netcdf-c/libdap4/d4parser.c

1567 lines
45 KiB
C
Raw Normal View History

Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/*********************************************************************
2018-12-07 05:24:28 +08:00
* Copyright 2018, UCAR/Unidata
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
* See netcdf/COPYRIGHT file for copying and redistribution conditions.
*********************************************************************/
#include "d4includes.h"
#include <stdarg.h>
#include <assert.h>
#include "ezxml.h"
/**
* Implement the Dap4 Parser Using a DOM Parser
*
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
* This code creates in internal representation of the netcdf-4 metadata
* to avoid having to make so many calls into the netcdf library.
*/
/***************************************************/
/*
Map an xml node name to an interpretation.
We use NCD4_NULL when we directly interpret
the tag and do not need to search for it.
E.g Dataset, Dim, econst, etc.
If the sort is NCD4_NULL, then that means it is
irrelevant because that keyword will never be
searched for in this table.
*/
static const struct KEYWORDINFO {
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
char* tag; /* The xml tag e.g. <tag...> */
NCD4sort sort; /* What kind of node are we building */
nc_type subsort; /* discriminator */
char* aliasfor; /* Some names are aliases for others */
} keywordmap[] = {
{"Attribute", NCD4_ATTR,NC_NAT,NULL},
{"Byte", NCD4_VAR,NC_BYTE,"Int8"},
{"Char", NCD4_VAR,NC_CHAR,NULL},
{"Dataset", NCD4_NULL,NC_NAT,NULL},
{"Dim", NCD4_NULL,NC_NAT,NULL},
{"Dimension", NCD4_DIM,NC_NAT,NULL},
{"Enum", NCD4_VAR,NC_ENUM,NULL},
{"Enumconst", NCD4_NULL,NC_NAT,NULL},
{"Enumeration", NCD4_TYPE,NC_ENUM,NULL},
{"Float32", NCD4_VAR,NC_FLOAT,NULL},
{"Float64", NCD4_VAR,NC_DOUBLE,NULL},
{"Group", NCD4_GROUP,NC_NAT,NULL},
{"Int16", NCD4_VAR,NC_SHORT,NULL},
{"Int32", NCD4_VAR,NC_INT,NULL},
{"Int64", NCD4_VAR,NC_INT64,NULL},
{"Int8", NCD4_VAR,NC_BYTE,NULL},
{"Map", NCD4_NULL,NC_NAT,NULL},
{"Opaque", NCD4_VAR,NC_OPAQUE,NULL},
{"OtherXML", NCD4_XML,NC_NAT,NULL},
{"Sequence", NCD4_VAR,NC_SEQ,NULL},
{"String", NCD4_VAR,NC_STRING,NULL},
{"Structure", NCD4_VAR,NC_STRUCT,NULL},
{"UByte", NCD4_VAR,NC_UBYTE,"UInt8"},
{"UInt16", NCD4_VAR,NC_USHORT,NULL},
{"UInt32", NCD4_VAR,NC_UINT,NULL},
{"UInt64", NCD4_VAR,NC_UINT64,NULL},
{"UInt8", NCD4_VAR,NC_UBYTE,NULL},
{"URL", NCD4_VAR,NC_STRING,"String"},
{"Url", NCD4_VAR,NC_STRING,"String"},
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
};
typedef struct KEYWORDINFO KEYWORDINFO;
static const struct ATOMICTYPEINFO {
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
char* name; nc_type type; size_t size;
} atomictypeinfo[] = {
/* Keep in sorted order for binary search */
/* Use lower case for canonical comparison, but keep proper name here */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{"Byte",NC_BYTE,sizeof(char)},
{"Char",NC_CHAR,sizeof(char)},
{"Float32",NC_FLOAT,sizeof(float)},
{"Float64",NC_DOUBLE,sizeof(double)},
{"Int16",NC_SHORT,sizeof(short)},
{"Int32",NC_INT,sizeof(int)},
{"Int64",NC_INT64,sizeof(long long)},
{"Int8",NC_BYTE,sizeof(char)},
{"String",NC_STRING,sizeof(char*)},
{"UByte",NC_UBYTE,sizeof(unsigned char)},
{"UInt16",NC_USHORT,sizeof(unsigned short)},
{"UInt32",NC_UINT,sizeof(unsigned int)},
{"UInt64",NC_UINT64,sizeof(unsigned long long)},
{"UInt8",NC_UBYTE,sizeof(unsigned char)},
{"Url",NC_STRING,sizeof(char*)},
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{NULL,NC_NAT,0}
};
/***************************************************/
#ifdef D4DEBUG
static void setname(NCD4node* node, const char* name)
{
nullfree(node->name);
(node)->name = strdup(name); \
fprintf(stderr,"setname: node=%lx name=%s\n",(unsigned long)(node),(node)->name); \
}
#define SETNAME(node,src) setname((node),src)
#else
#define SETNAME(node,src) do {nullfree((node)->name); (node)->name = strdup(src);} while(0);
#endif
/***************************************************/
extern const char** ezxml_all_attr(ezxml_t xml, int* countp);
/* Forwards */
static int addOrigType(NCD4parser*, NCD4node* src, NCD4node* dst, const char* tag);
static int defineAtomicTypes(NCD4meta*,NClist*);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static void classify(NCD4node* container, NCD4node* node);
static int convertString(union ATOMICS*, NCD4node* type, const char* s);
static int downConvert(union ATOMICS*, NCD4node* type);
static int fillgroup(NCD4parser*, NCD4node* group, ezxml_t xml);
static NCD4node* getOpaque(NCD4parser*, ezxml_t varxml, NCD4node* group);
static int getValueStrings(NCD4parser*, NCD4node*, ezxml_t xattr, NClist*);
static int isReserved(const char* name);
static const KEYWORDINFO* keyword(const char* name);
static NCD4node* lookupAtomicType(NClist*, const char* name);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static NCD4node* lookFor(NClist* elems, const char* name, NCD4sort sort);
static NCD4node* lookupFQN(NCD4parser*, const char* sfqn, NCD4sort);
static int lookupFQNList(NCD4parser*, NClist* fqn, NCD4sort sort, NCD4node** result);
static NCD4node* makeAnonDim(NCD4parser*, const char* sizestr);
static int makeNode(NCD4parser*, NCD4node* parent, ezxml_t, NCD4sort, nc_type, NCD4node**);
static int makeNodeStatic(NCD4meta* meta, NCD4node* parent, NCD4sort sort, nc_type subsort, NCD4node** nodep);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int parseAtomicVar(NCD4parser*, NCD4node* container, ezxml_t xml, NCD4node**);
static int parseAttributes(NCD4parser*, NCD4node* container, ezxml_t xml);
static int parseDimensions(NCD4parser*, NCD4node* group, ezxml_t xml);
static int parseDimRefs(NCD4parser*, NCD4node* var, ezxml_t xml);
static int parseEconsts(NCD4parser*, NCD4node* en, ezxml_t xml);
static int parseEnumerations(NCD4parser*, NCD4node* group, ezxml_t dom);
static int parseFields(NCD4parser*, NCD4node* container, ezxml_t xml);
static int parseError(NCD4parser*, ezxml_t errxml);
static int parseGroups(NCD4parser*, NCD4node* group, ezxml_t dom);
static int parseMaps(NCD4parser*, NCD4node* var, ezxml_t xml);
static int parseMetaData(NCD4parser*, NCD4node* node, ezxml_t xml);
static int parseStructure(NCD4parser*, NCD4node* container, ezxml_t dom, NCD4node**);
static int parseSequence(NCD4parser*, NCD4node* container, ezxml_t dom,NCD4node**);
static int parseLL(const char* text, long long*);
static int parseULL(const char* text, unsigned long long*);
static int parseVariables(NCD4parser*, NCD4node* group, ezxml_t xml);
static int parseVariable(NCD4parser*, NCD4node* group, ezxml_t xml, NCD4node**);
static void reclaimParser(NCD4parser* parser);
static void record(NCD4parser*, NCD4node* node);
static int splitOrigType(NCD4parser*, const char* fqn, NCD4node* var);
static void track(NCD4meta*, NCD4node* node);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int traverse(NCD4parser*, ezxml_t dom);
#ifndef FIXEDOPAQUE
static int defineBytestringType(NCD4parser*);
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/***************************************************/
/* API */
int
NCD4_parse(NCD4meta* metadata)
{
int ret = NC_NOERR;
NCD4parser* parser = NULL;
int ilen;
ezxml_t dom = NULL;
/* fill in the atomic types for meta*/
metadata->atomictypes = nclistnew();
if((ret=defineAtomicTypes(metadata,metadata->atomictypes))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Create and fill in the parser state */
parser = (NCD4parser*)calloc(1,sizeof(NCD4parser));
if(parser == NULL) {ret=NC_ENOMEM; goto done;}
parser->metadata = metadata;
ilen = strlen(parser->metadata->serial.dmr);
dom = ezxml_parse_str(parser->metadata->serial.dmr,ilen);
if(dom == NULL) {ret=NC_ENOMEM; goto done;}
parser->types = nclistnew();
parser->dims = nclistnew();
parser->vars = nclistnew();
#ifdef D4DEBUG
parser->debuglevel = 1;
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/*Walk the DOM tree */
ret = traverse(parser,dom);
done:
if(dom != NULL)
ezxml_free(dom);
reclaimParser(parser);
return THROW(ret);
}
static void
reclaimParser(NCD4parser* parser)
{
if(parser == NULL) return;
nclistfree(parser->types);
nclistfree(parser->dims);
nclistfree(parser->vars);
nclistfree(parser->groups);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
free (parser);
}
/**************************************************/
/* Recursively walk the DOM tree to create the metadata */
static int
traverse(NCD4parser* parser, ezxml_t dom)
{
int ret = NC_NOERR;
/* See if we have an <Error> or <Dataset> */
if(strcmp(dom->name,"Error")==0) {
ret=parseError(parser,dom);
/* Report the error */
fprintf(stderr,"DAP4 Error: http-code=%d message=\"%s\" context=\"%s\"\n",
parser->metadata->error.httpcode,
parser->metadata->error.message,
parser->metadata->error.context);
fflush(stderr);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
ret=NC_EDMR;
goto done;
} else if(strcmp(dom->name,"Dataset")==0) {
const char* xattr = NULL;
if((ret=makeNode(parser,NULL,NULL,NCD4_GROUP,NC_NULL,&parser->metadata->root))) goto done;
parser->metadata->root->group.isdataset = 1;
parser->metadata->root->meta.id = parser->metadata->ncid;
parser->metadata->groupbyid = nclistnew();
SETNAME(parser->metadata->root,"/");
xattr = ezxml_attr(dom,"name");
if(xattr != NULL) parser->metadata->root->group.datasetname = strdup(xattr);
xattr = ezxml_attr(dom,"dapVersion");
if(xattr != NULL) parser->metadata->root->group.dapversion = strdup(xattr);
xattr = ezxml_attr(dom,"dmrVersion");
if(xattr != NULL) parser->metadata->root->group.dmrversion = strdup(xattr);
/* Recursively walk the tree */
if((ret = fillgroup(parser,parser->metadata->root,dom))) goto done;
} else
FAIL(NC_EINVAL,"Unexpected dom root name: %s",dom->name);
done:
return THROW(ret);
}
static int
fillgroup(NCD4parser* parser, NCD4node* group, ezxml_t xml)
{
int ret = NC_NOERR;
/* Extract Dimensions */
if((ret = parseDimensions(parser,group,xml))) goto done;
/* Extract Enum types */
if((ret = parseEnumerations(parser,group,xml))) goto done;
/* Extract variables */
if((ret = parseVariables(parser,group,xml))) goto done;
/* Extract subgroups*/
if((ret = parseGroups(parser,group,xml))) goto done;
/* Parse group level attributes */
if((ret = parseAttributes(parser,group,xml))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
return THROW(ret);
}
static int
parseDimensions(NCD4parser* parser, NCD4node* group, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
for(x=ezxml_child(xml, "Dimension");x != NULL;x = ezxml_next(x)) {
NCD4node* dimnode = NULL;
unsigned long long size;
const char* sizestr;
const char* unlimstr;
sizestr = ezxml_attr(x,"size");
if(sizestr == NULL)
FAIL(NC_EDIMSIZE,"Dimension has no size");
unlimstr = ezxml_attr(x,UCARTAGUNLIM);
if((ret = parseULL(sizestr,&size))) goto done;
if((ret=makeNode(parser,group,x,NCD4_DIM,NC_NULL,&dimnode))) goto done;
dimnode->dim.size = (long long)size;
dimnode->dim.isunlimited = (unlimstr != NULL);
/* Process attributes */
if((ret = parseAttributes(parser,dimnode,x))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
classify(group,dimnode);
}
done:
return THROW(ret);
}
static int
parseEnumerations(NCD4parser* parser, NCD4node* group, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
for(x=ezxml_child(xml, "Enumeration");x != NULL;x = ezxml_next(x)) {
NCD4node* node = NULL;
NCD4node* basetype = NULL;
const char* fqn = ezxml_attr(x,"basetype");
basetype = lookupFQN(parser,fqn,NCD4_TYPE);
if(basetype == NULL) {
FAIL(NC_EBADTYPE,"Enumeration has unknown type: ",fqn);
}
if((ret=makeNode(parser,group,x,NCD4_TYPE,NC_ENUM,&node))) goto done;
node->basetype = basetype;
if((ret=parseEconsts(parser,node,x))) goto done;
if(nclistlength(node->en.econsts) == 0)
FAIL(NC_EINVAL,"Enumeration has no values");
classify(group,node);
/* Finally, see if this type has UCARTAGORIGTYPE xml attribute */
if(parser->metadata->controller->controls.translation == NCD4_TRANSNC4) {
const char* typetag = ezxml_attr(x,UCARTAGORIGTYPE);
if(typetag != NULL) {
}
}
}
done:
return THROW(ret);
}
static int
parseEconsts(NCD4parser* parser, NCD4node* en, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
NClist* econsts = nclistnew();
for(x=ezxml_child(xml, "EnumConst");x != NULL;x = ezxml_next(x)) {
NCD4node* ec = NULL;
const char* name;
const char* svalue;
name = ezxml_attr(x,"name");
if(name == NULL) FAIL(NC_EBADNAME,"Enum const with no name");
if((ret=makeNode(parser,en,x,NCD4_ECONST,NC_NULL,&ec))) goto done ;
svalue = ezxml_attr(x,"value");
if(svalue == NULL)
FAIL(NC_EINVAL,"Enumeration Constant has no value");
if((ret=convertString(&ec->en.ecvalue,en->basetype,svalue)))
FAIL(NC_EINVAL,"Non-numeric Enumeration Constant: %s->%s",ec->name,svalue);
PUSH(econsts,ec);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
en->en.econsts = econsts;
done:
return THROW(ret);
}
static int
parseVariables(NCD4parser* parser, NCD4node* group, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
for(x=xml->child;x != NULL;x=x->ordered) {
NCD4node* node = NULL;
const KEYWORDINFO* info = keyword(x->name);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(info == NULL)
FAIL(NC_ETRANSLATION,"Unexpected node type: %s",x->name);
/* Check if we need to process this node */
if(!ISVAR(info->sort)) continue; /* Handle elsewhere */
node = NULL;
ret = parseVariable(parser,group,x,&node);
if(ret != NC_NOERR || node == NULL) break;
}
done:
return THROW(ret);
}
static int
parseVariable(NCD4parser* parser, NCD4node* container, ezxml_t xml, NCD4node** nodep)
{
int ret = NC_NOERR;
NCD4node* node = NULL;
const KEYWORDINFO* info = keyword(xml->name);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
switch (info->subsort) {
case NC_STRUCT:
ret = parseStructure(parser,container,xml,&node);
break;
case NC_SEQ:
ret = parseSequence(parser,container,xml,&node);
break;
default:
ret = parseAtomicVar(parser,container,xml,&node);
}
*nodep = node;
return THROW(ret);
}
static int
parseMetaData(NCD4parser* parser, NCD4node* container, ezxml_t xml)
{
int ret = NC_NOERR;
/* Process dimrefs */
if((ret=parseDimRefs(parser,container,xml))) goto done;
/* Process attributes */
if((ret = parseAttributes(parser,container,xml))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Process maps */
if((ret = parseMaps(parser,container,xml))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
return THROW(ret);
}
static int
parseStructure(NCD4parser* parser, NCD4node* container, ezxml_t xml, NCD4node** nodep)
{
int ret = NC_NOERR;
NCD4node* var = NULL;
NCD4node* type = NULL;
NCD4node* group = NULL;
char* fqnname = NULL;
group = NCD4_groupFor(container); /* default: put type in the same group as var */
/* Make the structure as a variable with same name as structure; will be fixed later */
if((ret=makeNode(parser,container,xml,NCD4_VAR,NC_STRUCT,&var))) goto done;
classify(container,var);
/* Make the structure as a type with (for now) partial fqn name from the variable */
if((ret=makeNode(parser,group,xml,NCD4_TYPE,NC_STRUCT,&type))) goto done;
classify(group,type);
/* Set the basetype */
var->basetype = type;
/* Now change the struct typename */
fqnname = NCD4_makeName(var,"_");
if(fqnname == NULL)
FAIL(NC_ENOMEM,"Out of memory");
SETNAME(type,fqnname);
/* Parse Fields into the type */
if((ret = parseFields(parser,type,xml))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Parse attributes, dims, and maps into the var */
if((ret = parseMetaData(parser,var,xml))) goto done;
record(parser,var);
/* See if this var has UCARTAGORIGTYPE attribute */
if(parser->metadata->controller->controls.translation == NCD4_TRANSNC4) {
const char* typetag = ezxml_attr(xml,UCARTAGORIGTYPE);
if(typetag != NULL) {
/* yes, place it on the type */
if((ret=addOrigType(parser,var,type,typetag))) goto done;
}
}
if(nodep) *nodep = var;
done:
nullfree(fqnname);
return THROW(ret);
}
static int
parseFields(NCD4parser* parser, NCD4node* container, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
for(x=xml->child;x != NULL;x=x->ordered) {
NCD4node* node = NULL;
const KEYWORDINFO* info = keyword(x->name);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(!ISVAR(info->sort)) continue; /* not a field */
ret = parseVariable(parser,container,x,&node);
if(ret) goto done;
}
done:
return THROW(ret);
}
/*
Specialized version of parseFields that is used
to attach a singleton field to a vlentype
*/
static int
parseVlenField(NCD4parser* parser, NCD4node* container, ezxml_t xml, NCD4node** fieldp)
{
int ret = NC_NOERR;
NCD4node* field = NULL;
ezxml_t x;
for(x=xml->child;x != NULL;x=x->ordered) {
const KEYWORDINFO* info = keyword(x->name);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(!ISVAR(info->sort)) continue; /* not a field */
if(field != NULL)
{ret = NC_EBADTYPE; goto done;}
if((ret = parseVariable(parser,container,x,&field)))
goto done;
}
if(fieldp) *fieldp = field;
done:
return THROW(ret);
}
static int
parseSequence(NCD4parser* parser, NCD4node* container, ezxml_t xml, NCD4node** nodep)
{
int ret = NC_NOERR;
NCD4node* var = NULL;
NCD4node* structtype = NULL;
NCD4node* vlentype = NULL;
NCD4node* group = NULL;
char name[NC_MAX_NAME];
char* fqnname = NULL;
int usevlen = 0;
group = NCD4_groupFor(container);
/* Convert a sequence variable into two or three things:
1. a compound type representing the fields of the sequence.
2. a vlen type whose basetype is #1
3. a variable whose basetype is #2.
If we can infer that the sequence was riginally produced
2019-09-18 10:27:43 +08:00
from a netcdf-4 vlen, then we can avoid creating #1.
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
Naming is as follows. Assume the var name is V
and the NCD4_makeName of the var is V1..._Vn.
1. var name is V.
2. vlen type is V1..._VN_t
3. compound type (if any) is V1..._VN_cmpd (Note, d4meta will append _t to this)
*/
/* Determine if we need to build a structure type or can go straight to a vlen
Test: UCARTAGVLEN xml attribute is set
*/
if(parser->metadata->controller->controls.translation == NCD4_TRANSNC4) {
const char* vlentag = ezxml_attr(xml,UCARTAGVLEN);
if(vlentag != NULL)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
usevlen = 1;
} else
usevlen = 0;
/* make secondary names from the var fqn name */
if(usevlen) {
/* Parse the singleton field and then use it to fix up the var */
if((ret=parseVlenField(parser,container,xml,&var)))
goto done;
/* compute a partial fqn */
fqnname = NCD4_makeName(var,"_");
if(fqnname == NULL)
{ret = NC_ENOMEM; goto done;}
/* Now, create the vlen type using the field's basetype */
if((ret=makeNode(parser,group,xml,NCD4_TYPE,NC_SEQ,&vlentype))) goto done;
classify(group,vlentype);
vlentype->basetype = var->basetype;
/* Use name <fqnname>_t */
strncpy(name,fqnname,sizeof(name));
strncat(name,"_t", sizeof(name) - strlen(name) - 1);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
SETNAME(vlentype,name);
/* Set the basetype */
var->basetype = vlentype;
} else {
/* Start by creating the var node; will be fixed up later */
if((ret=makeNode(parser,container,xml,NCD4_VAR,NC_SEQ,&var))) goto done;
classify(container,var);
fqnname = NCD4_makeName(var,"_");
if(fqnname == NULL)
{ret = NC_ENOMEM; goto done;}
if((ret=makeNode(parser,group,xml,NCD4_TYPE,NC_STRUCT,&structtype))) goto done;
classify(group,structtype);
/* Use name <fqnname>_base */
strncpy(name,fqnname,sizeof(name));
strncat(name,"_base", sizeof(name) - strlen(name) - 1);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
SETNAME(structtype,name);
/* Parse Fields into type */
if((ret = parseFields(parser,structtype,xml))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Create a seq type whose basetype is the compound type */
if((ret=makeNode(parser,group,xml,NCD4_TYPE,NC_SEQ,&vlentype))) goto done;
classify(group,vlentype);
/* Use name <xname>_t */
strncpy(name,fqnname,sizeof(name));
strncat(name,"_t", sizeof(name) - strlen(name) - 1);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
SETNAME(vlentype,name);
vlentype->basetype = structtype;
/* Set the basetype */
var->basetype = vlentype;
}
/* Parse attributes, dims, and maps into var*/
if((ret = parseMetaData(parser,var,xml))) goto done;
record(parser,var);
/* See if this var has UCARTAGORIGTYPE attribute */
if(parser->metadata->controller->controls.translation == NCD4_TRANSNC4) {
const char* typetag = ezxml_attr(xml,UCARTAGORIGTYPE);
if(typetag != NULL) {
/* yes, place it on the type */
if((ret=addOrigType(parser,var,vlentype,typetag))) goto done;
}
}
if(nodep) *nodep = var;
done:
if(fqnname) free(fqnname);
return THROW(ret);
}
static int
parseGroups(NCD4parser* parser, NCD4node* parent, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
for(x=ezxml_child(xml, "Group");x != NULL;x = ezxml_next(x)) {
NCD4node* group = NULL;
const char* name = ezxml_attr(x,"name");
if(name == NULL) FAIL(NC_EBADNAME,"Group has no name");
if((ret=makeNode(parser,parent,x,NCD4_GROUP,NC_NULL,&group))) goto done;
group->group.varbyid = nclistnew();
if((ret = fillgroup(parser,group,x))) goto done;
/* Parse group attributes */
if((ret = parseAttributes(parser,group,x))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
PUSH(parent->groups,group);
}
done:
return THROW(ret);
}
static int
parseAtomicVar(NCD4parser* parser, NCD4node* container, ezxml_t xml, NCD4node** nodep)
{
int ret = NC_NOERR;
NCD4node* node = NULL;
NCD4node* base = NULL;
const char* typename;
const KEYWORDINFO* info;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
NCD4node* group;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Check for aliases */
for(typename=xml->name;;) {
info = keyword(typename);
if(info->aliasfor == NULL) break;
typename = info->aliasfor;
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
group = NCD4_groupFor(container);
/* Locate its basetype; handle opaque and enum separately */
if(info->subsort == NC_ENUM) {
const char* enumfqn = ezxml_attr(xml,"enum");
if(enumfqn == NULL)
base = NULL;
else
base = lookupFQN(parser,enumfqn,NCD4_TYPE);
} else if(info->subsort == NC_OPAQUE) {
/* See if the xml references an opaque type name */
base = getOpaque(parser,xml,group);
} else {
base = lookupFQN(parser,info->tag,NCD4_TYPE);
}
if(base == NULL || !ISTYPE(base->sort)) {
FAIL(NC_EBADTYPE,"Unexpected variable type: %s",info->tag);
}
if((ret=makeNode(parser,container,xml,NCD4_VAR,base->subsort,&node))) goto done;
classify(container,node);
node->basetype = base;
/* Parse attributes, dims, and maps */
if((ret = parseMetaData(parser,node,xml))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* See if this var has UCARTAGORIGTYPE attribute */
if(parser->metadata->controller->controls.translation == NCD4_TRANSNC4) {
const char* typetag = ezxml_attr(xml,UCARTAGORIGTYPE);
if(typetag != NULL) {
/* yes, place it on the type */
if((ret=addOrigType(parser,node,node,typetag))) goto done;
}
}
if(nodep) *nodep = node;
done:
return THROW(ret);
}
static int
parseDimRefs(NCD4parser* parser, NCD4node* var, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
for(x=ezxml_child(xml, "Dim");x!= NULL;x=ezxml_next(x)) {
NCD4node* dim = NULL;
const char* fqn;
fqn = ezxml_attr(x,"name");
if(fqn != NULL) {
dim = lookupFQN(parser,fqn,NCD4_DIM);
if(dim == NULL) {
FAIL(NC_EBADDIM,"Cannot locate dim with name: %s",fqn);
}
} else {
const char* sizestr = ezxml_attr(x,"size");
if(sizestr == NULL) {
FAIL(NC_EBADDIM,"Dimension reference has no name and no size");
}
/* Make or reuse anonymous dimension in root group */
dim = makeAnonDim(parser,sizestr);
if(dim == NULL)
FAIL(NC_EBADDIM,"Cannot create anonymous dimension for size: %s",sizestr);
}
PUSH(var->dims,dim);
}
done:
return THROW(ret);
}
static int
parseMaps(NCD4parser* parser, NCD4node* var, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
for(x=ezxml_child(xml, "Map");x!= NULL;x=ezxml_next(x)) {
NCD4node* mapref = NULL;
const char* fqn;
fqn = ezxml_attr(x,"name");
if(fqn == NULL)
FAIL(NC_ENOTVAR,"<Map> has no name attribute");
mapref = lookupFQN(parser,fqn,NCD4_VAR);
if(mapref == NULL)
FAIL(NC_ENOTVAR,"<Map> name does not refer to a variable: %s",fqn);
PUSH(var->maps,mapref);
}
done:
return THROW(ret);
}
static int
parseAttributes(NCD4parser* parser, NCD4node* container, ezxml_t xml)
{
int ret = NC_NOERR;
ezxml_t x;
NClist* values = NULL;
/* First, transfer any reserved xml attributes */
{
int count = 0;
const char** all = NULL;
all = ezxml_all_attr(xml,&count);
if(all != NULL && count > 0) {
const char** p;
container->xmlattributes = nclistnew();
for(p=all;*p;p+=2) {
if(isReserved(*p)) {
nclistpush(container->xmlattributes,strdup(p[0]));
nclistpush(container->xmlattributes,strdup(p[1]));
}
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
}
for(x=ezxml_child(xml, "Attribute");x!= NULL;x=ezxml_next(x)) {
const char* name = ezxml_attr(x,"name");
const char* type = ezxml_attr(x,"type");
NCD4node* attr = NULL;
NCD4node* basetype;
if(name == NULL) FAIL(NC_EBADNAME,"Missing <Attribute> name");
#ifdef HYRAXHACK
/* Hyrax specifies type="container" for container types */
if(strcmp(type,"container")==0
|| strcmp(type,"Container")==0)
type = NULL;
#endif
if(type == NULL) {
/* <Attribute> containers not supported; ignore */
continue;
}
if((ret=makeNode(parser,container,x,NCD4_ATTR,NC_NULL,&attr))) goto done;
basetype = lookupFQN(parser,type,NCD4_TYPE);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(basetype == NULL)
FAIL(NC_EBADTYPE,"Unknown <Attribute> type: %s",type);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(basetype->subsort == NC_NAT && basetype->subsort != NC_ENUM)
FAIL(NC_EBADTYPE,"<Attribute> type must be atomic or enum: %s",type);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
attr->basetype = basetype;
values = nclistnew();
if((ret=getValueStrings(parser,basetype,x,values))) {
FAIL(NC_EINVAL,"Malformed attribute: %s",name);
}
attr->attr.values = values; values = NULL;
PUSH(container->attributes,attr);
}
done:
if(ret != NC_NOERR) {
nclistfreeall(values);
}
return THROW(ret);
}
static int
parseError(NCD4parser* parser, ezxml_t errxml)
{
const char* shttpcode = ezxml_attr(errxml,"httpcode");
ezxml_t x;
if(shttpcode == NULL) shttpcode = "400";
if(sscanf(shttpcode,"%d",&parser->metadata->error.httpcode) != 1)
nclog(NCLOGERR,"Malformed <ERROR> response");
x=ezxml_child(errxml, "Message");
if(x != NULL) {
const char* txt = ezxml_txt(x);
parser->metadata->error.message = (txt == NULL ? NULL : strdup(txt));
}
x=ezxml_child(errxml, "Context");
if(x != NULL) {
const char* txt = ezxml_txt(x);
parser->metadata->error.context = (txt == NULL ? NULL : strdup(txt));
}
x=ezxml_child(errxml, "OtherInformation");
if(x != NULL) {
const char* txt = ezxml_txt(x);
parser->metadata->error.otherinfo = (txt == NULL ? NULL : strdup(txt));
}
return THROW(NC_NOERR);
}
/*
Find or create an opaque type
*/
static NCD4node*
getOpaque(NCD4parser* parser, ezxml_t varxml, NCD4node* group)
{
int i, ret = NC_NOERR;
long long len;
NCD4node* opaquetype = NULL;
const char* xattr;
#ifndef FIXEDOPAQUE
len = 0;
#else
len = parser->metadata->controller->controls.opaquesize;
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(parser->metadata->controller->controls.translation == NCD4_TRANSNC4) {
/* See if this var has UCARTAGOPAQUE attribute */
xattr = ezxml_attr(varxml,UCARTAGOPAQUE);
if(xattr != NULL) {
long long tmp = 0;
if((ret = parseLL(xattr,&tmp)) || (tmp < 0))
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
FAIL(NC_EINVAL,"Illegal opaque len: %s",xattr);
len = tmp;
}
}
#ifndef FIXEDOPAQUE
if(len == 0) {
/* Need to use _bytestring */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if((ret=defineBytestringType(parser)))
goto done;
assert(parser->metadata->_bytestring != NULL);
opaquetype = parser->metadata->_bytestring;
} else
#endif
{ /*(len > 0) || FIXEDOPAQUE */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Try to locate existing opaque type with this length */
for(i=0;i<nclistlength(parser->types); i++) {
NCD4node* op = (NCD4node*)nclistget(parser->types,i);
if(op->subsort != NC_OPAQUE) continue;
if(op->opaque.size == len) {opaquetype = op; break;}
}
if(opaquetype == NULL) {/* create it */
char name[NC_MAX_NAME+1];
/* Make name be "opaqueN" */
snprintf(name,NC_MAX_NAME,"opaque%lld_t",len);
/* Opaque types are always created in the current group */
if((ret=makeNode(parser,group,NULL,NCD4_TYPE,NC_OPAQUE,&opaquetype)))
goto done;
SETNAME(opaquetype,name);
opaquetype->opaque.size = len;
if(opaquetype != NULL)
record(parser,opaquetype);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
}
done:
return opaquetype;
}
/* get all value strings */
static int
getValueStrings(NCD4parser* parser, NCD4node* type, ezxml_t xattr, NClist* svalues)
{
const char* s;
/* See first if we have a "value" xml attribute */
s = ezxml_attr(xattr,"value");
if(s != NULL)
PUSH(svalues,strdup(s));
else {/* look for <Value> subnodes */
ezxml_t x;
for(x=ezxml_child(xattr, "Value");x != NULL;x = ezxml_next(x)) {
char* es;
char* ds;
/* We assume that either their is a single xml attribute called "value",
or there is a single chunk of text containing possibly multiple values.
*/
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
s = ezxml_attr(x,"value");
if(s == NULL) {/* See if there is a text part. */
s = x->txt;
if(s == NULL) s = "";
}
/* Need to de-escape the string */
es = NCD4_entityescape(s);
ds = NCD4_deescape(es);
nclistpush(svalues,ds);
nullfree(es);
}
}
return THROW(NC_NOERR);
}
/***************************************************/
/* Utilities */
NCD4node*
NCD4_groupFor(NCD4node* node)
{
while(node->sort != NCD4_GROUP) node = node->container;
return node;
}
/* Determine is a name is reserved */
static int
isReserved(const char* name)
{
if(name == NULL) return 0;
return (name[0] == RESERVECHAR);
}
/* If a node has the UCARTAGORIGTYPE attribute,
then capture that annotation. */
static int
addOrigType(NCD4parser* parser, NCD4node* src, NCD4node* dst, const char* oldname)
{
int ret = NC_NOERR;
if(dst == NULL) dst = src;
/* Record the original type in the destination*/
if((ret=splitOrigType(parser,oldname,dst))) goto done;
done:
return THROW(ret);
}
static int
splitOrigType(NCD4parser* parser, const char* fqn, NCD4node* type)
{
int ret = NC_NOERR;
NClist* pieces = nclistnew();
NCD4node* group = NULL;
char* name = NULL;
if((ret=NCD4_parseFQN(fqn,pieces))) goto done;
/* It should be the case that the pieces are {/group}+/name */
name = (char*)nclistpop(pieces);
if((ret = lookupFQNList(parser,pieces,NCD4_GROUP,&group))) goto done;
if(ret) {
FAIL(NC_ENOGRP,"Non-existent group in FQN: ",fqn);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
type->nc4.orig.name = strdup(name+1); /* plus 1 to skip the leading separator */
type->nc4.orig.group = group;
done:
return THROW(ret);
}
/* Locate an attribute.
If not found, then *attrp will be null
*/
NCD4node*
NCD4_findAttr(NCD4node* container, const char* attrname)
{
int i;
/* Look directly under this xml for <Attribute> */
for(i=0;i<nclistlength(container->attributes);i++) {
NCD4node* attr = (NCD4node*)nclistget(container->attributes,i);
if(strcmp(attr->name,attrname)!=0) continue;
return attr;
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
return NULL;
}
/*
Parse a simple string of digits into an unsigned long long
Return the value.
*/
static int
parseULL(const char* text, unsigned long long* ullp)
{
extern int errno;
char* endptr;
unsigned long long uint64 = 0;
errno = 0; endptr = NULL;
#ifdef HAVE_STRTOULL
uint64 = strtoull(text,&endptr,10);
if(errno == ERANGE)
return THROW(NC_ERANGE);
#else /*!(defined HAVE_STRTOLL && defined HAVE_STRTOULL)*/
sscanf((char*)text, "%llu", &uint64);
/* Have no useful way to detect out of range */
#endif /*!(defined HAVE_STRTOLL && defined HAVE_STRTOULL)*/
if(ullp) *ullp = uint64;
return THROW(NC_NOERR);
}
/*
Parse a simple string of digits into an signed long long
Return the value.
*/
static int
parseLL(const char* text, long long* llp)
{
extern int errno;
char* endptr;
long long int64 = 0;
errno = 0; endptr = NULL;
#ifdef HAVE_STRTOLL
int64 = strtoll(text,&endptr,10);
if(errno == ERANGE)
return THROW(NC_ERANGE);
#else /*!(defined HAVE_STRTOLL && defined HAVE_STRTOLL)*/
sscanf((char*)text, "%lld", &int64);
/* Have no useful way to detect out of range */
#endif /*!(defined HAVE_STRTOLL && defined HAVE_STRTOLL)*/
if(llp) *llp = int64;
return THROW(NC_NOERR);
}
/*
Convert a sequence of fqn names into a specific node.
WARNING: This is highly specialized in that it assumes
that the final object is one of: dimension, type, or var.
This means that e.g. groups, attributes, econsts, cannot
be found by this procedure.
@return NC_NOERR found; result != NULL
@return NC_EINVAL !found; result == NULL
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
*/
static int
lookupFQNList(NCD4parser* parser, NClist* fqn, NCD4sort sort, NCD4node** result)
{
int ret = NC_NOERR;
int i,nsteps;
NCD4node* current;
char* name = NULL;
NCD4node* node = NULL;
/* Step 1: walk thru groups until can go no further */
current = parser->metadata->root;
nsteps = nclistlength(fqn);
for(i=1;i<nsteps;i++) { /* start at 1 to side-step root name */
assert(ISGROUP(current->sort));
name = (char*)nclistget(fqn,i);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* See if we can find a matching subgroup */
node = lookFor(current->group.elements,name,NCD4_GROUP);
if(node == NULL)
break; /* reached the end of the group part of the fqn */
current = node;
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Invariant:
1. i == nsteps => node != null => last node was a group:
it must be our target
2. i == (nsteps-1) => non-group node at the end; disambiguate
3. i < (nsteps - 1) => need a compound var to continue
*/
if(i == nsteps) {
if(sort != NCD4_GROUP) /* Right name, wrong sort */
goto notfound;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
if(i == (nsteps - 1)) {
assert (node == NULL);
node = lookFor(current->group.elements,name,sort);
if(node == NULL) goto notfound;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
goto done;
}
assert (i < (nsteps - 1)); /* case 3 */
/* We have steps to take, so node better be a compound var */
node = lookFor(current->group.elements,name,NCD4_VAR);
if(node == NULL || !ISCMPD(node->basetype->subsort))
goto notfound;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* So we are at a compound variable, so walk its fields recursively */
/* Use the type to do the walk */
current = node->basetype;
assert (i < (nsteps - 1));
i++; /* skip variable name */
for(;;i++) {
int j;
name = (char*)nclistget(fqn,i);
assert(ISTYPE(current->sort) && ISCMPD(current->subsort));
for(node=NULL,j=0;j<nclistlength(current->vars);j++) {
NCD4node* field = (NCD4node*)nclistget(current->vars,j);
if(strcmp(field->name,name)==0)
{node = field; break;}
}
if(node == NULL)
goto notfound; /* no match, so failed */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(i == (nsteps - 1))
break;
if(!ISCMPD(node->basetype->subsort))
goto notfound; /* more steps, but no compound field, so failed */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
current = node->basetype;
}
done:
if(result) *result = node;
return THROW(ret);
notfound:
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
ret = NC_EINVAL;
goto done;
}
static NCD4node*
lookFor(NClist* elems, const char* name, NCD4sort sort)
{
int n,i;
if(elems == NULL || nclistlength(elems) == 0) return NULL;
n = nclistlength(elems);
for(i=0;i<n;i++) {
NCD4node* node = (NCD4node*)nclistget(elems,i);
if(strcmp(node->name,name) == 0 && (sort == node->sort))
return node;
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
return NULL;
}
void
NCD4_printElems(NCD4node* group)
{
int n,i;
NClist* elems;
elems = group->group.elements;
if(elems == NULL || nclistlength(elems) == 0) return;
n = nclistlength(elems);
for(i=0;i<n;i++) {
NCD4node* node = (NCD4node*)nclistget(elems,i);
fprintf(stderr,"name=%s sort=%d subsort=%d\n",
node->name,node->sort,node->subsort);
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
fflush(stderr);
}
static NCD4node*
lookupFQN(NCD4parser* parser, const char* sfqn, NCD4sort sort)
{
int ret = NC_NOERR;
NClist* fqnlist = nclistnew();
NCD4node* match = NULL;
/* Short circuit atomic types */
if(NCD4_TYPE == sort) {
match = lookupAtomicType(parser->metadata->atomictypes,(sfqn[0]=='/'?sfqn+1:sfqn));
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(match != NULL)
goto done;
}
if((ret=NCD4_parseFQN(sfqn,fqnlist))) goto done;
if((ret=lookupFQNList(parser,fqnlist,sort,&match))) goto done;
done:
nclistfreeall(fqnlist);
return (ret == NC_NOERR ? match : NULL);
}
static const KEYWORDINFO*
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
keyword(const char* name)
{
int n = sizeof(keywordmap)/sizeof(KEYWORDINFO);
int L = 0;
int R = (n - 1);
int m, cmp;
const struct KEYWORDINFO* p;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
for(;;) {
if(L > R) break;
m = (L + R) / 2;
p = &keywordmap[m];
cmp = strcasecmp(p->tag,name);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(cmp == 0) return p;
if(cmp < 0)
L = (m + 1);
else /*cmp > 0*/
R = (m - 1);
}
return NULL;
}
#ifndef FIXEDOPAQUE
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int
defineBytestringType(NCD4parser* parser)
{
int ret = NC_NOERR;
NCD4node* bstring = NULL;
if(parser->metadata->_bytestring == NULL) {
/* Construct a single global opaque type for mapping DAP opaque type */
ret = makeNode(parser,parser->metadata->root,NULL,NCD4_TYPE,NC_OPAQUE,&bstring);
if(ret != NC_NOERR) goto done;
SETNAME(bstring,"_bytestring");
bstring->opaque.size = 0;
bstring->basetype = lookupAtomicType(parser,"UInt8");
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
PUSH(parser->metadata->root->types,bstring);
parser->metadata->_bytestring = bstring;
} else
bstring = parser->metadata->_bytestring;
done:
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
return THROW(ret);
}
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int
defineAtomicTypes(NCD4meta* meta, NClist* list)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
NCD4node* node;
const struct ATOMICTYPEINFO* ati;
if(list == NULL)
return THROW(NC_EINTERNAL);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
for(ati=atomictypeinfo;ati->name;ati++) {
if((ret=makeNodeStatic(meta,NULL,NCD4_TYPE,ati->type,&node))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
SETNAME(node,ati->name);
PUSH(list,node);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
done:
return THROW(ret);
}
/* Binary search the set of set of atomictypes */
static NCD4node*
lookupAtomicType(NClist* atomictypes, const char* name)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int n = nclistlength(atomictypes);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
int L = 0;
int R = (n - 1);
int m, cmp;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
NCD4node* p;
for(;;) {
if(L > R) break;
m = (L + R) / 2;
p = (NCD4node*)nclistget(atomictypes,m);
cmp = strcasecmp(p->name,name);
if(cmp == 0)
return p;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(cmp < 0)
L = (m + 1);
else /*cmp > 0*/
R = (m - 1);
}
return NULL;
}
/**************************************************/
static int
makeNode(NCD4parser* parser, NCD4node* parent, ezxml_t xml, NCD4sort sort, nc_type subsort, NCD4node** nodep)
{
int ret = NC_NOERR;
NCD4node* node = NULL;
assert(parser);
if((ret = makeNodeStatic(parser->metadata,parent,sort,subsort,&node))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Set node name, if it exists */
if(xml != NULL) {
const char* name = ezxml_attr(xml,"name");
if(name != NULL) {
if(strlen(name) > NC_MAX_NAME) {
nclog(NCLOGERR,"Name too long: %s",name);
}
SETNAME(node,name);
}
}
if(nodep) *nodep = node;
done:
return ret;
}
static int
makeNodeStatic(NCD4meta* meta, NCD4node* parent, NCD4sort sort, nc_type subsort, NCD4node** nodep)
{
int ret = NC_NOERR;
NCD4node* node = (NCD4node*)calloc(1,sizeof(NCD4node));
assert(meta);
if(node == NULL) return THROW(NC_ENOMEM);
node->sort = sort;
node->subsort = subsort;
node->container = parent;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(parent != NULL) {
if(parent->sort == NCD4_GROUP)
PUSH(parent->group.elements,node);
}
track(meta,node);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(nodep) *nodep = node;
return THROW(ret);
}
static NCD4node*
makeAnonDim(NCD4parser* parser, const char* sizestr)
{
long long size = 0;
int ret;
char name[NC_MAX_NAME+1];
NCD4node* dim = NULL;
NCD4node* root = parser->metadata->root;
ret = parseLL(sizestr,&size);
if(ret) return NULL;
snprintf(name,NC_MAX_NAME,"/_Anonymous%lld",size);
/* See if it exists already */
dim = lookupFQN(parser,name,NCD4_DIM);
if(dim == NULL) {/* create it */
if((ret=makeNode(parser,root,NULL,NCD4_DIM,NC_NULL,&dim))) goto done;
SETNAME(dim,name+1); /* leave out the '/' separator */
dim->dim.size = (long long)size;
dim->dim.isanonymous = 1;
PUSH(root->dims,dim);
}
done:
return (ret?NULL:dim);
}
/*
Classify inserts the node into the proper container list
based on the node's sort.
*/
static void
classify(NCD4node* container, NCD4node* node)
{
if(ISGROUP(container->sort))
nclistpush(container->group.elements,node);
switch (node->sort) {
case NCD4_GROUP:
PUSH(container->groups,node);
break;
case NCD4_DIM:
PUSH(container->dims,node);
break;
case NCD4_TYPE:
PUSH(container->types,node);
break;
case NCD4_VAR:
PUSH(container->vars,node);
break;
case NCD4_ATTR: case NCD4_XML:
PUSH(container->attributes,node);
break;
default: break;
}
}
/*
Classify inserts the node into the proper parser global list
based on the node's sort.
*/
static void
record(NCD4parser* parser, NCD4node* node)
{
switch (node->sort) {
case NCD4_GROUP:
PUSH(parser->groups,node);
break;
case NCD4_DIM:
PUSH(parser->dims,node);
break;
case NCD4_TYPE:
PUSH(parser->types,node);
break;
case NCD4_VAR:
PUSH(parser->vars,node);
break;
default: break;
}
}
/*
Undo a classify and record
for a field node.
Used by buildSequenceType.
*/
#if 0
static void
forget(NCD4parser* parser, NCD4node* var)
{
int i;
NCD4node* container = var->container;
assert(ISVAR(var->sort) && ISTYPE(container->sort) && ISCMPD(container->subsort));
/* Unrecord: remove from the parser lists */
for(i=0;i<parser->vars;i++) {
NCD4node* test = nclistget(parser->vars,i);
if(test == var) {
nclistremove(parser->vars,i);
break;
}
}
/* Unclassify: remove from the container var list */
for(i=0;i<container->vars;i++) {
NCD4node* test = nclistget(container->vars,i);
if(test == var) {
nclistremove(container->vars,i);
break;
}
}
}
#endif
static void
track(NCD4meta* meta, NCD4node* node)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
#ifdef D4DEBUG
fprintf(stderr,"track: node=%lx sort=%d subsort=%d",(unsigned long)node,node->sort,node->subsort);
if(node->name != NULL)
fprintf(stderr," name=%s\n",node->name);
fprintf(stderr,"\n");
#endif
PUSH(meta->allnodes,node);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#ifdef D4DEBUG
fprintf(stderr,"track: |allnodes|=%ld\n",nclistlength(meta->allnodes));
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
fflush(stderr);
#endif
}
/**************************************************/
static int
convertString(union ATOMICS* converter, NCD4node* type, const char* s)
{
switch (type->subsort) {
case NC_BYTE:
case NC_SHORT:
case NC_INT:
case NC_INT64:
if(sscanf(s,"%lld",converter->i64) != 1) return THROW(NC_ERANGE);
break;
case NC_UBYTE:
case NC_USHORT:
case NC_UINT:
case NC_UINT64:
if(sscanf(s,"%llu",converter->u64) != 1) return THROW(NC_ERANGE);
break;
case NC_FLOAT:
case NC_DOUBLE:
if(sscanf(s,"%lf",converter->f64) != 1) return THROW(NC_ERANGE);
break;
case NC_STRING:
converter->s[0]= strdup(s);
break;
}/*switch*/
return downConvert(converter,type);
}
static int
downConvert(union ATOMICS* converter, NCD4node* type)
{
unsigned long long u64 = converter->u64[0];
long long i64 = converter->i64[0];
double f64 = converter->f64[0];
char* s = converter->s[0];
switch (type->subsort) {
case NC_BYTE:
converter->i8[0] = (char)i64;
break;
case NC_UBYTE:
converter->u8[0] = (unsigned char)u64;
break;
case NC_SHORT:
converter->i16[0] = (short)i64;
break;
case NC_USHORT:
converter->u16[0] = (unsigned short)u64;
break;
case NC_INT:
converter->i32[0] = (int)i64;
break;
case NC_UINT:
converter->u32[0] = (unsigned int)u64;
break;
case NC_INT64:
converter->i64[0] = i64;
break;
case NC_UINT64:
converter->u64[0]= u64;
break;
case NC_FLOAT:
converter->f32[0] = (float)f64;
break;
case NC_DOUBLE:
converter->f64[0] = f64;
break;
case NC_STRING:
converter->s[0]= s;
break;
}/*switch*/
return THROW(NC_NOERR);
}
#if 0
/* Try to remove excess text from a value set */
static int
valueParse(NCD4node* type, const char* values0, NClist* vlist)
{
char* values;
char* p;
char* q;
char* s;
char* line;
ptrdiff_t len;
if(values0 == NULL || (len=strlen(values0)) == 0)
return THROW(NC_NOERR);
values = strdup(values0);
/* Compress the text by removing sequences of blanks and newlines:
note that this will fail for string typed values that might have
embedded blanks, so in that case, we assume each string is on a separate line.
For NC_CHAR, we treat like strings, except we use the last char in the line
as the value. This is all heuristic.
*/
switch (type->subsort) {
case NC_STRING:
p = values;
for(;;) {
if(*p == '\0') break;
line = p;
/* Start by looking for \n or \r\n */
for(;*p;p++) {if(*p == '\n') break;}
q = p - 1;
*p++ = '\0';
if(*q == '\r') {*q = '\0';}
nclistpush(vlist,strdup(line));
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_CHAR:
p = values;
for(;*p;) {
char c[2];
line = p;
/* Start by looking for \n or \r\n */
for(;*p;p++) {if(*p == '\n') break;}
q = p;
*p++ = '\0';
q--;
if(*q == '\r') {*q = '\0';}
len = strlen(line);
if(len > 0) {
c[0] = *q;
c[1] = '\0';
nclistpush(vlist,strdup(c));
}
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
default:
p = values;
for(;*p;p++) {if(*p <= ' ') *p = '\n';}
line = values;
for(p=line;*p;p++) {if(*p == '\n') break;}
for(line=values;*line;) {
size_t size = strlen(line);
if(size > 0)
nclistpush(vlist,strdup(line));
line += (size+1); /* skip terminating nul */
}
break;
}
free(values);
return THROW(NC_NOERR);
}
#endif
/* Define extra attributes not present in the xml */
int
NCD4_defineattr(NCD4meta* meta, NCD4node* parent, const char* aname, const char* typename, NCD4node** attrp)
{
NCD4node* attr = NULL;
NCD4node* basetype = NULL;
if((basetype = lookupAtomicType(meta->atomictypes,typename))==NULL)
return NC_EINVAL;
if(makeNode(NULL,parent,NULL,NCD4_ATTR,NC_NULL,&attr))
return NC_EINVAL;
SETNAME(attr,strdup(aname));
attr->basetype = basetype;
PUSH(parent->attributes,attr);
if(attrp) *attrp = attr;
return NC_NOERR;
}