netcdf-c/libdap4/d4swap.c

246 lines
6.7 KiB
C
Raw Normal View History

Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/*********************************************************************
2018-12-07 05:24:28 +08:00
* Copyright 2018, UCAR/Unidata
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
* See netcdf/COPYRIGHT file for copying and redistribution conditions.
*********************************************************************/
#include "d4includes.h"
#include <stdarg.h>
#include "d4includes.h"
/*
2018-04-24 06:38:08 +08:00
The primary purpose of this code is to recursively traverse
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
the incoming data to get the endianness correct.
*/
/* Forward */
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
static int walkAtomicVar(NCD4meta*, NCD4node*, NCD4node*, NCD4offset* offset);
static int walkOpaqueVar(NCD4meta*,NCD4node*, NCD4node*, NCD4offset* offset);
static int walkStructArray(NCD4meta*,NCD4node*, NCD4node*, NCD4offset* offset);
static int walkStruct(NCD4meta*, NCD4node*, NCD4node*, NCD4offset* offset);
static int walkSeqArray(NCD4meta*, NCD4node*, NCD4node*, NCD4offset* offset);
static int walkSeq(NCD4meta*,NCD4node*, NCD4node*, NCD4offset* offset);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/**************************************************/
/*
Assumes that compiler->swap is true; does necessary
byte swapping.
*/
int
NCD4_swapdata(NCD4meta* compiler, NClist* topvars)
{
int ret = NC_NOERR;
int i;
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
NCD4offset* offset = NULL;
offset = BUILDOFFSET(compiler->serial.dap,compiler->serial.dapsize);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
for(i=0;i<nclistlength(topvars);i++) {
NCD4node* var = (NCD4node*)nclistget(topvars,i);
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
OFFSET2BLOB(var->data.dap4data,offset);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
switch (var->subsort) {
default:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkAtomicVar(compiler,var,var,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_OPAQUE:
/* The only thing we need to do is swap the counts */
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkOpaqueVar(compiler,var,var,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_STRUCT:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkStructArray(compiler,var,var,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_SEQ:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkSeqArray(compiler,var,var,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
}
var->data.dap4data.size = DELTA(offset,var->data.dap4data.memory);
/* skip checksum, if there is one */
if(var->data.remotechecksummed)
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
INCR(offset,CHECKSUMSIZE);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
done:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if(offset) free(offset);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
return THROW(ret);
}
static int
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
walkAtomicVar(NCD4meta* compiler, NCD4node* topvar, NCD4node* var, NCD4offset* offset)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
d4size_t i;
nc_type subsort;
d4size_t dimproduct;
NCD4node* basetype;
basetype = (var->sort == NCD4_TYPE ? var : var->basetype);
subsort = basetype->subsort;
dimproduct = (var->sort == NCD4_TYPE ? 1 : NCD4_dimproduct(var));
if(subsort == NC_ENUM)
subsort = var->basetype->basetype->subsort;
/* Only need to swap multi-byte integers and floats */
if(subsort != NC_STRING) {
int typesize = NCD4_typesize(subsort);
d4size_t totalsize = typesize*dimproduct;
if(typesize == 1) {
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
INCR(offset,totalsize);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
} else { /*(typesize > 1)*/
for(i=0;i<dimproduct;i++) {
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
char* sp = offset->offset;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(compiler->swap) {
switch (typesize) {
case 2: swapinline16(sp); break;
case 4: swapinline32(sp); break;
case 8: swapinline64(sp); break;
default: break;
}
}
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
INCR(offset,typesize);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
}
} else if(subsort == NC_STRING) { /* remaining case; just convert the counts */
COUNTERTYPE count;
for(i=0;i<dimproduct;i++) {
/* Get string count */
if(compiler->swap)
swapinline64(offset);
count = GETCOUNTER(offset);
SKIPCOUNTER(offset);
/* skip count bytes */
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
INCR(offset,count);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
}
return THROW(ret);
}
static int
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
walkOpaqueVar(NCD4meta* compiler, NCD4node* topvar, NCD4node* var, NCD4offset* offset)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
d4size_t i;
unsigned long long count;
d4size_t dimproduct = NCD4_dimproduct(var);
dimproduct = (var->sort == NCD4_TYPE ? 1 : NCD4_dimproduct(var));
for(i=0;i<dimproduct;i++) {
/* Get and swap opaque count */
if(compiler->swap)
swapinline64(offset);
count = GETCOUNTER(offset);
SKIPCOUNTER(offset);
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
INCR(offset,count);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
return THROW(ret);
}
static int
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
walkStructArray(NCD4meta* compiler, NCD4node* topvar, NCD4node* var, NCD4offset* offset)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
d4size_t i;
d4size_t dimproduct = NCD4_dimproduct(var);
NCD4node* basetype = var->basetype;
for(i=0;i<dimproduct;i++) {
/* Swap, possibly recursively, the single struct pointed to by offset*/
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkStruct(compiler,topvar,basetype,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
return THROW(ret);
}
static int
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
walkStruct(NCD4meta* compiler, NCD4node* topvar, NCD4node* structtype, NCD4offset* offset)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
int i;
for(i=0;i<nclistlength(structtype->vars);i++) {
NCD4node* field = (NCD4node*)nclistget(structtype->vars,i);
NCD4node* fieldbase = field->basetype;
switch (fieldbase->subsort) {
default:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkAtomicVar(compiler,topvar,field,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_OPAQUE:
/* The only thing we need to do is swap the counts */
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkOpaqueVar(compiler,topvar,field,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_STRUCT:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkStructArray(compiler,topvar,field,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_SEQ:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkSeqArray(compiler,topvar,field,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
}
}
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
return THROW(ret);
}
static int
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
walkSeqArray(NCD4meta* compiler, NCD4node* topvar, NCD4node* var, NCD4offset* offset)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
d4size_t i;
d4size_t dimproduct;
NCD4node* seqtype;
assert(var->sort == NCD4_VAR);
dimproduct = NCD4_dimproduct(var);
seqtype = var->basetype;
for(i=0;i<dimproduct;i++) {
/* Swap, possibly recursively, the single seq pointed to by offset*/
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkSeq(compiler,topvar,seqtype,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
return THROW(ret);
}
/*
Remember that the base type of var is a vlen.
*/
static int
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
walkSeq(NCD4meta* compiler, NCD4node* topvar, NCD4node* vlentype, NCD4offset* offset)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int ret = NC_NOERR;
int i;
d4size_t recordcount;
NCD4node* basetype;
/* process the record count */
if(compiler->swap)
swapinline64(offset);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
recordcount = GETCOUNTER(offset);
SKIPCOUNTER(offset);
basetype = vlentype->basetype; /* This may be of any type potentially */
2017-11-04 19:34:36 +08:00
assert(basetype->sort == NCD4_TYPE);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
for(i=0;i<recordcount;i++) {
switch(basetype->subsort) {
default: /* atomic basetype */
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkAtomicVar(compiler,topvar,basetype,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_OPAQUE:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkOpaqueVar(compiler,topvar,basetype,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_STRUCT:
/* We can treat each record like a structure instance */
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkStruct(compiler,topvar,basetype,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
case NC_SEQ:
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
if((ret=walkSeq(compiler,topvar,basetype,offset))) goto done;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
break;
}
}
Fix DAP4 remotetest server Warning: This PR is a follow on to PR https://github.com/Unidata/netcdf-c/pull/2555 and should not be merged until that prior PR has been merged. The changeset for this PR is a delta on the PR https://github.com/Unidata/netcdf-c/pull/2555. This PR re-enables the use of the server *remotetest.unidata.ucar.edu/d4ts* to test several features: 1. Show that access over the Internet to servers using the DAP4 protocol works. 2. Test that DAP4 support in the [Thredds Data Server](https://github.com/Unidata/tds) is operating correctly. 4. Test that the DAP4 support in the [netcdf-java library](https://github.com/Unidata/netcdf-java) library and the DAP4 support in the netcdf-c library are consistent and are interoperable. The test inputs (primarily *\*.nc* files) provided in the netcdf-c library are also used by the DAP4 Test Server (aka d4ts) to present web access to a collection of data files accessible via the DAP4 protocol and which can be used for testing Internet access to a working server. To be precise, this version of d4ts is currently in unmerged branches of the *netcdf-java* and *tds* Github repositories and so are not actually in the main repositories *yet*. However, the *d4ts.war* file was created from that branch and used to populate the *remotetest.unidata.ucar.edu* server The two other remote servers that were used in the past are *Hyrax* (OPenDAP.org) and *thredds-test*. These will continue to remain disabled until those servers can be fixed. ## Primary Changes * Rebuild the *baselineremote* directory. This directory contains the validation data needed to test the remote servers. * Re-enable using remotetest.unidata.ucar.edu as part of the DAP4 testing process. * Fix the *dap4_test/test_remote.sh* test script to match the current available test data. * Make some changes to libdap4 to improve the ability to catch malformed data streams [affects a lot of files in libdap4]. ## Misc. Unrelated Changes * Remove a raft of warnings, especially in nc_test4/tst_quantize.c. * Add some additional explanatory information to the NCZarr documentation. * Cleanup some Doxygen errors in the docs file and reorder some files.
2022-11-16 11:29:21 +08:00
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
done:
return THROW(ret);
}