netcdf-c/libdispatch/dhttp.c

706 lines
19 KiB
C
Raw Normal View History

Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
/**
* @file
*
* Read a range of data from a remote dataset.
*
* Copyright 2018 University Corporation for Atmospheric
* Research/Unidata. See COPYRIGHT file for more info.
*/
#include "config.h"
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#define CURL_DISABLE_TYPECHECK 1
#include <curl/curl.h>
#include "netcdf.h"
#include "nclog.h"
#include "ncbytes.h"
#include "nclist.h"
#include "ncuri.h"
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
#include "nchttp.h"
#include "ncauth.h"
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
#undef TRACE
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
#define CURLERR(e) reporterror(state,(e))
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
#if 0
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
static const char* LENGTH_ACCEPT[] = {"content-length","accept-ranges",NULL};
#endif
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
static const char* CONTENTLENGTH[] = {"content-length",NULL};
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
/* Forward */
static int setupconn(NC_HTTP_STATE* state, const char* objecturl);
static int execute(NC_HTTP_STATE* state);
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
static int headerson(NC_HTTP_STATE* state, const char** which);
static void headersoff(NC_HTTP_STATE* state);
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
static void showerrors(NC_HTTP_STATE* state);
static int reporterror(NC_HTTP_STATE* state, CURLcode cstat);
static int lookupheader(NC_HTTP_STATE* state, const char* key, const char** valuep);
static int my_trace(CURL *handle, curl_infotype type, char *data, size_t size,void *userp);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
#ifdef TRACE
static void
dbgflush() {
fflush(stderr);
fflush(stdout);
}
static void
Trace(const char* fcn)
{
fprintf(stdout,"xxx: %s\n",fcn);
dbgflush();
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
}
#else
#define dbgflush()
#define Trace(fcn)
#endif /*TRACE*/
/**************************************************/
/**
@param curlp curl handle stored here if non-NULL
*/
int
nc_http_init(NC_HTTP_STATE** statep)
{
return nc_http_init_verbose(statep,0);
}
int
nc_http_init_verbose(NC_HTTP_STATE** statep, int verbose)
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
{
int stat = NC_NOERR;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
NC_HTTP_STATE* state = NULL;
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
Trace("open");
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
if((state = calloc(1,sizeof(NC_HTTP_STATE))) == NULL)
{stat = NC_ENOMEM; goto done;}
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
/* initialize curl*/
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
state->curl = curl_easy_init();
if (state->curl == NULL) {stat = NC_ECURL; goto done;}
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
showerrors(state);
if(verbose) {
long onoff = 1;
CURLcode cstat = CURLE_OK;
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_VERBOSE, onoff));
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_DEBUGFUNCTION, my_trace));
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
}
stat = nc_http_reset(state);
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
if(statep) {*statep = state; state = NULL;}
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
done:
if(state) nc_http_close(state);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
dbgflush();
return stat;
}
int
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
nc_http_close(NC_HTTP_STATE* state)
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
{
int stat = NC_NOERR;
Trace("close");
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
if(state == NULL) return stat;
if(state->curl != NULL)
(void)curl_easy_cleanup(state->curl);
nclistfreeall(state->response.headset); state->response.headset = NULL;
nclistfreeall(state->response.headers); state->response.headers = NULL;
ncbytesfree(state->response.buf);
nclistfreeall(state->request.headers); state->request.headers = NULL;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
nullfree(state);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
dbgflush();
return stat;
}
/* Reset after a request */
int
nc_http_reset(NC_HTTP_STATE* state)
{
int stat = NC_NOERR;
CURLcode cstat = CURLE_OK;
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_HTTPGET, 1L));
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_NOBODY, 0L));
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_PUT, 0L));
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
cstat = curl_easy_setopt(state->curl, CURLOPT_CUSTOMREQUEST, NULL);
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
cstat = curl_easy_setopt(state->curl, CURLOPT_INFILESIZE_LARGE, (curl_off_t)-1);
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
state->request.method = HTTPGET;
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION, NULL));
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_WRITEDATA, NULL));
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_READFUNCTION, NULL));
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_READDATA, NULL));
headersoff(state);
done:
return stat;
}
/**************************************************/
/* Set misc parameters */
int
nc_http_set_method(NC_HTTP_STATE* state, HTTPMETHOD method)
{
int stat = NC_NOERR;
CURLcode cstat = CURLE_OK;
switch (method) {
case HTTPGET:
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_HTTPGET, 1L));
break;
case HTTPHEAD:
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_HTTPGET, 1L));
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_NOBODY, 1L));
break;
case HTTPPUT:
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_PUT, 1L));
break;
case HTTPDELETE:
cstat = curl_easy_setopt(state->curl, CURLOPT_CUSTOMREQUEST, "DELETE");
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_NOBODY, 1L));
break;
default: stat = NC_EINVAL; break;
}
if(cstat != CURLE_OK) {stat = NC_ECURL; goto done;}
state->request.method = method;
done:
return stat;
}
int
nc_http_set_payload(NC_HTTP_STATE* state, size_t size, void* payload)
{
int stat = NC_NOERR;
state->request.payloadsize = size;
state->request.payload = payload;
state->request.payloadpos = 0;
return stat;
}
int
nc_http_set_response(NC_HTTP_STATE* state, NCbytes* buf)
{
int stat = NC_NOERR;
state->response.buf = buf;
return stat;
}
/**************************************************/
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
/**
@param state state handle
@param objecturl to read
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
@param start starting offset
@param count number of bytes to read
@param buf store read data here -- caller must allocate and free
*/
int
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
nc_http_read(NC_HTTP_STATE* state, const char* objecturl, size64_t start, size64_t count, NCbytes* buf)
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
{
int stat = NC_NOERR;
char range[64];
CURLcode cstat = CURLE_OK;
Trace("read");
if(count == 0)
goto done; /* do not attempt to read */
if((stat = nc_http_set_response(state,buf))) goto fail;
if((stat = setupconn(state,objecturl)))
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
goto fail;
/* Set to read byte range */
snprintf(range,sizeof(range),"%ld-%ld",(long)start,(long)((start+count)-1));
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_RANGE, range));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if(cstat != CURLE_OK)
{stat = NC_ECURL; goto done;}
if((stat = execute(state)))
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
goto done;
done:
nc_http_reset(state);
state->response.buf = NULL;
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
dbgflush();
return stat;
fail:
stat = NC_ECURL;
goto done;
}
/**
@param state state handle
@param objecturl to write
@param payload send as body of a PUT
*/
int
nc_http_write(NC_HTTP_STATE* state, const char* objecturl, NCbytes* payload)
{
int stat = NC_NOERR;
Trace("write");
if((stat = nc_http_set_payload(state,ncbyteslength(payload),ncbytescontents(payload)))) goto fail;
if((stat = nc_http_set_method(state,HTTPPUT)));
if((stat = setupconn(state,objecturl))) goto fail;
if((stat = execute(state)))
goto done;
done:
nc_http_reset(state);
return stat;
fail:
stat = NC_ECURL;
goto done;
}
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
/**
Return length of an object.
Assume URL etc has already been set.
@param curl curl handle
*/
int
Enhance/Fix filter support re: Discussion https://github.com/Unidata/netcdf-c/discussions/2214 The primary change is to support so-called "standard filters". A standard filter is one that is defined by the following netcdf-c API: ```` int nc_def_var_XXX(int ncid, int varid, size_t nparams, unsigned* params); int nc_inq_var_XXXX(int ncid, int varid, int* usefilterp, unsigned* params); ```` So for example, zstandard would be a standard filter by defining the functions *nc_def_var_zstandard* and *nc_inq_var_zstandard*. In order to define these functions, we need a new dispatch function: ```` int nc_inq_filter_avail(int ncid, unsigned filterid); ```` This function, combined with the existing filter API can be used to implement arbitrary standard filters using a simple code pattern. Note that I would have preferred that this function return a list of all available filters, but HDF5 does not support that functionality. So this PR implements the dispatch function and implements the following standard functions: + bzip2 + zstandard + blosc Specific test cases are also provided for HDF5 and NCZarr. Over time, other specific standard filters will be defined. ## Primary Changes * Add nc_inq_filter_avail() to netcdf-c API. * Add standard filter implementations to test use of *nc_inq_filter_avail*. * Bump the dispatch table version number and add to all the relevant dispatch tables (libsrc, libsrcp, etc). * Create a program to invoke nc_inq_filter_avail so that it is accessible to shell scripts. * Cleanup szip support to properly support szip when HDF5 is disabled. This involves detecting libsz separately from testing if HDF5 supports szip. * Integrate shuffle and fletcher32 into the existing filter API. This means that, for example, nc_def_var_fletcher32 is now a wrapper around nc_def_var_filter. * Extend the Codec defaulting to allow multiple default shared libraries. ## Misc. Changes * Modify configure.ac/CMakeLists.txt to look for the relevant libraries implementing standard filters. * Modify libnetcdf.settings to list available standard filters (including deflate and szip). * Add CMake test modules to locate libbz2 and libzstd. * Cleanup the HDF5 memory manager function use in the plugins. * remove unused file include//ncfilter.h * remove tests for the HDF5 memory operations e.g. H5allocate_memory. * Add flag to ncdump to force use of _Filter instead of _Deflate or _Shuffle or _Fletcher32. Used for testing.
2022-03-15 02:39:37 +08:00
nc_http_size(NC_HTTP_STATE* state, const char* objecturl, long long* sizep)
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
{
int stat = NC_NOERR;
const char* hdr = NULL;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
Trace("size");
if(sizep == NULL)
goto done; /* do not attempt to read */
if((stat = nc_http_set_method(state,HTTPHEAD))) goto done;
if((stat = setupconn(state,objecturl)))
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
goto done;
/* Make sure we get headers */
if((stat = headerson(state,CONTENTLENGTH))) goto done;
state->httpcode = 200;
if((stat = execute(state)))
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
goto done;
if(nclistlength(state->response.headers) == 0)
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
{stat = NC_EURL; goto done;}
/* Get the content length header */
if((stat = lookupheader(state,"content-length",&hdr))==NC_NOERR) {
sscanf(hdr,"%llu",sizep);
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
}
done:
nc_http_reset(state);
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
headersoff(state);
dbgflush();
return stat;
}
int
nc_http_response_headset(NC_HTTP_STATE* state, const NClist* keys)
{
int i;
if(keys == NULL) return NC_NOERR;
if(state->response.headset == NULL)
state->response.headset = nclistnew();
for(i=0;i<nclistlength(keys);i++) {
const char* key = (const char*)nclistget(keys,i);
if(!nclistmatch(state->response.headset,key,0)) /* remove duplicates */
nclistpush(state->response.headset,strdup(key));
}
return NC_NOERR;
}
int
nc_http_response_headers(NC_HTTP_STATE* state, NClist** headersp)
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
{
NClist* headers = NULL;
if(headersp != NULL) {
headers = nclistclone(state->response.headers,1);
*headersp = headers; headers = NULL;
}
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
return NC_NOERR;
}
int
nc_http_request_setheaders(NC_HTTP_STATE* state, const NClist* headers)
{
nclistfreeall(state->request.headers);
state->request.headers = nclistclone(headers,1);
return NC_NOERR;
}
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
/**************************************************/
static size_t
ReadMemoryCallback(char* buffer, size_t size, size_t nmemb, void *data)
{
NC_HTTP_STATE* state = data;
size_t transfersize = size * nmemb;
size_t avail = (state->request.payloadsize - state->request.payloadpos);
Trace("ReadMemoryCallback");
if(transfersize == 0)
nclog(NCLOGWARN,"ReadMemoryCallback: zero sized buffer");
if(transfersize > avail) transfersize = avail;
memcpy(buffer,((char*)state->request.payload)+state->request.payloadpos,transfersize);
state->request.payloadpos += transfersize;
return transfersize;
}
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
static size_t
WriteMemoryCallback(void *ptr, size_t size, size_t nmemb, void *data)
{
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
NC_HTTP_STATE* state = data;
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
size_t realsize = size * nmemb;
Trace("WriteMemoryCallback");
if(realsize == 0)
nclog(NCLOGWARN,"WriteMemoryCallback: zero sized chunk");
ncbytesappendn(state->response.buf, ptr, realsize);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
return realsize;
}
static void
trim(char* s)
{
size_t l = strlen(s);
char* p = s;
char* q = s + l;
if(l == 0) return;
q--; /* point to last char of string */
/* Walk backward to first non-whitespace */
for(;q > p;q--) {
if(*q > ' ') break; /* found last non-whitespace */
}
/* invariant: p == q || *q > ' ' */
if(p == q) /* string is all whitespace */
{*p = '\0';}
else {/* *q is last non-whitespace */
q++; /* point to actual whitespace */
*q = '\0';
}
/* Ok, skip past leading whitespace */
for(p=s;*p;p++) {if(*p > ' ') break;}
/* invariant: *p == '\0' || *p > ' ' */
if(*p == 0) return; /* no leading whitespace */
/* Ok, overwrite any leading whitespace */
for(q=s;*p;) {*q++ = *p++;}
*q = '\0';
return;
}
static size_t
HeaderCallback(char *buffer, size_t size, size_t nitems, void *data)
{
size_t realsize = size * nitems;
char* name = NULL;
char* value = NULL;
char* p = NULL;
size_t i;
int havecolon;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
NC_HTTP_STATE* state = data;
int match;
const char* hdr;
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
Trace("HeaderCallback");
if(realsize == 0)
nclog(NCLOGWARN,"HeaderCallback: zero sized chunk");
i = 0;
/* Look for colon separator */
for(p=buffer;(i < realsize) && (*p != ':');p++,i++);
havecolon = (i < realsize);
if(i == 0)
nclog(NCLOGWARN,"HeaderCallback: malformed header: %s",buffer);
name = malloc(i+1);
memcpy(name,buffer,i);
name[i] = '\0';
if(state->response.headset != NULL) {
for(match=0,i=0;i<nclistlength(state->response.headset);i++) {
hdr = (const char*)nclistget(state->response.headset,i);
if(strcasecmp(hdr,name)==0) {match = 1; break;}
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
}
if(!match) goto done;
}
/* Capture this header */
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
value = NULL;
if(havecolon) {
size_t vlen = (realsize - i);
value = malloc(vlen+1);
p++; /* skip colon */
memcpy(value,p,vlen);
value[vlen] = '\0';
trim(value);
}
if(state->response.headers == NULL)
state->response.headers = nclistnew();
nclistpush(state->response.headers,name);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
name = NULL;
if(value == NULL) value = strdup("");
nclistpush(state->response.headers,value);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
value = NULL;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
done:
nullfree(name);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
return realsize;
}
static int
setupconn(NC_HTTP_STATE* state, const char* objecturl)
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
{
int stat = NC_NOERR;
CURLcode cstat = CURLE_OK;
if(objecturl != NULL) {
/* Set the URL */
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
#ifdef TRACE
fprintf(stderr,"curl.setup: url |%s|\n",objecturl);
#endif
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_URL, (void*)objecturl));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if (cstat != CURLE_OK) goto fail;
}
/* Set options */
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_TIMEOUT, 100)); /* 30sec timeout*/
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if (cstat != CURLE_OK) goto fail;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_CONNECTTIMEOUT, 100));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if (cstat != CURLE_OK) goto fail;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_NOPROGRESS, 1));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if (cstat != CURLE_OK) goto fail;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = curl_easy_setopt(state->curl, CURLOPT_FOLLOWLOCATION, 1);
if (cstat != CURLE_OK) goto fail;
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
/* Pull some values from .rc tables */
{
NCURI* uri = NULL;
char* hostport = NULL;
char* value = NULL;
ncuriparse(objecturl,&uri);
if(uri == NULL) goto fail;
hostport = NC_combinehostport(uri);
value = NC_rclookup("HTTP.SSL.CAINFO",hostport,NULL);
if(value == NULL)
value = NC_rclookup("HTTP.SSL.CAINFO",NULL,NULL);
if(value != NULL) {
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_CAINFO, value));
if (cstat != CURLE_OK) goto fail;
}
}
/* Set the method */
if((stat = nc_http_set_method(state,state->request.method))) goto done;
if(state->response.buf) {
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
/* send all data to this function */
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION, WriteMemoryCallback));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if (cstat != CURLE_OK) goto fail;
/* Set argument for WriteMemoryCallback */
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_WRITEDATA, (void*)state));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if (cstat != CURLE_OK) goto fail;
} else {/* turn off data capture */
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_WRITEFUNCTION, NULL));
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_WRITEDATA, NULL));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
}
if(state->request.payloadsize > 0) {
state->request.payloadpos = 0; /* track reading */
/* send all data to this function */
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_READFUNCTION, ReadMemoryCallback));
if (cstat != CURLE_OK) goto fail;
/* Set argument for ReadMemoryCallback */
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_READDATA, (void*)state));
if (cstat != CURLE_OK) goto fail;
} else {/* turn off data capture */
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_READFUNCTION, NULL));
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_READDATA, NULL));
}
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
/* Do method specific actions */
switch(state->request.method) {
case HTTPPUT:
if(state->request.payloadsize > 0)
cstat = curl_easy_setopt(state->curl, CURLOPT_INFILESIZE_LARGE, (curl_off_t)state->request.payloadsize);
break;
default: break;
}
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
done:
return stat;
fail:
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
/* Turn off header capture */
headersoff(state);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
stat = NC_ECURL;
goto done;
}
static int
execute(NC_HTTP_STATE* state)
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
{
int stat = NC_NOERR;
CURLcode cstat = CURLE_OK;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_perform(state->curl));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if(cstat != CURLE_OK) goto fail;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_getinfo(state->curl,CURLINFO_RESPONSE_CODE,&state->httpcode));
if(cstat != CURLE_OK) state->httpcode = 0;
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
done:
return stat;
fail:
stat = NC_ECURL;
goto done;
}
static int
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
headerson(NC_HTTP_STATE* state, const char** headset)
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
{
int stat = NC_NOERR;
CURLcode cstat = CURLE_OK;
const char** p;
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if(state->response.headers != NULL)
nclistfreeall(state->response.headers);
state->response.headers = nclistnew();
if(state->response.headset != NULL)
nclistfreeall(state->response.headset);
state->response.headset = nclistnew();
for(p=headset;*p;p++)
nclistpush(state->response.headset,strdup(*p));
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_HEADERFUNCTION, HeaderCallback));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if(cstat != CURLE_OK) goto fail;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
cstat = CURLERR(curl_easy_setopt(state->curl, CURLOPT_HEADERDATA, (void*)state));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
if (cstat != CURLE_OK) goto fail;
done:
return stat;
fail:
stat = NC_ECURL;
goto done;
}
static void
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
headersoff(NC_HTTP_STATE* state)
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
{
nclistfreeall(state->response.headers);
state->response.headers = NULL;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_HEADERFUNCTION, NULL));
(void)CURLERR(curl_easy_setopt(state->curl, CURLOPT_HEADERDATA, NULL));
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
}
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
static int
lookupheader(NC_HTTP_STATE* state, const char* key, const char** valuep)
{
int i;
const char* value = NULL;
/* Get the content length header */
for(i=0;i<nclistlength(state->response.headers);i+=2) {
char* s = nclistget(state->response.headers,i);
if(strcasecmp(s,key)==0) {
value = nclistget(state->response.headers,i+1);
break;
}
}
if(value == NULL) return NC_ENOOBJECT;
if(valuep)
*valuep = value;
return NC_NOERR;
}
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
static void
showerrors(NC_HTTP_STATE* state)
{
(void)curl_easy_setopt(state->curl, CURLOPT_ERRORBUFFER, state->errbuf);
}
static int
reporterror(NC_HTTP_STATE* state, CURLcode cstat)
{
if(cstat != CURLE_OK)
fprintf(stderr,"curlcode: (%d)%s : %s\n",
cstat,curl_easy_strerror(cstat),state->errbuf);
return cstat;
}
static
void dump(const char *text, FILE *stream, unsigned char *ptr, size_t size)
{
size_t i;
size_t c;
unsigned int width=0x10;
fprintf(stream, "%s, %10.10ld bytes (0x%8.8lx)\n",
text, (long)size, (long)size);
for(i=0; i<size; i+= width) {
fprintf(stream, "%4.4lx: ", (long)i);
/* show hex to the left */
for(c = 0; c < width; c++) {
if(i+c < size)
fprintf(stream, "%02x ", ptr[i+c]);
else
fputs(" ", stream);
}
/* show data on the right */
for(c = 0; (c < width) && (i+c < size); c++) {
char x = (ptr[i+c] >= 0x20 && ptr[i+c] < 0x80) ? ptr[i+c] : '.';
fputc(x, stream);
}
fputc('\n', stream); /* newline */
}
}
static int
my_trace(CURL *handle, curl_infotype type, char *data, size_t size,void *userp)
{
const char *text;
(void)handle; /* prevent compiler warning */
(void)userp;
switch (type) {
case CURLINFO_TEXT:
fprintf(stderr, "== Info: %s", data);
default: /* in case a new one is introduced to shock us */
return 0;
case CURLINFO_HEADER_OUT:
text = "=> Send header";
break;
case CURLINFO_DATA_OUT:
text = "=> Send data";
break;
case CURLINFO_SSL_DATA_OUT:
text = "=> Send SSL data";
break;
case CURLINFO_HEADER_IN:
text = "<= Recv header";
break;
case CURLINFO_DATA_IN:
text = "<= Recv data";
break;
case CURLINFO_SSL_DATA_IN:
text = "<= Recv SSL data";
break;
}
dump(text, stderr, (unsigned char *)data, size);
return 0;
}