re: Issue https://github.com/Unidata/netcdf-c/issues/1999
NCclosedir code is incorrect. Fix.
Note that this issue crops up when using a non-VisualStudio windows build
such as Mingw because Mingq defines dirent.h, but Visual Studio does not.
Addendum:
Fix some mingw bugs:
1. Modify XGetopt.h to be conditional on _WIN32 instead of _MSC_VER.
2. Make sure sys/stat.h is included in ncpathmgr.h
re: https://github.com/Unidata/netcdf-c/issues/1988
There was an issue with certain shell programs (bash notably).
For certain platforms and when given a url that had an escaped
'#' character (e.g. \\#) bash would not remove the backslash. So I
had to add a hack for this. Unfortunately I overdid it and it
removed all '' characters. This is ok for non-windows platforms,
but obviously fails for windows.
The fix is this.
1. In a utility program (ncgen, ncdump, nccopy, etc) there is probably a call (or calls) to NC_backslashUnescape(xxx) where xxx is a path argument from the command line.
2. Replace each such call with NC_shellUnescape(xxx).
The NC_shellUnescape function was added and searched only for occurrences of "\#" and replaces them with "#".
The netcdf-c code has to deal with a variety of platforms:
Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ
significantly in the kind of file paths that they accept. So in
order to handle this, I have created a set of replacements for
the most common file system operations such as _open_ or _fopen_
or _access_ to manage the file path differences correctly.
A more limited version of this idea was already implemented via
the ncwinpath.h and dwinpath.c code. So this can be viewed as a
replacement for that code. And in path in many cases, the only
change that was required was to replace '#include <ncwinpath.h>'
with '#include <ncpathmgt.h>' and then replace file operation
calls with the NCxxx equivalent from ncpathmgr.h Note that
recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull
request should not require dealing with winpath.
The heart of the change is include/ncpathmgmt.h, which provides
alternate operations such as NCfopen or NCaccess and which properly
parse and rebuild path arguments to work for the platform on which
the code is executing. This mostly matters for Windows because of the
way that it uses backslash and drive letters, as compared to *nix*.
One important feature is that the user can do string manipulations
on a file path without having to worry too much about the platform
because the path management code will properly handle most mixed cases.
So one can for example concatenate a path suffix that uses forward
slashes to a Windows path and have it work correctly.
The conversion code is in libdispatch/dpathmgr.c, and the
important function there is NCpathcvt which does the proper
conversions to the local path format.
As a rule, most code should just replace their file operations with
the corresponding NCxxx ones defined in include/ncpathmgmt.h. These
NCxxx functions all call NCpathcvt on their path arguments before
executing the actual file operation.
In some rare cases, the client may need to directly use NCpathcvt,
but this should be avoided as much as possible. If there is a need
for supporting a new file operation not already in ncpathmgmt.h, then
use the code in dpathmgr.c as a template. Also please notify Unidata
so we can include it as a formal part or our supported operations.
Also, if you see an operation in the library that is not using the
NCxxx form, then please submit an issue so we can fix it.
Misc. Changes:
* Clean up the utf8 testing code; it is impossible to get some
tests to work under windows using shell scripts; the args do
not pass as utf8 but as some other encoding.
* Added an extra utf8 test case: test_unicode_path.sh
* Add a true test for HDF5 1.10.6 or later because as noted in
PR https://github.com/Unidata/netcdf-c/pull/1794,
HDF5 changed its Windows file path handling.
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
Fix Issue https://github.com/Unidata/netcdf-c/issues/1725.
Replace PR https://github.com/Unidata/netcdf-c/pull/1726
Also replace PR https://github.com/Unidata/netcdf-c/pull/1694
The general problem is that under Visual Studio, we are seeing
a number of undefined reference and other scoping errors.
The reason is that the code is not properly using Visual Studio
_declspec() declarations.
The basic solution is to ensure that when compiling the code itself
one needs to ensure that _declspec(dllexport) is used. There
are several sets of macros to handle this, but they all rely
on the flag DLL_EXPORT being define when the code is compiled,
but not being defined when the code is used via a .h file.
As a test, I modified XGetOpt.c to build properly. I also
fixed the oc2 library to properly _declspec things like ocdebug.
I also made some misc. changes to get all the tests to run
if cygwin is installed (to get bash, sed, etc).
Misc. Changes:
* Put XGetOpt.c into libsrc and copy at build time
to the other directories where it is needed.
Primary fixes to get -ansi to work.
1. Convert all '//' C++ style comments to /*...*/ or to use #if 0...#endif
2. It turns out that when -ansi is specified, then a number of
functions no longer are defined in the header -- but they are still
in the .so file.<br>
The big example is strdup(). So, added code to include/ncconfig.h to define
externs for those missing functions that occur in more than one place.
These are enabled if !_WIN32 && __STDC__ == 1 (__STDC__ is supposed to
be the equivalent compile time flag to -ansi). Note that this requires
config.h (which references ncconfig.h) to be included in files where it is
currently not included. Single uses will be only in the file that uses them.
3. Added mmap test for the MAP_ANONYMOUS flag to configure.ac. Apparently
this is not always defined with -ansi.
4. fix some large integer constants in nc_test4/tst_atts3.c and nc_test4/tst_filterparser.c
to avoid compiler complaints.
5. fix a double constant in nc_test4/tst_filterparser.c to avoid compiler complaints.
[Note I suspect #4 and #5 will be a problem on big-endian machines, but we have no way to test]
Misc. Changes:
1. convert more instances of _MSC_VER to _WIN32.
2. added some debugging code to include/nctestserver.h
3. added comment about libdispatch/drc.c always being compiled.
4. modify parser generation in ncgen to remove unneeded files.
This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173
Sorry that it is so big, but leak suppression can be complex.
This PR fixes all remaining memory leaks -- as determined by
-fsanitize=address, and with the exceptions noted below.
Unfortunately. there remains a significant leak that I cannot
solve. It involves vlens, and it is unclear if the leak is
occurring in the netcdf-c library or the HDF5 library.
I have added a check_PROGRAM to the ncdump directory to show the
problem. The program is called tst_vlen_demo.c To exercise it,
build the netcdf library with -fsanitize=address enabled. Then
go into ncdump and do a "make clean check". This should build
tst_vlen_demo without actually executing it. Then do the
command "./tst_vlen_demo" to see the output of the memory
checker. Note the the lost malloc is deep in the HDF5 library
(in H5Tvlen.c).
I am temporarily working around this error in the following way.
1. I modified several test scripts to not execute known vlen tests
that fail as described above.
2. Added an environment variable called NC_VLEN_NOTEST.
If set, then those specific tests are suppressed.
This should mean that the --disable-utilities option to
./configure should not need to be set to get a memory leak clean
build. This should allow for detection of any new leaks.
Note: I used an environment variable rather than a ./configure
option to control the vlen tests. This is because it is
temporary (I hope) and because it is a bit tricky for shell
scripts to access ./configure options.
Finally, as before, this only been tested with netcdf-4 and hdf5 support.
stored in the _NCProperties attribute to allow two things:
1. capture of additional library dependencies (over and above
hdf5)
2. Recognition of non-netcdf libraries that create netcdf-4 format
files.
To this end, the _NCProperties format has been extended to be
and arbitrary set of key=value pairs separated by commas.
This new format has version = 2, and uses commas as the pair separator.
Thus the general form is:
_NCProperties = "version=2,key1=value,key2=value2..." ;
This new version is accompanied by a new ./configure option of the form
--with-ncproperties="key1=value1,key2=value2..."
that specifies pairs to add to the _NCProperties attribute for all
files created with that netcdf library.
At this point, what is missing is some programmatic way to
specify either all the pairs or additional pairs
to the _NCProperties attribute. Not sure of the best way
to do this.
Builders using non-netcdf libraries can specify
whatever they want in the key value pairs (as long
as the version=2 is specified first).
By convention, the primary library is expected to be the
the first pair after the leading version=2 pair, but this
is convention only and is neither required nor enforced.
Related changes:
1. Fixed the tests that check _NCProperties to properly operate with version=2.
2. When reading a version 1 _NCProperties attribute, convert it to look
like a version 2 attribute.
2. Added some version 2 tests to ncdump/tst_fileinfo.c and
ncdump/tst_fileinfo.sh
Misc Changes:
1. Fix minor problem in ncdap_test/testurl.sh where a parameter to
buildurl needed to be quoted.
2. Minor fix to ncgen to swap switches -H and -h to be consistent
with other utilities.
3. Document the -M flag in nccopy usage() and the nccopy man page.
4. Modify a test case to use the nccopy -M flag.
re pull request https://github.com/Unidata/netcdf-c/pull/405
re pull request https://github.com/Unidata/netcdf-c/pull/446
Notes:
1. This branch is a cleanup of the magic.dmh branch.
2. magic.dmh was originally merged, but caused problems with parallel IO.
It was re-issued as pull request https://github.com/Unidata/netcdf-c/pull/446.
3. This branch + pull request replace any previous pull requests and magic.dmh branch.
Given an otherwise valid netCDF file that has a corrupted header,
the netcdf library currently crashes. Instead, it should return
NC_ENOTNC.
Additionally, the NC_check_file_type code does not do the
forward search required by hdf5 files. It currently only looks
at file position 0 instead of 512, 1024, 2048,... Also, it turns
out that the HDF4 magic number is assumed to always be at the
beginning of the file (unlike HDF5).
The change is localized to libdispatch/dfile.c See
https://support.hdfgroup.org/release4/doc/DSpec_html/DS.pdf
Also, it turns out that the code in NC_check_file_type is duplicated
(mostly) in the function libsrc4/nc4file.c#nc_check_for_hdf.
This branch does the following.
1. Make NC_check_file_type return NC_ENOTNC instead of crashing.
2. Remove nc_check_for_hdf and centralize all file format checking
NC_check_file_type.
3. Add proper forward search for HDF5 files (but not HDF4 files)
to look for the magic number at offsets of 0, 512, 1024...
4. Add test tst_hdf5_offset.sh. This tests that hdf5 files with
an offset are properly recognized. It does so by prefixing
a legal file with some number of zero bytes: 512, 1024, etc.
5. Off-topic: Added -N flag to ncdump to force a specific output dataset name.
2. Factored out the parameter string parsing for ncgen and nccopy
int libdispatch/dfilter.c + include/ncfilter.h
3. Allow a parameter string to use constant types other than
unsigned int. See docs/filters.md for details.
4. Moved the old content of include/netcdf_filter.h into include/netcdf.h
and removed include/netcdf_filter.h as no longer needed.
5. Force the test filter (bzip2) in nc_test4/filter_test to
be built using BUILT_SOURCES.
it tries to infer the file kind based on
the constructs and types used in the .cdl
file. Previously, it included cdf5 as an
inferrable kind, but this is almost never
what is wanted. So limit inferable kinds
to netcdf classic vs netcdf enhanced.
Also fix tst_inttags4.sh test.
This relies on the HDF5 capability to
dynamically load compression filters.
Note that a compression filter is just
a subcase of filters.
The primary user-visible changes are as follows:
1. Add a standard header "netcdf_filter.h" that defines
the necessary API extensions
2. Modify ncgen to support two new special attributes
"_Filter_ID" and "_Filter_Parameters" so that compression
can be turned on when creating a file using ncgen.
4. Add a detailed description of filtering support
to the user's guide; see the file filters.md
5. Add a test case directory for this: nc_test4/filter_test.
It is fragile and a ./configure flags (-enable-filter-test)
is defined (default disabled) to shut this off this test
to avoid spurious 'make check' failures.
Note that the HDF5 documentation is not up-to-date, so
much of what is encoded here comes from examining the
actual code in the file H5PL.c in the HDF5 source code.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
This consists of a persistent attribute named
_NCProperties plus two computed attributes
_IsNetcdf4 and _SuperblockVersion.
See the 'Provenance Attributes' section
of docs/attribute_conventions.md for details.
that were not taking the CDF-5 format into account.
2. Had to update ncgen.1 man page to define the new
k-flag rules to deal with cdf-5.
3. Had to fix some tests that use 'cmp' for comparison;
this really should be deprecated.
3. There was a bug in configure.ac with respect
to using the enable-netcdf-4 flag vs
using disable-netcdf-4.
The code for handling character constants
in datalists in ncgen has some problems.
1. It failed on large constants
2. It did not handle e.g. var = 'a', 'b', ...
in the same way that ncgen3 did.
3. The code for generate.c and genchar.c needed
some refactoring to make it a little simpler
(but not simple).
should be under ENABLE_DAP_REMOTE_TESTS.
Fixed to make sure that this is so.
Also attempted to fix ncdap_test/CMakeLists.txt,
but probably got it wrong.
HT to Nico Schlomer.
2. Attempted to reduce the number of conversion errors
when -Wconversion is set. Fixed oc2, but
rest of netcdf remains to be done.
HT to Nico Schlomer.
3. When doing #2, I discovered an error in ncgen.y
that has remained hidden. This required some other
test case fixes.
Ncgen is unable to resolve
ambiguous references to an enum
constant when two different enums
have same econstant name.
Solved by allowing more specific
forms for econstant references.
1. /.../enumname.enumconstname
2. enumname.enumconstname
3. enumconstname
Case 1 is resolved by using the econstant
in the specific enum definition. If none is
found, an error is reported.
Case 2 is resolved by
1. finding an enclosing group with an
enum definition with the specified name
and containing the specified econstant.
If there are more than one, then an error is reported
2. finding all enum definitions in the dataset that have
the specified enum name and contain the specified
econstant. If more than one is found, then an error is reported.
If the above two methods fail, then report an error.
Case 3 is similar to case 2, but all enums, irrespective
of name are used if they contains the specified enum constant.
The ref_tst_econst.cdl test in ncdump is causing ncdump
to fail. So there may be yet some problem.
