netcdf-c/libhdf5/nc4info.c

654 lines
17 KiB
C
Raw Normal View History

2017-12-05 03:21:14 +08:00
/**
* @file
* @internal Add provenance info for netcdf-4 files.
*
* Copyright 2010, UCAR/Unidata See netcdf/COPYRIGHT file for copying
* and redistribution conditions.
* @author Dennis Heimbigner
*/
2018-07-16 18:50:15 +08:00
#include "config.h"
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#include "nc4internal.h"
#include "hdf5internal.h"
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#include "nclist.h"
#include "ncbytes.h"
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Various Constants */
#define NCPROPS_MAX_NAME 1024 /* max key name size */
#define NCPROPS_MAX_VALUE 1024 /* max value size */
2017-12-05 03:21:14 +08:00
#define HDF5_MAX_NAME 1024 /**< HDF5 max name. */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#define ESCAPECHARS "\\=|,"
2017-12-05 03:21:14 +08:00
/** @internal Check NetCDF return code. */
#define NCHECK(expr) {if((expr)!=NC_NOERR) {goto done;}}
2017-12-05 03:21:14 +08:00
/** @internal Check HDF5 return code. */
#define HCHECK(expr) {if((expr)<0) {ncstat = NC_EHDFERR; goto done;}}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
static int globalpropinitialized = 0;
2017-12-05 03:21:14 +08:00
struct NCPROPINFO globalpropinfo; /**< Global property info. */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Forward */
static int properties_parse(const char* text0, NClist* pairs);
2017-12-05 03:21:14 +08:00
/**
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* @internal Initialize default provenance info
* This will only be used for newly created files
* or for opened files that do not contain an _NCProperties
* attribute.
2017-12-05 03:21:14 +08:00
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
int
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
NC4_provenance_init(void)
{
int stat = NC_NOERR;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int i;
NClist* other = NULL;
char* name = NULL;
char* value = NULL;
unsigned major,minor,release;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(globalpropinitialized)
return stat;
/* Build _NCProperties info */
/* Initialize globalpropinfo */
memset((void*)&globalpropinfo,0,sizeof(globalpropinfo));
globalpropinfo.version = NCPROPS_VERSION;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
globalpropinfo.properties = nclistnew();
if(globalpropinfo.properties == NULL)
{stat = NC_ENOMEM; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Insert primary library version as first entry */
if((name = strdup(NCPNCLIB2)) == NULL)
{stat = NC_ENOMEM; goto done;}
nclistpush(globalpropinfo.properties,name);
name = NULL; /* Avoid multiple free() */
if((value = strdup(PACKAGE_VERSION)) == NULL)
{stat = NC_ENOMEM; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
nclistpush(globalpropinfo.properties,value);
value = NULL;
/* Insert the HDF5 as underlying storage format library */
if((name = strdup(NCPHDF5LIB2)) == NULL)
{stat = NC_ENOMEM; goto done;}
nclistpush(globalpropinfo.properties,name);
name = NULL;
stat = NC4_hdf5get_libversion(&major,&minor,&release);
if(stat) goto done;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
{
char sversion[64];
snprintf(sversion,sizeof(sversion),"%1u.%1u.%1u",major,minor,release);
if((value = strdup(sversion)) == NULL)
{stat = NC_ENOMEM; goto done;}
}
nclistpush(globalpropinfo.properties,value);
value = NULL;
/* Add any extra fields */
/*Parse them into an NClist */
other = nclistnew();
if(other == NULL) {stat = NC_ENOMEM; goto done;}
#ifdef NCPROPERTIES
stat = properties_parse(NCPROPERTIES_EXTRA,other);
if(stat) goto done;
#endif
/* merge into the properties list */
for(i=0;i<nclistlength(other);i++)
nclistpush(globalpropinfo.properties,strdup(nclistget(other,i)));
nclistfreeall(other);
other = NULL;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
done:
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(name != NULL) free(name);
if(value != NULL) free(value);
if(other != NULL)
nclistfreeall(other);
if(stat && globalpropinfo.properties != NULL) {
nclistfreeall(globalpropinfo.properties);
globalpropinfo.properties = NULL;
}
if(stat == NC_NOERR)
globalpropinitialized = 1; /* avoid repeating it */
return stat;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Locate a specific character and return its pointer
or EOS if not found
take \ escapes into account */
static char*
locate(char* p, char tag)
{
char* next;
int c;
assert(p != NULL);
for(next = p;(c = *next);next++) {
if(c == tag)
return next;
else if(c == '\\' && next[1] != '\0')
next++; /* skip escaped char */
}
return next; /* not found */
}
/**
* @internal finalize default provenance info
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
int
NC4_provenance_finalize(void)
{
nclistfreeall(globalpropinfo.properties);
return NC_NOERR;
}
2017-12-05 03:21:14 +08:00
/**
* @internal Parse file properties.
*
Revert/Improve nc_create + NC_DISKLESS behavior re: https://github.com/Unidata/netcdf-c/issues/1154 Inadvertently, the behavior of NC_DISKLESS with nc_create() was changed in release 4.6.1. Previously, the NC_WRITE flag needed to be explicitly used with NC_DISKLESS in order to cause the created file to be persisted to disk. Additional analyis indicated that the current NC_DISKLESS implementation was seriously flawed. This PR attempts to clean up and regularize the situation with respect to NC_DISKLESS control. One important aspect of diskless operation is that there are two different notions of write. 1. The file is read-write vs read-only when using the netcdf API. 2. The file is persisted or not to disk at nc_close(). Previously, these two were conflated. The rules now are as follows. 1. NC_DISKLESS + NC_WRITE means that the file is read/write using the netcdf API 2. NC_DISKLESS + NC_PERSIST means that the file is persisted to a disk file at nc_close. 3. NC_DISKLESS + NC_PERSIST + NC_WRITE means both 1 and 2. The NC_PERSIST flag is new and takes over the obsolete NC_MPIPOSIX flag. NC_MPIPOSIX is still defined, but is now an alias for the NC_MPIIO flag. It is also now the case that for netcdf-4, NC_DISKLESS is independent of NC_INMEMORY and in fact it is an error to specify both flags simultaneously. Finally, the MMAP code was fixed to use NC_PERSIST as well. Also marked MMAP as deprecated. Also added a test case to test various combinations of NC_DISKLESS, NC_PERSIST, and NC_WRITE. This PR affects a number of files and especially test cases that used NC_DISKLESS. Misc. Unrelated fixes 1. fixed some warnings in ncdump/dumplib.c
2018-10-11 03:32:17 +08:00
* @param text0 Text properties.
* @param pairs list of parsed (key,value) pairs
2017-12-05 03:21:14 +08:00
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
static int
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
properties_parse(const char* text0, NClist* pairs)
{
int ret = NC_NOERR;
char* p;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
char* q;
char* text = NULL;
if(text0 == NULL || strlen(text0) == 0)
goto done;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
text = strdup(text0);
if(text == NULL) return NC_ENOMEM;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* For back compatibility with version 1, translate '|' -> ',' */
for(p=text;*p;p++) {
if(*p == NCPROPSSEP1)
*p = NCPROPSSEP2;
}
/* Walk and fill in ncinfo */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
p = text;
while(*p) {
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
char* name = p;
char* value = NULL;
char* next = NULL;
/* Delimit whole (key,value) pair */
q = locate(p,NCPROPSSEP2);
if(*q != '\0') /* Never go beyond the final nul term */
*q++ = '\0';
next = q;
/* split key and value */
q = locate(p,'=');
name = p;
*q++ = '\0';
value = q;
/* Set up p for next iteration */
p = next;
nclistpush(pairs,strdup(name));
nclistpush(pairs,strdup(value));
}
done:
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(text) free(text);
return ret;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Utility to transfer a string to a buffer with escaping */
static void
escapify(NCbytes* buffer, const char* s)
{
const char* p;
for(p=s;*p;p++) {
if(strchr(ESCAPECHARS,*p) != NULL)
ncbytesappend(buffer,'\\');
ncbytesappend(buffer,*p);
}
}
/* Utility to copy contents of the dfalt into an NCPROPINFO object */
static int
propinfo_default(struct NCPROPINFO* dst, const struct NCPROPINFO* dfalt)
{
int i;
if(dst->properties == NULL) {
dst->properties = nclistnew();
if(dst->properties == NULL) return NC_ENOMEM;
}
dst->version = dfalt->version;
for(i=0;i<nclistlength(dfalt->properties);i++) {
char* s = nclistget(dfalt->properties,i);
s = strdup(s);
if(s == NULL) return NC_ENOMEM;
nclistpush(dst->properties,s);
}
return NC_NOERR;
}
2017-12-05 03:21:14 +08:00
/**
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* @internal Build _NCProperties attribute value.
2017-12-05 03:21:14 +08:00
*
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* Convert a NCPROPINFO instance to a single string.
*
* @param info Properties info.
* @param propdatap Pointer that gets properties string.
2017-12-05 03:21:14 +08:00
*
* @return ::NC_NOERR No error.
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* @return ::NC_EINVAL failed.
2017-12-05 03:21:14 +08:00
* @author Dennis Heimbigner
*/
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int
NC4_buildpropinfo(struct NCPROPINFO* info, char** propdatap)
{
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int stat = NC_NOERR;
int i;
NCbytes* buffer = NULL;
char sversion[64];
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(info == NULL || info->version == 0 || propdatap == NULL)
{stat = NC_EINVAL; goto done;}
*propdatap = NULL;
buffer = ncbytesnew();
if(!buffer) {stat = NC_ENOMEM; goto done;}
/* start with version */
ncbytescat(buffer,NCPVERSION);
ncbytesappend(buffer,'=');
snprintf(sversion,sizeof(sversion),"%d",info->version);
ncbytescat(buffer,sversion);
for(i=0;i<nclistlength(info->properties);i+=2) {
char* value, *name;
name = nclistget(info->properties,i);
if(name == NULL) continue;
value = nclistget(info->properties,i+1);
ncbytesappend(buffer,NCPROPSSEP2); /* terminate last entry */
escapify(buffer,name);
ncbytesappend(buffer,'=');
escapify(buffer,value);
2016-09-15 06:11:22 +08:00
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Force null termination */
ncbytesnull(buffer);
*propdatap = ncbytesextract(buffer);
done:
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(buffer != NULL) ncbytesfree(buffer);
return stat;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#if 0
2017-12-05 03:21:14 +08:00
/**
* @internal Write the properties attribute to file.
*
* @param h5 Pointer to HDF5 file info struct.
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
int
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
NC4_put_ncproperties(NC_FILE_INFO_T* file)
{
int ncstat = NC_NOERR;
2016-09-15 06:20:43 +08:00
char* text = NULL;
/* Get root group */
grp = h5->root_grp->hdf_grpid; /* get root group */
/* See if the NCPROPS attribute exists */
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(H5Aexists(grp,NCPROPS) <= 0) { /* Does not exist */
2016-09-15 06:20:43 +08:00
ncstat = NC4_buildpropinfo(&h5->fileinfo->propattr,&text);
if(text == NULL || ncstat != NC_NOERR) {
goto done;
}
/* Create a datatype to refer to. */
HCHECK((atype = H5Tcopy(H5T_C_S1)));
HCHECK((H5Tset_cset(atype, H5T_CSET_ASCII)));
HCHECK((H5Tset_size(atype, strlen(text)+1))); /*keep nul term */
HCHECK((aspace = H5Screate(H5S_SCALAR)));
HCHECK((attid = H5Acreate(grp, NCPROPS, atype, aspace, H5P_DEFAULT)));
HCHECK((H5Awrite(attid, atype, text)));
}
2016-09-15 06:20:43 +08:00
done:
if(text != NULL) {
free(text);
text = NULL;
2016-09-15 06:20:43 +08:00
}
2016-09-15 06:16:06 +08:00
if(attid >= 0) HCHECK((H5Aclose(attid)));
if(aspace >= 0) HCHECK((H5Sclose(aspace)));
if(atype >= 0) HCHECK((H5Tclose(atype)));
return ncstat;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#endif
2017-12-05 03:21:14 +08:00
/**
* @internal
*
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* Construct the provenance information for a newly created file
* using dfalt as the default.
* Note that creation of the _NCProperties attribute is deferred
* to the sync_netcdf4_file function.
*
* @param file Pointer to file object.
* @param dfalt
2017-12-05 03:21:14 +08:00
*
* @return ::NC_NOERR No error.
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* [Note: other errors are reported via LOG()]
2017-12-05 03:21:14 +08:00
* @author Dennis Heimbigner
*/
int
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
NC4_set_provenance(NC_FILE_INFO_T* file, const struct NCPROPINFO* dfalt)
{
int ncstat = NC_NOERR;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
struct NCPROVENANCE* provenance = NULL;
int superblock = -1;
assert(file->provenance == NULL);
provenance = calloc(1,sizeof(struct NCPROVENANCE));
if(provenance == NULL) {ncstat = NC_ENOMEM; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Initialize from the default */
provenance->propattr.version = globalpropinfo.version;
/* Get the superblock number */
if((ncstat = NC4_hdf5get_superblock(file,&superblock)))
goto done;
provenance->superblockversion = superblock;
/* Capture properties */
provenance->propattr.properties = nclistnew();
if(provenance->propattr.properties == NULL)
{ncstat = NC_ENOMEM; goto done;}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* add in the dfalt values */
if(dfalt != NULL) {
int i;
for(i=0;i<nclistlength(dfalt->properties);i++) {
char* prop = nclistget(dfalt->properties,i);
if(prop != NULL) {
prop = strdup(prop);
if(prop == NULL) {ncstat = NC_ENOMEM; goto done;}
nclistpush(provenance->propattr.properties,prop);
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
}
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
done:
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(ncstat) {
LOG((0,"Could not create _NCProperties attribute"));
(void)NC4_free_provenance(provenance);
} else
file->provenance = provenance;
return NC_NOERR;
}
/**
* @internal
*
* Construct the provenance information for a newly opened file
* Using the specified _NCProperties value. If NULL, then
* initialize using dfalt.
*
* @param file Pointer to file object.
* @param propstring The contents of _NCProperties
* @param dfalt
*
* @return ::NC_NOERR No error.
* @return ::NC_ENOMEM
* @return ::NC_EINVAL
* @author Dennis Heimbigner
*/
int
NC4_get_provenance(NC_FILE_INFO_T* file, const char* propstring, const struct NCPROPINFO* dfalt)
{
int ncstat = NC_NOERR;
struct NCPROVENANCE* provenance;
char *name = NULL;
char *value = NULL;
int v = 0;
int superblock = -1;
assert(file->provenance == NULL);
if((file->provenance = calloc(1,sizeof(struct NCPROVENANCE))) == NULL)
{ncstat = NC_ENOMEM; goto done;}
provenance = file->provenance;
if((provenance->propattr.properties = nclistnew()) == NULL)
{ncstat = NC_ENOMEM; goto done;}
/* Set the superblock */
if((ncstat = NC4_hdf5get_superblock(file,&superblock)))
goto done;
provenance->superblockversion = superblock;
if(propstring == NULL) {
/* Use dfalt */
if((ncstat=propinfo_default(&provenance->propattr,dfalt)))
goto done;
} else {
NClist* list = provenance->propattr.properties;
if((ncstat=properties_parse(propstring,list)))
goto done;
/* Check the version and remove from properties list*/
if(nclistlength(list) < 2)
{ncstat = NC_EINVAL; goto done;} /* bad _NCProperties attribute */
/* Extract the purported version=... */
name = nclistremove(list,0);
value = nclistremove(list,0);
if(strcmp(name,NCPVERSION) == 0) {
if(sscanf(value,"%d",&v) != 1)
{ncstat = NC_EINVAL; goto done;} /* illegal version */
if(v <= 0 || v > NCPROPS_VERSION)
{ncstat = NC_EINVAL; goto done;} /* unknown version */
provenance->propattr.version = v;
} else
{ncstat = NC_EINVAL; goto done;} /* bad _NCProperties attribute */
#if 0
/* Now, rebuild from version 1 to version 2 if necessary */
if(provenance->propattr.version == 1) {
int i;
for(i=0;i<nclistlength(list);i+=2) {
char* newname = NULL;
name = nclistget(list,i);
if(name == NULL) continue; /* ignore */
if(strcmp(name,NCPNCLIB1) == 0)
newname = NCPNCLIB2; /* change name */
else if(strcmp(name,NCPHDF5LIB1) == 0)
newname = NCPHDF5LIB2;
else continue; /* ignore */
/* Do any rename */
nclistset(list,i,strdup(newname));
if(name) free(name);
}
}
#endif
}
done:
if(name != NULL) free(name);
if(value != NULL) free(value);
2016-09-15 06:11:22 +08:00
return ncstat;
}
2017-12-05 03:21:14 +08:00
/**
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* @internal
2017-12-05 03:21:14 +08:00
*
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
* Free the NCPROVENANCE object
* @param prov Pointer to provenance object
2017-12-05 03:21:14 +08:00
*
* @return ::NC_NOERR No error.
* @author Dennis Heimbigner
*/
int
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
NC4_free_provenance(struct NCPROVENANCE* prov)
{
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(prov == NULL) return NC_NOERR;
if(prov->propattr.properties != NULL);
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
nclistfreeall(prov->propattr.properties);
prov->propattr.properties = NULL;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
free(prov);
return NC_NOERR;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* HDF5 Specific attribute read/write of _NCProperties */
int
NC4_read_ncproperties(NC_FILE_INFO_T* h5)
{
int retval = NC_NOERR;
hid_t hdf5grpid = -1;
hid_t attid = -1;
hid_t aspace = -1;
hid_t atype = -1;
hid_t ntype = -1;
char* text = NULL;
H5T_class_t t_class;
hsize_t size;
hdf5grpid = h5->root_grp->hdf_grpid;
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
if(H5Aexists(hdf5grpid,NCPROPS) <= 0) { /* Does not exist */
/* File did not contain a _NCProperties attribute */
retval=NC4_get_provenance(h5,NULL,&globalpropinfo);
goto done;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* NCPROPS Attribute exists, make sure it is legitimate */
attid = H5Aopen_name(hdf5grpid, NCPROPS);
assert(attid > 0);
aspace = H5Aget_space(attid);
atype = H5Aget_type(attid);
/* Verify atype and size */
t_class = H5Tget_class(atype);
if(t_class != H5T_STRING)
{retval = NC_EINVAL; goto done;}
size = H5Tget_size(atype);
if(size == 0)
{retval = NC_EINVAL; goto done;}
text = (char*)malloc(1+(size_t)size);
if(text == NULL)
{retval = NC_ENOMEM; goto done;}
if((ntype = H5Tget_native_type(atype, H5T_DIR_DEFAULT)) < 0)
{retval = NC_EHDFERR; goto done;}
if((H5Aread(attid, ntype, text)) < 0)
{retval = NC_EHDFERR; goto done;}
/* Make sure its null terminated */
text[(size_t)size] = '\0';
/* Process the _NCProperties value */
if((retval = NC4_get_provenance(h5, text, &globalpropinfo)))
goto done;
done:
if(text != NULL) free(text);
/* Close out the HDF5 objects */
if(attid > 0 && H5Aclose(attid) < 0) retval = NC_EHDFERR;
if(aspace > 0 && H5Sclose(aspace) < 0) retval = NC_EHDFERR;
if(atype > 0 && H5Tclose(atype) < 0) retval = NC_EHDFERR;
if(ntype > 0 && H5Tclose(ntype) < 0) retval = NC_EHDFERR;
/* For certain errors, actually fail, else log that attribute was invalid and ignore */
if(retval != NC_ENOMEM && retval != NC_EHDFERR) {
LOG((0,"Invalid _NCProperties attribute"));
retval = NC_NOERR;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
return retval;
}
2016-09-15 06:26:08 +08:00
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
int
NC4_write_ncproperties(NC_FILE_INFO_T* h5)
{
int retval = NC_NOERR;
hid_t hdf5grpid = -1;
hid_t attid = -1;
hid_t aspace = -1;
hid_t atype = -1;
char* text = NULL;
size_t len = 0;
/* If the file is read-only, return an error. */
if (h5->no_write)
{retval = NC_EPERM; goto done;}
hdf5grpid = h5->root_grp->hdf_grpid;
if(H5Aexists(hdf5grpid,NCPROPS) > 0) /* Already exists, no overwrite */
goto done;
/* Build the attribute string */
if((retval = NC4_buildpropinfo(&h5->provenance->propattr,&text)))
goto done;
/* Build the HDF5 string type */
if ((atype = H5Tcopy(H5T_C_S1)) < 0)
{retval = NC_EHDFERR; goto done;}
if (H5Tset_strpad(atype, H5T_STR_NULLTERM) < 0)
{retval = NC_EHDFERR; goto done;}
if(H5Tset_cset(atype, H5T_CSET_ASCII) < 0)
{retval = NC_EHDFERR; goto done;}
/* Create NCPROPS attribute */
len = strlen(text);
if(H5Tset_size(atype, len) < 0)
{retval = NC_EFILEMETA; goto done;}
if((aspace = H5Screate(H5S_SCALAR)) < 0)
{retval = NC_EFILEMETA; goto done;}
if ((attid = H5Acreate(hdf5grpid, NCPROPS, atype, aspace, H5P_DEFAULT)) < 0)
{retval = NC_EFILEMETA; goto done;}
if (H5Awrite(attid, atype, text) < 0)
{retval = NC_EFILEMETA; goto done;}
done:
if(text != NULL) free(text);
/* Close out the HDF5 objects */
if(attid > 0 && H5Aclose(attid) < 0) retval = NC_EHDFERR;
if(aspace > 0 && H5Sclose(aspace) < 0) retval = NC_EHDFERR;
if(atype > 0 && H5Tclose(atype) < 0) retval = NC_EHDFERR;
/* For certain errors, actually fail, else log that attribute was invalid and ignore */
switch (retval) {
case NC_ENOMEM:
case NC_EHDFERR:
case NC_EPERM:
case NC_EFILEMETA:
case NC_NOERR:
break;
default:
LOG((0,"Invalid _NCProperties attribute"));
retval = NC_NOERR;
break;
}
return retval;
}
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
/* Debugging */
void
ncprintpropinfo(struct NCPROPINFO* info)
{
int i;
fprintf(stderr,"[%p] version=%d\n",info,info->version);
for(i=0;i<nclistlength(info->properties);i+=2) {
char* name = nclistget(info->properties,i);
char* value = nclistget(info->properties,i+1);
fprintf(stderr,"\t[%d] name=|%s| value=|%s|\n",i,name,value);
}
}
void
ncprintprovenance(struct NCPROVENANCE* prov)
{
fprintf(stderr,"[%p] superblockversion=%d\n",prov,prov->superblockversion);
ncprintpropinfo(&prov->propattr);
}