mirror/netcdf-c
2
0
Fork 0
mirror of https://github.com/Unidata/netcdf-c.git synced 2024-12-21 08:39:46 +08:00
Code Issues Packages Projects Releases Wiki Activity
731d9bbb0b
netcdf-c/ncdap_test/CMakeLists.txt

78 lines
2.4 KiB
CMake
Raw Normal View History

ncdump, other directories updated with copyright stanza.
2018-12-07 06:36:53 +08:00
# Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
# 2015, 2016, 2017, 2018
# University Corporation for Atmospheric Research/Unidata.
# See netcdf-c/COPYRIGHT file for more info.
Reverted changes to C files. Can't change them as that messes with the other configuration paths. Tweaked CMakeLists.txt to set the TOPSRCDIR to the netcdf root.
2019-11-08 06:46:50 +08:00
add_definitions(-D"TOPSRCDIR=${CMAKE_CURRENT_SOURCE_DIR}/../")
add_definitions(-D"TOPBINDIR=${CMAKE_CURRENT_BINARY_DIR}/../")
Added new tests, CMake functionality.
2012-08-22 04:08:53 +08:00
remove_definitions(-DDLL_EXPORT)
Changes to make it possible to nest this project inside of another CMake project.
2019-11-07 00:43:49 +08:00
# add_definitions(-D"TOPSRCDIR=${CMAKE_CURRENT_SOURCE_DIR}")
Modified tests to determine location dynamically instead of from an environmental variable.
2012-08-22 06:52:40 +08:00
Added initial 'make dist', 'make distcheck' support to CMake-based builds.
2013-06-04 00:42:04 +08:00
FILE(GLOB COPY_FILES ${CMAKE_CURRENT_SOURCE_DIR}/*.sh)
Added new tests, CMake functionality.
2012-08-22 04:08:53 +08:00
disabled a remote test that is currently hanging.
2015-05-16 06:08:48 +08:00
FILE(COPY ${COPY_FILES} DESTINATION ${CMAKE_CURRENT_BINARY_DIR}/ FILE_PERMISSIONS OWNER_WRITE OWNER_READ OWNER_EXECUTE)
Added new tests, CMake functionality.
2012-08-22 04:08:53 +08:00
Fix additional big-endian machine error in dap4. Follow on to PR: https://github.com/Unidata/netcdf-c/pull/1302
2019-02-16 02:36:29 +08:00
IF(ENABLE_DAP_REMOTE_TESTS)
BUILD_BIN_TEST(findtestserver)
Avoid spurious test failures when servers fail. re: https://github.com/Unidata/netcdf-c/issues/1451 The situation with the various DAP (and other) remote test servers is currently in a state of flux. For example, Unidata admin is planning to forcibly shift the remote test server to remotetest.unidata.ucar.edu soon. In addition, the server test.opendap.org has shown some recent instability. The result is that various DAP (and byterange) tests can fail unexpectedly. This is an irritant to users and reveals nothing about test sucess or failure. Solve by modifying tests to report server inaccessibility and otherwise pretend to succeed. This puts an onus on Unidata to detect such server failures, but will not cause users to see spurious failures. [Note. Do similar fix for netcdf-java]. The check is: 1. export SETX=1 to cause all the shell scripts to trace 2. search the log files for the phrase "WARNING" (in upper case) and see if it is complaining about not finding a server. Misc. Changes ------------- 1. Added a pingurl program to see if a server was up. 2. modified some test case url targets
2020-01-01 06:42:58 +08:00
BUILD_BIN_TEST(pingurl)
Fix additional big-endian machine error in dap4. Follow on to PR: https://github.com/Unidata/netcdf-c/pull/1302
2019-02-16 02:36:29 +08:00
ENDIF()
Added new tests, CMake functionality.
2012-08-22 04:08:53 +08:00
IF(ENABLE_TESTS)
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE.
2014-03-14 00:06:12 +08:00
# Base tests
# The tests are set up as a combination of shell scripts and executables that
# must be run in a particular order. It is painful but will use macros to help
# keep it from being too bad.
# Binary Test Macro
disabled a remote test that is currently hanging.
2015-05-16 06:08:48 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE.
2014-03-14 00:06:12 +08:00
add_sh_test(ncdap tst_ncdap3)
1. synch with oc 2. fix ocuri parameter handling 3. add ncdap_test/testuri.sh to test parameter handling.
2014-12-28 11:42:01 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE.
2014-03-14 00:06:12 +08:00
IF(NOT MSVC)
add_bin_env_test(ncdap t_dap3a)
add_bin_env_test(ncdap test_cvt)
add_bin_env_test(ncdap test_vara)
ENDIF()
IF(ENABLE_DAP_REMOTE_TESTS)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
Merged utility-based tests fix into cmake-based builds.
2016-09-01 05:48:10 +08:00
IF(BUILD_UTILITIES)
forgot to add to cmake
2017-07-15 06:44:50 +08:00
add_sh_test(ncdap tst_ber)
Merged utility-based tests fix into cmake-based builds.
2016-09-01 05:48:10 +08:00
add_sh_test(ncdap tst_remote3)
Added test in support of https://github.com/Unidata/netcdf-c/issues/1300 and https://github.com/Unidata/netcdf-c/issues/1301
2019-01-30 06:23:03 +08:00
add_sh_test(ncdap tst_zero_len_var)
Temporarily disabled encoding test under cmake
2020-12-05 06:49:30 +08:00
MESSAGE(WARNING "ncdap_test/tst_encode temporarily disabled.")
#add_sh_test(ncdap tst_encode)
# not yet add_sh_test(ncdap tst_hyrax)
Modify DAP2 and DAP4 to optionally allow Fillvalue/Variable mismatch re: issue https://github.com/Unidata/netcdf-c/issues/1151 Modify DAP2 and DAP4 code to handle case when _FillValue type is not same as the parent variable type. Specifically: 1. Define a parameter [fillmismatch] to allow this mismatch; default is to disallow. 2. If allowed, forcibly change the type of the _FillValue to match the parent variable. 3. If allowed Convert the values to match new type 4. Generate a log message 5. if not allowed, then fail Implementing this required some changes to ncdap_test/dapcvt.c Also added test cases. Minor Unrelated Changes: 1. There were a number of warnings about e.g. assigning a const char* to a char*. Fix these 2. In nccopy.1, replace .NP with .IP "n" (re PR https://github.com/Unidata/netcdf-c/pull/1144) 3. fix minor error in ncdump/ocprint
2018-10-02 05:51:43 +08:00
add_sh_test(ncdap tst_fillmismatch)
The ncdap_tests were a mess, so I decided to clean them up to remove cruft and to remove unused site tests and make the tests somewhat more understandable. Also did a fix to libdispatch/dwinpath to convert relative paths to absolute paths. This will, I hope, take care of some windows path problems when using $srcdir in shell scripts.
2018-03-21 11:31:31 +08:00
IF(ENABLE_DAP_LONG_TESTS)
add_sh_test(ncdap tst_longremote3)
ENDIF(ENABLE_DAP_LONG_TESTS)
ncdump, other directories updated with copyright stanza.
2018-12-07 06:36:53 +08:00
Corrected a typo resulting in a cmake warning.
2016-09-07 02:41:48 +08:00
ENDIF(BUILD_UTILITIES)
disabled a remote test that is currently hanging.
2015-05-16 06:08:48 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE.
2014-03-14 00:06:12 +08:00
IF(ENABLE_DAP_AUTH_TESTS)
1. fix nc_open_mem doxygen description 2. fix some bugs wrt to cygwin vs linux. 3. add to RELEASE_NOTES 4. try to fix tst_inmemory fd error by putting the first arg to dotest in quotes.
2015-05-29 09:23:33 +08:00
##obsolete add_bin_test(ncdap t_auth)
Make cmake run testauth.sh
2015-01-01 13:53:03 +08:00
add_sh_test(ncdap testauth)
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE.
2014-03-14 00:06:12 +08:00
ENDIF()
disabled a remote test that is currently hanging.
2015-05-16 06:08:48 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE.
2014-03-14 00:06:12 +08:00
add_bin_test(ncdap test_varm3)
Avoid spurious test failures when servers fail. re: https://github.com/Unidata/netcdf-c/issues/1451 The situation with the various DAP (and other) remote test servers is currently in a state of flux. For example, Unidata admin is planning to forcibly shift the remote test server to remotetest.unidata.ucar.edu soon. In addition, the server test.opendap.org has shown some recent instability. The result is that various DAP (and byterange) tests can fail unexpectedly. This is an irritant to users and reveals nothing about test sucess or failure. Solve by modifying tests to report server inaccessibility and otherwise pretend to succeed. This puts an onus on Unidata to detect such server failures, but will not cause users to see spurious failures. [Note. Do similar fix for netcdf-java]. The check is: 1. export SETX=1 to cause all the shell scripts to trace 2. search the log files for the phrase "WARNING" (in upper case) and see if it is complaining about not finding a server. Misc. Changes ------------- 1. Added a pingurl program to see if a server was up. 2. modified some test case url targets
2020-01-01 06:42:58 +08:00
add_bin_test(ncdap test_nstride_cached)
disabled a remote test that is currently hanging.
2015-05-16 06:08:48 +08:00
Moved test for [NCF-330] out of 'known-failing' fenceposts and into the regular test rotation. Also added it to the autotools-based tests.
2015-05-09 03:43:59 +08:00
###
# This test relates to NCF-330 in
# the Unidata JIRA system.
###
disabled a remote test that is currently hanging.
2015-05-16 06:08:48 +08:00
#add_bin_test(ncdap t_ncf330)
Added test for issue found in [NCF-330].
2015-05-02 05:28:59 +08:00
Cleaned up indentation, white space in multiple CMakeLists.txt files.
2014-04-22 01:15:33 +08:00
ENDIF()
Added new tests, CMake functionality.
2012-08-22 04:08:53 +08:00
ENDIF()
1. synch with oc 2. fix ocuri parameter handling 3. add ncdap_test/testuri.sh to test parameter handling.
2014-12-28 11:42:01 +08:00
Resolved Conflict when cherry-picking patches.
2014-02-07 02:13:45 +08:00
ADD_SUBDIRECTORY(testdata3)
Added initial 'make dist', 'make distcheck' support to CMake-based builds.
2013-06-04 00:42:04 +08:00
ADD_SUBDIRECTORY(expected3)
ADD_SUBDIRECTORY(expectremote3)
## Specify files to be distributed by 'make dist'
FILE(GLOB CUR_EXTRA_DIST RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/*.c ${CMAKE_CURRENT_SOURCE_DIR}/*.h ${CMAKE_CURRENT_SOURCE_DIR}/*.sh)
Fix the NC_INMEMORY code to work in all cases with HDF5 1.10. re: github issue https://github.com/Unidata/netcdf-c/issues/1111 One of the less common use cases for the in-memory feature is apparently failing with HDF5-1.10.x. The fix is complicated and requires significant changes to libhdf5/nc4memcb.c. The current setup is detailed in the file docs/inmeminternal.dox. Additionally, it was discovered that the program nc_test/tst_inmemory.c, which is invoked by nc_test/run_inmemory.sh, actually was failing because of the above problem. But the failure is not detected since the script does not return non-zero value. Other Changes: 1. Fix nc_test_tst_inmemory to return errors correctly. 2. Make ncdap_tests/findtestserver.c and dap4_tests/findtestserver4.c be generated from ncdap_test/findtestserver.c.in. 3. Make LOG() print output to stderr instead of stdout to avoid contaminating e.g. ncdump output. 4. Modify the handling of NC_INMEMORY and NC_DISKLESS flags to properly handle that NC_DISKLESS => NC_INMEMORY. This affects a number of code pieces, especially memio.c.
2018-09-05 01:27:47 +08:00
SET(CUR_EXTRA_DIST ${CUR_EXTRA_DIST} findtestserver.c.in CMakeLists.txt Makefile.am)
Add http auth test to cmake
2013-11-16 04:44:27 +08:00
ADD_EXTRA_DIST("${CUR_EXTRA_DIST}")
Reference in New Issue Copy Permalink