netcdf-c/libdispatch/drc.c

1207 lines
31 KiB
C
Raw Normal View History

2017-08-31 02:05:04 +08:00
/*
Copyright (c) 1998-2018 University Corporation for Atmospheric Research/Unidata
See COPYRIGHT for license information.
2017-08-31 02:05:04 +08:00
*/
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#include "config.h"
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_STDARG_H
#include <stdarg.h>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <assert.h>
#include "netcdf.h"
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#include "ncbytes.h"
#include "ncuri.h"
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#include "ncrc.h"
#include "nclog.h"
#include "ncauth.h"
#include "ncpathmgr.h"
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
#include "nc4internal.h"
#include "ncdispatch.h"
#ifndef nulldup
#define nulldup(x) ((x)?strdup(x):(x))
#endif
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
#undef NOREAD
#undef DRCDEBUG
#undef LEXDEBUG
#undef PARSEDEBUG
#undef AWSDEBUG
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#define RTAG ']'
#define LTAG '['
#undef MEMCHECK
#define MEMCHECK(x) if((x)==NULL) {goto nomem;} else {}
/* Alternate .aws directory location */
#define NC_TEST_AWS_DIR "NC_TEST_AWS_DIR"
/* Forward */
static int NC_rcload(void);
static char* rcreadline(char** nextlinep);
static void rctrim(char* text);
static void rcorder(NClist* rc);
static int rccompile(const char* path);
static int rcequal(NCRCentry* e1, NCRCentry* e2);
static int rclocatepos(const char* key, const char* hostport, const char* urlpath);
static struct NCRCentry* rclocate(const char* key, const char* hostport, const char* urlpath);
static int rcsearch(const char* prefix, const char* rcname, char** pathp);
static void rcfreeentries(NClist* rc);
static void rcfreeentry(NCRCentry* t);
#ifdef DRCDEBUG
static void storedump(char* msg, NClist* entrys);
#endif
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
static int aws_load_credentials(NCglobalstate*);
static void freeprofile(struct AWSprofile* profile);
static void freeprofilelist(NClist* profiles);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* Define default rc files and aliases, also defines load order*/
static const char* rcfilenames[] = {".ncrc", ".daprc", ".dodsrc",NULL};
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Read these files */
static const char* awsconfigfiles[] = {".aws/credentials",".aws/config",NULL};
static int NCRCinitialized = 0;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/**************************************************/
/* User API */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/**
The most common case is to get the most general value for a key,
where most general means that the urlpath and hostport are null
So this function returns the value associated with the key
where the .rc entry has the simple form "key=value".
If that entry is not found, then return NULL.
@param key table entry key field
@return value matching the key -- caller frees
@return NULL if no entry of the form key=value exists
*/
char*
nc_rc_get(const char* key)
{
NCglobalstate* ncg = NULL;
char* value = NULL;
if(!NC_initialized) nc_initialize();
ncg = NC_getglobalstate();
assert(ncg != NULL && ncg->rcinfo != NULL && ncg->rcinfo->entries != NULL);
if(ncg->rcinfo->ignore) return NC_NOERR;
value = NC_rclookup(key,NULL,NULL);
return nulldup(value);
}
/**
Set simple key=value in .rc table.
Will overwrite any existing value.
@param key
@param value
@return NC_NOERR if success
@return NC_EINVAL if fail
*/
int
nc_rc_set(const char* key, const char* value)
{
int stat = NC_NOERR;
NCglobalstate* ncg = NULL;
if(!NC_initialized) nc_initialize();
ncg = NC_getglobalstate();
assert(ncg != NULL && ncg->rcinfo != NULL && ncg->rcinfo->entries != NULL);
if(ncg->rcinfo->ignore) return NC_NOERR;
stat = NC_rcfile_insert(key,NULL,NULL,value);
return stat;
}
/**************************************************/
/* External Entry Points */
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/*
Initialize defaults and load:
* .ncrc
* .daprc
* .dodsrc
* ${HOME}/.aws/config
* ${HOME}/.aws/credentials
For debugging support, it is possible
to change where the code looks for the .aws directory.
This is set by the environment variable NC_TEST_AWS_DIR.
*/
void
ncrc_initialize(void)
{
int stat = NC_NOERR;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* ncg = NULL;
if(NCRCinitialized) return;
NCRCinitialized = 1; /* prevent recursion */
ncg = NC_getglobalstate();
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
#ifndef NOREAD
/* Load entrys */
if((stat = NC_rcload())) {
nclog(NCLOGWARN,".rc loading failed");
}
/* Load .aws/config */
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
if((stat = aws_load_credentials(ncg))) {
nclog(NCLOGWARN,"AWS config file not loaded");
}
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
#endif
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
}
static void
ncrc_setrchome(void)
{
const char* tmp = NULL;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* ncg = NC_getglobalstate();
assert(ncg && ncg->home);
if(ncg->rcinfo->rchome) return;
tmp = getenv(NCRCENVHOME);
if(tmp == NULL || strlen(tmp) == 0)
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
tmp = ncg->home;
ncg->rcinfo->rchome = strdup(tmp);
#ifdef DRCDEBUG
fprintf(stderr,"ncrc_setrchome: %s\n",ncg->rcinfo->rchome);
#endif
}
void
NC_rcclear(NCRCinfo* info)
{
if(info == NULL) return;
nullfree(info->rcfile);
nullfree(info->rchome);
rcfreeentries(info->entries);
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
freeprofilelist(info->s3profiles);
}
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
static void
rcfreeentry(NCRCentry* t)
{
nullfree(t->host);
nullfree(t->urlpath);
nullfree(t->key);
nullfree(t->value);
free(t);
}
static void
rcfreeentries(NClist* rc)
{
int i;
for(i=0;i<nclistlength(rc);i++) {
NCRCentry* t = (NCRCentry*)nclistget(rc,i);
rcfreeentry(t);
}
nclistfree(rc);
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* locate, read and compile the rc files, if any */
static int
NC_rcload(void)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
int i,ret = NC_NOERR;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
char* path = NULL;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* globalstate = NULL;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
NClist* rcfileorder = nclistnew();
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
if(!NCRCinitialized) ncrc_initialize();
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
globalstate = NC_getglobalstate();
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
if(globalstate->rcinfo->ignore) {
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
nclog(NCLOGDBG,".rc file loading suppressed");
goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
if(globalstate->rcinfo->loaded) goto done;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* locate the configuration files in order of use:
1. Specified by NCRCENV_RC environment variable.
2. If NCRCENV_RC is not set then merge the set of rc files in this order:
1. $RCHOME/.ncrc
2. $RCHOME/.daprc
3. $RCHOME/.docsrc
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
4. $CWD/.ncrc
5. $CWD/.daprc
6. $CWD/.docsrc
Entry in later files override any of the earlier files
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
*/
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
if(globalstate->rcinfo->rcfile != NULL) { /* always use this */
nclistpush(rcfileorder,strdup(globalstate->rcinfo->rcfile));
} else {
const char** rcname;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
const char* dirnames[3];
const char** dir;
/* Make sure rcinfo.rchome is defined */
ncrc_setrchome();
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
dirnames[0] = globalstate->rcinfo->rchome;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
dirnames[1] = globalstate->cwd;
dirnames[2] = NULL;
for(dir=dirnames;*dir;dir++) {
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
for(rcname=rcfilenames;*rcname;rcname++) {
ret = rcsearch(*dir,*rcname,&path);
if(ret == NC_NOERR && path != NULL)
nclistpush(rcfileorder,path);
path = NULL;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
}
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
for(i=0;i<nclistlength(rcfileorder);i++) {
path = (char*)nclistget(rcfileorder,i);
if((ret=rccompile(path))) {
nclog(NCLOGWARN, "Error parsing %s\n",path);
ret = NC_NOERR; /* ignore it */
goto done;
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
globalstate->rcinfo->loaded = 1; /* even if not exists */
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
nclistfreeall(rcfileorder);
return (ret);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
/**
* Locate a entry by property key and host+port (may be null)
* If duplicate keys, first takes precedence.
*/
char*
NC_rclookup(const char* key, const char* hostport, const char* urlpath)
{
struct NCRCentry* entry = NULL;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
if(!NCRCinitialized) ncrc_initialize();
entry = rclocate(key,hostport,urlpath);
return (entry == NULL ? NULL : entry->value);
}
/**
* Locate a entry by property key and uri.
* If duplicate keys, first takes precedence.
*/
char*
NC_rclookupx(NCURI* uri, const char* key)
{
char* hostport = NULL;
char* result = NULL;
hostport = NC_combinehostport(uri);
result = NC_rclookup(key,hostport,uri->path);
nullfree(hostport);
return result;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
#if 0
/*!
Set the absolute path to use for the rc file.
WARNING: this MUST be called before any other
call in order for this to take effect.
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
\param[in] rcfile The path to use. If NULL then do not use any rcfile.
\retval OC_NOERR if the request succeeded.
\retval OC_ERCFILE if the file failed to load
*/
int
NC_set_rcfile(const char* rcfile)
{
int stat = NC_NOERR;
FILE* f = NULL;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* globalstate = NC_getglobalstate();
if(rcfile != NULL && strlen(rcfile) == 0)
rcfile = NULL;
f = NCfopen(rcfile,"r");
if(f == NULL) {
stat = NC_ERCFILE;
goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
fclose(f);
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
nullfree(globalstate->rcinfo->rcfile);
globalstate->rcinfo->rcfile = strdup(rcfile);
/* Clear globalstate->rcinfo */
NC_rcclear(&globalstate->rcinfo);
/* (re) load the rcfile and esp the entriestore*/
stat = NC_rcload();
done:
return stat;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/**************************************************/
/* RC processing functions */
static char*
rcreadline(char** nextlinep)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
char* line;
char* p;
line = (p = *nextlinep);
if(*p == '\0') return NULL; /*signal done*/
for(;*p;p++) {
if(*p == '\r' && p[1] == '\n') *p = '\0';
else if(*p == '\n') break;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
*p++ = '\0'; /* null terminate line; overwrite newline */
*nextlinep = p;
return line;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
/* Trim TRIMCHARS from both ends of text; */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static void
rctrim(char* text)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
char* p;
char* q;
size_t len = 0;
int i;
if(text == NULL || *text == '\0') return;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
len = strlen(text);
/* elide upto first non-trimchar */
for(q=text,p=text;*p;p++) {
if(*p != ' ' && *p != '\t' && *p != '\r') {*q++ = *p;}
}
len = strlen(p);
/* locate last non-trimchar */
if(len > 0) {
for(i=(len-1);i>=0;i--) {
p = &text[i];
if(*p != ' ' && *p != '\t' && *p != '\r') {break;}
*p = '\0'; /* elide trailing trimchars */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
}
}
/* Order the entries: those with urls must be first,
but otherwise relative order does not matter.
*/
static void
rcorder(NClist* rc)
{
2017-11-09 21:24:18 +08:00
int i;
int len = nclistlength(rc);
2018-05-19 10:28:51 +08:00
NClist* tmprc = NULL;
if(rc == NULL || len == 0) return;
2018-05-19 10:28:51 +08:00
tmprc = nclistnew();
/* Two passes: 1) pull entries with host */
for(i=0;i<len;i++) {
NCRCentry* ti = nclistget(rc,i);
if(ti->host == NULL) continue;
nclistpush(tmprc,ti);
}
/* pass 2 pull entries without host*/
for(i=0;i<len;i++) {
NCRCentry* ti = nclistget(rc,i);
if(ti->host != NULL) continue;
nclistpush(tmprc,ti);
}
/* Move tmp to rc */
nclistsetlength(rc,0);
for(i=0;i<len;i++) {
NCRCentry* ti = nclistget(tmprc,i);
nclistpush(rc,ti);
}
#ifdef DRCDEBUG
storedump("reorder:",rc);
#endif
nclistfree(tmprc);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
/* Merge a entry store from a file*/
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int
rccompile(const char* filepath)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
NClist* rc = NULL;
char* contents = NULL;
NCbytes* tmp = ncbytesnew();
NCURI* uri = NULL;
char* nextline = NULL;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* globalstate = NC_getglobalstate();
char* bucket = NULL;
if((ret=NC_readfile(filepath,tmp))) {
nclog(NCLOGWARN, "Could not open configuration file: %s",filepath);
goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
contents = ncbytesextract(tmp);
if(contents == NULL) contents = strdup("");
/* Either reuse or create new */
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
rc = globalstate->rcinfo->entries;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
if(rc == NULL) {
rc = nclistnew();
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
globalstate->rcinfo->entries = rc;
}
nextline = contents;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
for(;;) {
char* line;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
char* key = NULL;
char* value = NULL;
char* host = NULL;
char* urlpath = NULL;
size_t llen;
NCRCentry* entry;
line = rcreadline(&nextline);
if(line == NULL) break; /* done */
rctrim(line); /* trim leading and trailing blanks */
if(line[0] == '#') continue; /* comment */
if((llen=strlen(line)) == 0) continue; /* empty line */
if(line[0] == LTAG) {
char* url = ++line;
char* rtag = strchr(line,RTAG);
if(rtag == NULL) {
nclog(NCLOGERR, "Malformed [url] in %s entry: %s",filepath,line);
continue;
}
line = rtag + 1;
*rtag = '\0';
/* compile the url and pull out the host and protocol */
if(uri) ncurifree(uri);
if(ncuriparse(url,&uri)) {
nclog(NCLOGERR, "Malformed [url] in %s entry: %s",filepath,line);
continue;
}
{ NCURI* newuri = NULL;
/* Rebuild the url to S3 "path" format */
nullfree(bucket);
if((ret = NC_s3urlrebuild(uri,&newuri,&bucket,NULL))) goto done;
ncurifree(uri);
uri = newuri;
newuri = NULL;
}
/* Get the host+port */
ncbytesclear(tmp);
ncbytescat(tmp,uri->host);
if(uri->port != NULL) {
ncbytesappend(tmp,':');
ncbytescat(tmp,uri->port);
}
ncbytesnull(tmp);
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
host = ncbytesextract(tmp);
if(strlen(host)==0) /* nullify host */
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
{free(host); host = NULL;}
/* Get the url path part */
urlpath = uri->path;
if(urlpath && strlen(urlpath)==0) urlpath = NULL; /* nullify */
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* split off key and value */
key=line;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
value = strchr(line, '=');
if(value == NULL)
value = line + strlen(line);
else {
*value = '\0';
value++;
}
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* See if key already exists */
entry = rclocate(key,host,urlpath);
if(entry == NULL) {
entry = (NCRCentry*)calloc(1,sizeof(NCRCentry));
if(entry == NULL) {ret = NC_ENOMEM; goto done;}
nclistpush(rc,entry);
entry->host = host; host = NULL;
entry->urlpath = nulldup(urlpath);
entry->key = nulldup(key);
rctrim(entry->host);
rctrim(entry->urlpath);
rctrim(entry->key);
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
}
nullfree(entry->value);
entry->value = nulldup(value);
rctrim(entry->value);
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
#ifdef DRCDEBUG
fprintf(stderr,"rc: host=%s urlpath=%s key=%s value=%s\n",
(entry->host != NULL ? entry->host : "<null>"),
(entry->urlpath != NULL ? entry->urlpath : "<null>"),
entry->key,entry->value);
#endif
entry = NULL;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
#ifdef DRCDEBUG
fprintf(stderr,"reorder.path=%s\n",filepath);
#endif
rcorder(rc);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
if(contents) free(contents);
ncurifree(uri);
ncbytesfree(tmp);
return (ret);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
/**
Encapsulate equality comparison: return 1|0
*/
static int
rcequal(NCRCentry* e1, NCRCentry* e2)
{
int nulltest;
if(e1->key == NULL || e2->key == NULL) return 0;
if(strcmp(e1->key,e2->key) != 0) return 0;
/* test hostport; take NULL into account*/
nulltest = 0;
if(e1->host == NULL) nulltest |= 1;
if(e2->host == NULL) nulltest |= 2;
switch (nulltest) {
case 0: if(strcmp(e1->host,e2->host) != 0) {return 0;} break;
case 1: return 0;
case 2: return 0;
case 3: break;
default: return 0;
}
/* test urlpath take NULL into account*/
nulltest = 0;
if(e1->urlpath == NULL) nulltest |= 1;
if(e2->urlpath == NULL) nulltest |= 2;
switch (nulltest) {
case 0: if(strcmp(e1->urlpath,e2->urlpath) != 0) {return 0;} break;
case 1: return 0;
case 2: return 0;
case 3: break;
default: return 0;
}
return 1;
}
/**
* (Internal) Locate a entry by property key and host+port (may be null) and urlpath (may be null)
* If duplicate keys, first takes precedence.
*/
static int
rclocatepos(const char* key, const char* hostport, const char* urlpath)
{
int i;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* globalstate = NC_getglobalstate();
struct NCRCinfo* info = globalstate->rcinfo;
NCRCentry* entry = NULL;
NCRCentry candidate;
NClist* rc = info->entries;
if(info->ignore) return -1;
candidate.key = (char*)key;
candidate.value = (char*)NULL;
candidate.host = (char*)hostport;
candidate.urlpath = (char*)urlpath;
for(i=0;i<nclistlength(rc);i++) {
entry = (NCRCentry*)nclistget(rc,i);
if(rcequal(entry,&candidate)) return i;
}
return -1;
}
/**
* (Internal) Locate a entry by property key and host+port (may be null or "").
* If duplicate keys, first takes precedence.
*/
static struct NCRCentry*
rclocate(const char* key, const char* hostport, const char* urlpath)
{
int pos;
NCglobalstate* globalstate = NC_getglobalstate();
struct NCRCinfo* info = globalstate->rcinfo;
if(globalstate->rcinfo->ignore) return NULL;
if(key == NULL || info == NULL) return NULL;
pos = rclocatepos(key,hostport,urlpath);
if(pos < 0) return NULL;
return NC_rcfile_ith(info,(size_t)pos);
}
/**
* Locate rc file by searching in directory prefix.
*/
static
int
rcsearch(const char* prefix, const char* rcname, char** pathp)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
char* path = NULL;
FILE* f = NULL;
size_t plen = (prefix?strlen(prefix):0);
2019-01-12 02:41:09 +08:00
size_t rclen = strlen(rcname);
int ret = NC_NOERR;
size_t pathlen = plen+rclen+1+1; /*+1 for '/' +1 for nul */
path = (char*)malloc(pathlen); /* +1 for nul*/
if(path == NULL) {ret = NC_ENOMEM; goto done;}
snprintf(path, pathlen, "%s/%s", prefix, rcname);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* see if file is readable */
Codify cross-platform file paths The netcdf-c code has to deal with a variety of platforms: Windows, OSX, Linux, Cygwin, MSYS, etc. These platforms differ significantly in the kind of file paths that they accept. So in order to handle this, I have created a set of replacements for the most common file system operations such as _open_ or _fopen_ or _access_ to manage the file path differences correctly. A more limited version of this idea was already implemented via the ncwinpath.h and dwinpath.c code. So this can be viewed as a replacement for that code. And in path in many cases, the only change that was required was to replace '#include <ncwinpath.h>' with '#include <ncpathmgt.h>' and then replace file operation calls with the NCxxx equivalent from ncpathmgr.h Note that recently, the ncwinpath.h was renamed ncpathmgmt.h, so this pull request should not require dealing with winpath. The heart of the change is include/ncpathmgmt.h, which provides alternate operations such as NCfopen or NCaccess and which properly parse and rebuild path arguments to work for the platform on which the code is executing. This mostly matters for Windows because of the way that it uses backslash and drive letters, as compared to *nix*. One important feature is that the user can do string manipulations on a file path without having to worry too much about the platform because the path management code will properly handle most mixed cases. So one can for example concatenate a path suffix that uses forward slashes to a Windows path and have it work correctly. The conversion code is in libdispatch/dpathmgr.c, and the important function there is NCpathcvt which does the proper conversions to the local path format. As a rule, most code should just replace their file operations with the corresponding NCxxx ones defined in include/ncpathmgmt.h. These NCxxx functions all call NCpathcvt on their path arguments before executing the actual file operation. In some rare cases, the client may need to directly use NCpathcvt, but this should be avoided as much as possible. If there is a need for supporting a new file operation not already in ncpathmgmt.h, then use the code in dpathmgr.c as a template. Also please notify Unidata so we can include it as a formal part or our supported operations. Also, if you see an operation in the library that is not using the NCxxx form, then please submit an issue so we can fix it. Misc. Changes: * Clean up the utf8 testing code; it is impossible to get some tests to work under windows using shell scripts; the args do not pass as utf8 but as some other encoding. * Added an extra utf8 test case: test_unicode_path.sh * Add a true test for HDF5 1.10.6 or later because as noted in PR https://github.com/Unidata/netcdf-c/pull/1794, HDF5 changed its Windows file path handling.
2021-03-05 04:41:31 +08:00
f = NCfopen(path,"r");
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(f != NULL)
nclog(NCLOGDBG, "Found rc file=%s",path);
done:
if(f == NULL || ret != NC_NOERR) {
nullfree(path);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
path = NULL;
}
if(f != NULL)
fclose(f);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(pathp != NULL)
*pathp = path;
else {
nullfree(path);
path = NULL;
}
Add filter support to NCZarr Filter support has three goals: 1. Use the existing HDF5 filter implementations, 2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr, 3. Allow filters to be used even when HDF5 is disabled Detailed usage directions are define in docs/filters.md. For now, the existing filter API is left in place. So filters are defined using ''nc_def_var_filter'' using the HDF5 style where the id and parameters are unsigned integers. This is a big change since filters affect many parts of the code. In the following, the terms "compressor" and "filter" and "codec" are generally used synonomously. ### Filter-Related Changes: * In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms. * Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h. * Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out. * Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h. * Add a number of new test to test the new nczarr filters. * Let ncgen parse _Codecs attribute, although it is ignored. ### Plugin directory changes: * Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file * Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip * Add a Codec defaulter (see docs/filters.md) for the big four filters. * Make plugins work with windows by properly adding __declspec declaration. ### Misc. Non-Filter Changes * Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5. * Improve support for caching * More fixes for path conversion code * Fix misc. memory leaks * Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath. * Add a number of new test to test the non-filter fixes. * Update the parsers * Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32'
2021-09-03 07:04:26 +08:00
errno = 0; /* silently ignore errors */
return (ret);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
int
NC_rcfile_insert(const char* key, const char* hostport, const char* urlpath, const char* value)
{
int ret = NC_NOERR;
/* See if this key already defined */
struct NCRCentry* entry = NULL;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* globalstate = NULL;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
NClist* rc = NULL;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
if(!NCRCinitialized) ncrc_initialize();
if(key == NULL || value == NULL)
{ret = NC_EINVAL; goto done;}
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
globalstate = NC_getglobalstate();
rc = globalstate->rcinfo->entries;
if(rc == NULL) {
rc = nclistnew();
globalstate->rcinfo->entries = rc;
if(rc == NULL) {ret = NC_ENOMEM; goto done;}
}
entry = rclocate(key,hostport,urlpath);
if(entry == NULL) {
entry = (NCRCentry*)calloc(1,sizeof(NCRCentry));
if(entry == NULL) {ret = NC_ENOMEM; goto done;}
entry->key = strdup(key);
entry->value = NULL;
rctrim(entry->key);
entry->host = nulldup(hostport);
rctrim(entry->host);
entry->urlpath = nulldup(urlpath);
rctrim(entry->urlpath);
nclistpush(rc,entry);
}
if(entry->value != NULL) free(entry->value);
entry->value = strdup(value);
rctrim(entry->value);
#ifdef DRCDEBUG
storedump("NC_rcfile_insert",rc);
#endif
done:
return ret;
}
/* Obtain the count of number of entries */
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
size_t
NC_rcfile_length(NCRCinfo* info)
{
return nclistlength(info->entries);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
}
/* Obtain the ith entry; return NULL if out of range */
NCRCentry*
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
NC_rcfile_ith(NCRCinfo* info, size_t i)
{
if(i >= nclistlength(info->entries))
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
return NULL;
return (NCRCentry*)nclistget(info->entries,i);
Provide byte-range reading of remote datasets re: issue https://github.com/Unidata/netcdf-c/issues/1251 Assume that you have the URL to a remote dataset which is a normal netcdf-3 or netcdf-4 file. This PR allows the netcdf-c to read that dataset's contents as a netcdf file using HTTP byte ranges if the remote server supports byte-range access. Originally, this PR was set up to access Amazon S3 objects, but it can also access other remote datasets such as those provided by a Thredds server via the HTTPServer access protocol. It may also work for other kinds of servers. Note that this is not intended as a true production capability because, as is known, this kind of access to can be quite slow. In addition, the byte-range IO drivers do not currently do any sort of optimization or caching. An additional goal here is to gain some experience with the Amazon S3 REST protocol. This architecture and its use documented in the file docs/byterange.dox. There are currently two test cases: 1. nc_test/tst_s3raw.c - this does a simple open, check format, close cycle for a remote netcdf-3 file and a remote netcdf-4 file. 2. nc_test/test_s3raw.sh - this uses ncdump to investigate some remote datasets. This PR also incorporates significantly changed model inference code (see the superceded PR https://github.com/Unidata/netcdf-c/pull/1259). 1. It centralizes the code that infers the dispatcher. 2. It adds support for byte-range URLs Other changes: 1. NC_HDF5_finalize was not being properly called by nc_finalize(). 2. Fix minor bug in ncgen3.l 3. fix memory leak in nc4info.c 4. add code to walk the .daprc triples and to replace protocol= fragment tag with a more general mode= tag. Final Note: Th inference code is still way too complicated. We need to move to the validfile() model used by netcdf Java, where each dispatcher is asked if it can process the file. This decentralizes the inference code. This will be done after all the major new dispatchers (PIO, Zarr, etc) have been implemented.
2019-01-02 09:27:36 +08:00
}
#ifdef DRCDEBUG
static void
storedump(char* msg, NClist* entries)
{
int i;
if(msg != NULL) fprintf(stderr,"%s\n",msg);
if(entries == NULL || nclistlength(entries)==0) {
fprintf(stderr,"<EMPTY>\n");
return;
}
for(i=0;i<nclistlength(entries);i++) {
NCRCentry* t = (NCRCentry*)nclistget(entries,i);
fprintf(stderr,"\t%s\t%s\t%s\n",
((t->host == NULL || strlen(t->host)==0)?"--":t->host),t->key,t->value);
}
fflush(stderr);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
#endif
/**************************************************/
/*
Get the current active profile. The priority order is as follows:
1. aws.profile key in mode flags
2. aws.profile in .rc entries
4. "default"
@param uri uri with mode flags, may be NULL
@param profilep return profile name here or NULL if none found
@return NC_NOERR if no error.
@return NC_EINVAL if something else went wrong.
*/
int
NC_getactives3profile(NCURI* uri, const char** profilep)
{
int stat = NC_NOERR;
const char* profile = NULL;
profile = ncurifragmentlookup(uri,"aws.profile");
if(profile == NULL)
profile = NC_rclookupx(uri,"AWS.PROFILE");
if(profile == NULL)
profile = "default";
#ifdef AWSDEBUG
fprintf(stderr,">>> activeprofile = %s\n",(profile?profile:"null"));
#endif
if(profilep) *profilep = profile;
return stat;
}
/*
Get the current default region. The search order is as follows:
1. aws.region key in mode flags
2. aws.region in .rc entries
3. aws_region key in current profile (only if profiles are being used)
4. "us-east-1"
@param uri uri with mode flags, may be NULL
@param regionp return region name here or NULL if none found
@return NC_NOERR if no error.
@return NC_EINVAL if something else went wrong.
*/
int
NC_getdefaults3region(NCURI* uri, const char** regionp)
{
int stat = NC_NOERR;
const char* region = NULL;
const char* profile = NULL;
region = ncurifragmentlookup(uri,"aws.region");
if(region == NULL)
region = NC_rclookupx(uri,"AWS.REGION");
if(region == NULL) {/* See if we can find a profile */
if((stat = NC_getactives3profile(uri,&profile))==NC_NOERR) {
if(profile)
(void)NC_s3profilelookup(profile,"aws_region",&region);
}
}
if(region == NULL)
region = "us-east-1";
#ifdef AWSDEBUG
fprintf(stderr,">>> activeregion = %s\n",(region?region:"null"));
#endif
if(regionp) *regionp = region;
return stat;
}
/**
The .aws/config and .aws/credentials files
are in INI format (https://en.wikipedia.org/wiki/INI_file).
This format is not well defined, so the grammar used
here is restrictive. Here, the term "profile" is the same
as the INI term "section".
The grammar used is as follows:
Grammar:
inifile: profilelist ;
profilelist: profile | profilelist profile ;
profile: '[' profilename ']' EOL entries ;
entries: empty | entries entry ;
entry: WORD = WORD EOL ;
profilename: WORD ;
Lexical:
WORD sequence of printable characters - [ \[\]=]+
EOL '\n' | ';'
Note:
1. The semicolon at beginning of a line signals a comment.
2. # comments are not allowed
3. Duplicate profiles or keys are ignored.
4. Escape characters are not supported.
*/
#define AWS_EOF (-1)
#define AWS_ERR (0)
#define AWS_WORD (0x10001)
#define AWS_EOL (0x10002)
#ifdef LEXDEBUG
static const char*
tokenname(int token)
{
static char num[32];
switch(token) {
case AWS_EOF: return "EOF";
case AWS_ERR: return "ERR";
case AWS_WORD: return "WORD";
default: snprintf(num,sizeof(num),"%d",token); return num;
}
return "UNKNOWN";
}
#endif
typedef struct AWSparser {
char* text;
char* pos;
size_t yylen; /* |yytext| */
NCbytes* yytext;
int token; /* last token found */
int pushback; /* allow 1-token pushback */
} AWSparser;
static int
awslex(AWSparser* parser)
{
int c;
int token = 0;
char* start;
size_t count;
parser->token = AWS_ERR;
ncbytesclear(parser->yytext);
ncbytesnull(parser->yytext);
if(parser->pushback != AWS_ERR) {
token = parser->pushback;
parser->pushback = AWS_ERR;
goto done;
}
while(token == 0) { /* avoid need to goto when retrying */
c = *parser->pos;
if(c == '\0') {
token = AWS_EOF;
} else if(c == '\n') {
parser->pos++;
token = AWS_EOL;
} else if(c <= ' ' || c == '\177') {
parser->pos++;
continue; /* ignore whitespace */
} else if(c == ';') {
char* p = parser->pos - 1;
if(*p == '\n') {
/* Skip comment */
do {p++;} while(*p != '\n' && *p != '\0');
parser->pos = p;
token = (*p == '\n'?AWS_EOL:AWS_EOF);
} else {
token = ';';
ncbytesappend(parser->yytext,';');
parser->pos++;
}
} else if(c == '[' || c == ']' || c == '=') {
ncbytesappend(parser->yytext,c);
ncbytesnull(parser->yytext);
token = c;
parser->pos++;
} else { /*Assume a word*/
start = parser->pos;
for(;;) {
c = *parser->pos++;
if(c <= ' ' || c == '\177' || c == '[' || c == ']' || c == '=') break; /* end of word */
}
/* Pushback last char */
parser->pos--;
count = ((parser->pos) - start);
ncbytesappendn(parser->yytext,start,count);
ncbytesnull(parser->yytext);
token = AWS_WORD;
}
#ifdef LEXDEBUG
fprintf(stderr,"%s(%d): |%s|\n",tokenname(token),token,ncbytescontents(parser->yytext));
#endif
} /*for(;;)*/
done:
parser->token = token;
return token;
}
/*
@param text of the aws credentials file
@param profiles list of form struct AWSprofile (see ncauth.h)
*/
#define LBR '['
#define RBR ']'
static int
awsparse(const char* text, NClist* profiles)
{
int i,stat = NC_NOERR;
size_t len;
AWSparser* parser = NULL;
struct AWSprofile* profile = NULL;
int token;
char* key = NULL;
char* value = NULL;
if(text == NULL) text = "";
parser = calloc(1,sizeof(AWSparser));
if(parser == NULL)
{stat = (NC_ENOMEM); goto done;}
len = strlen(text);
parser->text = (char*)malloc(len+1+1+1); /* double nul term plus leading EOL */
if(parser->text == NULL)
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
{stat = (NCTHROW(NC_EINVAL)); goto done;}
parser->pos = parser->text;
parser->pos[0] = '\n'; /* So we can test for comment unconditionally */
parser->pos++;
strcpy(parser->text+1,text);
parser->pos += len;
/* Double nul terminate */
parser->pos[0] = '\0';
parser->pos[1] = '\0';
parser->pos = &parser->text[0]; /* reset */
parser->yytext = ncbytesnew();
parser->pushback = AWS_ERR;
/* Do not need recursion, use simple loops */
for(;;) {
token = awslex(parser); /* make token always be defined */
if(token == AWS_EOF) break; /* finished */
if(token == AWS_EOL) {continue;} /* blank line */
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
if(token != LBR) {stat = NCTHROW(NC_EINVAL); goto done;}
/* parse [profile name] */
token = awslex(parser);
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
if(token != AWS_WORD) {stat = NCTHROW(NC_EINVAL); goto done;}
assert(profile == NULL);
if((profile = (struct AWSprofile*)calloc(1,sizeof(struct AWSprofile)))==NULL)
{stat = NC_ENOMEM; goto done;}
profile->name = ncbytesextract(parser->yytext);
profile->entries = nclistnew();
token = awslex(parser);
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
if(token != RBR) {stat = NCTHROW(NC_EINVAL); goto done;}
#ifdef PARSEDEBUG
fprintf(stderr,">>> parse: profile=%s\n",profile->name);
#endif
/* The fields can be in any order */
for(;;) {
struct AWSentry* entry = NULL;
token = awslex(parser);
if(token == AWS_EOL) {
continue; /* ignore empty lines */
} else if(token == AWS_EOF) {
break;
} else if(token == LBR) {/* start of next profile */
parser->pushback = token;
break;
} else if(token == AWS_WORD) {
key = ncbytesextract(parser->yytext);
token = awslex(parser);
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
if(token != '=') {stat = NCTHROW(NC_EINVAL); goto done;}
token = awslex(parser);
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
if(token != AWS_EOL && token != AWS_WORD) {stat = NCTHROW(NC_EINVAL); goto done;}
value = ncbytesextract(parser->yytext);
if((entry = (struct AWSentry*)calloc(1,sizeof(struct AWSentry)))==NULL)
{stat = NC_ENOMEM; goto done;}
entry->key = key; key = NULL;
entry->value = value; value = NULL;
#ifdef PARSEDEBUG
fprintf(stderr,">>> parse: entry=(%s,%s)\n",entry->key,entry->value);
#endif
nclistpush(profile->entries,entry); entry = NULL;
if(token == AWS_WORD) token = awslex(parser); /* finish the line */
} else
Support MSYS2/Mingw platform re: The current netcdf-c release has some problems with the mingw platform on windows. Mostly they are path issues. Changes to support mingw+msys2: ------------------------------- * Enable option of looking into the windows registry to find the mingw root path. In aid of proper path handling. * Add mingw+msys as a specific platform in configure.ac and move testing of the platform to the front so it is available early. * Handle mingw X libncpoco (dynamic loader) properly even though mingw does not yet support it. * Handle mingw X plugins properly even though mingw does not yet support it. * Alias pwd='pwd -W' to better handle paths in shell scripts. * Plus a number of other minor compile irritations. * Disallow the use of multiple nc_open's on the same file for windows (and mingw) because windows does not seem to handle these properly. Not sure why we did not catch this earlier. * Add mountpoint info to dpathmgr.c to help support mingw. * Cleanup dpathmgr conversions. Known problems: --------------- * I have not been able to get shared libraries to work, so plugins/filters must be disabled. * There is some kind of problem with libcurl that I have not solved, so all uses of libcurl (currently DAP+Byterange) must be disabled. Misc. other fixes: ------------------ * Cleanup the relationship between ENABLE_PLUGINS and various other flags in CMakeLists.txt and configure.ac. * Re-arrange the TESTDIRS order in Makefile.am. * Add pseudo-breakpoint to nclog.[ch] for debugging. * Improve the documentation of the path manager code in ncpathmgr.h * Add better support for relative paths in dpathmgr.c * Default the mode args to NCfopen to include "b" (binary) for windows. * Add optional debugging output in various places. * Make sure that everything builds with plugins disabled. * Fix numerous (s)printf inconsistencies betweenb the format spec and the arguments.
2021-12-24 13:18:56 +08:00
{stat = NCTHROW(NC_EINVAL); goto done;}
}
/* If this profile already exists, then ignore new one */
for(i=0;i<nclistlength(profiles);i++) {
struct AWSprofile* p = (struct AWSprofile*)nclistget(profiles,i);
if(strcasecmp(p->name,profile->name)==0) {
/* reclaim and ignore */
freeprofile(profile);
profile = NULL;
break;
}
}
if(profile) nclistpush(profiles,profile);
profile = NULL;
}
done:
if(profile) freeprofile(profile);
nullfree(key);
nullfree(value);
if(parser != NULL) {
nullfree(parser->text);
ncbytesfree(parser->yytext);
free(parser);
}
return (stat);
}
static void
freeentry(struct AWSentry* e)
{
if(e) {
#ifdef AWSDEBUG
fprintf(stderr,">>> freeentry: key=%s value=%s\n",e->key,e->value);
#endif
nullfree(e->key);
nullfree(e->value);
nullfree(e);
}
}
static void
freeprofile(struct AWSprofile* profile)
{
if(profile) {
int i;
#ifdef AWSDEBUG
fprintf(stderr,">>> freeprofile: %s\n",profile->name);
#endif
for(i=0;i<nclistlength(profile->entries);i++) {
struct AWSentry* e = (struct AWSentry*)nclistget(profile->entries,i);
freeentry(e);
}
nclistfree(profile->entries);
nullfree(profile->name);
nullfree(profile);
}
}
static void
freeprofilelist(NClist* profiles)
{
if(profiles) {
int i;
for(i=0;i<nclistlength(profiles);i++) {
struct AWSprofile* p = (struct AWSprofile*)nclistget(profiles,i);
freeprofile(p);
}
nclistfree(profiles);
}
}
/* Find, load, and parse the aws credentials file */
static int
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
aws_load_credentials(NCglobalstate* gstate)
{
int stat = NC_NOERR;
NClist* profiles = nclistnew();
const char** awscfg = awsconfigfiles;
const char* aws_root = getenv(NC_TEST_AWS_DIR);
NCbytes* buf = ncbytesnew();
char path[8192];
for(;*awscfg;awscfg++) {
/* Construct the path ${HOME}/<file> or Windows equivalent. */
const char* cfg = *awscfg;
snprintf(path,sizeof(path),"%s%s%s",
(aws_root?aws_root:gstate->home),
(*cfg == '/'?"":"/"),
cfg);
ncbytesclear(buf);
if((stat=NC_readfile(path,buf))) {
2021-09-29 04:37:32 +08:00
nclog(NCLOGWARN, "Could not open file: %s",path);
} else {
/* Parse the credentials file */
const char* text = ncbytescontents(buf);
if((stat = awsparse(text,profiles))) goto done;
}
}
/* add a "none" credentials */
{
struct AWSprofile* noprof = (struct AWSprofile*)calloc(1,sizeof(struct AWSprofile));
noprof->name = strdup("none");
noprof->entries = nclistnew();
nclistpush(profiles,noprof); noprof = NULL;
}
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
gstate->rcinfo->s3profiles = profiles; profiles = NULL;
#ifdef AWSDEBUG
{int i,j;
fprintf(stderr,">>> profiles:\n");
for(i=0;i<nclistlength(creds->profiles);i++) {
struct AWSprofile* p = (struct AWSprofile*)nclistget(creds->profiles,i);
fprintf(stderr," [%s]",p->name);
for(j=0;j<nclistlength(p->entries);j++) {
struct AWSentry* e = (struct AWSentry*)nclistget(p->entries,j);
fprintf(stderr," %s=%s",e->key,e->value);
}
fprintf(stderr,"\n");
}
}
#endif
done:
ncbytesfree(buf);
freeprofilelist(profiles);
return stat;
}
int
NC_authgets3profile(const char* profilename, struct AWSprofile** profilep)
{
int stat = NC_NOERR;
int i = -1;
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
NCglobalstate* gstate = NC_getglobalstate();
Add support for setting HDF5 alignment property when creating a file re: https://github.com/Unidata/netcdf-c/issues/2177 re: https://github.com/Unidata/netcdf-c/pull/2178 Provide get/set functions to store global data alignment information and apply it when a file is created. The api is as follows: ```` int nc_set_alignment(int threshold, int alignment); int nc_get_alignment(int* thresholdp, int* alignmentp); ```` If defined, then for every file created opened after the call to nc_set_alignment, for every new variable added to the file, the most recently set threshold and alignment values will be applied to that variable. The nc_get_alignment function return the last values set by nc_set_alignment. If nc_set_alignment has not been called, then it returns the value 0 for both threshold and alignment. The alignment parameters are stored in the NCglobalstate object (see below) for use as needed. Repeated calls to nc_set_alignment will overwrite any existing values in NCglobalstate. The alignment parameters are applied in libhdf5/hdf5create.c and libhdf5/hdf5open.c The set/get alignment functions are defined in libsrc4/nc4internal.c. A test program was added as nc_test4/tst_alignment.c. ## Misc. Changes Unrelated to Alignment * The NCRCglobalstate type was renamed to NCglobalstate to indicate that it represented more general global state than just .rc data. It was also moved to nc4internal.h. This led to a large number of small changes: mostly renaming. The global state management functions were moved to nc4internal.c. * The global chunk cache variables have been moved into NCglobalstate. As warranted, other global state will be moved as well. * Some misc. problems with the nczarr performance tests were corrected.
2022-01-30 06:27:52 +08:00
for(i=0;i<nclistlength(gstate->rcinfo->s3profiles);i++) {
struct AWSprofile* profile = (struct AWSprofile*)nclistget(gstate->rcinfo->s3profiles,i);
if(strcmp(profilename,profile->name)==0)
{if(profilep) {*profilep = profile; goto done;}}
}
if(profilep) *profilep = NULL; /* not found */
done:
return stat;
}
int
NC_s3profilelookup(const char* profile, const char* key, const char** valuep)
{
int i,stat = NC_NOERR;
struct AWSprofile* awsprof = NULL;
const char* value = NULL;
if(profile == NULL) return NC_ES3;
stat = NC_authgets3profile(profile,&awsprof);
if(stat == NC_NOERR && awsprof != NULL) {
for(i=0;i<nclistlength(awsprof->entries);i++) {
struct AWSentry* entry = (struct AWSentry*)nclistget(awsprof->entries,i);
if(strcasecmp(entry->key,key)==0) {
value = entry->value;
break;
}
}
}
if(valuep) *valuep = value;
return stat;
}