netcdf-c/libdap4/d4read.c

310 lines
8.1 KiB
C
Raw Normal View History

2018-12-07 05:24:28 +08:00
/*! \file
Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
2015, 2016, 2017, 2018
University Corporation for Atmospheric Research/Unidata.
See \ref copyright file for more info.
*/
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#include "d4includes.h"
#include "d4curlfunctions.h"
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif
#include "ncpathmgr.h"
2017-04-15 01:05:30 +08:00
/* Do conversion if this code was compiled via Vis. Studio or Mingw */
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/*Forward*/
static int readpacket(NCD4INFO* state, NCURI*, NCbytes*, NCD4mode, NCD4format, int*, long*);
static int readfile(NCD4INFO* state, const NCURI* uri, NCD4mode dxx, NCD4format fxx, NCbytes* packet);
static int readfileDAPDMR(NCD4INFO* state, const NCURI* uri, NCbytes* packet);
#ifdef HAVE_GETTIMEOFDAY
static double
deltatime(struct timeval time0,struct timeval time1)
{
double t0, t1;
t0 = ((double)time0.tv_sec);
t0 += ((double)time0.tv_usec) / 1000000.0;
t1 = ((double)time1.tv_sec);
t1 += ((double)time1.tv_usec) / 1000000.0;
return (t1 - t0);
}
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
int
NCD4_readDMR(NCD4INFO* state, NCURI* url, NCD4response* resp)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int stat = NC_NOERR;
ncbytesclear(state->curl->packet);
stat = readpacket(state,url,state->curl->packet,NCD4_DMR,NCD4_FORMAT_XML,&resp->serial.httpcode,NULL);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
return THROW(stat);
}
int
NCD4_readDAP(NCD4INFO* state, NCURI* url, NCD4response* resp)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int stat = NC_NOERR;
ncbytesclear(state->curl->packet);
stat = readpacket(state,url,state->curl->packet,NCD4_DAP,NCD4_FORMAT_NONE,&resp->serial.httpcode,NULL);
if(stat) {
NCD4_seterrormessage(resp, nclistlength(state->curl->packet), nclistcontents(state->curl->packet));
} else {
resp->raw.size = ncbyteslength(state->curl->packet);
resp->raw.memory = ncbytesextract(state->curl->packet);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
return THROW(stat);
}
static const char*
dxxextension(int dxx)
{
switch(dxx) {
case NCD4_DMR: return ".dmr";
case NCD4_DAP: return ".dap";
default: break;
}
return NULL;
}
static const char*
dxxformat(int fxx, int dxx)
{
switch(dxx) {
case NCD4_DMR:
switch(fxx) {
case NCD4_FORMAT_XML:return ".xml";
default: break;
}
break;
case NCD4_DAP:
switch(fxx) {
case NCD4_FORMAT_NONE:return "";
default: break;
}
break;
default: break;
}
return NULL;
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int
readpacket(NCD4INFO* state, NCURI* url, NCbytes* packet, NCD4mode dxx, NCD4format fxx, int* httpcodep, long* lastmodified)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int stat = NC_NOERR;
int fileprotocol = 0;
CURL* curl = state->curl->curl;
#ifdef HAVE_GETTIMEOFDAY
struct timeval time0;
struct timeval time1;
#endif
char suffix[256];
suffix[0] = '\0';
strlcat(suffix,dxxextension(dxx),sizeof(suffix));
strlcat(suffix,dxxformat(fxx,dxx),sizeof(suffix));
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
fileprotocol = (strcmp(url->protocol,"file")==0);
if(fileprotocol) {
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
/* Short circuit file://... urls*/
/* We do this because the test code always needs to read files*/
stat = readfile(state, url, dxx, fxx, packet);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
} else {
char* fetchurl = NULL;
int flags = NCURIBASE;
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(!fileprotocol) flags |= NCURIQUERY;
flags |= NCURIENCODE;
fetchurl = ncuribuild(url,NULL,suffix,flags);
MEMCHECK(fetchurl);
if(FLAGSET(state->controls.flags,NCF_SHOWFETCH)) {
Mitigate S3 test interference + Unlimited Dimensions in NCZarr This PR started as an attempt to add unlimited dimensions to NCZarr. It did that, but this exposed significant problems with test interference. So this PR is mostly about fixing -- well mitigating anyway -- test interference. The problem of test interference is now documented in the document docs/internal.md. The solutions implemented here are also describe in that document. The solution is somewhat fragile but multiple cleanup mechanisms are provided. Note that this feature requires that the AWS command line utility must be installed. ## Unlimited Dimensions. The existing NCZarr extensions to Zarr are modified to support unlimited dimensions. NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group". Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2. * Form 1: An integer representing the size of the dimension, which is used for simple named dimensions. * Form 2: A dictionary with the following keys and values" - "size" with an integer value representing the (current) size of the dimension. - "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension. For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases. That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension. This is the standard semantics for unlimited dimensions. Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following. * Did a partial refactor of the slice handling code in zwalk.c to clean it up. * Added a number of tests for unlimited dimensions derived from the same test in nc_test4. * Added several NCZarr specific unlimited tests; more are needed. * Add test of endianness. ## Misc. Other Changes * Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the AWS Transfer Utility mechanism. This is controlled by the ```#define TRANSFER```` command in that file. It defaults to being disabled. * Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE). * Fixed an obscure memory leak in ncdump. * Removed some obsolete unit testing code and test cases. * Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c. * Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4. * Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects. * Modify the semantics of zodom to properly handle stride > 1. * Add a truncate operation to the libnczarr zmap code.
2023-09-27 06:56:48 +08:00
nclog(NCLOGDEBUG,"fetch url=%s",fetchurl);
#ifdef HAVE_GETTIMEOFDAY
gettimeofday(&time0,NULL);
#endif
}
stat = NCD4_fetchurl(curl,fetchurl,packet,lastmodified,httpcodep);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
nullfree(fetchurl);
if(stat) goto fail;
if(FLAGSET(state->controls.flags,NCF_SHOWFETCH)) {
double secs = 0;
#ifdef HAVE_GETTIMEOFDAY
gettimeofday(&time1,NULL);
secs = deltatime(time0,time1);
#endif
Mitigate S3 test interference + Unlimited Dimensions in NCZarr This PR started as an attempt to add unlimited dimensions to NCZarr. It did that, but this exposed significant problems with test interference. So this PR is mostly about fixing -- well mitigating anyway -- test interference. The problem of test interference is now documented in the document docs/internal.md. The solutions implemented here are also describe in that document. The solution is somewhat fragile but multiple cleanup mechanisms are provided. Note that this feature requires that the AWS command line utility must be installed. ## Unlimited Dimensions. The existing NCZarr extensions to Zarr are modified to support unlimited dimensions. NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group". Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2. * Form 1: An integer representing the size of the dimension, which is used for simple named dimensions. * Form 2: A dictionary with the following keys and values" - "size" with an integer value representing the (current) size of the dimension. - "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension. For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases. That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension. This is the standard semantics for unlimited dimensions. Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following. * Did a partial refactor of the slice handling code in zwalk.c to clean it up. * Added a number of tests for unlimited dimensions derived from the same test in nc_test4. * Added several NCZarr specific unlimited tests; more are needed. * Add test of endianness. ## Misc. Other Changes * Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the AWS Transfer Utility mechanism. This is controlled by the ```#define TRANSFER```` command in that file. It defaults to being disabled. * Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE). * Fixed an obscure memory leak in ncdump. * Removed some obsolete unit testing code and test cases. * Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c. * Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4. * Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects. * Modify the semantics of zodom to properly handle stride > 1. * Add a truncate operation to the libnczarr zmap code.
2023-09-27 06:56:48 +08:00
nclog(NCLOGDEBUG,"fetch complete: %0.3f",secs);
}
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
}
#ifdef D4DEBUG
{
fprintf(stderr,"readpacket: packet.size=%lu\n",
(unsigned long)ncbyteslength(packet));
}
#endif
fail:
return THROW(stat);
}
#if 0
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int
readfromfile(NCD4INFO* state, const NCURI* uri, NCD4mode dxx, NCD4format fxx, d4size_t* sizep)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int stat = NC_NOERR;
size_t len;
ncbytesclear(state->curl->packet);
stat = readfile(state, uri, dxx, fxx, state->curl->packet);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#ifdef D4DEBUG
fprintf(stderr,"readfiletofile: packet.size=%lu\n",
(unsigned long)ncbyteslength(state->curl->packet));
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#endif
if(stat != NC_NOERR) goto unwind;
len = nclistlength(state->curl->packet);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if(sizep != NULL) *sizep = len;
unwind:
return THROW(stat);
}
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
static int
readfile(NCD4INFO* state, const NCURI* uri, NCD4mode dxx, NCD4format fxx, NCbytes* packet)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
{
int stat = NC_NOERR;
NCbytes* tmp = ncbytesnew();
char* filename = NULL;
char suffix[256];
#ifdef HAVE_GETTIMEOFDAY
struct timeval time0;
struct timeval time1;
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
suffix[0] = '\0';
strlcat(suffix,dxxextension(dxx),sizeof(suffix));
#if 0
not needed strlcat(suffix,dxxformat(fxx,dxx),sizeof(suffix));
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
ncbytescat(tmp,uri->path);
ncbytescat(tmp,suffix);
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
ncbytesnull(tmp);
filename = ncbytesextract(tmp);
ncbytesfree(tmp);
nullfree(state->fileproto.filename);
state->fileproto.filename = filename; /* filename is alloc'd here anyway */
if(FLAGSET(state->controls.flags,NCF_SHOWFETCH)) {
char* surl = NULL;
#ifdef HAVE_GETTIMEOFDAY
gettimeofday(&time0,NULL);
#endif
surl = ncuribuild((NCURI*)uri,NULL,NULL,NCURIALL);
Mitigate S3 test interference + Unlimited Dimensions in NCZarr This PR started as an attempt to add unlimited dimensions to NCZarr. It did that, but this exposed significant problems with test interference. So this PR is mostly about fixing -- well mitigating anyway -- test interference. The problem of test interference is now documented in the document docs/internal.md. The solutions implemented here are also describe in that document. The solution is somewhat fragile but multiple cleanup mechanisms are provided. Note that this feature requires that the AWS command line utility must be installed. ## Unlimited Dimensions. The existing NCZarr extensions to Zarr are modified to support unlimited dimensions. NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group". Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2. * Form 1: An integer representing the size of the dimension, which is used for simple named dimensions. * Form 2: A dictionary with the following keys and values" - "size" with an integer value representing the (current) size of the dimension. - "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension. For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases. That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension. This is the standard semantics for unlimited dimensions. Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following. * Did a partial refactor of the slice handling code in zwalk.c to clean it up. * Added a number of tests for unlimited dimensions derived from the same test in nc_test4. * Added several NCZarr specific unlimited tests; more are needed. * Add test of endianness. ## Misc. Other Changes * Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the AWS Transfer Utility mechanism. This is controlled by the ```#define TRANSFER```` command in that file. It defaults to being disabled. * Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE). * Fixed an obscure memory leak in ncdump. * Removed some obsolete unit testing code and test cases. * Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c. * Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4. * Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects. * Modify the semantics of zodom to properly handle stride > 1. * Add a truncate operation to the libnczarr zmap code.
2023-09-27 06:56:48 +08:00
nclog(NCLOGDEBUG,"fetch uri=%s file=%s",surl,filename);
}
switch (dxx) {
case NCD4_DMR:
if((stat = NC_readfile(filename,packet))) {
/* See if we can get the same thing from the .dap file */
stat = readfileDAPDMR(state,uri,packet);
}
break;
case NCD4_DAP:
case NCD4_DSR:
stat = NC_readfile(filename,packet);
break;
default: stat = NC_EDAP; break;
}
if(FLAGSET(state->controls.flags,NCF_SHOWFETCH)) {
double secs;
#ifdef HAVE_GETTIMEOFDAY
gettimeofday(&time1,NULL);
secs = deltatime(time0,time1);
#endif
Mitigate S3 test interference + Unlimited Dimensions in NCZarr This PR started as an attempt to add unlimited dimensions to NCZarr. It did that, but this exposed significant problems with test interference. So this PR is mostly about fixing -- well mitigating anyway -- test interference. The problem of test interference is now documented in the document docs/internal.md. The solutions implemented here are also describe in that document. The solution is somewhat fragile but multiple cleanup mechanisms are provided. Note that this feature requires that the AWS command line utility must be installed. ## Unlimited Dimensions. The existing NCZarr extensions to Zarr are modified to support unlimited dimensions. NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group". Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2. * Form 1: An integer representing the size of the dimension, which is used for simple named dimensions. * Form 2: A dictionary with the following keys and values" - "size" with an integer value representing the (current) size of the dimension. - "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension. For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases. That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension. This is the standard semantics for unlimited dimensions. Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following. * Did a partial refactor of the slice handling code in zwalk.c to clean it up. * Added a number of tests for unlimited dimensions derived from the same test in nc_test4. * Added several NCZarr specific unlimited tests; more are needed. * Add test of endianness. ## Misc. Other Changes * Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the AWS Transfer Utility mechanism. This is controlled by the ```#define TRANSFER```` command in that file. It defaults to being disabled. * Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE). * Fixed an obscure memory leak in ncdump. * Removed some obsolete unit testing code and test cases. * Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c. * Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4. * Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects. * Modify the semantics of zodom to properly handle stride > 1. * Add a truncate operation to the libnczarr zmap code.
2023-09-27 06:56:48 +08:00
nclog(NCLOGDEBUG,"%s fetch complete: %0.3f",suffix,secs);
}
return THROW(stat);
}
/* Extract the DMR from a DAP file */
static int
readfileDAPDMR(NCD4INFO* state, const NCURI* uri, NCbytes* packet)
{
int stat = NC_NOERR;
NCbytes* tmp = ncbytesnew();
char* filename = NULL;
NCD4HDR hdr;
#ifdef HAVE_GETTIMEOFDAY
struct timeval time0;
struct timeval time1;
#endif
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
ncbytescat(tmp,uri->path);
ncbytescat(tmp,".dap");
ncbytesnull(tmp);
filename = ncbytesextract(tmp);
ncbytesfree(tmp);
nullfree(state->fileproto.filename);
state->fileproto.filename = filename; /* filename is alloc'd here anyway */
if(FLAGSET(state->controls.flags,NCF_SHOWFETCH)) {
char* surl = NULL;
#ifdef HAVE_GETTIMEOFDAY
gettimeofday(&time0,NULL);
#endif
surl = ncuribuild((NCURI*)uri,NULL,".dap",NCURIALL);
Mitigate S3 test interference + Unlimited Dimensions in NCZarr This PR started as an attempt to add unlimited dimensions to NCZarr. It did that, but this exposed significant problems with test interference. So this PR is mostly about fixing -- well mitigating anyway -- test interference. The problem of test interference is now documented in the document docs/internal.md. The solutions implemented here are also describe in that document. The solution is somewhat fragile but multiple cleanup mechanisms are provided. Note that this feature requires that the AWS command line utility must be installed. ## Unlimited Dimensions. The existing NCZarr extensions to Zarr are modified to support unlimited dimensions. NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group". Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2. * Form 1: An integer representing the size of the dimension, which is used for simple named dimensions. * Form 2: A dictionary with the following keys and values" - "size" with an integer value representing the (current) size of the dimension. - "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension. For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases. That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension. This is the standard semantics for unlimited dimensions. Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following. * Did a partial refactor of the slice handling code in zwalk.c to clean it up. * Added a number of tests for unlimited dimensions derived from the same test in nc_test4. * Added several NCZarr specific unlimited tests; more are needed. * Add test of endianness. ## Misc. Other Changes * Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the AWS Transfer Utility mechanism. This is controlled by the ```#define TRANSFER```` command in that file. It defaults to being disabled. * Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE). * Fixed an obscure memory leak in ncdump. * Removed some obsolete unit testing code and test cases. * Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c. * Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4. * Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects. * Modify the semantics of zodom to properly handle stride > 1. * Add a truncate operation to the libnczarr zmap code.
2023-09-27 06:56:48 +08:00
nclog(NCLOGDEBUG,"fetch uri=%s file=%s",surl,filename);
}
stat = NC_readfile(filename,packet);
if(FLAGSET(state->controls.flags,NCF_SHOWFETCH)) {
double secs;
#ifdef HAVE_GETTIMEOFDAY
gettimeofday(&time1,NULL);
secs = deltatime(time0,time1);
#endif
Mitigate S3 test interference + Unlimited Dimensions in NCZarr This PR started as an attempt to add unlimited dimensions to NCZarr. It did that, but this exposed significant problems with test interference. So this PR is mostly about fixing -- well mitigating anyway -- test interference. The problem of test interference is now documented in the document docs/internal.md. The solutions implemented here are also describe in that document. The solution is somewhat fragile but multiple cleanup mechanisms are provided. Note that this feature requires that the AWS command line utility must be installed. ## Unlimited Dimensions. The existing NCZarr extensions to Zarr are modified to support unlimited dimensions. NCzarr extends the Zarr meta-data for the ".zgroup" object to include netcdf-4 model extensions. This information is stored in ".zgroup" as dictionary named "_nczarr_group". Inside "_nczarr_group", there is a key named "dims" that stores information about netcdf-4 named dimensions. The value of "dims" is a dictionary whose keys are the named dimensions. The value associated with each dimension name has one of two forms Form 1 is a special case of form 2, and is kept for backward compatibility. Whenever a new file is written, it uses format 1 if possible, otherwise format 2. * Form 1: An integer representing the size of the dimension, which is used for simple named dimensions. * Form 2: A dictionary with the following keys and values" - "size" with an integer value representing the (current) size of the dimension. - "unlimited" with a value of either "1" or "0" to indicate if this dimension is an unlimited dimension. For Unlimited dimensions, the size is initially zero, and as variables extend the length of that dimension, the size value for the dimension increases. That dimension size is shared by all arrays referencing that dimension, so if one array extends an unlimited dimension, it is implicitly extended for all other arrays that reference that dimension. This is the standard semantics for unlimited dimensions. Adding unlimited dimensions required a number of other changes to the NCZarr code-base. These included the following. * Did a partial refactor of the slice handling code in zwalk.c to clean it up. * Added a number of tests for unlimited dimensions derived from the same test in nc_test4. * Added several NCZarr specific unlimited tests; more are needed. * Add test of endianness. ## Misc. Other Changes * Modify libdispatch/ncs3sdk_aws.cpp to optionally support use of the AWS Transfer Utility mechanism. This is controlled by the ```#define TRANSFER```` command in that file. It defaults to being disabled. * Parameterize both the standard Unidata S3 bucket (S3TESTBUCKET) and the netcdf-c test data prefix (S3TESTSUBTREE). * Fixed an obscure memory leak in ncdump. * Removed some obsolete unit testing code and test cases. * Uncovered a bug in the netcdf-c handling of big-endian floats and doubles. Have not fixed yet. See tst_h5_endians.c. * Renamed some nczarr_tests testcases to avoid name conflicts with nc_test4. * Modify the semantics of zmap\#ncsmap_write to only allow total rewrite of objects. * Modify the semantics of zodom to properly handle stride > 1. * Add a truncate operation to the libnczarr zmap code.
2023-09-27 06:56:48 +08:00
nclog(NCLOGDEBUG,"fetch complete: %0.3f",secs);
}
if(stat != NC_NOERR) goto done;
/* Extract the DMR from the dap */
NCD4_getheader(ncbytescontents(packet),&hdr,NCD4_isLittleEndian());
if(hdr.count == 0 || (hdr.flags & NCD4_ERR_CHUNK))
return THROW(NC_EDMR);
/* patch up the packet */
{
int i;
size_t newlen;
for(i=0;i<4;i++)
ncbytesremove(packet,0); /* remove the hdr */
/* null terminate */
ncbytessetlength(packet,hdr.count-1);
ncbytesnull(packet);
/* Suppress nuls */
newlen = NCD4_elidenuls(ncbytescontents(packet),ncbyteslength(packet));
/* reset packet length */
ncbytessetlength(packet,newlen);
}
done:
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
return THROW(stat);
}
/* Extract packet as error message; assume httpcode set */
int
NCD4_seterrormessage(NCD4response* resp, size_t len, char* msg)
{
resp->error.message = (char*)d4alloc(len+1);
if(resp->error.message == NULL)
return THROW(NC_ENOMEM);
memcpy(resp->error.message,msg,len);
resp->error.message[len] = '\0';
return THROW(NC_ENODATA); /* slight lie */
}