is G. For each dimension id D referenced by V, ncdump needs to determine
whether to print its name as a simple name or as a fully qualified name (FQN).
The algorithm is as follows:
1. Search up the tree of ancestor groups.
2. If one of those ancestor groups contains the dimid, then call it dimgrp.
3. If one of those ancestor groups contains a dim with the same name as the dimid, but with a different dimid, then record that as duplicate=true.
4. If dimgrp is defined and duplicate == false, then we do not need an fqn.
5. If dimgrp is defined and duplicate == true, then we do need an fqn to avoid incorrectly using the duplicate.
6. If dimgrp is undefined, then do a preorder breadth-first search of all the groups looking for the dimid.
7. If found, then use the fqn of the first found such dimension location.
8. If not found, then fail.
Test case ncdump/test_scope.sh was modified to test the proper
operation of ncdump and _nc\_inq\_dimid()_.
Misc. Other Changes:
* Fix nc_inq_ncid (NC4_inq_ncid actually) to return root group id if the name argument is NULL.
* Modify _ncdump/printfqn_ to print out a dimid FQN; this supports verification that the resulting .nc files were properly created.
re: Github issue https://github.com/Unidata/netcdf-c/issues/1956
The function NC_compare_nc_types in libdispatch/dcopy.c uses an
incorrect algorithm to search for types. The core of this is the
function NC_rec_find_nc_type in libdispatch/dcopy.c. Currently
it searchs the current group and its subtree.
Additionally, the function NC4_inq_typeid in libsrc4/nc4internal.c
has been extended to handle fully qualified names. It was originally
designed to do this, but for some reason never completed.
The NC_rec_find_nc_type algorithm has been altered to match the
algorithm used by NC4_inq_typeid. It operates as follows.
Given a file F, group G and a type T. It searches file F2, group
G2, for another type T2 that is equivalent to T.
The search order is as follows.
1. Search G2 for a type T2 equivalent to T.
2. Search upwards in the ancestor groups of G2 for a type T2 equivalent to T.
3. Search the complete group tree of F2 in pre-order, breadth-first order to locate T2 equivalent to T.
Also add a test case to validate algorithm: ncdump/test_scope.sh.
Note, this change may cause compatibility problems, though it is
unlikely because two different equivalent type declarations in
one dataset is unlikely.
The XArray implementation that uses Zarr for storage
provides a mechanism to simulate named dimensions.
It does this by adding a per-variable attribute called
_ARRAY_DIMENSIONS. This attribute contains a list of names
to be matched against the shape values of the variable.
In effect a named dimension is created with the name
_ARRAY_DIMENSIONS(i) and length shape(i) for all i
in range 0..rank(variable).
Both read and write support is provided.
This XArray support is only invoked if the mode value
of "xarray" is defined. So for example, as in this URL.
````
https://s3.us-west-1.amazonaws.com/bucket/dataset#mode=nczarr,xarray,s3
````
Note that the "xarray" mode flag also implies mode flag "zarr", so the above
is equivalent to this URL.
````
https://s3.us-west-1.amazonaws.com/bucket/dataset#mode=nczarr,zarr,xarray,s3
````
The primary change to implement this was to unify the handling
of dimension references in libnczarr/zsync.
A test for this and other pure-zarr features was added as
nczarr_test/run_purezarr.sh
Other changes:
* Make sure distcheck leaves no files around.
* Change the special attribute flag DIMSCALEFLAG to HIDDENATTRFLAG
to support the xarray attribute.
* Annotate the zmap implementations with feature flags such as
WRITEONCE (for zip files).
Primary Fixes:
* Add a whole variable optimization -- used in the rare case that nc_get/put_vara covers the whole of a variable and the variable has a single chunk.
* Fix chunking error when stride causes whole chunks to be skipped.
* Fix some memory leaks
* Add test cases
* Add one performance test to nczarr_test/. This uses the timer utils from unit_test: timer_utils.[ch].
* Move ncdumpchunks utility from ncdump to nczarr_test
Misc. Other Changes:
* Make check for aws libraries conditional on --enable-nczarr-s3
* Remove all but one bm tests from nczarr_test until they are working.
* Remove another dependency on HDF5 from supposedly non-HDF5 specific code; specifically hdf5_log_hdf5.
* Make the BAIL2 macro be hdf5 specific and replace elsewhere with an HDF5 independent equivalent.
* Move hdf5cache.c to libsrc4/nc4cache.c because it is used by nczarr.
* Modify unit_tests so that some of them are run even if using Windows.
* Misc. small bug fixes and refactors and memory leaks.
* Rename some conflicting tests for cmake.
* Attempted to make nc_perf work with cmake and failed.
Primary changes:
* Add an improved cache system to speed up performance.
* Fix NCZarr to properly handle scalar variables.
Misc. Related Changes:
* Added unit tests for extendible hash and for the generic cache.
* Add config parameter to set size of the NCZarr cache.
* Add initial performance tests but leave them unused.
* Add CRC64 support.
* Move location of ncdumpchunks utility from /ncgen to /ncdump.
* Refactor auth support.
Misc. Unrelated Changes:
* More cleanup of the S3 support
* Add support for S3 authentication in .rc files: HTTP.S3.ACCESSID and HTTP.S3.SECRETKEY.
* Remove the hashkey from the struct OBJHDR since it is never used.
re: https://github.com/Unidata/netcdf-c/issues/1836
Revert the internal filter code to simplify it. From the user's
point of view, the only visible changes should be:
1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h
2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter.
Internally,the dispatch table has been modified to get rid of the filter_actions
entry and associated complex structures. It has been replaced with
inq_var_filter_ids and inq_var_filter_info entries and the dispatch table
version has been bumped to 3. Corresponding NOOP and NOTNC4 functions
were added to libdispatch/dnotnc4.c. Also, the filter_action entries
in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2,
etc). This should only impact UDF users.
In the process, it became clear that the form of the filters
field in NC_VAR_INFO_T was format dependent, so I converted it to
be of type void* and pushed its management into the various dispatch
code bases. Specifically libhdf5 and libnczarr now manage the filters
field in their own way.
The auxilliary functions for parsing textual filter specifications
were moved to netcdf_aux.h and were renamed to the following:
* ncaux_h5filterspec_parse
* ncaux_h5filterspec_parselist
* ncaux_h5filterspec_free
* ncaux_h5filter_fix8
Misc. Other Changes:
1. Document NUG/filters.md updated to reflect the changes above.
2. All the old data types (structs and enums)
used by filter_actions actions were deleted.
The exception is the NC_H5_Filterspec because it is needed
by ncaux_h5filterspec_parselist.
3. Clientside filters were removed -- another enhancement
for which no-one ever asked.
4. The ability to remove filters was itself removed.
5. Some functionality needed by nczarr was moved from libhdf5
to libsrc4 e.g. nc4_find_default_chunksizes
6. All the filterx code was removed
7. ncfilter.h and nc4filter.c no longer used
Misc. Unrelated Changes:
1. The nczarr_test makefile clean was leaving some directories; so
add clean-local to take care of them.
re: Issue https://github.com/Unidata/netcdf-c/issues/1848
The existing Virtual File Driver built to support byte-range
read-only file access is quite old. It turns out to be extremely
slow (reason unknown at the moment).
Starting with HDF5 1.10.6, the HDF5 library has its own version
of such a file driver. The HDF5 developers have better knowledge
about building such a driver and what incantations are needed to
get good performance.
This PR modifies the byte-range code in hdf5open.c so
that if the HDF5 file driver is available, then it is used
in preference to the one written by the Netcdf group.
Misc. Other Changes:
1. Moved all of nc4print code to ncdump to keep appveyor quiet.
In case HDF5 adds more storage specifications, netcdf4 should be able to
cope with them by default. Further specializations could be added
nonetheless.
disengagement of enable-netcdf4 from enable-hdf5.
That is, with the advent of nczarr, it is possible
to turn off hdf5 but still need netcdf-4 enabled
because nczarr uses libsrc4, but not libhdf5.
This change involves a bunch of things:
1. Modify configure.ac and CMakelist to make enable_hdf5
control if hdf5 support is provided. For back compatibility,
disable-netcdf4 is treated as disable-hdf5. But internally,
netcdf4 support is controlled only by the enabling of formats
that require it.
2. In support of #1, modify .travis.yml to use enable/disable-hdf5
instead of enable/disable-netcdf4.
3. test_common.in is modified to track selected features,
including enable-hdf5 and enable-s3-tests. This is used in
selected tests that mix netcdf-3 and netcdf4 tests.
4. The conflation of USE_HDF5 and USE_NETCDF4 is common in
code, tests, and build files, so all of those had to be weeded out.
5. It turns out that some of the NC4_dim functions really are HDF5 specific,
but are not treated as such. So they are moved from nc4dim.c to
hdf5dim.c or hdf5dispatch.c
6. Some generic functions in libhdf5 can be (and were) moved to libsrc4.
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
The `error4.c` file is already listed in `libsrc4_SOURCES`, so does not need to be added again later. The file's contents are only compiled if `LOGGING` is defined, so is ok to always compile.
nc4internal.c contains code to free the format_XXX_info
fields. Since these are format specific, this code
was moved to the dispatch code (libhdf5 and libhdf4
in the current case).
Additionally, there are some fields in nc4internal.h (e.g.
dimscale fields) that are specific to HDF5 and have been moved
to the corresponding HDF5 data structures and code.
Misc. other changes:
1. NC_VAR_INFO_T->hdf5_name renamed to alt_name to avoid
implying it is necessarily HDF5 specific.
2. prefix NC_FILE_INFO_T with an instance of NC_OBJ for consistency.
this also requires wrapping move_in_NCList() to keep
hdr.id consistent.
re: https://github.com/Unidata/netcdf-c/issues/1584
Support has been added for multiple filters per variable. This
affects a number of components in netcdf. The new APIs are
documented in NUG/filters.md.
The primary changes are:
* A set of new functions are provided (see __include/netcdf_filter.h__).
- Obtain a list of the filters associated with a variable
- Obtain the parameters for a specific filter.
* The existing __nc_inq_var_filter__ function now returns info
about the first defined filter.
* The utilities (ncgen, ncdump, and nccopy) now support
an extended format for specifying a sequence of filters.
The general form is __<filter>|<filter>..._.
* The ncdump **_Filter** attribute now dumps a list of all the
filters associated with a variable using the above new format.
* Filter specifications can now use a filter name instead of number
for filters known to the netcdf library, which in turn is taken
from the HDF5 filter registration page.
* New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter
is returned if an attempt is made to access an unknown filter.
* Internally, the dispatch table has been extended to add a function
to handle all of the filter functions.
* New, filter-related, tests were added to nc_test4.
* A new plugin was added to the plugins directory to help with testing.
Notes:
1. The shuffle and fletcher32 filters are not part of the multifilter system.
Misc. changes:
1. A debug module was added to libhdf5 to help catch error locations.
re: https://github.com/Unidata/netcdf-c/issues/1373 (partial)
* Mark some global constants be const to indicate to make them easier to track.
* Hide direct access to the ncrc_globalstate behind a function call.
* Convert dispatch tables to constants (except the user defined ones)
This has some consequences in terms of function arguments needing to be marked
as const also.
* Remove some no longer needed global fields
* Aggregate all the globals in nclog.c
* Uniformly replace nc_sizevector{0,1} with NC_coord_{zero,one}
* Uniformly replace nc_ptrdffvector1 with NC_stride_one
* Remove some obsolete code
