netcdf-c/debug/cf.cmake

106 lines
2.0 KiB
CMake
Raw Normal View History

2017-04-15 01:05:30 +08:00
# Visual Studio
# Is netcdf-4 and/or DAP enabled?
NC4=1
DAP=1
#CDF5=1
2018-01-18 10:47:54 +08:00
#HDF4=1
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
export SETX=1
for arg in "$@" ; do
case "$arg" in
vs|VS) VS=1 ;;
linux|nix|l|x) unset VS ;;
nobuild|nb) NOBUILD=1 ;;
*) echo "Must specify env: vs|linux"; exit 1; ;;
esac
done
if test "x$VS" = x1 ; then
if test "x$2" = xsetup ; then
VSSETUP=1
else
unset VSSETUP
fi
fi
2017-08-30 01:06:29 +08:00
#TESTSERVERS="localhost:8080,149.165.169.123:8080"
2017-08-30 01:06:29 +08:00
#export NCPATHDEBUG=1
if test "x$VSSETUP" = x1 ; then
CFG="Debug"
else
CFG="Release"
fi
2017-04-15 01:05:30 +08:00
if test "x$VS" != x -a "x$INSTALL" != x ; then
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
FLAGS="-DCMAKE_PREFIX_PATH=c:/tools/nccmake"
2017-08-30 01:06:29 +08:00
fi
FLAGS="$FLAGS -DCMAKE_INSTALL_PREFIX=/tmp/netcdf"
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
if test "x$DAP" = x ; then
FLAGS="$FLAGS -DENABLE_DAP=false"
fi
if test "x$NC4" = x ; then
FLAGS="$FLAGS -DENABLE_NETCDF_4=false"
fi
if test "x$CDF5" != x ; then
FLAGS="$FLAGS -DENABLE_CDF5=true"
fi
if test "x$HDF4" != x ; then
FLAGS="$FLAGS -DENABLE_HDF4=true"
fi
if test "x$TESTSERVERS" != x ; then
FLAGS="$FLAGS -DREMOTETESTSERVERS=${TESTSERVERS}"
fi
# Enables
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
FLAGS="$FLAGS -DENABLE_DAP_REMOTE_TESTS=true"
FLAGS="$FLAGS -DENABLE_LOGGING=true"
#FLAGS="$FLAGS -DENABLE_DOXYGEN=true -DENABLE_INTERNAL_DOCS=true"
re e-support UBS-599337 re pull request https://github.com/Unidata/netcdf-c/pull/405 re pull request https://github.com/Unidata/netcdf-c/pull/446 Notes: 1. This branch is a cleanup of the magic.dmh branch. 2. magic.dmh was originally merged, but caused problems with parallel IO. It was re-issued as pull request https://github.com/Unidata/netcdf-c/pull/446. 3. This branch + pull request replace any previous pull requests and magic.dmh branch. Given an otherwise valid netCDF file that has a corrupted header, the netcdf library currently crashes. Instead, it should return NC_ENOTNC. Additionally, the NC_check_file_type code does not do the forward search required by hdf5 files. It currently only looks at file position 0 instead of 512, 1024, 2048,... Also, it turns out that the HDF4 magic number is assumed to always be at the beginning of the file (unlike HDF5). The change is localized to libdispatch/dfile.c See https://support.hdfgroup.org/release4/doc/DSpec_html/DS.pdf Also, it turns out that the code in NC_check_file_type is duplicated (mostly) in the function libsrc4/nc4file.c#nc_check_for_hdf. This branch does the following. 1. Make NC_check_file_type return NC_ENOTNC instead of crashing. 2. Remove nc_check_for_hdf and centralize all file format checking NC_check_file_type. 3. Add proper forward search for HDF5 files (but not HDF4 files) to look for the magic number at offsets of 0, 512, 1024... 4. Add test tst_hdf5_offset.sh. This tests that hdf5 files with an offset are properly recognized. It does so by prefixing a legal file with some number of zero bytes: 512, 1024, etc. 5. Off-topic: Added -N flag to ncdump to force a specific output dataset name.
2017-10-25 06:25:09 +08:00
#FLAGS="$FLAGS -DENABLE_LARGE_FILE_TESTS=true"
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
#FLAGS="$FLAGS -DENABLE_FILTER_TESTING=true"
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
# Disables
FLAGS="$FLAGS -DENABLE_EXAMPLES=false"
FLAGS="$FLAGS -DENABLE_CONVERSION_WARNINGS=false"
#FLAGS="$FLAGS -DENABLE_TESTS=false"
#FLAGS="$FLAGS -DENABLE_DISKLESS=false"
There was a request to extend the provenance information stored in the _NCProperties attribute to allow two things: 1. capture of additional library dependencies (over and above hdf5) 2. Recognition of non-netcdf libraries that create netcdf-4 format files. To this end, the _NCProperties format has been extended to be and arbitrary set of key=value pairs separated by commas. This new format has version = 2, and uses commas as the pair separator. Thus the general form is: _NCProperties = "version=2,key1=value,key2=value2..." ; This new version is accompanied by a new ./configure option of the form --with-ncproperties="key1=value1,key2=value2..." that specifies pairs to add to the _NCProperties attribute for all files created with that netcdf library. At this point, what is missing is some programmatic way to specify either all the pairs or additional pairs to the _NCProperties attribute. Not sure of the best way to do this. Builders using non-netcdf libraries can specify whatever they want in the key value pairs (as long as the version=2 is specified first). By convention, the primary library is expected to be the the first pair after the leading version=2 pair, but this is convention only and is neither required nor enforced. Related changes: 1. Fixed the tests that check _NCProperties to properly operate with version=2. 2. When reading a version 1 _NCProperties attribute, convert it to look like a version 2 attribute. 2. Added some version 2 tests to ncdump/tst_fileinfo.c and ncdump/tst_fileinfo.sh Misc Changes: 1. Fix minor problem in ncdap_test/testurl.sh where a parameter to buildurl needed to be quoted. 2. Minor fix to ncgen to swap switches -H and -h to be consistent with other utilities. 3. Document the -M flag in nccopy usage() and the nccopy man page. 4. Modify a test case to use the nccopy -M flag.
2018-08-26 11:44:41 +08:00
# Withs
FLAGS="$FLAGS -DNCPROPERTIES_EXTRA=\"key1=value1|key2=value2\""
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
rm -fr build
mkdir build
cd build
NCLIB=`pwd`
2017-04-15 01:05:30 +08:00
if test "x$VS" != x ; then
2017-04-15 01:05:30 +08:00
# Visual Studio
2017-08-29 08:11:24 +08:00
CFG="Release"
NCLIB="${NCLIB}/liblib"
2017-04-15 01:05:30 +08:00
export PATH="${NCLIB}:${PATH}"
#G=
cmake "$G" -DCMAKE_BUILD_TYPE=${CFG} $FLAGS ..
if test "x$NOBUILD" = x ; then
2017-04-15 01:05:30 +08:00
cmake --build . --config ${CFG}
cmake --build . --config ${CFG} --target RUN_TESTS
fi
2017-04-15 01:05:30 +08:00
else
# GCC
NCLIB="${NCLIB}/build/liblib"
#G="-GUnix Makefiles"
#T="--trace-expand"
cmake "${G}" $FLAGS ..
if test "x$NOBUILD" = x ; then
make all
make test
2017-04-15 01:05:30 +08:00
fi
fi
exit