re: Issue https://github.com/Unidata/netcdf-c/issues/2656
Charlie Zender notes that *nc_open()* does not immediately detect that the given path refers to a file not in zarr format. Rather it fails later when trying to read the (meta-)data.
The reason is that the Zarr format is highly decentralized. There is no easily testable magic number or superblock to look for. In effect the only way to see if a directory is Zarr is to successfully read it.
It is possible to heuristically detect that a path refers to an NCZarr/Zarr file by doing a breadth-first search of the file tree starting at the given path. If the search encounters a file whose name starts with ".z", then assume it is a legitimate NCZarr/Zarr file. Of course, this test could be costly. One hopes that in practice that it is not.
In addition to this fix, a corresponding test case was added.
## Other Changes
re: PR https://github.com/Unidata/netcdf-c/pull/2529
There was an error under Cygwin for this PR that is fixed in this PR. The fix was to convert all *noinst_* references to *check_*.
re: Issue
The byterange handling of the following URLS fails.
### Problem 1: "https://crudata.uea.ac.uk/cru/data/temperature/HadCRUT.4.6.0.0.median.nc#mode=bytes"
It turns out that byterange in hdf5 has two possible targets: S3 and not-S3 (e.g. a thredds server or the crudata URL above). Each uses a different HDF5 Virtual File Driver (VFD).
I incorrectly set up the byterange code in libhdf5 so that it would choose one or the other of the two VFD's for any netcdf-c library build. The fix is to allow it to choose either one at run-time.
### Problem 2: "https://noaa-goes16.s3.amazonaws.com/ABI-L1b-RadF/2022/001/18/OR_ABI-L1b-RadF-M6C01_G16_s20220011800205_e20220011809513_c20220011809562.nc#mode=bytes,s3"
When given what appears to be an S3-related URL, the netcdf-c library code converts it into a canonical, so-called "path" format. In casing out the possible input URL formats, I missed the case where the host contains the bucket ("noaa-goes16"), but not the region. So the fix was to check for this case.
## Misc. Related Changes
1. Since S3 is used in more than just NCZarr, I changed the automake/cmake options to replace "--enable-nczarr-s3" with "--enable-s3", but keeping the former option as a synonym for the latter. This also entailed cleaning up libnetcdf.settings WRT S3 support
2. Added the above URLS as additional test cases
## Misc. Un-Related Changes
1. CURLOPT_PUT is deprecated in favor to CURLOPT_UPLOAD
2. Fix some minor warnings
## Open Problems
* Under Ubuntu, either libcrypto or aws-sdk-cpp has a memory leak.
re: Issue https://github.com/Unidata/netcdf-c/issues/2573
The file type inferencer in libdispatch/dinference.c has a simple
forward inference mechanism so that the occurrence of certain mode
values in a URL fragment implies inclusion of additional mode values.
This kind of inference is notorious for leading to cycles if not
careful. Unfortunately, this occurred in the one in dinference.c.
This was fixed by providing a more complicated, but more reliable inference
mechanism.
## Misc. Other Changes
* Found and fixed a couple of memory leaks.
* There is a recent problem in building HDF4 support on github actions. Fixed by using the internal HDF4 xdr capability.
* Some filter-related code was not being properly ifdef'd with ENABLE_NCZARRA_FILTERS.
Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555.
This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts*
to test several features:
1. Show that access over the Internet to servers using the DAP4 protocol works.
2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly.
4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable.
The test inputs (primarily *\*.nc* files) provided in the netcdf-c library
are also used by the DAP4 Test Server (aka d4ts) to present web access to a
collection of data files accessible via the DAP4 protocol and which can be
used for testing Internet access to a working server.
To be precise, this version of d4ts is currently in unmerged branches
of the *netcdf-java* and *tds* Github repositories and so are not actually
in the main repositories *yet*. However, the *d4ts.war* file was created
from that branch and used to populate the *remotetest.unidata.ucar.edu*
server
The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org)
and *thredds-test*. These will continue to remain disabled until
those servers can be fixed.
## Primary Changes
* Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers.
* Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process.
* Fix the *dap4_test/test_remote.sh* test script to match the current available test data.
* Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4].
## Misc. Unrelated Changes
* Remove a raft of warnings, especially in nc_test4/tst_quantize.c.
* Add some additional explanatory information to the NCZarr documentation.
* Cleanup some Doxygen errors in the docs file and reorder some files.
I was getting the following error while compiling:
```
netcdf-c/libnczarr/zutil.c:544:26: error: called object 'strlen' is not a function or function pointer
544 | if(dnamep) *dnamep = strdup(dname);
| ^~~~~~
netcdf-c/libnczarr/zutil.c:533:68: note: declared here
533 | ncz_nctype2dtype(nc_type nctype, int endianness, int purezarr, int strlen, char** dnamep)
| ~~~~^~~~~~
```
My interpretation is that strdup() is implemented as a macro
which calls strlen() the standard C function, and when that
macro is being substituted here the call to strlen tries
to "call" the integer variable named strlen.
Resolving this by renaming the integer variable to "len"
instead of "strlen", avoiding a conflict with a standard
C library function name.
re: Issue https://github.com/Unidata/netcdf-c/issues/2502
H/T Charlie Zender
* Fix NCZarr handling of endianness value NC_ENDIAN_NATIVE. This now matches how it is handled in libhdf5
* Fix NCZarr handling of char typed attribute with value "". This now matches how it is handled in libhdf5
* Add test for various char attribute values
* Change the mapping of NC_CHAR and NC_STRING to dtype; requires changing some test files also.
* Optimize the testing for NC_ENOTBUILT in NC_open.
* Turn off debugging left on accidentally
* Fix memory leak in tst_pnetcdf.c
* Fix blosc test
re: PR https://github.com/Unidata/netcdf-c/pull/2492
re: Issue https://github.com/Unidata/netcdf-c/issues/2494
This PR fixes some problems with the pull request https://github.com/Unidata/netcdf-c/pull/2492 in response to Issue https://github.com/Unidata/netcdf-c/issues/2494.
* Found and fixed more scalar handling problems and add a test case for scalars.
* Cleanup nczarr_test/run_string.sh test
* Document *_nczarr_default_maxstrlen* and *_nczarr_maxstrlen*.
* Support both "Nan" and *Nan* as being floating point constants
for attributes. It is unclear from the Zarr V2 spec if
unquoted *Nan* is legal or not, but support for reading.
Write the quoted versions when writing an attribute. Similar
for Infinity constants.
So NCZarr supports the following constants for use in Attributes
* *Nan*, "Nan", *-Nan*, "-Nan"
* *Nanf*, "Nanf", *-Nanf*, "-Nanf"
* *Infinity*, "Infinity", *-Infinity*, "-Infinity"
* *Infinityf*, "Infinityf", *-Infinityf*, "-Infinityf"
* re: https://github.com/Unidata/netcdf-c/pull/2278
* re: https://github.com/Unidata/netcdf-c/issues/2485
* re: https://github.com/Unidata/netcdf-c/issues/2474
This PR subsumes PR https://github.com/Unidata/netcdf-c/pull/2278.
Actually is a bit an omnibus covering several issues.
## PR https://github.com/Unidata/netcdf-c/pull/2278
Add support for the Zarr string type.
Zarr strings are restricted currently to be of fixed size.
The primary issue to be addressed is to provide a way for user to
specify the size of the fixed length strings. This is handled by providing
the following new attributes special:
1. **_nczarr_default_maxstrlen** —
This is an attribute of the root group. It specifies the default
maximum string length for string types. If not specified, then
it has the value of 64 characters.
2. **_nczarr_maxstrlen** —
This is a per-variable attribute. It specifies the maximum
string length for the string type associated with the variable.
If not specified, then it is assigned the value of
**_nczarr_default_maxstrlen**.
This PR also requires some hacking to handle the existing netcdf-c NC_CHAR
type, which does not exist in zarr. The goal was to choose numpy types for
both the netcdf-c NC_STRING type and the netcdf-c NC_CHAR type such that
if a pure zarr implementation read them, it would still work and an
NC_CHAR type would be handled by zarr as a string of length 1.
For writing variables and NCZarr attributes, the type mapping is as follows:
* "|S1" for NC_CHAR.
* ">S1" for NC_STRING && MAXSTRLEN==1
* ">Sn" for NC_STRING && MAXSTRLEN==n
Note that it is a bit of a hack to use endianness, but it should be ok since for
string/char, the endianness has no meaning.
For reading attributes with pure zarr (i.e. with no nczarr
atribute types defined), they will always be interpreted as of
type NC_CHAR.
## Issue: https://github.com/Unidata/netcdf-c/issues/2474
This PR partly fixes this issue because it provided more
comprehensive support for Zarr attributes that are JSON valued expressions.
This PR still does not address the problem in that issue where the
_ARRAY_DIMENSION attribute is incorrectly set. Than can only be
fixed by the creator of the datasets.
## Issue: https://github.com/Unidata/netcdf-c/issues/2485
This PR also fixes the scalar failure shown in this issue.
It generally cleans up scalar handling.
It also adds a note to the documentation describing that
NCZarr supports scalars while Zarr does not and also how
scalar interoperability is achieved.
## Misc. Other Changes
1. Convert the nczarr special attributes and keys to be all lower case. So "_NCZARR_ATTR" now used "_nczarr_attr. Support back compatibility for the upper case names.
2. Cleanup my too-clever-by-half handling of scalars in libnczarr.
re: Issue https://github.com/Unidata/netcdf-c/issues/2458
The above Github Issue revealed some bugs in the file netcdf-c/plugins/H5Zblosc.c. Fixed and added a testcase. Also discovered that the Blosc LZ sub-compressors do not work well with small datasets.
Misc. Other Change(s): I noticed that the file "dap4_test/baselinethredds/GOES16_CONUS_20170821_020218_0.47_1km_33.3N_91.4W.nc4.thredds" is still causing tar errors during "make distcheck", so I made some changes to do rename at test-time.
## Overwriting
I think I solved the file overwrite problem by doing light name
mangling of the shared library names. With this change the probabilty
is very small that installing our filter wrappers in a directory will
overwrite code produced by others.
## Default Install Location
I have setup the --with-plugin-dir option default to install in
the following locations in order of preference
1. If HDF5_PLUGIN_PATH is defined (at build time remember), then the last directory in that path will be where the filter wrapper shared libraries will be installed.
2. Otherwise the default is "/usr/local/hdf5/lib/plugin" (on *nix*) or "%ALLUSERSPROFILE%\\hdf5\\lib\\plugin" for Windows or Mingw.
Currently, --with-plugin-dir is disabled by default.
I should note that even if I enable it by default, installing
netcdf-c will still not run "out of the box" because the hypothetical
naive user will not know which compressor libraries need to be
pre-installed before netcdf is installed. Nor will that user have any
way to find out what needs to be installed.
re: https://github.com/Unidata/netcdf-c/issues/2338
re: https://github.com/Unidata/netcdf-c/issues/2294
In issue https://github.com/Unidata/netcdf-c/issues/2338,
Ed Hartnett suggested a better way to install filters to a user
defined location -- for Automake, anyway.
This PR implements that suggestion. It turns out to be more
complicated than it appears, so there are fair number of changes;
mostly to shell scripts. Most of the change is in plugins/Makefile.am.
NOTE: this PR still does NOT address the use of HDF5_PLUGIN_PATH
as the default; this turns out to be complex when dealing with NCZarr.
So this will be addressed in a subsequent post 4.9.0 PR.
## Misc. Changes
1. Record the occurrences of incomplete codecs in libnczarr so that
they can be included in _Codecs attribute correctly. This allows
users to see what missing filters are referenced in the Zarr file.
Primarily affects libnczarr/zfilter.[ch]. Also required creating a
new no-effect filter: H5Zunknown.c.
2. Move the unknown filter test to a separate test file.
3. Incorporates PR https://github.com/Unidata/netcdf-c/pull/2343
re: https://github.com/Unidata/netcdf-c/issues/2294
Ed Hartnett suggested that the netcdf library installation process
be extended to install the standard filters into a user specified
location. The user can then set HDF5_PLUGIN_PATH to that location.
This PR provides that capability using:
````
configure option: --with-plugin-dir=<absolute directory path>
cmake option: -DPLUGIN_INSTALL_DIR=<absolute directory path>
````
Currently, the following plugins are always installed, if
available: bzip2, zstd, blosc.
If NCZarr is enabled, then additional plugins are installed:
fletcher32, shuffle, deflate, szip.
Additionally, the necessary codec support is installed
for each of the above filters that is installed.
## Changes:
1. Cleanup handling of built-in bzip2.
2. Add documentation to docs/filters.md
3. Re-factor the NCZarr codec libraries
4. Add a test, although it can only be exercised after
the library is installed, so it cannot be used during
normal testing.
5. Cleanup use of HDF5_PLUGIN_PATH in the filter test cases.
A number of other packages that read/write Zarr insert
attributes whose value is a dictionary containing specialized
information. An example is the GDAL Driver convention (see
https://gdal.org/drivers/raster/zarr.html).
In order to handle such attributes, this PR enforces a special
convention. It applies to both pure Zarr an NCZarr format as
written by the netdf-c library.
The convention is as follows:
## Reading
Suppose an attribute is read from *.zattrs* and it has a JSON
value that is a a dictionary. In this case, the JSON dictionary
is converted to a string value. It then appears in the netcdf-c
API as if it is a character valued attribute of the same name,
and whose value is the "stringified" dictionary.
# Writing
Suppose an attribute is of type character and its *value* *looks like*
a JSON dictionary. In this case, it is parsed to JSON
and written as the value of the attribute in the NCZarr file.
Here the *value* is the concatenation of all the characters
in the attributes netcdf-c value.
The term "looks like" means that the *value*'s first character is
"{", its last value is "}", and it can be successfully parsed
by a JSON parser.
A test case, *nczarr_test/run_jsonconventions.sh* was also added.
## Misc. Unrelated Changes
1. Fix an error in nc_test4/tst_broken_files.c
2. Modify the internal JSON parser API.
3. Modify the nczarr_test/zisjson program is modified to support
this convention.
re: https://github.com/pydata/xarray/issues/6374
As a result of a discussion about Xarray (see above issue),
I decided to turn on the xarray convention for NCZarr datasets
where possible so that xarray can read a larger set of nczarr
generated datasets.
This causes the following changes:
* If the user wants to generate a pure zarr file, then the mode "zarr" must be explicitly used; it is no longer the case that "mode=xarray" or mode="noxarray"
implies "mode=zarr".
* It is still the case that "mode=noxarray" will turn off the XArray convention.
The following conditions will cause ''_ARRAY_DIMENSIONS'' to not be written.
* The variable is not in the root group,
* Any dimension referenced by the variable is not in the root group.
re: Discussion https://github.com/Unidata/netcdf-c/discussions/2214
The primary change is to support so-called "standard filters".
A standard filter is one that is defined by the following
netcdf-c API:
````
int nc_def_var_XXX(int ncid, int varid, size_t nparams, unsigned* params);
int nc_inq_var_XXXX(int ncid, int varid, int* usefilterp, unsigned* params);
````
So for example, zstandard would be a standard filter by defining
the functions *nc_def_var_zstandard* and *nc_inq_var_zstandard*.
In order to define these functions, we need a new dispatch function:
````
int nc_inq_filter_avail(int ncid, unsigned filterid);
````
This function, combined with the existing filter API can be used
to implement arbitrary standard filters using a simple code pattern.
Note that I would have preferred that this function return a list
of all available filters, but HDF5 does not support that functionality.
So this PR implements the dispatch function and implements
the following standard functions:
+ bzip2
+ zstandard
+ blosc
Specific test cases are also provided for HDF5 and NCZarr.
Over time, other specific standard filters will be defined.
## Primary Changes
* Add nc_inq_filter_avail() to netcdf-c API.
* Add standard filter implementations to test use of *nc_inq_filter_avail*.
* Bump the dispatch table version number and add to all the relevant
dispatch tables (libsrc, libsrcp, etc).
* Create a program to invoke nc_inq_filter_avail so that it is accessible
to shell scripts.
* Cleanup szip support to properly support szip
when HDF5 is disabled. This involves detecting
libsz separately from testing if HDF5 supports szip.
* Integrate shuffle and fletcher32 into the existing
filter API. This means that, for example, nc_def_var_fletcher32
is now a wrapper around nc_def_var_filter.
* Extend the Codec defaulting to allow multiple default shared libraries.
## Misc. Changes
* Modify configure.ac/CMakeLists.txt to look for the relevant
libraries implementing standard filters.
* Modify libnetcdf.settings to list available standard filters
(including deflate and szip).
* Add CMake test modules to locate libbz2 and libzstd.
* Cleanup the HDF5 memory manager function use in the plugins.
* remove unused file include//ncfilter.h
* remove tests for the HDF5 memory operations e.g. H5allocate_memory.
* Add flag to ncdump to force use of _Filter instead of _Deflate
or _Shuffle or _Fletcher32. Used for testing.
re: https://github.com/Unidata/netcdf-c/issues/2177
re: https://github.com/Unidata/netcdf-c/pull/2178
Provide get/set functions to store global data alignment
information and apply it when a file is created.
The api is as follows:
````
int nc_set_alignment(int threshold, int alignment);
int nc_get_alignment(int* thresholdp, int* alignmentp);
````
If defined, then for every file created opened after the call to
nc_set_alignment, for every new variable added to the file, the
most recently set threshold and alignment values will be applied
to that variable.
The nc_get_alignment function return the last values set by
nc_set_alignment. If nc_set_alignment has not been called, then
it returns the value 0 for both threshold and alignment.
The alignment parameters are stored in the NCglobalstate object
(see below) for use as needed. Repeated calls to nc_set_alignment
will overwrite any existing values in NCglobalstate.
The alignment parameters are applied in libhdf5/hdf5create.c
and libhdf5/hdf5open.c
The set/get alignment functions are defined in libsrc4/nc4internal.c.
A test program was added as nc_test4/tst_alignment.c.
## Misc. Changes Unrelated to Alignment
* The NCRCglobalstate type was renamed to NCglobalstate to
indicate that it represented more general global state than
just .rc data. It was also moved to nc4internal.h. This led
to a large number of small changes: mostly renaming. The
global state management functions were moved to nc4internal.c.
* The global chunk cache variables have been moved into
NCglobalstate. As warranted, other global state will be moved
as well.
* Some misc. problems with the nczarr performance tests were corrected.
re: PR https://github.com/Unidata/netcdf-c/pull/2088
re: PR https://github.com/Unidata/netcdf-c/pull/2130
replaces: https://github.com/Unidata/netcdf-c/pull/2140
Changes:
* Add NCZarr-specific quantize functions to the dispatch table.
* Copy (modified) quantize code from libhdf5 to NCZarr
* Add quantize invocation to zvar.c
* Add support for _QuantizeBitgroomNumberOfSignificantDigits
and _QuantizeGranularBitgroomNumberOfSignificantDigits to ncgen.
* Modify nc_test4/tst_quantize.c to allow it to be used both for hdf5
and for nczarr.
* Make dap4 properly handle quantize functions in dispatch table.
* Add quantize attribute support to ncgen.
Other changes:
* Caught and fixed some S3 problems
* Fixed some nczarr fillvalue problems.
* Fixed some nczarr cache problems.
* Cleanup some flaws in libdispatch/dinfermodel.c
* Allow byterange requests to S3 be readable by dinfermodel.c/check_file_type
* Remove the libnczarr ztracedispatch code (big change).
re: https://github.com/Unidata/netcdf-c/issues/541
re: https://github.com/Unidata/netcdf-c/issues/1208
re: https://github.com/Unidata/netcdf-c/issues/2078
re: https://github.com/Unidata/netcdf-c/issues/2041
re: https://github.com/Unidata/netcdf-c/issues/2143
For a long time, there have been known problems with the
management of complex types containing VLENs. This also
involves the string type because it is stored as a VLEN of
chars.
This PR (mostly) fixes this problem. But note that it adds new
functions to netcdf.h (see below) and this may require bumping
the .so number. These new functions can be removed, if desired,
in favor of functions in netcdf_aux.h, but netcdf.h seems the
better place for them because they are intended as alternatives
to the nc_free_vlen and nc_free_string functions already in
netcdf.h.
The term complex type refers to any type that directly or
transitively references a VLEN type. So an array of VLENS, a
compound with a VLEN field, and so on.
In order to properly handle instances of these complex types, it
is necessary to have function that can recursively walk
instances of such types to perform various actions on them. The
term "deep" is also used to mean recursive.
At the moment, the two operations needed by the netcdf library are:
* free'ing an instance of the complex type
* copying an instance of the complex type.
The current library does only shallow free and shallow copy of
complex types. This means that only the top level is properly
free'd or copied, but deep internal blocks in the instance are
not touched.
Note that the term "vector" will be used to mean a contiguous (in
memory) sequence of instances of some type. Given an array with,
say, dimensions 2 X 3 X 4, this will be stored in memory as a
vector of length 2*3*4=24 instances.
The use cases are primarily these.
## nc_get_vars
Suppose one is reading a vector of instances using nc_get_vars
(or nc_get_vara or nc_get_var, etc.). These functions will
return the vector in the top-level memory provided. All
interior blocks (form nested VLEN or strings) will have been
dynamically allocated.
After using this vector of instances, it is necessary to free
(aka reclaim) the dynamically allocated memory, otherwise a
memory leak occurs. So, the recursive reclaim function is used
to walk the returned instance vector and do a deep reclaim of
the data.
Currently functions are defined in netcdf.h that are supposed to
handle this: nc_free_vlen(), nc_free_vlens(), and
nc_free_string(). Unfortunately, these functions only do a
shallow free, so deeply nested instances are not properly
handled by them.
Note that internally, the provided data is immediately written so
there is no need to copy it. But the caller may need to reclaim the
data it passed into the function.
## nc_put_att
Suppose one is writing a vector of instances as the data of an attribute
using, say, nc_put_att.
Internally, the incoming attribute data must be copied and stored
so that changes/reclamation of the input data will not affect
the attribute.
Again, the code inside the netcdf library does only shallow copying
rather than deep copy. As a result, one sees effects such as described
in Github Issue https://github.com/Unidata/netcdf-c/issues/2143.
Also, after defining the attribute, it may be necessary for the user
to free the data that was provided as input to nc_put_att().
## nc_get_att
Suppose one is reading a vector of instances as the data of an attribute
using, say, nc_get_att.
Internally, the existing attribute data must be copied and returned
to the caller, and the caller is responsible for reclaiming
the returned data.
Again, the code inside the netcdf library does only shallow copying
rather than deep copy. So this can lead to memory leaks and errors
because the deep data is shared between the library and the user.
# Solution
The solution is to build properly recursive reclaim and copy
functions and use those as needed.
These recursive functions are defined in libdispatch/dinstance.c
and their signatures are defined in include/netcdf.h.
For back compatibility, corresponding "ncaux_XXX" functions
are defined in include/netcdf_aux.h.
````
int nc_reclaim_data(int ncid, nc_type xtypeid, void* memory, size_t count);
int nc_reclaim_data_all(int ncid, nc_type xtypeid, void* memory, size_t count);
int nc_copy_data(int ncid, nc_type xtypeid, const void* memory, size_t count, void* copy);
int nc_copy_data_all(int ncid, nc_type xtypeid, const void* memory, size_t count, void** copyp);
````
There are two variants. The first two, nc_reclaim_data() and
nc_copy_data(), assume the top-level vector is managed by the
caller. For reclaim, this is so the user can use, for example, a
statically allocated vector. For copy, it assumes the user
provides the space into which the copy is stored.
The second two, nc_reclaim_data_all() and
nc_copy_data_all(), allows the functions to manage the
top-level. So for nc_reclaim_data_all, the top level is
assumed to be dynamically allocated and will be free'd by
nc_reclaim_data_all(). The nc_copy_data_all() function
will allocate the top level and return a pointer to it to the
user. The user can later pass that pointer to
nc_reclaim_data_all() to reclaim the instance(s).
# Internal Changes
The netcdf-c library internals are changed to use the proper
reclaim and copy functions. It turns out that the places where
these functions are needed is quite pervasive in the netcdf-c
library code. Using these functions also allows some
simplification of the code since the stdata and vldata fields of
NC_ATT_INFO are no longer needed. Currently this is commented
out using the SEPDATA \#define macro. When any bugs are largely
fixed, all this code will be removed.
# Known Bugs
1. There is still one known failure that has not been solved.
All the failures revolve around some variant of this .cdl file.
The proximate cause of failure is the use of a VLEN FillValue.
````
netcdf x {
types:
float(*) row_of_floats ;
dimensions:
m = 5 ;
variables:
row_of_floats ragged_array(m) ;
row_of_floats ragged_array:_FillValue = {-999} ;
data:
ragged_array = {10, 11, 12, 13, 14}, {20, 21, 22, 23}, {30, 31, 32},
{40, 41}, _ ;
}
````
When a solution is found, I will either add it to this PR or post a new PR.
# Related Changes
* Mark nc_free_vlen(s) as deprecated in favor of ncaux_reclaim_data.
* Remove the --enable-unfixed-memory-leaks option.
* Remove the NC_VLENS_NOTEST code that suppresses some vlen tests.
* Document this change in docs/internal.md
* Disable the tst_vlen_data test in ncdump/tst_nccopy4.sh.
* Mark types as fixed size or not (transitively) to optimize the reclaim
and copy functions.
# Misc. Changes
* Make Doxygen process libdispatch/daux.c
* Make sure the NC_ATT_INFO_T.container field is set.
re:
The current netcdf-c release has some problems with the mingw platform
on windows. Mostly they are path issues.
Changes to support mingw+msys2:
-------------------------------
* Enable option of looking into the windows registry to find
the mingw root path. In aid of proper path handling.
* Add mingw+msys as a specific platform in configure.ac and move testing
of the platform to the front so it is available early.
* Handle mingw X libncpoco (dynamic loader) properly even though
mingw does not yet support it.
* Handle mingw X plugins properly even though mingw does not yet support it.
* Alias pwd='pwd -W' to better handle paths in shell scripts.
* Plus a number of other minor compile irritations.
* Disallow the use of multiple nc_open's on the same file for windows
(and mingw) because windows does not seem to handle these properly.
Not sure why we did not catch this earlier.
* Add mountpoint info to dpathmgr.c to help support mingw.
* Cleanup dpathmgr conversions.
Known problems:
---------------
* I have not been able to get shared libraries to work, so
plugins/filters must be disabled.
* There is some kind of problem with libcurl that I have not solved,
so all uses of libcurl (currently DAP+Byterange) must be disabled.
Misc. other fixes:
------------------
* Cleanup the relationship between ENABLE_PLUGINS and various other flags
in CMakeLists.txt and configure.ac.
* Re-arrange the TESTDIRS order in Makefile.am.
* Add pseudo-breakpoint to nclog.[ch] for debugging.
* Improve the documentation of the path manager code in ncpathmgr.h
* Add better support for relative paths in dpathmgr.c
* Default the mode args to NCfopen to include "b" (binary) for windows.
* Add optional debugging output in various places.
* Make sure that everything builds with plugins disabled.
* Fix numerous (s)printf inconsistencies betweenb the format spec
and the arguments.
re: https://github.com/Unidata/netcdf-c/issues/2117
re: https://github.com/Unidata/netcdf-c/issues/2119
* Modify libsrc to allow byte-range reading of netcdf-3 files in private S3 buckets; this required using the aws sdk. Also add a test case.
* The aws sdk can sometimes cause problems if the Awd::ShutdownAPI function is not called. So at optional atexit() support to ensure it is called. This is disabled for Windows.
* Add documentation to nczarr.md on how to build and use the aws sdk under windows. Currently it builds, but testing fails.
* Switch testing from stratus to the Unidata bucket on S3.
* Improve support for the s3: url protocol.
* Add a s3 specific utility code file: ds3util.c
* Modify NC_infermodel to attempt to read the magic number of byte-ranged files in S3.
## Misc.
* Move and rename the core S3 SDK wrapper code (libnczarr/zs3sdk.cpp) to libdispatch since it now used in libsrc as well as libnczarr.
* Add calls to nc_finalize in the utilities in case atexit is disabled.
* Add header only json parser to the distribution rather than as a built source.
## S3 Related Fixes
* Add comprehensive support for specifying AWS profiles to provide access credentials.
* Parse the files "~/.aws/config" and "~/.aws/credentials to provide credentials for the HDF5 ROS3 driver and to locate default region.
* Add a function to obtain the currently active S3 credentials. The search rules are defined in docs/nczarr.md.
* Provide documentation for the new features.
* Modify the struct NCauth (in include/ncauth.h) to replace specific S3 credentials with a profile name.
* Add a unit test to test the operation of profile and credentials management.
* Add support for URLS of the form "s3://<bucket>/<key>"; this requires obtaining a default region.
* Allows the specification of profile and/or region in a URL of the form "#mode=nczarr,...&aws.region=...&aws.profile=..."
## Misc. Fixes
* Move the ezxml code to libdispatch so that it can be used both by DAP4 and nczarr.
* Modify nclist to provide a deep clone operation.
* Modify ncuri to provide a deep clone operation.
* Modify the .rc file format to allow the specification of a path to be tested when looking for an entry in the .rc file.
* Ensure that the NC_rcload function is called.
* Modify nchttp to support setting request headers.
Filter support has three goals:
1. Use the existing HDF5 filter implementations,
2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr,
3. Allow filters to be used even when HDF5 is disabled
Detailed usage directions are define in docs/filters.md.
For now, the existing filter API is left in place. So filters
are defined using ''nc_def_var_filter'' using the HDF5 style
where the id and parameters are unsigned integers.
This is a big change since filters affect many parts of the code.
In the following, the terms "compressor" and "filter" and "codec" are generally
used synonomously.
### Filter-Related Changes:
* In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms.
* Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h.
* Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out.
* Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h.
* Add a number of new test to test the new nczarr filters.
* Let ncgen parse _Codecs attribute, although it is ignored.
### Plugin directory changes:
* Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file
* Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip
* Add a Codec defaulter (see docs/filters.md) for the big four filters.
* Make plugins work with windows by properly adding __declspec declaration.
### Misc. Non-Filter Changes
* Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5.
* Improve support for caching
* More fixes for path conversion code
* Fix misc. memory leaks
* Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath.
* Add a number of new test to test the non-filter fixes.
* Update the parsers
* Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32'
re: https://github.com/zarr-developers/zarr-specs/issues/41
After discussions with the Zarr community, it was decided to
convert to a new representation of the NCZarr meta-data extensions: version 2.
These extensions store information necessary to mapping the Zarr data model
to the netcdf-4 data model.
The basic change is to remove the NCZarr specific objects: .nczarr, .nczgroup, .nczarray, and .nczattr.
The contents of these objects is moved into the corresponding existing Zarr objects as special keys. The mapping is as follows:
* ''.nczarr'' => ''/.zgroup/_NCZARR_SUPERBLOCK_''
* ''.nczgroup => ''.zgroup/_NCZARR_GROUP_''
* ''.nczarray => ''.zarray/_NCZARR_ARRAY_''
* ''.nczattr => ''.zattr/_NCZARR_ATTR_''
Backward compatibility is maintained by looking for the object ''/.nczarr''
and if found, then assuming that the dataset is in the older version 1 format.
This compatibility only supports reading of such version 1 datasets.
Documentation and test cases are also added.
Misc. Other Changes:
1. The json parsing code was added to the general library instead of nczarr only (ncjson.c, ncjson.h).
2. Improved support for different platform paths by allowing conversion
to a single common path representation.
3. Add some new error codes.
4. Modify nccopy usage to mention the new chunking specification.
re: https://github.com/Unidata/netcdf-c/issues/2008
The fill_value key in a .zarray should have a single value,
but it currently has a value that is a 1 element array.
Fix is to pull out the single element.
This occurred because the fill_value is taken from the _FillValue attribute,
and all netcdf attributes are stored as arrays, of length 1 in this case.
In a related change, any attribute with length 1 is now stored in .zattrs
as a singleton rather than an array of length 1. This make the generated
Zarr more consistent with other Zarr implementations.
Misc. other changes:
1. Fix bug in testpathcvt caused by the way various shells handle backslash escapes.
2. Fix bug in testauth where test for MSVC is wrong.
re: Issue https://github.com/Unidata/netcdf-c/issues/1999
NCclosedir code is incorrect. Fix.
Note that this issue crops up when using a non-VisualStudio windows build
such as Mingw because Mingq defines dirent.h, but Visual Studio does not.
Addendum:
Fix some mingw bugs:
1. Modify XGetopt.h to be conditional on _WIN32 instead of _MSC_VER.
2. Make sure sys/stat.h is included in ncpathmgr.h
re: https://github.com/Unidata/netcdf-c/issues/1996
Improve the error message and location that is reported when reading a filter with a variable that uses a filter that is not available on the reading platform.
This requires checking the availability of the filter, recording it, and failing when any attempt is made to read or write that variable. A test case was added for this in tst_filter.sh. Also, LOG level 0 message is generated giving the variable and the filter id.
Note that by design if there is no attempt to read or write the variable, then no error is reported; this means that, for example, ncdump -h will list the filter even though it is not actually available. This is important for allowing a user to see the filter details.
re: github issue https://github.com/Unidata/netcdf-c/issues/1982
The problem was that the libnczarr/zsjon.c handling of strings with
embedded double quotes was wrong; a one line fix.
Also added a test case.
Misc. other changes:
1. I Discovered, en passant, that the handling of 64 bit constants
had an error that was fixed.
2. cleanup of the constant conversion code to recurse on arrays of values.
Re: https://github.com/zarr-developers/zarr-python/pull/716
The Zarr version 2 spec has been extended to include the ability
to choose the dimension separator in chunk name keys. The legal
separators has been extended from {'.'} to {'.' '/'}. So now it
is possible to use a key like "0/1/2/0" for chunk names.
This PR implements this for NCZarr. The V2 spec now says that
this separator can be set on a per-variable basis. For now, I
have chosen to allow this be set only globally by adding a key
named "ZARR.DIMENSION_SEPARATOR=<char>" in the
.daprc/.dodsrc/ncrc file. Currently, the only legal separator
characters are '.' (the default) and '/'. On writing, this key
will only be written if its value is different than the default.
This change caused problems because supporting a separator of '/'
is difficult to parse when keys/paths use '/' as the path separator.
A test case was added for this.
Additionally, make nczarr be enabled default by default. This required
some additional changes so that if zip and/or AWS S3 sdk are unavailable,
then they are disabled for NCZarr.
In addition the following unrelated changes were made.
1. Tested that pure-zarr mode could read an nczarr formatted store.
1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added.
1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl
is not found then the other options that depend upon it properly
are disabled.
1. I decided that xarray support should be enabled by default for pure
zarr. In order to allow disabling, I added a new mode flag "noxarray".
1. Certain test in nczarr_test depend on use of .dodsrc. In order for these
to work when testing in parallel, some inter-test dependencies needed to
be added.
1. Improved authorization testing to use changes in thredds.ucar.edu
interoperability fixed. We were given a Zarr format dataset
stored as a directory+file tree. This dataset uses the XArray
conventions and was generated by some non-Unidata Zarr implementation.
In attempting to process it with NCZarr, several interoperability
problems were discovered and fixed. This gives us more confidence
that NCZarr -- using pure zarr -- can interoperate with other
Zarr implementations.
Specific changes:
* Add test nczarr_test/run_interop.sh
* Support attributes with single value not enclosed in JSON array tags.
* Add mode inferencing and use it in nczarr_test/run_purezarr.sh
* Reduce size of tst_err_enddef.nc because it is more than 3 GB.
Even though the `fflush()` is on the same line as the `fprintf(stderr, ...` statement, it is not part of the `if` and is therefore, executed even if the `wdebug` is not active. This results in `fflush()` being called more than it should.
Added parenthesis to property protect the fflush call.
The netcdf-c code has to deal with a variety of platforms:
Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ
significantly in the kind of file paths that they accept. So in
order to handle this, I have created a set of replacements for
the most common file system operations such as _open_ or _fopen_
or _access_ to manage the file path differences correctly.
A more limited version of this idea was already implemented via
the ncwinpath.h and dwinpath.c code. So this can be viewed as a
replacement for that code. And in path in many cases, the only
change that was required was to replace '#include <ncwinpath.h>'
with '#include <ncpathmgt.h>' and then replace file operation
calls with the NCxxx equivalent from ncpathmgr.h Note that
recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull
request should not require dealing with winpath.
The heart of the change is include/ncpathmgmt.h, which provides
alternate operations such as NCfopen or NCaccess and which properly
parse and rebuild path arguments to work for the platform on which
the code is executing. This mostly matters for Windows because of the
way that it uses backslash and drive letters, as compared to *nix*.
One important feature is that the user can do string manipulations
on a file path without having to worry too much about the platform
because the path management code will properly handle most mixed cases.
So one can for example concatenate a path suffix that uses forward
slashes to a Windows path and have it work correctly.
The conversion code is in libdispatch/dpathmgr.c, and the
important function there is NCpathcvt which does the proper
conversions to the local path format.
As a rule, most code should just replace their file operations with
the corresponding NCxxx ones defined in include/ncpathmgmt.h. These
NCxxx functions all call NCpathcvt on their path arguments before
executing the actual file operation.
In some rare cases, the client may need to directly use NCpathcvt,
but this should be avoided as much as possible. If there is a need
for supporting a new file operation not already in ncpathmgmt.h, then
use the code in dpathmgr.c as a template. Also please notify Unidata
so we can include it as a formal part or our supported operations.
Also, if you see an operation in the library that is not using the
NCxxx form, then please submit an issue so we can fix it.
Misc. Changes:
* Clean up the utf8 testing code; it is impossible to get some
tests to work under windows using shell scripts; the args do
not pass as utf8 but as some other encoding.
* Added an extra utf8 test case: test_unicode_path.sh
* Add a true test for HDF5 1.10.6 or later because as noted in
PR https://github.com/Unidata/netcdf-c/pull/1794,
HDF5 changed its Windows file path handling.
The XArray implementation that uses Zarr for storage
provides a mechanism to simulate named dimensions.
It does this by adding a per-variable attribute called
_ARRAY_DIMENSIONS. This attribute contains a list of names
to be matched against the shape values of the variable.
In effect a named dimension is created with the name
_ARRAY_DIMENSIONS(i) and length shape(i) for all i
in range 0..rank(variable).
Both read and write support is provided.
This XArray support is only invoked if the mode value
of "xarray" is defined. So for example, as in this URL.
````
https://s3.us-west-1.amazonaws.com/bucket/dataset#mode=nczarr,xarray,s3
````
Note that the "xarray" mode flag also implies mode flag "zarr", so the above
is equivalent to this URL.
````
https://s3.us-west-1.amazonaws.com/bucket/dataset#mode=nczarr,zarr,xarray,s3
````
The primary change to implement this was to unify the handling
of dimension references in libnczarr/zsync.
A test for this and other pure-zarr features was added as
nczarr_test/run_purezarr.sh
Other changes:
* Make sure distcheck leaves no files around.
* Change the special attribute flag DIMSCALEFLAG to HIDDENATTRFLAG
to support the xarray attribute.
* Annotate the zmap implementations with feature flags such as
WRITEONCE (for zip files).
The primary change is to support the use of a zip file as a
storage format. Simultaneously the .nz4 support is made obsolete
Use of zip requires the libzip support library, so a number of
changes to the build files (Makefile.am, CMakeLists.txt) are
necessary to locate and incorporate libzip. The nczarr_tests
tests are also changed to add zip testing.
Other changes:
* Make sure distcheck leaves no files around.
* Add some functions to netcdf_aux to export some functions of libnetcdf.
* Add a new error NC_EFOUND as the complement of NC_EEMPTY.
* Add tracing support to nclog and use it in libnczarr.
* Modify the zmap interface to support the writeonce semantics of zip.
* Create a new s3util.c to support a variety of S3 auxilliary functions.
* EXTERNL'ize a number of functions so they can be used in s3util.
* Add support for the S3 ListObjects CommonPrefixes mechanism
to improve search.
* Add experimental support for running nczarr X s3 tests against
the actual Amazon S3 cloud.
* Replace wholevar with more useful wholechunk optimization
* Add optimization to read multiple values at one time
* Replace NCDEFAULT_get/put_vars with native nczarr versions.
* Clarify chunk projection computations
* zdebdispatch.h
* Add more chunking test cases and re-enable run_chunkcases
* If !szip, then suppress deflate interference test
* Make H5Znoop(1) filter produce more information
* cleanup bzlib.c API
Primary Fixes:
* Add a whole variable optimization -- used in the rare case that nc_get/put_vara covers the whole of a variable and the variable has a single chunk.
* Fix chunking error when stride causes whole chunks to be skipped.
* Fix some memory leaks
* Add test cases
* Add one performance test to nczarr_test/. This uses the timer utils from unit_test: timer_utils.[ch].
* Move ncdumpchunks utility from ncdump to nczarr_test
Misc. Other Changes:
* Make check for aws libraries conditional on --enable-nczarr-s3
* Remove all but one bm tests from nczarr_test until they are working.
* Remove another dependency on HDF5 from supposedly non-HDF5 specific code; specifically hdf5_log_hdf5.
* Make the BAIL2 macro be hdf5 specific and replace elsewhere with an HDF5 independent equivalent.
* Move hdf5cache.c to libsrc4/nc4cache.c because it is used by nczarr.
* Modify unit_tests so that some of them are run even if using Windows.
* Misc. small bug fixes and refactors and memory leaks.
* Rename some conflicting tests for cmake.
* Attempted to make nc_perf work with cmake and failed.
Re: GH Issue https://github.com/Unidata/netcdf-c/issues/1900
Apparently the clock_gettime() function is not always available.
It is used in unit_test/tst_exhash.c and unit_test/tst_xcache.c.
To solve this, a number of things were changed:
* Move the timing code to a new file unit_tests/timer_utils.[ch]
* Modify the timing code to choose one of several timing methods
depending on availability. The prioritized order is as follows:
1. If Windows, use the QueryPerformanceCounter mechanism else
2. Use clock_gettime if available else
3. Use gettimeofday if available else
4. Use getrusage if available
Note that the resolution of 3 and 4 is less than 1 or 2.
Misc. Other Changes:
* Move the test in CMakeLists.txt that disables unit tests for WIN32 to unit_test/CMakeLists.txt since some unit tests actually work under Visual Studio.
* Fix some of the unit tests to work under visual studio
* Fix problem with using remove() in zmap_nzf.c
* Remove some warning about use of EXTERNL
Primary changes:
* Add an improved cache system to speed up performance.
* Fix NCZarr to properly handle scalar variables.
Misc. Related Changes:
* Added unit tests for extendible hash and for the generic cache.
* Add config parameter to set size of the NCZarr cache.
* Add initial performance tests but leave them unused.
* Add CRC64 support.
* Move location of ncdumpchunks utility from /ncgen to /ncdump.
* Refactor auth support.
Misc. Unrelated Changes:
* More cleanup of the S3 support
* Add support for S3 authentication in .rc files: HTTP.S3.ACCESSID and HTTP.S3.SECRETKEY.
* Remove the hashkey from the struct OBJHDR since it is never used.
If NCPROPERTIES_EXTRA (see configure.ac) is defined
but is null or empty, then an extra comma is being generated
at the end of _NCProperties global attribute.
Soln: check for null/empty NCPROPERTIES_EXTRA value.
re: https://github.com/Unidata/netcdf-c/issues/1836
Revert the internal filter code to simplify it. From the user's
point of view, the only visible changes should be:
1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h
2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter.
Internally,the dispatch table has been modified to get rid of the filter_actions
entry and associated complex structures. It has been replaced with
inq_var_filter_ids and inq_var_filter_info entries and the dispatch table
version has been bumped to 3. Corresponding NOOP and NOTNC4 functions
were added to libdispatch/dnotnc4.c. Also, the filter_action entries
in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2,
etc). This should only impact UDF users.
In the process, it became clear that the form of the filters
field in NC_VAR_INFO_T was format dependent, so I converted it to
be of type void* and pushed its management into the various dispatch
code bases. Specifically libhdf5 and libnczarr now manage the filters
field in their own way.
The auxilliary functions for parsing textual filter specifications
were moved to netcdf_aux.h and were renamed to the following:
* ncaux_h5filterspec_parse
* ncaux_h5filterspec_parselist
* ncaux_h5filterspec_free
* ncaux_h5filter_fix8
Misc. Other Changes:
1. Document NUG/filters.md updated to reflect the changes above.
2. All the old data types (structs and enums)
used by filter_actions actions were deleted.
The exception is the NC_H5_Filterspec because it is needed
by ncaux_h5filterspec_parselist.
3. Clientside filters were removed -- another enhancement
for which no-one ever asked.
4. The ability to remove filters was itself removed.
5. Some functionality needed by nczarr was moved from libhdf5
to libsrc4 e.g. nc4_find_default_chunksizes
6. All the filterx code was removed
7. ncfilter.h and nc4filter.c no longer used
Misc. Unrelated Changes:
1. The nczarr_test makefile clean was leaving some directories; so
add clean-local to take care of them.
re: Github Issue https://github.com/Unidata/netcdf-c/issues/1826
It turns out that the common get code (NC4_get_vars) in libhdf5
(and libnczarr) has an optimization where it does not attempt to
read from the file if the file is all fill values. Rather it
just fills the output buffer with the fill value. The problem
is that -- in that case -- it forgets that conversion might still be
needed. So the conversion never occurs and the raw bits of
the fill data are stored directly into the memory space.
Solution: move some code around to properly do the
conversion no matter how the data was obtained.
Added a test cases nc_test4/test_fillonly.sh and
nczarr_test/test_fillonlyz.sh
As it was, nccopy -c dim/x was sometimes being ignored. So
modify nccopy to properly take into account. This also required
a change to the nczarr code because it was not applying default
chunking in the same way as libhdf5.
Modify ncdump/tst_nccopy4.sh to test this feature properly.
Also add a similar test to nczarr_test.
Additionally, fix some other things that were causing Visual
Studio builds with testing to not work.
* fix curl testing under CMake to properly handle case
where DAP is disabled, but byterange support is enabled.
* properly test and/or define uintptr_t
* Convert _O_XXX to O_XXX flags used by open();
