The use of the following version-specific curl flags
is not always properly wrapped or aliased using
config.h HAVE_CURL... ifdefs.
# CURLOPT_USERNAME is not defined until curl version 7.19.1
# CURLOPT_PASSWORD is not defined until curl version 7.19.1
# CURLOPT_KEYPASSWD is not defined until curl version 7.16.4
-- aliased as needed to CURLOPT_SSLKEYPASSWD
# CURLINFO_RESPONSE_CODE is not defined until curl version 7.10.7
-- aliased as needed to CURLINFO_HTTP_CODE
# CURLOPT_CHUNK_BGN_FUNCTION is not defined until curl version 7.21.0
-- not used in our code
generates garbage. This in turn interferes with using .netrc
because the garbage user+pwd can will override the
.netrc. Note that this may work ok sometimes
if the garbage happens to start with a nul character.
2. It turns out that the user:pwd combination needs to support
character escaping. One reason is the user may contain an '@' character.
The other is that modern password rules make it not unlikely that
the password will contain characters that interfere with url parsing.
So, the rule I have implemented is that all occurrences of the user:pwd
format must escape any dodgy characters. The escape format is URL escaping
of the form %XX. This applies both to user:pwd
embedded in a URL as well as the use of HTTP.CREDENTIALS.USERPASSWORD
in a .dodsrc/.daprc file. The user and password in .netrc must not
be escaped. This is now documented in docs/auth.md
The fix for #2 actually obviated #1. Now, internally, the user and pwd
are stored separately and not in the user:pwd format. They are combined
(and escaped) only when needed.
2. modified ncdap_tests to remove <cr>
from generated output before comparison
to expected. This is a hack because
my other attempts to force windows to use
binary mode have not worked.
from e-support OYW-455599.
Problem was that in nctime.c#CDMonthDay, it was setting up
the month -> #days table correctly, but it did not use it
because it forgot to check for Cd366, it only checked for Cd365.
were added to provide a path name converter from e.g. cygwin
paths to e.g. windows paths. This is necessary because
the shell scripts may produce cygwin paths, but the code
may have been compiled with Visual Studio. Similar issues
arise with Mingw.
At appropriate places, and if using Visual Studio or Mingw,
I added calls to the path conversion code.
Apparently I forgot to find all the places where this
conversion was needed. So this pr does the following:
1. Push the calls to the converter to the various libXXX
directories and out of libdispatch/dfile.c.
2. Add conversion calls to other parts of the code like oc2.
I also turns out that conversion code in dapcvt.c
had a bug when handling DAP Byte type under visual studio.
Notes:
1. there may still be places I missed that need to do path conversion.
2. need to make sure that calls to e.g. H5open also use converted path.
This is a follow-on in that the old utf8 code was still being
used in ncgen to convert utf8->utf16 when converting cdl to Java
(see genj.c).
The new code apparently has no utf16 support, but it does have
utf32 support. Converting utf32 -> utf16 can be approximated by
truncating the 32bits to 16 bits, unless the top 16 bits are
not zero. This latter condition is unlikely to be common because
it implies use of some rather obscure characters.
So solution is to convert to utf32 and truncate to 16 bits to
get utf16. An error is reported if the high-order truncated 16
bits are not zero. If we get complaints, then I will figure out
how to convert full utf32 to a utf16 pair.
Other changes:
1. removed the old code from ncgen.
2. changed UTF8PROC_DLLEXPORT (in utf8proc) to EXTERNL
and added appropriate includes. This should fix
issue https://github.com/Unidata/netcdf-c/issues/404,
but since we cannot duplicate the failure, I am not quite
sure.
This is a follow-on in that the old utf8 code was still being
used in ncgen to convert utf8->utf16 when converting cdl to Java
(see genj.c).
The new code apparently has no utf16 support, but it does have
utf32 support. Converting utf32 -> utf16 can be approximated by
truncating the 32bits to 16 bits, unless the top 16 bits are
not zero. This latter condition is unlikely to be common because
it implies use of some rather obscure characters.
So solution is to convert to utf32 and truncate to 16 bits to
get utf16. An error is reported if the high-order truncated 16
bits are not zero. If we get complaints, then I will figure out
how to convert full utf32 to a utf16 pair.
Also removed the old code from ncgen.
1. When running under windows (as opposed to cygwin)
we need to make sure to not user /cygdrive/ file paths.
This was ocurring in libdap4/d4read.c, but may occur
elsewhere.
2. Shell scripts in the git repo are not being checked-out
with the executable mode set. Had core.filemode set to false.
Was a major hassle to fix.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
The nvars, ndims, and natts fields on the NC_HDF5_FILE_INFO struct are
never set. The nvars field is read, but since it is never written,
the value is always zero.
Update utf8proc.[ch] to use the version now
maintained by the Julia Language project
(https://github.com/JuliaLang/utf8proc/blob/master/LICENSE.md).
The license for the previous version was
unacceptable for the Debian and Ubuntu release
systems. The new version both updates the code
and addresses the license issue.
It turns out that the utf8proc software we are using
was turned over to the Julia Language developers
and the license terms changed to allow modification.
(https://github.com/JuliaLang/utf8proc/blob/master/LICENSE.md).
So the fix here is as follows:
1. Wrap the library with a fixed interface: libdispatch/dutf8.c
and include/ncutf8.h.
2. Replace the existing utf8proc code with the new version
from https://github.com/JuliaLang/utf8proc.
3. Add a couple more test cases: nc_test/tst_utf8_validate.c
and nc_test_utf8_phrases.c. If/when I can find a usable
normalization test, I will incorporate that later.
Modified provenance code to allocate the minimal space
needed for _NCProperties attribute in file. Basically
required using malloc in the provenance code and in ncdump.
Otherwise should cause no externally visible effects.
Also removed the ENABLE_FILEINFO from configure.ac since
the provenance code is no longer optional.
As best I can tell, this should be ENABLE_PARALLEL4 instead of ENABLE_PARALLEL. ENABLE_PARALLEL is not used other than in a couple documentation files. But, ENABLE_PARALLEL4 is set in the top-level CMakeLists.txt file if a parallel hdf5 library is detected.
The single commented out line was the only use of a c-99 or c++ style comment in the entire file. Either remove line completely or change to c-89 style comment to permit use with projects that still require c89 compatible code.
This consists of a persistent attribute named
_NCProperties plus two computed attributes
_IsNetcdf4 and _SuperblockVersion.
See the 'Provenance Attributes' section
of docs/attribute_conventions.md for details.
