re: https://github.com/Unidata/netcdf-c/issues/1977
PR https://github.com/Unidata/netcdf-c/pull/1753, changed ncgen
to allows certain type names to be used as identifiers in
selected situations.
An unwanted side effect was that existing type aliases no longer
were accepted by ncgen. Specifically, using the "long" type
caused an error.
I was able to figure out a better solution to the original
problem (https://github.com/Unidata/netcdf-c/issues/1750)
that also fixes this problem as well.
This PR fixes that problem in ncgen/ncgen.l,
and adds tests to ncdump/test_keywords.sh
cloud using a variant of the Zarr protocol and storage
format. This enhancement is generically referred to as "NCZarr".
The data model supported by NCZarr is netcdf-4 minus the user-defined
types and the String type. In this sense it is similar to the CDF-5
data model.
More detailed information about enabling and using NCZarr is
described in the document NUG/nczarr.md and in a
[Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in).
WARNING: this code has had limited testing, so do use this version
for production work. Also, performance improvements are ongoing.
Note especially the following platform matrix of successful tests:
Platform | Build System | S3 support
------------------------------------
Linux+gcc | Automake | yes
Linux+gcc | CMake | yes
Visual Studio | CMake | no
Additionally, and as a consequence of the addition of NCZarr,
major changes have been made to the Filter API. NOTE: NCZarr
does not yet support filters, but these changes are enablers for
that support in the future. Note that it is possible
(probable?) that there will be some accidental reversions if the
changes here did not correctly mimic the existing filter testing.
In any case, previously filter ids and parameters were of type
unsigned int. In order to support the more general zarr filter
model, this was all converted to char*. The old HDF5-specific,
unsigned int operations are still supported but they are
wrappers around the new, char* based nc_filterx_XXX functions.
This entailed at least the following changes:
1. Added the files libdispatch/dfilterx.c and include/ncfilter.h
2. Some filterx utilities have been moved to libdispatch/daux.c
3. A new entry, "filter_actions" was added to the NCDispatch table
and the version bumped.
4. An overly complex set of structs was created to support funnelling
all of the filterx operations thru a single dispatch
"filter_actions" entry.
5. Move common code to from libhdf5 to libsrc4 so that it is accessible
to nczarr.
Changes directly related to Zarr:
1. Modified CMakeList.txt and configure.ac to support both C and C++
-- this is in support of S3 support via the awd-sdk libraries.
2. Define a size64_t type to support nczarr.
3. More reworking of libdispatch/dinfermodel.c to
support zarr and to regularize the structure of the fragments
section of a URL.
Changes not directly related to Zarr:
1. Make client-side filter registration be conditional, with default off.
2. Hack include/nc4internal.h to make some flags added by Ed be unique:
e.g. NC_CREAT, NC_INDEF, etc.
3. cleanup include/nchttp.h and libdispatch/dhttp.c.
4. Misc. changes to support compiling under Visual Studio including:
* Better testing under windows for dirent.h and opendir and closedir.
5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags
and to centralize error reporting.
6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them.
7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible.
Changes Left TO-DO:
1. fix provenance code, it is too HDF5 specific.
The current ncgen does not properly handle very large
data sections. Apparently this is very uncommon because
it was only discovered in testing the new zarr code.
The fix required a new approach to processing data sections.
Unfortunately, the resulting ncgen is slower than before
but at least it is, I think, now correct.
The added test cases are in libnczarr, and so will
not show up until that is incorporated into master.
Note also that fortran code generation changed, but
has not been tested here.
Misc. Changes
1. Cleanup error handling in ncgen -lc and -lb output
2. Cleanup Makefiles for ncgen to remove unused code
3. Added a program, ncgen/ncdumpchunks, to print
the data for a .nc file on a per-chunk format.
4. Made the XGetOpt change in PR https://github.com/Unidata/netcdf-c/pull/1694
for ncdump/ncvalidator
This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173
Sorry that it is so big, but leak suppression can be complex.
This PR fixes all remaining memory leaks -- as determined by
-fsanitize=address, and with the exceptions noted below.
Unfortunately. there remains a significant leak that I cannot
solve. It involves vlens, and it is unclear if the leak is
occurring in the netcdf-c library or the HDF5 library.
I have added a check_PROGRAM to the ncdump directory to show the
problem. The program is called tst_vlen_demo.c To exercise it,
build the netcdf library with -fsanitize=address enabled. Then
go into ncdump and do a "make clean check". This should build
tst_vlen_demo without actually executing it. Then do the
command "./tst_vlen_demo" to see the output of the memory
checker. Note the the lost malloc is deep in the HDF5 library
(in H5Tvlen.c).
I am temporarily working around this error in the following way.
1. I modified several test scripts to not execute known vlen tests
that fail as described above.
2. Added an environment variable called NC_VLEN_NOTEST.
If set, then those specific tests are suppressed.
This should mean that the --disable-utilities option to
./configure should not need to be set to get a memory leak clean
build. This should allow for detection of any new leaks.
Note: I used an environment variable rather than a ./configure
option to control the vlen tests. This is because it is
temporary (I hope) and because it is a bit tricky for shell
scripts to access ./configure options.
Finally, as before, this only been tested with netcdf-4 and hdf5 support.
Specific changes:
1. Add dap4 code: libdap4 and dap4_test.
Note that until the d4ts server problem is solved, dap4 is turned off.
2. Modify various files to support dap4 flags:
configure.ac, Makefile.am, CMakeLists.txt, etc.
3. Add nc_test/test_common.sh. This centralizes
the handling of the locations of various
things in the build tree: e.g. where is
ncgen.exe located. See nc_test/test_common.sh
for details.
4. Modify .sh files to use test_common.sh
5. Obsolete separate oc2 by moving it to be part of
netcdf-c. This means replacing code with netcdf-c
equivalents.
5. Add --with-testserver to configure.ac to allow
override of the servers to be used for --enable-dap-remote-tests.
6. There were multiple versions of nctypealignment code. Try to
centralize in libdispatch/doffset.c and include/ncoffsets.h
7. Add a unit test for the ncuri code because of its complexity.
8. Move the findserver code out of libdispatch and into
a separate, self contained program in ncdap_test and dap4_test.
9. Move the dispatch header files (nc{3,4}dispatch.h) to
.../include because they are now shared by modules.
10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts.
11. Make use of MREMAP if available
12. Misc. minor changes e.g.
- #include <config.h> -> #include "config.h"
- Add some no-install headers to /include
- extern -> EXTERNL and vice versa as needed
- misc header cleanup
- clean up checking for misc. unix vs microsoft functions
13. Change copyright decls in some files to point to LICENSE file.
14. Add notes to RELEASENOTES.md
The code for handling character constants
in datalists in ncgen has some problems.
1. It failed on large constants
2. It did not handle e.g. var = 'a', 'b', ...
in the same way that ncgen3 did.
3. The code for generate.c and genchar.c needed
some refactoring to make it a little simpler
(but not simple).
to clean up resources properly on failure.
Refactored doubly-linked list code for objects in the libsrc4 directory,
cleaning up the add/del routines, breaking out the common next/prev
pointers into a struct and extracting the add/del operations on them,
changed the list of dims to add new dims in the same order as the other
types, made all add routines able to optionally return a pointer to the
newly created object.
Removed some dead code (pg_var(), nc4_pg_var1(), nc4_pg_varm(), misc. small
routines, etc)
Fixed fill value handling for string types in nc4_get_vara().
Changed many malloc()+strcpy() pairs into calls to strdup().
Cleaned up misc. other minor Coverity issues.
Fix bug where leading backslash digit
in name was not being properly handled.
The reason was that I accidentally attemped to allow \x... and \0...
escapes in identifiers. This make identifiers
with leading escaped digits not work any more.
Also added test case.
Columbia server does not serve up proper
opendap DDS replies. The Dataset {...} name
changes depending on if the request has certain
kinds of constraints.
Code for a hack was not being used, so restore it.
The fix is to effectively ignore differences in
Dataset node names if the code is coming from
columbia.edu.
2. [NCF-278]
The ncgen code is improperly typing int64 integer constants
as uint64.
3. [NCF-279]
Empty string constants were not being properly
filled when their target array is length 1 or more.
Added code to verify that enum constants
(and other constants) are consistent
with the type of the variable or
attribute to which they are assigned.
This addresses the ncdump failure.
- Fix NCF-157 to modify DAP code to support
partial variable retrieval.
- Fix of NCF-154 to solve problem of ncgen
improperly processing data lists for variables
of size greater than 2**18 bytes.
- Fix ncgen processing of char variables that have
multiple unlimited dimensions.
- Partly fix Jira issue: NCF-145 (vlen issues).
- Benchmark program nc_test4/tst_ar4_*) requires arguments
and should only be invoked inside a shell
script; fixed so that they terminate cleanly
if invoked with no arguments.
- Fix the Doxygen processing so it will work
with make distcheck.
- Begin switchover to using an alternative to ncio.
- Begin support for in-memory (diskless) files.
