re: PR https://github.com/Unidata/netcdf-c/pull/2492
re: Issue https://github.com/Unidata/netcdf-c/issues/2494
This PR fixes some problems with the pull request https://github.com/Unidata/netcdf-c/pull/2492 in response to Issue https://github.com/Unidata/netcdf-c/issues/2494.
* Found and fixed more scalar handling problems and add a test case for scalars.
* Cleanup nczarr_test/run_string.sh test
* Document *_nczarr_default_maxstrlen* and *_nczarr_maxstrlen*.
* Support both "Nan" and *Nan* as being floating point constants
for attributes. It is unclear from the Zarr V2 spec if
unquoted *Nan* is legal or not, but support for reading.
Write the quoted versions when writing an attribute. Similar
for Infinity constants.
So NCZarr supports the following constants for use in Attributes
* *Nan*, "Nan", *-Nan*, "-Nan"
* *Nanf*, "Nanf", *-Nanf*, "-Nanf"
* *Infinity*, "Infinity", *-Infinity*, "-Infinity"
* *Infinityf*, "Infinityf", *-Infinityf*, "-Infinityf"
* re: https://github.com/Unidata/netcdf-c/pull/2278
* re: https://github.com/Unidata/netcdf-c/issues/2485
* re: https://github.com/Unidata/netcdf-c/issues/2474
This PR subsumes PR https://github.com/Unidata/netcdf-c/pull/2278.
Actually is a bit an omnibus covering several issues.
## PR https://github.com/Unidata/netcdf-c/pull/2278
Add support for the Zarr string type.
Zarr strings are restricted currently to be of fixed size.
The primary issue to be addressed is to provide a way for user to
specify the size of the fixed length strings. This is handled by providing
the following new attributes special:
1. **_nczarr_default_maxstrlen** —
This is an attribute of the root group. It specifies the default
maximum string length for string types. If not specified, then
it has the value of 64 characters.
2. **_nczarr_maxstrlen** —
This is a per-variable attribute. It specifies the maximum
string length for the string type associated with the variable.
If not specified, then it is assigned the value of
**_nczarr_default_maxstrlen**.
This PR also requires some hacking to handle the existing netcdf-c NC_CHAR
type, which does not exist in zarr. The goal was to choose numpy types for
both the netcdf-c NC_STRING type and the netcdf-c NC_CHAR type such that
if a pure zarr implementation read them, it would still work and an
NC_CHAR type would be handled by zarr as a string of length 1.
For writing variables and NCZarr attributes, the type mapping is as follows:
* "|S1" for NC_CHAR.
* ">S1" for NC_STRING && MAXSTRLEN==1
* ">Sn" for NC_STRING && MAXSTRLEN==n
Note that it is a bit of a hack to use endianness, but it should be ok since for
string/char, the endianness has no meaning.
For reading attributes with pure zarr (i.e. with no nczarr
atribute types defined), they will always be interpreted as of
type NC_CHAR.
## Issue: https://github.com/Unidata/netcdf-c/issues/2474
This PR partly fixes this issue because it provided more
comprehensive support for Zarr attributes that are JSON valued expressions.
This PR still does not address the problem in that issue where the
_ARRAY_DIMENSION attribute is incorrectly set. Than can only be
fixed by the creator of the datasets.
## Issue: https://github.com/Unidata/netcdf-c/issues/2485
This PR also fixes the scalar failure shown in this issue.
It generally cleans up scalar handling.
It also adds a note to the documentation describing that
NCZarr supports scalars while Zarr does not and also how
scalar interoperability is achieved.
## Misc. Other Changes
1. Convert the nczarr special attributes and keys to be all lower case. So "_NCZARR_ATTR" now used "_nczarr_attr. Support back compatibility for the upper case names.
2. Cleanup my too-clever-by-half handling of scalars in libnczarr.
Filter support has three goals:
1. Use the existing HDF5 filter implementations,
2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr,
3. Allow filters to be used even when HDF5 is disabled
Detailed usage directions are define in docs/filters.md.
For now, the existing filter API is left in place. So filters
are defined using ''nc_def_var_filter'' using the HDF5 style
where the id and parameters are unsigned integers.
This is a big change since filters affect many parts of the code.
In the following, the terms "compressor" and "filter" and "codec" are generally
used synonomously.
### Filter-Related Changes:
* In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms.
* Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h.
* Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out.
* Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h.
* Add a number of new test to test the new nczarr filters.
* Let ncgen parse _Codecs attribute, although it is ignored.
### Plugin directory changes:
* Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file
* Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip
* Add a Codec defaulter (see docs/filters.md) for the big four filters.
* Make plugins work with windows by properly adding __declspec declaration.
### Misc. Non-Filter Changes
* Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5.
* Improve support for caching
* More fixes for path conversion code
* Fix misc. memory leaks
* Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath.
* Add a number of new test to test the non-filter fixes.
* Update the parsers
* Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32'
re: https://github.com/zarr-developers/zarr-specs/issues/41
After discussions with the Zarr community, it was decided to
convert to a new representation of the NCZarr meta-data extensions: version 2.
These extensions store information necessary to mapping the Zarr data model
to the netcdf-4 data model.
The basic change is to remove the NCZarr specific objects: .nczarr, .nczgroup, .nczarray, and .nczattr.
The contents of these objects is moved into the corresponding existing Zarr objects as special keys. The mapping is as follows:
* ''.nczarr'' => ''/.zgroup/_NCZARR_SUPERBLOCK_''
* ''.nczgroup => ''.zgroup/_NCZARR_GROUP_''
* ''.nczarray => ''.zarray/_NCZARR_ARRAY_''
* ''.nczattr => ''.zattr/_NCZARR_ATTR_''
Backward compatibility is maintained by looking for the object ''/.nczarr''
and if found, then assuming that the dataset is in the older version 1 format.
This compatibility only supports reading of such version 1 datasets.
Documentation and test cases are also added.
Misc. Other Changes:
1. The json parsing code was added to the general library instead of nczarr only (ncjson.c, ncjson.h).
2. Improved support for different platform paths by allowing conversion
to a single common path representation.
3. Add some new error codes.
4. Modify nccopy usage to mention the new chunking specification.
re: https://github.com/Unidata/netcdf-c/issues/2008
The fill_value key in a .zarray should have a single value,
but it currently has a value that is a 1 element array.
Fix is to pull out the single element.
This occurred because the fill_value is taken from the _FillValue attribute,
and all netcdf attributes are stored as arrays, of length 1 in this case.
In a related change, any attribute with length 1 is now stored in .zattrs
as a singleton rather than an array of length 1. This make the generated
Zarr more consistent with other Zarr implementations.
Misc. other changes:
1. Fix bug in testpathcvt caused by the way various shells handle backslash escapes.
2. Fix bug in testauth where test for MSVC is wrong.
re: github issue https://github.com/Unidata/netcdf-c/issues/1982
The problem was that the libnczarr/zsjon.c handling of strings with
embedded double quotes was wrong; a one line fix.
Also added a test case.
Misc. other changes:
1. I Discovered, en passant, that the handling of 64 bit constants
had an error that was fixed.
2. cleanup of the constant conversion code to recurse on arrays of values.
The XArray implementation that uses Zarr for storage
provides a mechanism to simulate named dimensions.
It does this by adding a per-variable attribute called
_ARRAY_DIMENSIONS. This attribute contains a list of names
to be matched against the shape values of the variable.
In effect a named dimension is created with the name
_ARRAY_DIMENSIONS(i) and length shape(i) for all i
in range 0..rank(variable).
Both read and write support is provided.
This XArray support is only invoked if the mode value
of "xarray" is defined. So for example, as in this URL.
````
https://s3.us-west-1.amazonaws.com/bucket/dataset#mode=nczarr,xarray,s3
````
Note that the "xarray" mode flag also implies mode flag "zarr", so the above
is equivalent to this URL.
````
https://s3.us-west-1.amazonaws.com/bucket/dataset#mode=nczarr,zarr,xarray,s3
````
The primary change to implement this was to unify the handling
of dimension references in libnczarr/zsync.
A test for this and other pure-zarr features was added as
nczarr_test/run_purezarr.sh
Other changes:
* Make sure distcheck leaves no files around.
* Change the special attribute flag DIMSCALEFLAG to HIDDENATTRFLAG
to support the xarray attribute.
* Annotate the zmap implementations with feature flags such as
WRITEONCE (for zip files).
The primary fix is to improve CMake build support.
Specific changes include:
* CMake: Provide a better soln to locating the AWS SDK
libraries; the new way is the preferred method as described in
the aws-cpp-sdk documentation.
* CMake (and Automake): allow -DENABLE_S3_SDK (default off) to suppress
looking for AWS libraries.
* CMake: add the complete set of nczarr tests
* CMake: add EXTERNL as needed to various .h files.
* Improve support for windows drive letters in paths.
* Add nczarr and s3 flags to nc-config
* For VisualStudio X nczarr, cleanup the NAN+INFINITY handling
* Convert _MSC_VER -> _WIN32 and vice versa as needed
* NCZarr - support multiple platform paths including windows, cygwin.
mingw, etc.
* NCZarr - sort the test outputs because different platforms
produce directory contents in different orders.
One big change concerns netcdf-c/CMakeLists.txt and netcdf-c/configure.ac.
In the current versions, it was the case that --disable-hdf5
disabled netcdf-4 (libsrc4). With nczarr, this can no longer
be the case because nczarr requires libsrc4 even if libhdf5
is disabled. So, I modified the above files to move the
format options (HDF5, NCZarr, HDF4, etc) to a single place
near the front of the files. Now it is the case that:
* Enabling any of the formats that require libsrc4
also does an implicit --enable-netcdf4.
* --disable-netcdf4 | --disable-netcdf-4 now becomes
and alias for --disable-hdf5.
There are probably some bugs in this change in terms of
dependencies between format options.
Problems:
* CMake S3 support is still not working for Visual Studio
* A recent issue points out that there is work to do on handling
UTF8 filenames, but that will be addressed in a separate fix.
Notes:
* Consider converting all of our includes/.h files to use EXTERNL
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
