netcdf-c/include/ncrc.h

91 lines
3.0 KiB
C
Raw Normal View History

/*
Copyright (c) 1998-2018 University Corporation for Atmospheric Research/Unidata
See COPYRIGHT for license information.
*/
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
2017-09-01 04:19:56 +08:00
/*
Common functionality for reading
and accessing rc files (e.g. .daprc).
*/
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#ifndef NCRC_H
#define NCRC_H
2017-09-01 04:19:56 +08:00
/* Need these support includes */
#include "ncuri.h"
2017-09-01 04:19:56 +08:00
#include "nclist.h"
#include "ncbytes.h"
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* getenv() keys */
#define NCRCENVIGNORE "NCRCENV_IGNORE"
#define NCRCENVRC "NCRCENV_RC"
#define NCRCENVHOME "NCRCENV_HOME"
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* Known .aws profile keys */
#define AWS_ACCESS_KEY_ID "aws_access_key_id"
#define AWS_SECRET_ACCESS_KEY "aws_secret_access_key"
#define AWS_REGION "aws_region"
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
typedef struct NCRCentry {
char* host; /* combined host:port */
char* urlpath; /* prefix to match or NULL */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
char* key;
char* value;
} NCRCentry;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
/* collect all the relevant info around the rc file and AWS */
typedef struct NCRCinfo {
2017-09-01 04:19:56 +08:00
int ignore; /* if 1, then do not use any rc file */
int loaded; /* 1 => already loaded */
NClist* entries; /* the rc file entry store fields*/
2017-09-01 04:19:56 +08:00
char* rcfile; /* specified rcfile; overrides anything else */
char* rchome; /* Overrides $HOME when looking for .rc files */
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NClist* s3profiles; /* NClist<struct AWSprofile*> */
} NCRCinfo;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Opaque structures */
struct NCS3INFO;
#if defined(__cplusplus)
extern "C" {
#endif
/* From drc.c */
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
EXTERNL void ncrc_initialize(void);
EXTERNL int NC_rcfile_insert(const char* key, const char* hostport, const char* path, const char* value);
EXTERNL char* NC_rclookup(const char* key, const char* hostport, const char* path);
EXTERNL char* NC_rclookupx(NCURI* uri, const char* key);
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* Following are primarily for debugging */
/* Obtain the count of number of entries */
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
EXTERNL size_t NC_rcfile_length(NCRCinfo*);
/* Obtain the ith entry; return NULL if out of range */
EXTERNL NCRCentry* NC_rcfile_ith(NCRCinfo*,size_t);
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* For internal use */
EXTERNL void NC_rcclear(NCRCinfo* info);
EXTERNL void NC_rcclear(NCRCinfo* info);
2017-09-01 04:19:56 +08:00
/* From dutil.c (Might later move to e.g. nc.h */
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
EXTERNL int NC__testurl(const char* path, char** basenamep);
EXTERNL int NC_isLittleEndian(void);
EXTERNL char* NC_entityescape(const char* s);
EXTERNL int NC_readfile(const char* filename, NCbytes* content);
Improve UTF8 Support On Windows re: Issue https://github.com/Unidata/netcdf-c/issues/2190 The primary purpose of this PR is to improve the utf8 support for windows. This is persuant to a change in Windows that supports utf8 natively (almost). The almost means that it is still utf16 internally and the set of characters representable by utf8 is larger than those representable by utf16. This leaves open the question in the Issue about handling the Windows 1252 character set. This required the following changes: 1. Test the Windows build and major version in order to see if native utf8 is supported. 2. If native utf8 is supported, Modify dpathmgr.c to call the 8-bit version of the windows fopen() and open() functions. 3. In support of this, programs that use XGetOpt (Windows versions) need to get the command line as utf8 and then parse to arc+argv as utf8. This requires using a homegrown command line parser named XCommandLineToArgvA. 4. Add a utility program called "acpget" that prints out the current Windows code page and locale. Additionally, some technical debt was cleaned up as follows: 1. Unify all the places which attempt to read all or a part of a file into the dutil.c#NC_readfile code. 2. Similary unify all the code that creates temp files into dutil.c#NC_mktmp code. 3. Convert almost all remaining calls to fopen() and open() to NCfopen() and NCopen3(). This is to ensure that path management is used consistently. This touches a number of files. 4. extern->EXTERNL as needed to get it to work under Windows.
2022-02-09 11:53:30 +08:00
EXTERNL int NC_readfilen(const char* filename, NCbytes* content, long long len);
EXTERNL int NC_readfileF(FILE* fp, NCbytes* content, long long len);
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
EXTERNL int NC_writefile(const char* filename, size_t size, void* content);
EXTERNL char* NC_mktmp(const char* base);
EXTERNL int NC_getmodelist(const char* modestr, NClist** modelistp);
EXTERNL int NC_testmode(NCURI* uri, const char* tag);
EXTERNL int NC_testpathmode(const char* path, const char* tag);
EXTERNL int NC_addmodetag(NCURI* uri, const char* tag);
EXTERNL int NC_split_delim(const char* path, char delim, NClist* segments);
EXTERNL int NC_join(struct NClist* segments, char** pathp);
EXTERNL int NC_joinwith(NClist* segments, const char* sep, const char* prefix, const char* suffix, char** pathp);
#if defined(__cplusplus)
}
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#endif /*NCRC_H*/