A fairly vanilla build of 1.12.1 into a non-default directory ends up
with `HDF5_C_LIBRARY` set to `hdf5` which ends up failing all of the
`try_compile` checks because `-lhdf5` cannot be found.
* Set `CMAKE_REQUIRED_INCLUDES` to include the path found for `curl.h`. The `CHECK_C_SOURCE_COMPILES` function uses this and not the `INCLUDE_DIRECTORIES`
* Make the test for version 7.66 or later match the same test in `configure.ac`
* If the version is 7.66 or later, then we can skip the tests for the curl symbols which were all added in versions prior to 7.66.
* If the version is earlier than 7.66, then continue to perform the tests.
The thredds-test server now has some password protected datasets
that can be used to test DAP2 authorization support.
The general location is
````
https://thredds.ucar.edu/thredds/tdscapabilities/authTest.html
````
and specifically:
````
https://thredds.ucar.edu/thredds/dodsC/test3/testData.nc.html
````
This PR replaces old testcases with ncdap_test/testauth.sh.
This testcase allows us to test use of the .dodsrc file and .netrc file
and embedded user+pwd.
As part of this, I had to create a program (ncdap_test/pathcvt.c)
that is essentially the equivalent to cygpath. Given a path in
windows, unix, msys or cygwin format, it converts it to the
equivalent format in one of those four cases. So it can be used
to convert a cygwin path to a windows path, for example. This is
needed in testpathcvt and testauth to make sure that the paths
in .daprc (e.g. the reference to .netrc) are of the proper
format.
Misc. Other Changes:
1. Fix some memory leaks in libdap2
2. Setting the env variable CURLOPT_VERBOSE allows tracking of curl
operations.
3. Make tst_charvlenbug be conditional on NC_VLEN_NOTEST.
Re: https://github.com/zarr-developers/zarr-python/pull/716
The Zarr version 2 spec has been extended to include the ability
to choose the dimension separator in chunk name keys. The legal
separators has been extended from {'.'} to {'.' '/'}. So now it
is possible to use a key like "0/1/2/0" for chunk names.
This PR implements this for NCZarr. The V2 spec now says that
this separator can be set on a per-variable basis. For now, I
have chosen to allow this be set only globally by adding a key
named "ZARR.DIMENSION_SEPARATOR=<char>" in the
.daprc/.dodsrc/ncrc file. Currently, the only legal separator
characters are '.' (the default) and '/'. On writing, this key
will only be written if its value is different than the default.
This change caused problems because supporting a separator of '/'
is difficult to parse when keys/paths use '/' as the path separator.
A test case was added for this.
Additionally, make nczarr be enabled default by default. This required
some additional changes so that if zip and/or AWS S3 sdk are unavailable,
then they are disabled for NCZarr.
In addition the following unrelated changes were made.
1. Tested that pure-zarr mode could read an nczarr formatted store.
1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added.
1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl
is not found then the other options that depend upon it properly
are disabled.
1. I decided that xarray support should be enabled by default for pure
zarr. In order to allow disabling, I added a new mode flag "noxarray".
1. Certain test in nczarr_test depend on use of .dodsrc. In order for these
to work when testing in parallel, some inter-test dependencies needed to
be added.
1. Improved authorization testing to use changes in thredds.ucar.edu
Some of the tests for HDF5 symbols are failing due to not finding the include file which skews the test results. Added the `CMAKE_REQUIRED_INCLUDES` command to set the path. In one place this was already set, but used `HAVE_HDF5_H` which is not an include path and isn't even set at the location where it was used. We may not need these set more than once, but I added them before each `CHECK_C_SOURCE_COMPILES` in case those blocks get moved around and the value gets unset when it should be set.
Also changed the `H5Literate_vers` check to check that it is defined instead of checking the value. As best I can see, as long as it is defined, then the `H5Literate` symbol will be defined which is what is needed. Checked with 1.10.7 and 1.12.0
The netcdf-c code has to deal with a variety of platforms:
Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ
significantly in the kind of file paths that they accept. So in
order to handle this, I have created a set of replacements for
the most common file system operations such as _open_ or _fopen_
or _access_ to manage the file path differences correctly.
A more limited version of this idea was already implemented via
the ncwinpath.h and dwinpath.c code. So this can be viewed as a
replacement for that code. And in path in many cases, the only
change that was required was to replace '#include <ncwinpath.h>'
with '#include <ncpathmgt.h>' and then replace file operation
calls with the NCxxx equivalent from ncpathmgr.h Note that
recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull
request should not require dealing with winpath.
The heart of the change is include/ncpathmgmt.h, which provides
alternate operations such as NCfopen or NCaccess and which properly
parse and rebuild path arguments to work for the platform on which
the code is executing. This mostly matters for Windows because of the
way that it uses backslash and drive letters, as compared to *nix*.
One important feature is that the user can do string manipulations
on a file path without having to worry too much about the platform
because the path management code will properly handle most mixed cases.
So one can for example concatenate a path suffix that uses forward
slashes to a Windows path and have it work correctly.
The conversion code is in libdispatch/dpathmgr.c, and the
important function there is NCpathcvt which does the proper
conversions to the local path format.
As a rule, most code should just replace their file operations with
the corresponding NCxxx ones defined in include/ncpathmgmt.h. These
NCxxx functions all call NCpathcvt on their path arguments before
executing the actual file operation.
In some rare cases, the client may need to directly use NCpathcvt,
but this should be avoided as much as possible. If there is a need
for supporting a new file operation not already in ncpathmgmt.h, then
use the code in dpathmgr.c as a template. Also please notify Unidata
so we can include it as a formal part or our supported operations.
Also, if you see an operation in the library that is not using the
NCxxx form, then please submit an issue so we can fix it.
Misc. Changes:
* Clean up the utf8 testing code; it is impossible to get some
tests to work under windows using shell scripts; the args do
not pass as utf8 but as some other encoding.
* Added an extra utf8 test case: test_unicode_path.sh
* Add a true test for HDF5 1.10.6 or later because as noted in
PR https://github.com/Unidata/netcdf-c/pull/1794,
HDF5 changed its Windows file path handling.
re: Issue
The netcdf dispatch table version was defined in several places.
Modify to only require defining it in CMakeLists.txt and configure.ac.
Fix entailed the following changes:
* Up the NC_DISPATCH_VERSION from 2 to 3 in configure.ac and CMakeLists.txt
* Create include/netcdf_dispatch.h.in and use it to configure include/netcdf_dispatch.h
* For CMAKE, make it search CMAKE_CURRENT_BINARY_DIR so code can locate the configured netcdf_dispatch.h
* Add entry to config.h.cmake.in for NC_DISPATCH_VERSION
* Move NCerror from include/ncdispatch.h to libdap2/nccomon.h
* Fix an API problem re nchttp.h
* Fix a conversion warning in libdispatch/dinfermodel.c
The primary change is to support the use of a zip file as a
storage format. Simultaneously the .nz4 support is made obsolete
Use of zip requires the libzip support library, so a number of
changes to the build files (Makefile.am, CMakeLists.txt) are
necessary to locate and incorporate libzip. The nczarr_tests
tests are also changed to add zip testing.
Other changes:
* Make sure distcheck leaves no files around.
* Add some functions to netcdf_aux to export some functions of libnetcdf.
* Add a new error NC_EFOUND as the complement of NC_EEMPTY.
* Add tracing support to nclog and use it in libnczarr.
* Modify the zmap interface to support the writeonce semantics of zip.
* Create a new s3util.c to support a variety of S3 auxilliary functions.
* EXTERNL'ize a number of functions so they can be used in s3util.
* Add support for the S3 ListObjects CommonPrefixes mechanism
to improve search.
* Add experimental support for running nczarr X s3 tests against
the actual Amazon S3 cloud.
The `NC_HAS_MULTIFILTERS` line in `netcdf_meta.h` was not of the correct form -- showed as
```
#define NC_HAS_MULTIFILTERS
```
Instead of the better form:
```
#define NC_HAS_MULTIFILTERS 0 (or 1 if enabled)
```
Primary Fixes:
* Add a whole variable optimization -- used in the rare case that nc_get/put_vara covers the whole of a variable and the variable has a single chunk.
* Fix chunking error when stride causes whole chunks to be skipped.
* Fix some memory leaks
* Add test cases
* Add one performance test to nczarr_test/. This uses the timer utils from unit_test: timer_utils.[ch].
* Move ncdumpchunks utility from ncdump to nczarr_test
Misc. Other Changes:
* Make check for aws libraries conditional on --enable-nczarr-s3
* Remove all but one bm tests from nczarr_test until they are working.
* Remove another dependency on HDF5 from supposedly non-HDF5 specific code; specifically hdf5_log_hdf5.
* Make the BAIL2 macro be hdf5 specific and replace elsewhere with an HDF5 independent equivalent.
* Move hdf5cache.c to libsrc4/nc4cache.c because it is used by nczarr.
* Modify unit_tests so that some of them are run even if using Windows.
* Misc. small bug fixes and refactors and memory leaks.
* Rename some conflicting tests for cmake.
* Attempted to make nc_perf work with cmake and failed.
Re: GH Issue https://github.com/Unidata/netcdf-c/issues/1900
Apparently the clock_gettime() function is not always available.
It is used in unit_test/tst_exhash.c and unit_test/tst_xcache.c.
To solve this, a number of things were changed:
* Move the timing code to a new file unit_tests/timer_utils.[ch]
* Modify the timing code to choose one of several timing methods
depending on availability. The prioritized order is as follows:
1. If Windows, use the QueryPerformanceCounter mechanism else
2. Use clock_gettime if available else
3. Use gettimeofday if available else
4. Use getrusage if available
Note that the resolution of 3 and 4 is less than 1 or 2.
Misc. Other Changes:
* Move the test in CMakeLists.txt that disables unit tests for WIN32 to unit_test/CMakeLists.txt since some unit tests actually work under Visual Studio.
* Fix some of the unit tests to work under visual studio
* Fix problem with using remove() in zmap_nzf.c
* Remove some warning about use of EXTERNL
