netcdf-c/libhdf5/nc4info.c

692 lines
18 KiB
C
Raw Normal View History

2017-12-05 03:21:14 +08:00
/**
* @file
* @internal Add provenance info for netcdf-4 files.
*
* Copyright 2018, UCAR/Unidata See netcdf/COPYRIGHT file for copying
2017-12-05 03:21:14 +08:00
* and redistribution conditions.
* @author Dennis Heimbigner
*/
2018-07-16 18:50:15 +08:00
#include "config.h"
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#include "nc4internal.h"
#include "hdf5internal.h"
#include "nc_provenance.h"
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#include "nclist.h"
#include "ncbytes.h"
/* Provide a hack to suppress the writing of _NCProperties attribute.
This is for creating a file without _NCProperties for testing purposes.
*/
#undef SUPPRESSNCPROPS
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Various Constants */
#define NCPROPS_MAX_NAME 1024 /* max key name size */
#define NCPROPS_MAX_VALUE 1024 /* max value size */
2017-12-05 03:21:14 +08:00
#define HDF5_MAX_NAME 1024 /**< HDF5 max name. */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#define ESCAPECHARS "\\=|,"
2017-12-05 03:21:14 +08:00
/** @internal Check NetCDF return code. */
#define NCHECK(expr) {if((expr)!=NC_NOERR) {goto done;}}
2017-12-05 03:21:14 +08:00
/** @internal Check HDF5 return code. */
#define HCHECK(expr) {if((expr)<0) {ncstat = NC_EHDFERR; goto done;}}
static int NC4_read_ncproperties(NC_FILE_INFO_T* h5, char** propstring);
static int NC4_write_ncproperties(NC_FILE_INFO_T* h5);
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
static int globalpropinitialized = 0;
static NC4_Provenance globalprovenance;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
2017-12-05 03:21:14 +08:00
/**
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* @internal Initialize default provenance info
* This will only be used for newly created files
* or for opened files that do not contain an _NCProperties
* attribute.
2017-12-05 03:21:14 +08:00
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
int
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
NC4_provenance_init(void)
{
int stat = NC_NOERR;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
char* name = NULL;
char* value = NULL;
unsigned major,minor,release;
NCbytes* buffer = NULL; /* for constructing the global _NCProperties */
char printbuf[1024];
const char* p = NULL;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(globalpropinitialized)
return stat;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Build _NCProperties info */
/* Initialize globalpropinfo */
memset((void*)&globalprovenance,0,sizeof(NC4_Provenance));
globalprovenance.version = NCPROPS_VERSION;
buffer = ncbytesnew();
/* Insert version as first entry */
ncbytescat(buffer,NCPVERSION);
ncbytescat(buffer,"=");
snprintf(printbuf,sizeof(printbuf),"%d",globalprovenance.version);
ncbytescat(buffer,printbuf);
/* Insert the netcdf version */
ncbytesappend(buffer,NCPROPSSEP2);
ncbytescat(buffer,NCPNCLIB2);
ncbytescat(buffer,"=");
ncbytescat(buffer,PACKAGE_VERSION);
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Insert the HDF5 as underlying storage format library */
ncbytesappend(buffer,NCPROPSSEP2);
ncbytescat(buffer,NCPHDF5LIB2);
ncbytescat(buffer,"=");
if((stat = NC4_hdf5get_libversion(&major,&minor,&release))) goto done;
snprintf(printbuf,sizeof(printbuf),"%1u.%1u.%1u",major,minor,release);
ncbytescat(buffer,printbuf);
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#ifdef NCPROPERTIES_EXTRA
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Add any extra fields */
p = NCPROPERTIES_EXTRA;
if(p[0] == NCPROPSSEP2) p++; /* If leading separator */
ncbytesappend(buffer,NCPROPSSEP2);
ncbytescat(buffer,p);
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#endif
ncbytesnull(buffer);
globalprovenance.ncproperties = ncbytesextract(buffer);
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
done:
ncbytesfree(buffer);
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(name != NULL) free(name);
if(value != NULL) free(value);
if(stat == NC_NOERR)
globalpropinitialized = 1; /* avoid repeating it */
return stat;
}
/**
* @internal finalize default provenance info
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
int
NC4_provenance_finalize(void)
{
return NC4_clear_provenance(&globalprovenance);
}
2017-12-05 03:21:14 +08:00
/**
* @internal
*
* Construct the provenance information for a newly created file.
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* Note that creation of the _NCProperties attribute is deferred
* to the sync_netcdf4_file function.
*
* @param file Pointer to file object.
2017-12-05 03:21:14 +08:00
*
* @return ::NC_NOERR No error.
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* [Note: other errors are reported via LOG()]
2017-12-05 03:21:14 +08:00
* @author Dennis Heimbigner
*/
int
NC4_new_provenance(NC_FILE_INFO_T* file)
{
int ncstat = NC_NOERR;
NC4_Provenance* provenance = NULL;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int superblock = -1;
LOG((5, "%s: ncid 0x%x", __func__, file->root_grp->hdr.id));
assert(file->provenance.ncproperties == NULL); /* not yet defined */
provenance = &file->provenance;
memset(provenance,0,sizeof(NC4_Provenance)); /* make sure */
/* Set the version */
provenance->version = globalprovenance.version;
/* Set the superblock number */
if((ncstat = NC4_hdf5get_superblock(file,&superblock))) goto done;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
provenance->superblockversion = superblock;
if(globalprovenance.ncproperties != NULL) {
if((provenance->ncproperties = strdup(globalprovenance.ncproperties)) == NULL)
{ncstat = NC_ENOMEM; goto done;}
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
done:
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(ncstat) {
LOG((0,"Could not create _NCProperties attribute"));
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
return NC_NOERR;
}
/**
* @internal
*
* Construct the provenance information for an existing file.
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
*
* @param file Pointer to file object.
*
* @return ::NC_NOERR No error.
* [Note: other errors are reported via LOG()]
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* @author Dennis Heimbigner
*/
int
NC4_read_provenance(NC_FILE_INFO_T* file)
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
{
int ncstat = NC_NOERR;
NC4_Provenance* provenance = NULL;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int superblock = -1;
char* propstring = NULL;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
LOG((5, "%s: ncid 0x%x", __func__, file->root_grp->hdr.id));
assert(file->provenance.version == 0); /* not yet defined */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
provenance = &file->provenance;
memset(provenance,0,sizeof(NC4_Provenance)); /* make sure */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Set the superblock number */
if((ncstat = NC4_hdf5get_superblock(file,&superblock))) goto done;
provenance->superblockversion = superblock;
/* Read the _NCProperties value from the file */
if((ncstat = NC4_read_ncproperties(file,&propstring))) goto done;
provenance->ncproperties = propstring;
2019-04-19 00:53:16 +08:00
propstring = NULL;
done:
nullfree(propstring);
if(ncstat) {
LOG((0,"Could not create _NCProperties attribute"));
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
return NC_NOERR;
}
/**
* @internal
*
* Add the provenance information to a newly created file.
*
* @param file Pointer to file object.
*
* @return ::NC_NOERR No error.
* [Note: other errors are reported via LOG()]
* @author Dennis Heimbigner
*/
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int
NC4_write_provenance(NC_FILE_INFO_T* file)
{
int ncstat = NC_NOERR;
if((ncstat = NC4_write_ncproperties(file)))
goto done;
done:
return ncstat;
}
/* HDF5 Specific attribute read/write of _NCProperties */
static int
NC4_read_ncproperties(NC_FILE_INFO_T* h5, char** propstring)
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
{
int retval = NC_NOERR;
hid_t hdf5grpid = -1;
hid_t attid = -1;
hid_t aspace = -1;
hid_t atype = -1;
hid_t ntype = -1;
char* text = NULL;
H5T_class_t t_class;
hsize_t size;
LOG((5, "%s", __func__));
2018-11-13 04:06:15 +08:00
hdf5grpid = ((NC_HDF5_GRP_INFO_T *)(h5->root_grp->format_grp_info))->hdf_grpid;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(H5Aexists(hdf5grpid,NCPROPS) <= 0) { /* Does not exist */
/* File did not contain a _NCProperties attribute; leave empty */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
goto done;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* NCPROPS Attribute exists, make sure it is legitimate */
attid = H5Aopen_name(hdf5grpid, NCPROPS);
assert(attid > 0);
aspace = H5Aget_space(attid);
atype = H5Aget_type(attid);
/* Verify atype and size */
t_class = H5Tget_class(atype);
if(t_class != H5T_STRING)
{retval = NC_EINVAL; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
size = H5Tget_size(atype);
if(size == 0)
{retval = NC_EINVAL; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
text = (char*)malloc(1+(size_t)size);
if(text == NULL)
{retval = NC_ENOMEM; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if((ntype = H5Tget_native_type(atype, H5T_DIR_DEFAULT)) < 0)
{retval = NC_EHDFERR; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if((H5Aread(attid, ntype, text)) < 0)
{retval = NC_EHDFERR; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Make sure its null terminated */
text[(size_t)size] = '\0';
if(propstring) {*propstring = text; text = NULL;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
done:
if(text != NULL) free(text);
/* Close out the HDF5 objects */
if(attid > 0 && H5Aclose(attid) < 0) retval = NC_EHDFERR;
if(aspace > 0 && H5Sclose(aspace) < 0) retval = NC_EHDFERR;
if(atype > 0 && H5Tclose(atype) < 0) retval = NC_EHDFERR;
if(ntype > 0 && H5Tclose(ntype) < 0) retval = NC_EHDFERR;
/* For certain errors, actually fail, else log that attribute was invalid and ignore */
if(retval != NC_NOERR) {
if(retval != NC_ENOMEM && retval != NC_EHDFERR) {
LOG((0,"Invalid _NCProperties attribute: ignored"));
retval = NC_NOERR;
}
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
return retval;
}
2016-09-15 06:26:08 +08:00
static int
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
NC4_write_ncproperties(NC_FILE_INFO_T* h5)
{
#ifdef SUPPRESSNCPROPERTY
return NC_NOERR;
#else /*!SUPPRESSNCPROPERTY*/
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int retval = NC_NOERR;
hid_t hdf5grpid = -1;
hid_t attid = -1;
hid_t aspace = -1;
hid_t atype = -1;
size_t len = 0;
NC4_Provenance* prov = &h5->provenance;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
LOG((5, "%s", __func__));
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* If the file is read-only, return an error. */
if (h5->no_write)
{retval = NC_EPERM; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
2018-11-13 04:06:15 +08:00
hdf5grpid = ((NC_HDF5_GRP_INFO_T *)(h5->root_grp->format_grp_info))->hdf_grpid;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(H5Aexists(hdf5grpid,NCPROPS) > 0) /* Already exists, no overwrite */
goto done;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Build the property if we have legit value */
if(prov->ncproperties != NULL) {
/* Build the HDF5 string type */
if ((atype = H5Tcopy(H5T_C_S1)) < 0)
{retval = NC_EHDFERR; goto done;}
if (H5Tset_strpad(atype, H5T_STR_NULLTERM) < 0)
{retval = NC_EHDFERR; goto done;}
if(H5Tset_cset(atype, H5T_CSET_ASCII) < 0)
{retval = NC_EHDFERR; goto done;}
len = strlen(prov->ncproperties);
if(H5Tset_size(atype, len) < 0)
{retval = NC_EFILEMETA; goto done;}
/* Create NCPROPS attribute */
if((aspace = H5Screate(H5S_SCALAR)) < 0)
{retval = NC_EFILEMETA; goto done;}
if ((attid = H5Acreate(hdf5grpid, NCPROPS, atype, aspace, H5P_DEFAULT)) < 0)
{retval = NC_EFILEMETA; goto done;}
if (H5Awrite(attid, atype, prov->ncproperties) < 0)
{retval = NC_EFILEMETA; goto done;}
/* Verify */
#if 0
{
hid_t spacev, typev;
hsize_t dsize, tsize;
typev = H5Aget_type(attid);
spacev = H5Aget_space(attid);
dsize = H5Aget_storage_size(attid);
tsize = H5Tget_size(typev);
fprintf(stderr,"dsize=%lu tsize=%lu\n",(unsigned long)dsize,(unsigned long)tsize);
}
#endif
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
done:
/* Close out the HDF5 objects */
if(attid > 0 && H5Aclose(attid) < 0) retval = NC_EHDFERR;
if(aspace > 0 && H5Sclose(aspace) < 0) retval = NC_EHDFERR;
if(atype > 0 && H5Tclose(atype) < 0) retval = NC_EHDFERR;
/* For certain errors, actually fail, else log that attribute was invalid and ignore */
switch (retval) {
case NC_ENOMEM:
case NC_EHDFERR:
case NC_EPERM:
case NC_EFILEMETA:
case NC_NOERR:
break;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
default:
LOG((0,"Invalid _NCProperties attribute"));
retval = NC_NOERR;
break;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
}
return retval;
#endif /*!SUPPRESSNCPROPERTY*/
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/**************************************************/
/* Utilities */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Debugging */
void
ncprintprovenance(NC4_Provenance* info)
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
{
fprintf(stderr,"[%p] version=%d superblockversion=%d ncproperties=|%s|\n",
info,
info->version,
info->superblockversion,
(info->ncproperties==NULL?"":info->ncproperties));
}
/**
* @internal
*
* Clear the NCPROVENANCE object; do not free it
* @param prov Pointer to provenance object
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
int
NC4_clear_provenance(NC4_Provenance* prov)
{
LOG((5, "%s", __func__));
if(prov == NULL) return NC_NOERR;
nullfree(prov->ncproperties);
memset(prov,0,sizeof(NC4_Provenance));
return NC_NOERR;
}
#if 0
/* Unused functions */
/**
* @internal Parse file properties.
*
* @param text0 Text properties.
* @param pairs list of parsed (key,value) pairs
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
static int
properties_parse(const char* text0, NClist* pairs)
{
int ret = NC_NOERR;
char* p;
char* q;
char* text = NULL;
if(text0 == NULL || strlen(text0) == 0)
goto done;
text = strdup(text0);
if(text == NULL) return NC_ENOMEM;
/* For back compatibility with version 1, translate '|' -> ',' */
for(p=text;*p;p++) {
if(*p == NCPROPSSEP1)
*p = NCPROPSSEP2;
}
/* Walk and fill in ncinfo */
p = text;
while(*p) {
char* name = p;
char* value = NULL;
char* next = NULL;
/* Delimit whole (key,value) pair */
q = locate(p,NCPROPSSEP2);
if(*q != '\0') /* Never go beyond the final nul term */
*q++ = '\0';
next = q;
/* split key and value */
q = locate(p,'=');
name = p;
*q++ = '\0';
value = q;
/* Set up p for next iteration */
p = next;
nclistpush(pairs,strdup(name));
nclistpush(pairs,strdup(value));
}
done:
if(text) free(text);
return ret;
}
/* Locate a specific character and return its pointer
or EOS if not found
take \ escapes into account */
static char*
locate(char* p, char tag)
{
char* next;
int c;
assert(p != NULL);
for(next = p;(c = *next);next++) {
if(c == tag)
return next;
else if(c == '\\' && next[1] != '\0')
next++; /* skip escaped char */
}
return next; /* not found */
}
/* Utility to transfer a string to a buffer with escaping */
static void
escapify(NCbytes* buffer, const char* s)
{
const char* p;
for(p=s;*p;p++) {
if(strchr(ESCAPECHARS,*p) != NULL)
ncbytesappend(buffer,'\\');
ncbytesappend(buffer,*p);
}
}
/**
* @internal Build _NCProperties attribute value.
*
* Convert a NCPROPINFO instance to a single string.
* Will always convert to current format
*
* @param version
* @param list Properties list
* @param spropp Pointer that gets properties string.
* @return ::NC_NOERR No error.
* @return ::NC_EINVAL failed.
* @author Dennis Heimbigner
*/
static int
build_propstring(int version, NClist* list, char** spropp)
{
int stat = NC_NOERR;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int i;
NCbytes* buffer = NULL;
char sversion[64];
LOG((5, "%s version=%d", __func__, version));
if(spropp != NULL) *spropp = NULL;
if(version == 0 || version > NCPROPS_VERSION) /* unknown case */
goto done;
if(list == NULL)
{stat = NC_EINVAL; goto done;}
if((buffer = ncbytesnew()) == NULL)
{stat = NC_ENOMEM; goto done;}
/* start with version */
ncbytescat(buffer,NCPVERSION);
ncbytesappend(buffer,'=');
/* Use current version */
snprintf(sversion,sizeof(sversion),"%d",NCPROPS_VERSION);
ncbytescat(buffer,sversion);
for(i=0;i<nclistlength(list);i+=2) {
char* value, *name;
name = nclistget(list,i);
if(name == NULL) continue;
value = nclistget(list,i+1);
ncbytesappend(buffer,NCPROPSSEP2); /* terminate last entry */
escapify(buffer,name);
ncbytesappend(buffer,'=');
escapify(buffer,value);
}
/* Force null termination */
ncbytesnull(buffer);
if(spropp) *spropp = ncbytesextract(buffer);
done:
if(buffer != NULL) ncbytesfree(buffer);
return stat;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
}
static int
properties_getversion(const char* propstring, int* versionp)
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
{
int ncstat = NC_NOERR;
int version = 0;
/* propstring should begin with "version=dddd" */
if(propstring == NULL || strlen(propstring) < strlen("version=") + strlen("1"))
2019-04-19 00:53:16 +08:00
{ncstat = NC_EINVAL; goto done;} /* illegal version */
if(memcmp(propstring,"version=",strlen("version=")) != 0)
2019-04-19 00:53:16 +08:00
{ncstat = NC_EINVAL; goto done;} /* illegal version */
propstring += strlen("version=");
/* get version */
version = atoi(propstring);
if(version < 0)
2019-04-19 00:53:16 +08:00
{ncstat = NC_EINVAL; goto done;} /* illegal version */
if(versionp) *versionp = version;
done:
return ncstat;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
}
/**
* @internal
*
2019-04-19 00:53:16 +08:00
* Construct the parsed provenance information
*
* @param prov Pointer to provenance object
*
* @return ::NC_NOERR No error.
* @return ::NC_ENOMEM
* @return ::NC_EINVAL
* @author Dennis Heimbigner
*/
static int
parse_provenance(NC4_Provenance* prov)
{
int ncstat = NC_NOERR;
char *name = NULL;
char *value = NULL;
int version = 0;
NClist* list = NULL;
LOG((5, "%s: prov 0x%x", __func__, prov));
if(prov->ncproperty == NULL || strlen(prov->ncproperty) < strlen("version="))
{ncstat = NC_EINVAL; goto done;}
if((list = nclistnew()) == NULL)
{ncstat = NC_ENOMEM; goto done;}
/* Do we understand the version? */
if(prov->version > 0 && prov->version <= NCPROPS_VERSION) {/* recognized version */
if((ncstat=properties_parse(prov->ncproperty,list)))
goto done;
/* Remove version pair from properties list*/
if(nclistlength(list) < 2)
{ncstat = NC_EINVAL; goto done;} /* bad _NCProperties attribute */
/* Throw away the purported version=... */
nclistremove(list,0); /* version key */
nclistremove(list,0); /* version value */
/* Now, rebuild to the latest version */
switch (version) {
default: break; /* do nothing */
case 1: {
int i;
for(i=0;i<nclistlength(list);i+=2) {
char* newname = NULL;
name = nclistget(list,i);
if(name == NULL) continue; /* ignore */
if(strcmp(name,NCPNCLIB1) == 0)
newname = NCPNCLIB2; /* change name */
else if(strcmp(name,NCPHDF5LIB1) == 0)
newname = NCPHDF5LIB2;
else continue; /* ignore */
/* Do any rename */
nclistset(list,i,strdup(newname));
if(name) {free(name); name = NULL;}
}
} break;
} /*switch*/
}
prov->properties = list;
list = NULL;
done:
nclistfreeall(list);
if(name != NULL) free(name);
if(value != NULL) free(value);
return ncstat;
}
/**
* @internal
*
* Clear and Free the NC4_Provenance object
* @param prov Pointer to provenance object
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
static int
NC4_free_provenance(NC4_Provenance* prov)
{
LOG((5, "%s", __func__));
if(prov == NULL) return NC_NOERR;
NC4_clear_provenance(prov);
free(prov);
return NC_NOERR;
}
/* Utility to copy contents of the dfalt into an NCPROPINFO object */
static int
propinfo_default(NC4_Properties* dst, const NC4_Properties* dfalt)
{
int i;
if(dst->properties == NULL) {
dst->properties = nclistnew();
if(dst->properties == NULL) return NC_ENOMEM;
}
dst->version = dfalt->version;
for(i=0;i<nclistlength(dfalt->properties);i++) {
char* s = nclistget(dfalt->properties,i);
s = strdup(s);
if(s == NULL) return NC_ENOMEM;
nclistpush(dst->properties,s);
}
return NC_NOERR;
}
#endif /*0*/