netcdf-c/ncgen/ncgen.y

1597 lines
44 KiB
Plaintext
Raw Normal View History

2010-06-03 21:24:43 +08:00
/*********************************************************************
2018-12-07 06:40:43 +08:00
* Copyright 2018, UCAR/Unidata
2010-06-03 21:24:43 +08:00
* See netcdf/COPYRIGHT file for copying and redistribution conditions.
* $Id: ncgen.y,v 1.42 2010/05/18 21:32:46 dmh Exp $
*********************************************************************/
/* yacc source for "ncgen", a netCDL parser and netCDF generator */
2011-07-28 04:48:58 +08:00
%error-verbose
2010-06-03 21:24:43 +08:00
%{
/*
static char SccsId[] = "$Id: ncgen.y,v 1.42 2010/05/18 21:32:46 dmh Exp $";
*/
#include "includes.h"
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
#include "netcdf_aux.h"
2016-05-12 05:31:17 +08:00
#include "ncgeny.h"
#include "ncgen.h"
#ifdef USE_NETCDF4
#include "netcdf_filter.h"
#endif
2011-09-16 00:57:16 +08:00
2011-09-17 02:36:08 +08:00
/* Following are in ncdump (for now)*/
/* Need some (unused) definitions to get it to compile */
#define ncatt_t void*
#define ncvar_t void
#include "nctime.h"
2010-06-03 21:24:43 +08:00
/* parser controls */
#define YY_NO_INPUT 1
/* True if string a equals string b*/
#ifndef NCSTREQ
#define NCSTREQ(a, b) (*(a) == *(b) && strcmp((a), (b)) == 0)
Primary change: add dap4 support Specific changes: 1. Add dap4 code: libdap4 and dap4_test. Note that until the d4ts server problem is solved, dap4 is turned off. 2. Modify various files to support dap4 flags: configure.ac, Makefile.am, CMakeLists.txt, etc. 3. Add nc_test/test_common.sh. This centralizes the handling of the locations of various things in the build tree: e.g. where is ncgen.exe located. See nc_test/test_common.sh for details. 4. Modify .sh files to use test_common.sh 5. Obsolete separate oc2 by moving it to be part of netcdf-c. This means replacing code with netcdf-c equivalents. 5. Add --with-testserver to configure.ac to allow override of the servers to be used for --enable-dap-remote-tests. 6. There were multiple versions of nctypealignment code. Try to centralize in libdispatch/doffset.c and include/ncoffsets.h 7. Add a unit test for the ncuri code because of its complexity. 8. Move the findserver code out of libdispatch and into a separate, self contained program in ncdap_test and dap4_test. 9. Move the dispatch header files (nc{3,4}dispatch.h) to .../include because they are now shared by modules. 10. Revamp the handling of TOPSRCDIR and TOPBUILDDIR for shell scripts. 11. Make use of MREMAP if available 12. Misc. minor changes e.g. - #include <config.h> -> #include "config.h" - Add some no-install headers to /include - extern -> EXTERNL and vice versa as needed - misc header cleanup - clean up checking for misc. unix vs microsoft functions 13. Change copyright decls in some files to point to LICENSE file. 14. Add notes to RELEASENOTES.md
2017-03-09 08:01:10 +08:00
#endif
2010-06-03 21:24:43 +08:00
#define VLENSIZE (sizeof(nc_vlen_t))
#define MAXFLOATDIM 4294967295.0
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
/* mnemonics */
2010-06-03 21:24:43 +08:00
typedef enum Attrkind {ATTRVAR, ATTRGLOBAL, DONTKNOW} Attrkind;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
#define ISCONST 1
#define ISLIST 0
2010-06-03 21:24:43 +08:00
typedef nc_vlen_t vlen_t;
/* We retain the old representation of the symbol list
as a linked list.
*/
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
List* symlist;
2010-06-03 21:24:43 +08:00
/* Track rootgroup separately*/
Symbol* rootgroup;
/* Track the group sequence */
static List* groupstack;
/* Provide a separate sequence for accumulating values
during the parse.
*/
static List* stack;
/* track homogeneity of types for data lists*/
static nc_type consttype;
/* Misc. */
static int stackbase;
static int stacklen;
static int count;
static int opaqueid; /* counter for opaque constants*/
static int arrayuid; /* counter for pseudo-array types*/
char* primtypenames[PRIMNO] = {
"nat",
"byte", "char", "short",
"int", "float", "double",
"ubyte", "ushort", "uint",
"int64", "uint64",
"string"
};
static int GLOBAL_SPECIAL = _NCPROPS_FLAG
| _ISNETCDF4_FLAG
| _SUPERBLOCK_FLAG
| _FORMAT_FLAG ;
2010-06-03 21:24:43 +08:00
/*Defined in ncgen.l*/
extern int lineno; /* line number for error messages */
extern Bytebuffer* lextext; /* name or string with escapes removed */
2010-06-03 21:24:43 +08:00
extern double double_val; /* last double value read */
extern float float_val; /* last float value read */
extern long long int64_val; /* last int64 value read */
extern int int32_val; /* last int32 value read */
extern short int16_val; /* last short value read */
extern unsigned long long uint64_val; /* last int64 value read */
extern unsigned int uint32_val; /* last int32 value read */
extern unsigned short uint16_val; /* last short value read */
extern char char_val; /* last char value read */
extern signed char byte_val; /* last byte value read */
extern unsigned char ubyte_val; /* last byte value read */
/* Track definitions of dims, types, attributes, and vars*/
List* grpdefs;
List* dimdefs;
List* attdefs; /* variable-specific attributes*/
List* gattdefs; /* global attributes only*/
List* xattdefs; /* unknown attributes*/
List* typdefs;
List* vardefs;
List* tmp;
/* Forward */
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
static NCConstant* makeconstdata(nc_type);
static NCConstant* evaluate(Symbol* fcn, Datalist* arglist);
static NCConstant* makeenumconstref(Symbol*);
2010-06-03 21:24:43 +08:00
static void addtogroup(Symbol*);
static Symbol* currentgroup(void);
static Symbol* createrootgroup(const char*);
2010-06-03 21:24:43 +08:00
static Symbol* creategroup(Symbol*);
static int dupobjectcheck(nc_class,Symbol*);
static void setpathcurrent(Symbol* sym);
static Symbol* makeattribute(Symbol*,Symbol*,Symbol*,Datalist*,Attrkind);
static Symbol* makeprimitivetype(nc_type i);
static Symbol* makespecial(int tag, Symbol* vsym, Symbol* tsym, void* data, int isconst);
static int containsfills(Datalist* list);
static void vercheck(int ncid);
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
static long long extractint(NCConstant* con);
#ifdef USE_NETCDF4
static int parsefilterflag(const char* sdata0, Specialdata* special);
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
#ifdef GENDEBUG1
Mostly revert the filter code to reduce its complexity of use. re: https://github.com/Unidata/netcdf-c/issues/1836 Revert the internal filter code to simplify it. From the user's point of view, the only visible changes should be: 1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h 2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter. Internally,the dispatch table has been modified to get rid of the filter_actions entry and associated complex structures. It has been replaced with inq_var_filter_ids and inq_var_filter_info entries and the dispatch table version has been bumped to 3. Corresponding NOOP and NOTNC4 functions were added to libdispatch/dnotnc4.c. Also, the filter_action entries in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2, etc). This should only impact UDF users. In the process, it became clear that the form of the filters field in NC_VAR_INFO_T was format dependent, so I converted it to be of type void* and pushed its management into the various dispatch code bases. Specifically libhdf5 and libnczarr now manage the filters field in their own way. The auxilliary functions for parsing textual filter specifications were moved to netcdf_aux.h and were renamed to the following: * ncaux_h5filterspec_parse * ncaux_h5filterspec_parselist * ncaux_h5filterspec_free * ncaux_h5filter_fix8 Misc. Other Changes: 1. Document NUG/filters.md updated to reflect the changes above. 2. All the old data types (structs and enums) used by filter_actions actions were deleted. The exception is the NC_H5_Filterspec because it is needed by ncaux_h5filterspec_parselist. 3. Clientside filters were removed -- another enhancement for which no-one ever asked. 4. The ability to remove filters was itself removed. 5. Some functionality needed by nczarr was moved from libhdf5 to libsrc4 e.g. nc4_find_default_chunksizes 6. All the filterx code was removed 7. ncfilter.h and nc4filter.c no longer used Misc. Unrelated Changes: 1. The nczarr_test makefile clean was leaving some directories; so add clean-local to take care of them.
2020-09-28 02:43:46 +08:00
static void printfilters(int nfilters, NC_ParsedFilterSpec** filters);
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
#endif
#endif
2010-06-03 21:24:43 +08:00
int yylex(void);
#ifndef NO_STDARG
static void yyerror(const char *fmt, ...);
#else
static void yyerror(fmt,va_alist) const char* fmt; va_dcl;
#endif
/* Extern */
extern int lex_init(void);
%}
/* DECLARATIONS */
%union {
Symbol* sym;
unsigned long size; /* allow for zero size to indicate e.g. UNLIMITED*/
long mark; /* track indices into the sequence*/
int nctype; /* for tracking attribute list type*/
Datalist* datalist;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
NCConstant* constant;
2010-06-03 21:24:43 +08:00
}
%token <sym>
NC_UNLIMITED_K /* keyword for unbounded record dimension */
CHAR_K /* keyword for char datatype */
BYTE_K /* keyword for byte datatype */
SHORT_K /* keyword for short datatype */
INT_K /* keyword for int datatype */
FLOAT_K /* keyword for float datatype */
DOUBLE_K /* keyword for double datatype */
UBYTE_K /* keyword for unsigned byte datatype */
USHORT_K /* keyword for unsigned short datatype */
UINT_K /* keyword for unsigned int datatype */
INT64_K /* keyword for long long datatype */
UINT64_K /* keyword for unsigned long long datatype */
STRING_K /* keyword for string datatype */
2010-06-03 21:24:43 +08:00
IDENT /* name for a dimension, variable, or attribute */
TERMSTRING /* terminal string */
CHAR_CONST /* char constant (not ever generated by ncgen.l) */
BYTE_CONST /* byte constant */
SHORT_CONST /* short constant */
INT_CONST /* int constant */
INT64_CONST /* long long constant */
UBYTE_CONST /* unsigned byte constant */
USHORT_CONST /* unsigned short constant */
UINT_CONST /* unsigned int constant */
UINT64_CONST /* unsigned long long constant */
2010-06-03 21:24:43 +08:00
FLOAT_CONST /* float constant */
DOUBLE_CONST/* double constant */
2010-06-03 21:24:43 +08:00
DIMENSIONS /* keyword starting dimensions section, if any */
VARIABLES /* keyword starting variables section, if any */
NETCDF /* keyword declaring netcdf name */
DATA /* keyword starting data section, if any */
TYPES
COMPOUND
ENUM
OPAQUE_ /* 'OPAQUE' apparently conflicts with HDF4 code */
2010-06-03 21:24:43 +08:00
OPAQUESTRING /* 0x<even number of hexdigits> */
GROUP
PATH /* / or (/IDENT)+(.IDENT)? */
2010-06-03 21:24:43 +08:00
FILLMARKER /* "_" as opposed to the attribute */
NIL /* NIL */
2010-06-03 21:24:43 +08:00
_FILLVALUE
_FORMAT
_STORAGE
_CHUNKSIZES
_DEFLATELEVEL
_SHUFFLE
_ENDIANNESS
_NOFILL
_FLETCHER32
_NCPROPS
_ISNETCDF4
_SUPERBLOCK
_FILTER
DATASETID
2010-06-03 21:24:43 +08:00
2012-01-16 09:29:19 +08:00
%type <sym> ident typename primtype dimd varspec
2010-06-03 21:24:43 +08:00
attrdecl enumid path dimref fielddim fieldspec
%type <sym> typeref
%type <sym> varref
%type <sym> ambiguous_ref
2010-06-03 21:24:43 +08:00
%type <mark> enumidlist fieldlist fields varlist dimspec dimlist field
fielddimspec fielddimlist
%type <constant> dataitem constdata constint conststring constbool
%type <constant> simpleconstant function econstref
2011-09-16 00:57:16 +08:00
%type <datalist> datalist intlist datalist1 datalist0 arglist
2010-06-03 21:24:43 +08:00
%start ncdesc /* start symbol for grammar */
%%
/* RULES */
ncdesc: NETCDF
datasetid
2010-06-03 21:24:43 +08:00
rootgroup
{if (error_count > 0) YYABORT;}
2010-06-03 21:24:43 +08:00
;
datasetid: DATASETID {createrootgroup(datasetname);};
2010-06-03 21:24:43 +08:00
rootgroup: '{'
groupbody
subgrouplist
'}';
/* 2/3/08 - Allow group body with only attributes. (H/T John Storrs). */
groupbody:
attrdecllist
typesection /* Type definitions */
dimsection /* dimension declarations */
vasection /* variable and attribute declarations */
datasection /* data for variables within the group */
;
subgrouplist: /*empty*/ | subgrouplist namedgroup;
2012-01-16 09:29:19 +08:00
namedgroup: GROUP ident '{'
2010-06-03 21:24:43 +08:00
{
2010-08-26 03:01:07 +08:00
Symbol* id = $2;
markcdf4("Group specification");
if(creategroup(id) == NULL)
2010-06-03 21:24:43 +08:00
yyerror("duplicate group declaration within parent group for %s",
2010-08-26 03:01:07 +08:00
id->name);
2010-06-03 21:24:43 +08:00
}
groupbody
subgrouplist
{listpop(groupstack);}
'}'
attrdecllist
;
2010-06-03 21:24:43 +08:00
typesection: /* empty */
| TYPES {}
| TYPES typedecls
{markcdf4("Type specification");}
2010-06-03 21:24:43 +08:00
;
typedecls: type_or_attr_decl | typedecls type_or_attr_decl ;
2012-01-16 09:29:19 +08:00
typename: ident
2010-06-03 21:24:43 +08:00
{ /* Use when defining a type */
$1->objectclass = NC_TYPE;
if(dupobjectcheck(NC_TYPE,$1))
yyerror("duplicate type declaration for %s",
$1->name);
listpush(typdefs,(void*)$1);
2010-06-03 21:24:43 +08:00
}
;
type_or_attr_decl: typedecl {} | attrdecl ';' {} ;
typedecl:
enumdecl optsemicolon
| compounddecl optsemicolon
| vlendecl optsemicolon
| opaquedecl optsemicolon
;
optsemicolon: /*empty*/ | ';' ;
2010-06-03 21:24:43 +08:00
enumdecl: primtype ENUM typename
'{' enumidlist '}'
{
int i;
addtogroup($3); /* sets prefix*/
$3->objectclass=NC_TYPE;
$3->subclass=NC_ENUM;
$3->typ.basetype=$1;
$3->typ.size = $1->typ.size;
$3->typ.alignment = $1->typ.alignment;
stackbase=$5;
stacklen=listlength(stack);
$3->subnodes = listnew();
/* Variety of field fixups*/
/* 1. add in the enum values*/
/* 2. make this type be their container*/
/* 3. make constant names visible in the group*/
/* 4. set field basetype to be same as enum basetype*/
for(i=stackbase;i<stacklen;i++) {
Symbol* eid = (Symbol*)listget(stack,i);
assert(eid->subclass == NC_ECONST);
addtogroup(eid);
listpush($3->subnodes,(void*)eid);
2010-06-03 21:24:43 +08:00
eid->container = $3;
eid->typ.basetype = $3->typ.basetype;
}
2010-06-03 21:24:43 +08:00
listsetlength(stack,stackbase);/* remove stack nodes*/
}
;
enumidlist: enumid
{$$=listlength(stack); listpush(stack,(void*)$1);}
2010-06-03 21:24:43 +08:00
| enumidlist ',' enumid
{
int i;
$$=$1;
/* check for duplicates*/
stackbase=$1;
stacklen=listlength(stack);
for(i=stackbase;i<stacklen;i++) {
Symbol* elem = (Symbol*)listget(stack,i);
if(strcmp($3->name,elem->name)==0)
yyerror("duplicate enum declaration for %s",
elem->name);
}
listpush(stack,(void*)$3);
2010-06-03 21:24:43 +08:00
}
;
enumid: ident '=' constint
2010-06-03 21:24:43 +08:00
{
$1->objectclass=NC_TYPE;
$1->subclass=NC_ECONST;
$1->typ.econst=$3;
$$=$1;
}
;
opaquedecl: OPAQUE_ '(' INT_CONST ')' typename
2010-06-03 21:24:43 +08:00
{
vercheck(NC_OPAQUE);
2010-06-03 21:24:43 +08:00
addtogroup($5); /*sets prefix*/
$5->objectclass=NC_TYPE;
$5->subclass=NC_OPAQUE;
$5->typ.typecode=NC_OPAQUE;
$5->typ.size=int32_val;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
$5->typ.alignment=ncaux_class_alignment(NC_OPAQUE);
2010-06-03 21:24:43 +08:00
}
;
vlendecl: typeref '(' '*' ')' typename
{
Symbol* basetype = $1;
vercheck(NC_VLEN);
2010-06-03 21:24:43 +08:00
addtogroup($5); /*sets prefix*/
$5->objectclass=NC_TYPE;
$5->subclass=NC_VLEN;
$5->typ.basetype=basetype;
$5->typ.typecode=NC_VLEN;
$5->typ.size=VLENSIZE;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
$5->typ.alignment=ncaux_class_alignment(NC_VLEN);
2010-06-03 21:24:43 +08:00
}
;
compounddecl: COMPOUND typename '{' fields '}'
{
int i,j;
vercheck(NC_COMPOUND);
2010-06-03 21:24:43 +08:00
addtogroup($2);
/* check for duplicate field names*/
stackbase=$4;
stacklen=listlength(stack);
for(i=stackbase;i<stacklen;i++) {
Symbol* elem1 = (Symbol*)listget(stack,i);
for(j=i+1;j<stacklen;j++) {
Symbol* elem2 = (Symbol*)listget(stack,j);
if(strcmp(elem1->name,elem2->name)==0) {
yyerror("duplicate field declaration for %s",elem1->name);
}
}
}
$2->objectclass=NC_TYPE;
$2->subclass=NC_COMPOUND;
$2->typ.basetype=NULL;
$2->typ.typecode=NC_COMPOUND;
$2->subnodes = listnew();
/* Add in the fields*/
for(i=stackbase;i<stacklen;i++) {
Symbol* fsym = (Symbol*)listget(stack,i);
fsym->container = $2;
listpush($2->subnodes,(void*)fsym);
}
2010-06-03 21:24:43 +08:00
listsetlength(stack,stackbase);/* remove stack nodes*/
}
;
fields: field ';' {$$=$1;}
| fields field ';' {$$=$1;}
;
field: typeref fieldlist
{
int i;
$$=$2;
stackbase=$2;
stacklen=listlength(stack);
/* process each field in the fieldlist*/
for(i=stackbase;i<stacklen;i++) {
Symbol* f = (Symbol*)listget(stack,i);
f->typ.basetype = $1;
}
}
;
primtype: CHAR_K { $$ = primsymbols[NC_CHAR]; }
| BYTE_K { $$ = primsymbols[NC_BYTE]; }
| SHORT_K { $$ = primsymbols[NC_SHORT]; }
| INT_K { $$ = primsymbols[NC_INT]; }
| FLOAT_K { $$ = primsymbols[NC_FLOAT]; }
| DOUBLE_K{ $$ = primsymbols[NC_DOUBLE]; }
| UBYTE_K { vercheck(NC_UBYTE); $$ = primsymbols[NC_UBYTE]; }
| USHORT_K { vercheck(NC_USHORT); $$ = primsymbols[NC_USHORT]; }
| UINT_K { vercheck(NC_UINT); $$ = primsymbols[NC_UINT]; }
| INT64_K { vercheck(NC_INT64); $$ = primsymbols[NC_INT64]; }
| UINT64_K { vercheck(NC_UINT64); $$ = primsymbols[NC_UINT64]; }
| STRING_K { vercheck(NC_STRING); $$ = primsymbols[NC_STRING]; }
2010-06-03 21:24:43 +08:00
;
dimsection: /* empty */
| DIMENSIONS {}
| DIMENSIONS dimdecls {}
;
dimdecls: dim_or_attr_decl ';'
| dimdecls dim_or_attr_decl ';'
;
dim_or_attr_decl: dimdeclist {} | attrdecl {} ;
dimdeclist: dimdecl
| dimdeclist ',' dimdecl
;
dimdecl:
dimd '=' constint
2010-06-03 21:24:43 +08:00
{
$1->dim.declsize = (size_t)extractint($3);
2013-11-15 06:13:20 +08:00
#ifdef GENDEBUG1
fprintf(stderr,"dimension: %s = %llu\n",$1->name,(unsigned long long)$1->dim.declsize);
#endif
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
reclaimconstant($3);
2010-06-03 21:24:43 +08:00
}
| dimd '=' NC_UNLIMITED_K
{
$1->dim.declsize = NC_UNLIMITED;
$1->dim.isunlimited = 1;
2013-11-15 06:13:20 +08:00
#ifdef GENDEBUG1
fprintf(stderr,"dimension: %s = UNLIMITED\n",$1->name);
#endif
2010-06-03 21:24:43 +08:00
}
;
2012-01-16 09:29:19 +08:00
dimd: ident
{
2010-06-03 21:24:43 +08:00
$1->objectclass=NC_DIM;
if(dupobjectcheck(NC_DIM,$1))
yyerror( "Duplicate dimension declaration for %s",
$1->name);
addtogroup($1);
$$=$1;
listpush(dimdefs,(void*)$1);
2010-06-03 21:24:43 +08:00
}
;
vasection: /* empty */
| VARIABLES {}
| VARIABLES vadecls {}
;
vadecls: vadecl_or_attr ';'
| vadecls vadecl_or_attr ';'
;
vadecl_or_attr: vardecl {} | attrdecl {} ;
vardecl: typeref varlist
{
int i;
stackbase=$2;
stacklen=listlength(stack);
/* process each variable in the varlist*/
for(i=stackbase;i<stacklen;i++) {
Symbol* sym = (Symbol*)listget(stack,i);
sym->objectclass = NC_VAR;
if(dupobjectcheck(NC_VAR,sym)) {
yyerror("Duplicate variable declaration for %s",
sym->name);
} else {
sym->typ.basetype = $1;
addtogroup(sym);
listpush(vardefs,(void*)sym);
2010-06-03 21:24:43 +08:00
}
}
listsetlength(stack,stackbase);/* remove stack nodes*/
}
;
varlist: varspec
{$$=listlength(stack);
listpush(stack,(void*)$1);
2010-06-03 21:24:43 +08:00
}
| varlist ',' varspec
{$$=$1; listpush(stack,(void*)$3);}
2010-06-03 21:24:43 +08:00
;
2012-01-16 09:29:19 +08:00
varspec: ident dimspec
2010-06-03 21:24:43 +08:00
{
int i;
Dimset dimset;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
Symbol* var = $1; /* for debugging */
2010-06-03 21:24:43 +08:00
stacklen=listlength(stack);
stackbase=$2;
count = stacklen - stackbase;
if(count >= NC_MAX_VAR_DIMS) {
yyerror("%s has too many dimensions",$1->name);
count = NC_MAX_VAR_DIMS - 1;
stacklen = stackbase + count;
}
dimset.ndims = count;
/* extract the actual dimensions*/
if(dimset.ndims > 0) {
for(i=0;i<count;i++) {
Symbol* dsym = (Symbol*)listget(stack,stackbase+i);
dimset.dimsyms[i] = dsym;
}
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
var->typ.dimset = dimset;
2010-06-03 21:24:43 +08:00
}
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
var->typ.basetype = NULL; /* not yet known*/
var->objectclass=NC_VAR;
2010-06-03 21:24:43 +08:00
listsetlength(stack,stackbase);/* remove stack nodes*/
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
$$ = var;
2010-06-03 21:24:43 +08:00
}
;
dimspec: /* empty */ {$$=listlength(stack);}
| '(' dimlist ')' {$$=$2;}
;
dimlist: dimref {$$=listlength(stack); listpush(stack,(void*)$1);}
2010-06-03 21:24:43 +08:00
| dimlist ',' dimref
{$$=$1; listpush(stack,(void*)$3);}
2010-06-03 21:24:43 +08:00
;
dimref: path
{Symbol* dimsym = $1;
dimsym->objectclass = NC_DIM;
/* Find the actual dimension*/
dimsym = locate(dimsym);
if(dimsym == NULL) {
derror("Undefined or forward referenced dimension: %s",$1->name);
YYABORT;
}
$$=dimsym;
}
;
fieldlist:
fieldspec
{$$=listlength(stack);
listpush(stack,(void*)$1);
2010-06-03 21:24:43 +08:00
}
| fieldlist ',' fieldspec
{$$=$1; listpush(stack,(void*)$3);}
2010-06-03 21:24:43 +08:00
;
fieldspec:
2012-01-16 09:29:19 +08:00
ident fielddimspec
2010-06-03 21:24:43 +08:00
{
int i;
Dimset dimset;
stackbase=$2;
stacklen=listlength(stack);
count = stacklen - stackbase;
if(count >= NC_MAX_VAR_DIMS) {
yyerror("%s has too many dimensions",$1->name);
count = NC_MAX_VAR_DIMS - 1;
stacklen = stackbase + count;
}
dimset.ndims = count;
if(count > 0) {
/* extract the actual dimensions*/
for(i=0;i<count;i++) {
Symbol* dsym = (Symbol*)listget(stack,stackbase+i);
dimset.dimsyms[i] = dsym;
}
$1->typ.dimset = dimset;
}
$1->typ.basetype = NULL; /* not yet known*/
$1->objectclass=NC_TYPE;
$1->subclass=NC_FIELD;
listsetlength(stack,stackbase);/* remove stack nodes*/
$$ = $1;
}
;
fielddimspec: /* empty */ {$$=listlength(stack);}
| '(' fielddimlist ')' {$$=$2;}
;
fielddimlist:
fielddim {$$=listlength(stack); listpush(stack,(void*)$1);}
2010-06-03 21:24:43 +08:00
| fielddimlist ',' fielddim
{$$=$1; listpush(stack,(void*)$3);}
2010-06-03 21:24:43 +08:00
;
fielddim:
UINT_CONST
{ /* Anonymous integer dimension.
Can only occur in type definitions*/
char anon[32];
sprintf(anon,"const%u",uint32_val);
$$ = install(anon);
$$->objectclass = NC_DIM;
$$->dim.isconstant = 1;
$$->dim.declsize = uint32_val;
}
| INT_CONST
{ /* Anonymous integer dimension.
Can only occur in type definitions*/
char anon[32];
if(int32_val <= 0) {
derror("field dimension must be positive");
YYABORT;
}
sprintf(anon,"const%d",int32_val);
$$ = install(anon);
$$->objectclass = NC_DIM;
$$->dim.isconstant = 1;
$$->dim.declsize = int32_val;
}
;
/* Use this when referencing defined objects */
varref:
ambiguous_ref
2010-06-03 21:24:43 +08:00
{Symbol* vsym = $1;
if(vsym->objectclass != NC_VAR) {
derror("Undefined or forward referenced variable: %s",vsym->name);
YYABORT;
}
$$=vsym;
}
;
typeref:
ambiguous_ref
2010-06-03 21:24:43 +08:00
{Symbol* tsym = $1;
if(tsym->objectclass != NC_TYPE) {
derror("Undefined or forward referenced type: %s",tsym->name);
YYABORT;
}
$$=tsym;
}
;
ambiguous_ref:
path
2010-06-03 21:24:43 +08:00
{Symbol* tvsym = $1; Symbol* sym;
/* disambiguate*/
tvsym->objectclass = NC_VAR;
sym = locate(tvsym);
if(sym == NULL) {
tvsym->objectclass = NC_TYPE;
sym = locate(tvsym);
if(tvsym == NULL) {
derror("Undefined or forward referenced name: %s",$1->name);
YYABORT;
} else tvsym = sym;
} else tvsym = sym;
if(tvsym == NULL) {
derror("Undefined name (line %d): %s",$1->lineno,$1->name);
2010-06-03 21:24:43 +08:00
YYABORT;
}
$$=tvsym;
}
| primtype {$$=$1;}
;
/* Use this for all attribute decls */
/* Global vs var-specific will be separated in makeattribute */
/* Watch out; this is left recursive */
attrdecllist: /*empty*/ {} | attrdecl ';' attrdecllist {} ;
attrdecl:
':' _NCPROPS '=' conststring
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_NCPROPS_FLAG,NULL,NULL,(void*)$4,ISCONST);}
| ':' _ISNETCDF4 '=' constbool
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_ISNETCDF4_FLAG,NULL,NULL,(void*)$4,ISCONST);}
| ':' _SUPERBLOCK '=' constint
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_SUPERBLOCK_FLAG,NULL,NULL,(void*)$4,ISCONST);}
| ':' ident '=' datalist
{ $$=makeattribute($2,NULL,NULL,$4,ATTRGLOBAL);}
| typeref ambiguous_ref ':' ident '=' datalist
2010-06-03 21:24:43 +08:00
{Symbol* tsym = $1; Symbol* vsym = $2; Symbol* asym = $4;
if(vsym->objectclass == NC_VAR) {
$$=makeattribute(asym,vsym,tsym,$6,ATTRVAR);
} else {
derror("Doubly typed attribute: %s",asym->name);
YYABORT;
}
}
| ambiguous_ref ':' ident '=' datalist
2010-06-03 21:24:43 +08:00
{Symbol* sym = $1; Symbol* asym = $3;
if(sym->objectclass == NC_VAR) {
$$=makeattribute(asym,sym,NULL,$5,ATTRVAR);
} else if(sym->objectclass == NC_TYPE) {
$$=makeattribute(asym,NULL,sym,$5,ATTRGLOBAL);
} else {
derror("Attribute prefix not a variable or type: %s",asym->name);
YYABORT;
}
}
| ambiguous_ref ':' _FILLVALUE '=' datalist
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_FILLVALUE_FLAG,$1,NULL,(void*)$5,ISLIST);}
| typeref ambiguous_ref ':' _FILLVALUE '=' datalist
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_FILLVALUE_FLAG,$2,$1,(void*)$6,ISLIST);}
| ambiguous_ref ':' _STORAGE '=' conststring
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_STORAGE_FLAG,$1,NULL,(void*)$5,ISCONST);}
| ambiguous_ref ':' _CHUNKSIZES '=' intlist
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_CHUNKSIZES_FLAG,$1,NULL,(void*)$5,ISLIST);}
| ambiguous_ref ':' _FLETCHER32 '=' constbool
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_FLETCHER32_FLAG,$1,NULL,(void*)$5,ISCONST);}
| ambiguous_ref ':' _DEFLATELEVEL '=' constint
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_DEFLATE_FLAG,$1,NULL,(void*)$5,ISCONST);}
| ambiguous_ref ':' _SHUFFLE '=' constbool
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_SHUFFLE_FLAG,$1,NULL,(void*)$5,ISCONST);}
| ambiguous_ref ':' _ENDIANNESS '=' conststring
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_ENDIAN_FLAG,$1,NULL,(void*)$5,ISCONST);}
| ambiguous_ref ':' _FILTER '=' conststring
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_FILTER_FLAG,$1,NULL,(void*)$5,ISCONST);}
| ambiguous_ref ':' _NOFILL '=' constbool
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_NOFILL_FLAG,$1,NULL,(void*)$5,ISCONST);}
2010-06-03 21:24:43 +08:00
| ':' _FORMAT '=' conststring
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = makespecial(_FORMAT_FLAG,NULL,NULL,(void*)$4,ISCONST);}
2010-06-03 21:24:43 +08:00
;
path:
2012-01-16 09:29:19 +08:00
ident
2010-06-03 21:24:43 +08:00
{
$$=$1;
$1->ref.is_ref=1;
$1->is_prefixed=0;
2010-06-03 21:24:43 +08:00
setpathcurrent($1);
}
| PATH
{
$$=$1;
$1->ref.is_ref=1;
2010-06-03 21:24:43 +08:00
$1->is_prefixed=1;
/* path is set in ncgen.l*/
}
;
datasection: /* empty */
| DATA {}
| DATA datadecls {}
;
datadecls: datadecl ';'
| datadecls datadecl ';'
;
datadecl: varref '=' datalist
{$1->data = $3;}
;
datalist:
datalist0 {$$ = $1;}
| datalist1 {$$ = $1;}
;
datalist0:
2012-03-08 07:38:51 +08:00
/*empty*/ {$$ = builddatalist(0);}
2010-06-03 21:24:43 +08:00
;
datalist1: /* Must have at least 1 element */
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
dataitem {$$ = const2list($1);}
2010-06-03 21:24:43 +08:00
| datalist ',' dataitem
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{dlappend($1,($3)); $$=$1; }
2010-06-03 21:24:43 +08:00
;
dataitem:
constdata {$$=$1;}
| '{' datalist '}' {$$=builddatasublist($2);}
;
constdata:
2011-09-16 00:57:16 +08:00
simpleconstant {$$=$1;}
| OPAQUESTRING {$$=makeconstdata(NC_OPAQUE);}
| FILLMARKER {$$=makeconstdata(NC_FILLVALUE);}
| NIL {$$=makeconstdata(NC_NIL);}
| econstref {$$=$1;}
2011-09-16 00:57:16 +08:00
| function
;
econstref:
path {$$ = makeenumconstref($1);}
;
2011-09-16 00:57:16 +08:00
function:
2012-01-16 09:29:19 +08:00
ident '(' arglist ')' {$$=evaluate($1,$3);}
2011-09-16 00:57:16 +08:00
;
arglist:
simpleconstant
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{$$ = const2list($1);}
2011-09-16 00:57:16 +08:00
| arglist ',' simpleconstant
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
{dlappend($1,($3)); $$=$1;}
2011-09-16 00:57:16 +08:00
;
simpleconstant:
2010-06-03 21:24:43 +08:00
CHAR_CONST {$$=makeconstdata(NC_CHAR);} /* never used apparently*/
| BYTE_CONST {$$=makeconstdata(NC_BYTE);}
| SHORT_CONST {$$=makeconstdata(NC_SHORT);}
| INT_CONST {$$=makeconstdata(NC_INT);}
| INT64_CONST {$$=makeconstdata(NC_INT64);}
| UBYTE_CONST {$$=makeconstdata(NC_UBYTE);}
| USHORT_CONST {$$=makeconstdata(NC_USHORT);}
| UINT_CONST {$$=makeconstdata(NC_UINT);}
| UINT64_CONST {$$=makeconstdata(NC_UINT64);}
| FLOAT_CONST {$$=makeconstdata(NC_FLOAT);}
| DOUBLE_CONST {$$=makeconstdata(NC_DOUBLE);}
| TERMSTRING {$$=makeconstdata(NC_STRING);}
;
intlist:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
constint {$$ = const2list($1);}
| intlist ',' constint {$$=$1; dlappend($1,($3));}
2010-06-03 21:24:43 +08:00
;
constint:
INT_CONST
{$$=makeconstdata(NC_INT);}
| UINT_CONST
{$$=makeconstdata(NC_UINT);}
| INT64_CONST
{$$=makeconstdata(NC_INT64);}
| UINT64_CONST
{$$=makeconstdata(NC_UINT64);}
;
conststring:
TERMSTRING {$$=makeconstdata(NC_STRING);}
;
constbool:
conststring {$$=$1;}
| constint {$$=$1;}
/* End OF RULES */
2012-01-16 09:29:19 +08:00
/* Push all idents thru here*/
ident:
IDENT {$$=$1;}
;
2010-06-03 21:24:43 +08:00
%%
#ifndef NO_STDARG
static void
yyerror(const char *fmt, ...)
#else
static void
yyerror(fmt,va_alist) const char* fmt; va_dcl
#endif
{
va_list argv;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
va_start(argv,fmt);
2010-06-03 21:24:43 +08:00
(void)fprintf(stderr,"%s: %s line %d: ", progname, cdlname, lineno);
vderror(fmt,argv);
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
va_end(argv);
2010-06-03 21:24:43 +08:00
}
/* undefine yywrap macro, in case we are using bison instead of yacc */
#ifdef yywrap
#undef yywrap
#endif
static int
ncgwrap(void) /* returns 1 on EOF if no more input */
{
return 1;
}
/* get lexical input routine generated by lex */
2015-11-20 04:44:07 +08:00
#include "ncgenl.c"
2010-06-03 21:24:43 +08:00
/* Really should init our data within this file */
void
parse_init(void)
{
int i;
opaqueid = 0;
arrayuid = 0;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
symlist = listnew();
2010-06-03 21:24:43 +08:00
stack = listnew();
groupstack = listnew();
consttype = NC_NAT;
grpdefs = listnew();
dimdefs = listnew();
attdefs = listnew();
gattdefs = listnew();
xattdefs = listnew();
typdefs = listnew();
vardefs = listnew();
tmp = listnew();
/* Create the primitive types */
for(i=NC_NAT+1;i<=NC_STRING;i++) {
primsymbols[i] = makeprimitivetype(i);
}
lex_init();
}
static Symbol*
makeprimitivetype(nc_type nctype)
{
Symbol* sym = install(primtypenames[nctype]);
sym->objectclass=NC_TYPE;
sym->subclass=NC_PRIM;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
sym->nc_id = nctype;
2010-06-03 21:24:43 +08:00
sym->typ.typecode = nctype;
sym->typ.size = ncsize(nctype);
sym->typ.nelems = 1;
2018-12-07 06:40:43 +08:00
sym->typ.alignment = ncaux_class_alignment(nctype);
/* Make the basetype circular so we can always ask for it */
sym->typ.basetype = sym;
2010-06-03 21:24:43 +08:00
sym->prefix = listnew();
return sym;
}
/* Symbol table operations for ncgen tool */
/* install sname in symbol table even if it is already there */
Symbol*
install(const char *sname)
{
Symbol* sp;
2017-10-31 05:52:08 +08:00
sp = (Symbol*) ecalloc (sizeof (struct Symbol));
2010-06-03 21:24:43 +08:00
sp->name = nulldup(sname);
sp->lineno = lineno;
sp->location = currentgroup();
sp->container = currentgroup();
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
sp->var.special._Storage = NC_CONTIGUOUS;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
listpush(symlist,sp);
2010-06-03 21:24:43 +08:00
return sp;
}
static Symbol*
currentgroup(void)
{
if(listlength(groupstack) == 0) return rootgroup;
return (Symbol*)listtop(groupstack);
}
static Symbol*
createrootgroup(const char* dataset)
2010-06-03 21:24:43 +08:00
{
Symbol* gsym = install(dataset);
2010-06-03 21:24:43 +08:00
gsym->objectclass = NC_GRP;
gsym->container = NULL;
gsym->subnodes = listnew();
gsym->grp.is_root = 1;
gsym->prefix = listnew();
listpush(grpdefs,(void*)gsym);
2010-06-03 21:24:43 +08:00
rootgroup = gsym;
return gsym;
}
static Symbol*
creategroup(Symbol * gsym)
{
/* See if this group already exists in currentgroup */
gsym->objectclass = NC_GRP;
if(dupobjectcheck(NC_GRP,gsym)) {
derror("Duplicate group name in same scope: %s",gsym->name);
return NULL;
}
addtogroup(gsym);
gsym->subnodes = listnew();
listpush(groupstack,(void*)gsym);
listpush(grpdefs,(void*)gsym);
2010-06-03 21:24:43 +08:00
return gsym;
}
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
static NCConstant*
2010-06-03 21:24:43 +08:00
makeconstdata(nc_type nctype)
{
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
NCConstant* con = nullconst();
2010-06-03 21:24:43 +08:00
consttype = nctype;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->nctype = nctype;
con->lineno = lineno;
con->filled = 0;
2010-06-03 21:24:43 +08:00
switch (nctype) {
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
case NC_CHAR: con->value.charv = char_val; break;
case NC_BYTE: con->value.int8v = byte_val; break;
case NC_SHORT: con->value.int16v = int16_val; break;
case NC_INT: con->value.int32v = int32_val; break;
case NC_FLOAT:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->value.floatv = float_val;
break;
case NC_DOUBLE:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->value.doublev = double_val;
break;
2010-06-03 21:24:43 +08:00
case NC_STRING: { /* convert to a set of chars*/
2012-03-08 07:38:51 +08:00
size_t len;
len = bbLength(lextext);
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->value.stringv.len = len;
con->value.stringv.stringv = bbExtract(lextext);
2010-06-03 21:24:43 +08:00
}
break;
/* Allow these constants even in netcdf-3 */
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
case NC_UBYTE: con->value.uint8v = ubyte_val; break;
case NC_USHORT: con->value.uint16v = uint16_val; break;
case NC_UINT: con->value.uint32v = uint32_val; break;
case NC_INT64: con->value.int64v = int64_val; break;
case NC_UINT64: con->value.uint64v = uint64_val; break;
2010-06-03 21:24:43 +08:00
#ifdef USE_NETCDF4
case NC_OPAQUE: {
char* s;
2012-05-06 06:31:24 +08:00
int len;
len = bbLength(lextext);
2017-10-31 05:52:08 +08:00
s = (char*)ecalloc(len+1);
strncpy(s,bbContents(lextext),len);
2012-05-06 06:31:24 +08:00
s[len] = '\0';
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->value.opaquev.stringv = s;
con->value.opaquev.len = len;
2010-06-03 21:24:43 +08:00
} break;
case NC_NIL:
break; /* no associated value*/
2010-06-03 21:24:43 +08:00
#endif
2017-11-01 04:03:57 +08:00
case NC_FILLVALUE:
2010-06-03 21:24:43 +08:00
break; /* no associated value*/
2010-06-03 21:24:43 +08:00
default:
yyerror("Data constant: unexpected NC type: %s",
nctypename(nctype));
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->value.stringv.stringv = NULL;
con->value.stringv.len = 0;
2010-06-03 21:24:43 +08:00
}
return con;
}
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
static NCConstant*
makeenumconstref(Symbol* refsym)
2010-06-03 21:24:43 +08:00
{
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
NCConstant* con = nullconst();
markcdf4("Enum type");
2010-06-03 21:24:43 +08:00
consttype = NC_ENUM;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->nctype = NC_ECONST;
con->lineno = lineno;
con->filled = 0;
refsym->objectclass = NC_TYPE;
refsym->subclass = NC_ECONST;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
con->value.enumv = refsym;
2010-06-03 21:24:43 +08:00
return con;
}
static void
addtogroup(Symbol* sym)
{
Symbol* grp = currentgroup();
sym->container = grp;
listpush(grp->subnodes,(void*)sym);
2010-06-03 21:24:43 +08:00
setpathcurrent(sym);
}
/* Check for duplicate name of given type within current group*/
static int
dupobjectcheck(nc_class objectclass, Symbol* pattern)
{
int i;
Symbol* grp;
if(pattern == NULL) return 0;
grp = pattern->container;
if(grp == NULL || grp->subnodes == NULL) return 0;
for(i=0;i<listlength(grp->subnodes);i++) {
Symbol* sym = (Symbol*)listget(grp->subnodes,i);
if(!sym->ref.is_ref && sym->objectclass == objectclass
2010-06-03 21:24:43 +08:00
&& strcmp(sym->name,pattern->name)==0) return 1;
}
return 0;
}
static void
setpathcurrent(Symbol* sym)
{
sym->is_prefixed = 0;
sym->prefix = prefixdup(groupstack);
}
/* Convert an nc_type code to the corresponding Symbol*/
Symbol*
basetypefor(nc_type nctype)
{
return primsymbols[nctype];
}
static int
truefalse(NCConstant* con, int tag)
2010-06-03 21:24:43 +08:00
{
if(con->nctype == NC_STRING) {
char* sdata = con->value.stringv.stringv;
if(strncmp(sdata,"false",NC_MAX_NAME) == 0
|| strncmp(sdata,"0",NC_MAX_NAME) == 0)
return 0;
else if(strncmp(sdata,"true",NC_MAX_NAME) == 0
|| strncmp(sdata,"1",NC_MAX_NAME) == 0)
return 1;
else goto fail;
} else if(con->value.int32v < 0 || con->value.int32v > 1)
goto fail;
return con->value.int32v;
fail:
derror("%s: illegal value",specialname(tag));
return 0;
}
/* Since this may be affected by the _Format attribute, which
may come last, capture all the special info and sort it out
in semantics.
*/
static Symbol*
makespecial(int tag, Symbol* vsym, Symbol* tsym, void* data, int isconst)
{
Symbol* attr = NULL;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
Datalist* list = NULL;
NCConstant* con = NULL;
NCConstant* tmp = NULL;
2010-06-03 21:24:43 +08:00
int tf = 0;
char* sdata = NULL;
int idata = -1;
if((GLOBAL_SPECIAL & tag) != 0) {
if(vsym != NULL) {
derror("_Format: must be global attribute");
vsym = NULL;
}
} else {
if(vsym == NULL) {
derror("%s: must have non-NULL vsym", specialname(tag));
return NULL;
}
}
if(tag != _FILLVALUE_FLAG && tag != _FORMAT_FLAG)
/*Main.*/specials_flag++;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
if(isconst)
con = (NCConstant*)data;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
else
2010-06-03 21:24:43 +08:00
list = (Datalist*)data;
switch (tag) {
case _FLETCHER32_FLAG:
case _SHUFFLE_FLAG:
case _ISNETCDF4_FLAG:
2010-06-03 21:24:43 +08:00
case _NOFILL_FLAG:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
tmp = nullconst();
tmp->nctype = (con->nctype == NC_STRING?NC_STRING:NC_INT);
convert1(con,tmp);
tf = truefalse(tmp,tag);
reclaimconstant(tmp);
2010-06-03 21:24:43 +08:00
break;
case _FORMAT_FLAG:
case _STORAGE_FLAG:
case _NCPROPS_FLAG:
2010-06-03 21:24:43 +08:00
case _ENDIAN_FLAG:
case _FILTER_FLAG:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
tmp = nullconst();
tmp->nctype = NC_STRING;
convert1(con,tmp);
if(tmp->nctype == NC_STRING) {
sdata = tmp->value.stringv.stringv;
tmp->value.stringv.stringv = NULL;
tmp->value.stringv.len = 0;
} else
2010-06-03 21:24:43 +08:00
derror("%s: illegal value",specialname(tag));
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
reclaimconstant(tmp);
2010-06-03 21:24:43 +08:00
break;
case _SUPERBLOCK_FLAG:
2010-06-03 21:24:43 +08:00
case _DEFLATE_FLAG:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
tmp = nullconst();
tmp->nctype = NC_INT;
convert1(con,tmp);
if(tmp->nctype == NC_INT)
idata = tmp->value.int32v;
2010-06-03 21:24:43 +08:00
else
derror("%s: illegal value",specialname(tag));
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
reclaimconstant(tmp);
2010-06-03 21:24:43 +08:00
break;
case _CHUNKSIZES_FLAG:
case _FILLVALUE_FLAG:
/* Handle below */
break;
default: PANIC1("unexpected special tag: %d",tag);
}
2010-06-03 21:24:43 +08:00
if(tag == _FORMAT_FLAG) {
/* Watch out: this is a global attribute */
2010-06-03 21:24:43 +08:00
struct Kvalues* kvalue;
int found = 0;
/* Use the table in main.c */
for(kvalue = legalkinds; kvalue->name; kvalue++) {
if(sdata) {
if(strcmp(sdata, kvalue->name) == 0) {
globalspecials._Format = kvalue->k_flag;
/*Main.*/format_attribute = 1;
found = 1;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
if(kvalue->deprecated)
fprintf(stderr,"_Format=%s is deprecated; use corresponding _Format=<name>\n",sdata);
break;
}
}
2010-06-03 21:24:43 +08:00
}
if(!found)
derror("_Format: illegal value: %s",sdata);
} else if((GLOBAL_SPECIAL & tag) != 0) {
if(tag == _ISNETCDF4_FLAG)
globalspecials._IsNetcdf4 = tf;
else if(tag == _SUPERBLOCK_FLAG)
globalspecials._Superblock = idata;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
else if(tag == _NCPROPS_FLAG) {
globalspecials._NCProperties = sdata;
sdata = NULL;
2018-12-07 06:40:43 +08:00
}
} else {
Specialdata* special;
/* Set up special info */
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
special = &vsym->var.special;
if(tag == _FILLVALUE_FLAG) {
/* fillvalue must be a single value*/
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
if(!isconst && datalistlen(list) != 1)
derror("_FillValue: must be a single (possibly compound) value",
vsym->name);
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
if(isconst) {
list = const2list(con);
con = NULL;
}
/* check that the attribute value contains no fill values*/
if(containsfills(list)) {
derror("Attribute data may not contain fill values (i.e. _ )");
2010-06-03 21:24:43 +08:00
}
/* _FillValue is also a real attribute*/
if(vsym->objectclass != NC_VAR) {
derror("_FillValue attribute not associated with variable: %s",vsym->name);
}
if(tsym == NULL) tsym = vsym->typ.basetype;
else if(vsym->typ.basetype != tsym) {
derror("_FillValue attribute type does not match variable type: %s",vsym->name);
}
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
special->_Fillvalue = clonedatalist(list);
/* Create the corresponding attribute */
attr = makeattribute(install("_FillValue"),vsym,tsym,list,ATTRVAR);
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
list = NULL;
} else switch (tag) {
2015-08-16 06:26:35 +08:00
/* These will be output as attributes later */
case _STORAGE_FLAG:
if(!sdata)
derror("_Storage: illegal NULL value");
else if(strcmp(sdata,"contiguous") == 0)
special->_Storage = NC_CONTIGUOUS;
else if(strcmp(sdata,"compact") == 0)
special->_Storage = NC_COMPACT;
else if(strcmp(sdata,"chunked") == 0)
special->_Storage = NC_CHUNKED;
else
derror("_Storage: illegal value: %s",sdata);
special->flags |= _STORAGE_FLAG;
break;
case _FLETCHER32_FLAG:
special->_Fletcher32 = tf;
special->flags |= _FLETCHER32_FLAG;
break;
case _DEFLATE_FLAG:
special->_DeflateLevel = idata;
special->flags |= _DEFLATE_FLAG;
break;
case _SHUFFLE_FLAG:
special->_Shuffle = tf;
special->flags |= _SHUFFLE_FLAG;
break;
case _ENDIAN_FLAG:
if(!sdata)
derror("_Endianness: illegal NULL value");
else if(strcmp(sdata,"little") == 0)
special->_Endianness = 1;
else if(strcmp(sdata,"big") == 0)
special->_Endianness = 2;
else
derror("_Endianness: illegal value: %s",sdata);
special->flags |= _ENDIAN_FLAG;
break;
case _NOFILL_FLAG:
special->_Fill = (1 - tf); /* negate */
special->flags |= _NOFILL_FLAG;
break;
case _CHUNKSIZES_FLAG: {
int i;
2018-12-07 06:40:43 +08:00
list = (isconst ? const2list(con) : list);
special->nchunks = list->length;
2017-10-31 05:52:08 +08:00
special->_ChunkSizes = (size_t*)ecalloc(sizeof(size_t)*special->nchunks);
for(i=0;i<special->nchunks;i++) {
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
tmp = nullconst();
tmp->nctype = NC_INT;
convert1(list->data[i],tmp);
if(tmp->nctype == NC_INT) {
special->_ChunkSizes[i] = (size_t)tmp->value.int32v;
} else {
efree(special->_ChunkSizes);
derror("%s: illegal value",specialname(tag));
}
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
reclaimconstant(tmp);
}
special->flags |= _CHUNKSIZES_FLAG;
/* Chunksizes => storage == chunked */
special->flags |= _STORAGE_FLAG;
special->_Storage = NC_CHUNKED;
} break;
case _FILTER_FLAG:
#ifdef USE_NETCDF4
/* Parse the filter spec */
if(parsefilterflag(sdata,special) == NC_NOERR)
special->flags |= _FILTER_FLAG;
else {
2019-09-18 10:27:43 +08:00
derror("_Filter: unparsable filter spec: %s",sdata);
}
#else
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
derror("%s: the filter attribute requires netcdf-4 to be enabled",specialname(tag));
#endif
break;
default: PANIC1("makespecial: illegal token: %d",tag);
}
}
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
if(sdata) efree(sdata);
if(con) reclaimconstant(con);
if(list) reclaimdatalist(list);
2010-06-03 21:24:43 +08:00
return attr;
}
static Symbol*
makeattribute(Symbol* asym,
Symbol* vsym,
Symbol* tsym,
Datalist* data,
Attrkind kind) /* global var or unknown*/
{
asym->objectclass = NC_ATT;
asym->data = data;
switch (kind) {
case ATTRVAR:
asym->att.var = vsym;
asym->typ.basetype = tsym;
listpush(attdefs,(void*)asym);
addtogroup(asym);
2010-06-03 21:24:43 +08:00
break;
case ATTRGLOBAL:
asym->att.var = NULL; /* NULL => NC_GLOBAL*/
asym->typ.basetype = tsym;
listpush(gattdefs,(void*)asym);
addtogroup(asym);
2010-06-03 21:24:43 +08:00
break;
default: PANIC1("unexpected attribute type: %d",kind);
}
/* finally; check that the attribute value contains no fill values*/
if(containsfills(data)) {
derror("Attribute data may not contain fill values (i.e. _ ): %s",asym->name);
}
return asym;
}
static long long
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
extractint(NCConstant* con)
{
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
switch (con->nctype) {
case NC_BYTE: return (long long)(con->value.int8v);
case NC_SHORT: return (long long)(con->value.int16v);
case NC_INT: return (long long)(con->value.int32v);
case NC_UBYTE: return (long long)(con->value.uint8v);
case NC_USHORT: return (long long)(con->value.uint16v);
case NC_UINT: return (long long)(con->value.uint32v);
case NC_INT64: return (long long)(con->value.int64v);
default:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
derror("Not a signed integer type: %d",con->nctype);
break;
}
return 0;
}
2010-06-03 21:24:43 +08:00
static int
containsfills(Datalist* list)
{
if(list != NULL) {
int i;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
NCConstant** cons = list->data;
for(i=0;i<list->length;i++) {
if(cons[i]->nctype == NC_COMPOUND) {
if(containsfills(cons[i]->value.compoundv)) return 1;
} else if(cons[i]->nctype == NC_FILLVALUE)
2017-11-01 04:03:57 +08:00
return 1;
}
2010-06-03 21:24:43 +08:00
}
return 0;
}
/*
Try to infer the file type from the
kinds of constructs used in the cdl file.
*/
static void
vercheck(int tid)
{
switch (tid) {
case NC_UBYTE: markcdf4("netCDF4/5 type: UBYTE"); break;
case NC_USHORT: markcdf4("netCDF4/5 type: USHORT"); break;
case NC_UINT: markcdf4("netCDF4/5 type: UINT"); break;
case NC_INT64: markcdf4("netCDF4/5 type: INT64"); break;
case NC_UINT64: markcdf4("netCDF4/5 type: UINT64"); break;
case NC_STRING: markcdf4("netCDF4 type: STRING"); break;
case NC_VLEN: markcdf4("netCDF4 type: VLEN"); break;
case NC_OPAQUE: markcdf4("netCDF4 type: OPAQUE"); break;
case NC_ENUM: markcdf4("netCDF4 type: ENUM"); break;
case NC_COMPOUND: markcdf4("netCDF4 type: COMPOUND"); break;
default: break;
}
}
2011-09-16 00:57:16 +08:00
const char*
specialname(int tag)
{
struct Specialtoken* spp = specials;
for(;spp->name;spp++) {
if(spp->tag == tag)
return spp->name;
}
return "<unknown>";
}
#ifdef USE_NETCDF4
/*
Parse a filter spec string and store it in special
*/
static int
parsefilterflag(const char* sdata, Specialdata* special)
{
int stat = NC_NOERR;
if(sdata == NULL || strlen(sdata) == 0) return NC_EINVAL;
Mostly revert the filter code to reduce its complexity of use. re: https://github.com/Unidata/netcdf-c/issues/1836 Revert the internal filter code to simplify it. From the user's point of view, the only visible changes should be: 1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h 2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter. Internally,the dispatch table has been modified to get rid of the filter_actions entry and associated complex structures. It has been replaced with inq_var_filter_ids and inq_var_filter_info entries and the dispatch table version has been bumped to 3. Corresponding NOOP and NOTNC4 functions were added to libdispatch/dnotnc4.c. Also, the filter_action entries in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2, etc). This should only impact UDF users. In the process, it became clear that the form of the filters field in NC_VAR_INFO_T was format dependent, so I converted it to be of type void* and pushed its management into the various dispatch code bases. Specifically libhdf5 and libnczarr now manage the filters field in their own way. The auxilliary functions for parsing textual filter specifications were moved to netcdf_aux.h and were renamed to the following: * ncaux_h5filterspec_parse * ncaux_h5filterspec_parselist * ncaux_h5filterspec_free * ncaux_h5filter_fix8 Misc. Other Changes: 1. Document NUG/filters.md updated to reflect the changes above. 2. All the old data types (structs and enums) used by filter_actions actions were deleted. The exception is the NC_H5_Filterspec because it is needed by ncaux_h5filterspec_parselist. 3. Clientside filters were removed -- another enhancement for which no-one ever asked. 4. The ability to remove filters was itself removed. 5. Some functionality needed by nczarr was moved from libhdf5 to libsrc4 e.g. nc4_find_default_chunksizes 6. All the filterx code was removed 7. ncfilter.h and nc4filter.c no longer used Misc. Unrelated Changes: 1. The nczarr_test makefile clean was leaving some directories; so add clean-local to take care of them.
2020-09-28 02:43:46 +08:00
stat = ncaux_h5filterspec_parselist(sdata, NULL, &special->nfilters, &special->_Filters);
if(stat)
derror("Malformed filter spec: %s",sdata);
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
#ifdef GENDEBUG1
printfilters(special->nfilters,special->_Filters);
#endif
return stat;
}
#endif
2011-09-16 00:57:16 +08:00
/*
2011-09-17 02:36:08 +08:00
Since the arguments are all simple constants,
2011-09-16 00:57:16 +08:00
we can evaluate the function immediately
and return its value.
2011-09-17 02:36:08 +08:00
Note that currently, only a single value can
be returned.
2011-09-16 00:57:16 +08:00
*/
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
static NCConstant*
2011-09-16 00:57:16 +08:00
evaluate(Symbol* fcn, Datalist* arglist)
{
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
NCConstant* result = nullconst();
2011-09-16 00:57:16 +08:00
/* prepare the result */
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
result->lineno = fcn->lineno;
2011-09-16 00:57:16 +08:00
if(strcasecmp(fcn->name,"time") == 0) {
2011-09-17 02:36:08 +08:00
char* timekind = NULL;
char* timevalue = NULL;
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
result->nctype = NC_DOUBLE;
result->value.doublev = 0;
2011-09-17 02:36:08 +08:00
/* int time([string],string) */
switch (arglist->length) {
case 2:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
if(arglist->data[1]->nctype != NC_STRING) {
2011-09-17 02:36:08 +08:00
derror("Expected function signature: time([string,]string)");
2011-09-16 00:57:16 +08:00
goto done;
}
2011-09-17 02:36:08 +08:00
/* fall thru */
case 1:
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
if(arglist->data[0]->nctype != NC_STRING) {
2011-09-17 02:36:08 +08:00
derror("Expected function signature: time([string,]string)");
2011-09-16 00:57:16 +08:00
goto done;
}
2011-09-17 02:36:08 +08:00
break;
case 0:
default:
2011-09-17 02:36:08 +08:00
derror("Expected function signature: time([string,]string)");
goto done;
2011-09-16 00:57:16 +08:00
}
2011-09-17 02:36:08 +08:00
if(arglist->length == 2) {
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
timekind = arglist->data[0]->value.stringv.stringv;
timevalue = arglist->data[1]->value.stringv.stringv;
2011-09-17 02:36:08 +08:00
} else
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
timevalue = arglist->data[0]->value.stringv.stringv;
2011-09-17 02:36:08 +08:00
if(timekind == NULL) { /* use cd time as the default */
cdCompTime comptime;
CdTime cdtime;
cdCalenType timetype = cdStandard;
cdChar2Comp(timetype,timevalue,&comptime);
/* convert comptime to cdTime */
cdtime.year = comptime.year;
2011-09-17 02:36:08 +08:00
cdtime.month = comptime.month;
cdtime.day = comptime.day;
2011-09-17 02:36:08 +08:00
cdtime.hour = comptime.hour;
cdtime.baseYear = 1970;
cdtime.timeType = CdChron;
/* convert to double value */
Fix more memory leaks in netcdf-c library This is a follow up to PR https://github.com/Unidata/netcdf-c/pull/1173 Sorry that it is so big, but leak suppression can be complex. This PR fixes all remaining memory leaks -- as determined by -fsanitize=address, and with the exceptions noted below. Unfortunately. there remains a significant leak that I cannot solve. It involves vlens, and it is unclear if the leak is occurring in the netcdf-c library or the HDF5 library. I have added a check_PROGRAM to the ncdump directory to show the problem. The program is called tst_vlen_demo.c To exercise it, build the netcdf library with -fsanitize=address enabled. Then go into ncdump and do a "make clean check". This should build tst_vlen_demo without actually executing it. Then do the command "./tst_vlen_demo" to see the output of the memory checker. Note the the lost malloc is deep in the HDF5 library (in H5Tvlen.c). I am temporarily working around this error in the following way. 1. I modified several test scripts to not execute known vlen tests that fail as described above. 2. Added an environment variable called NC_VLEN_NOTEST. If set, then those specific tests are suppressed. This should mean that the --disable-utilities option to ./configure should not need to be set to get a memory leak clean build. This should allow for detection of any new leaks. Note: I used an environment variable rather than a ./configure option to control the vlen tests. This is because it is temporary (I hope) and because it is a bit tricky for shell scripts to access ./configure options. Finally, as before, this only been tested with netcdf-4 and hdf5 support.
2018-11-16 01:00:38 +08:00
Cdh2e(&cdtime,&result->value.doublev);
2011-09-17 02:36:08 +08:00
} else {
derror("Time conversion '%s' not supported",timekind);
goto done;
}
} else { /* Unknown function */
2011-09-16 00:57:16 +08:00
derror("Unknown function name: %s",fcn->name);
goto done;
}
done:
return result;
}
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
#ifdef GENDEBUG1
static void
Mostly revert the filter code to reduce its complexity of use. re: https://github.com/Unidata/netcdf-c/issues/1836 Revert the internal filter code to simplify it. From the user's point of view, the only visible changes should be: 1. The functions that convert text to filter specs have had their signature reverted and have been moved to netcdf_aux.h 2. Some filter API functions now return NC_ENOFILTER when inquiry is made about some filter. Internally,the dispatch table has been modified to get rid of the filter_actions entry and associated complex structures. It has been replaced with inq_var_filter_ids and inq_var_filter_info entries and the dispatch table version has been bumped to 3. Corresponding NOOP and NOTNC4 functions were added to libdispatch/dnotnc4.c. Also, the filter_action entries in dispatch tables were replaced for all dispatch code bases (HDF5, DAP2, etc). This should only impact UDF users. In the process, it became clear that the form of the filters field in NC_VAR_INFO_T was format dependent, so I converted it to be of type void* and pushed its management into the various dispatch code bases. Specifically libhdf5 and libnczarr now manage the filters field in their own way. The auxilliary functions for parsing textual filter specifications were moved to netcdf_aux.h and were renamed to the following: * ncaux_h5filterspec_parse * ncaux_h5filterspec_parselist * ncaux_h5filterspec_free * ncaux_h5filter_fix8 Misc. Other Changes: 1. Document NUG/filters.md updated to reflect the changes above. 2. All the old data types (structs and enums) used by filter_actions actions were deleted. The exception is the NC_H5_Filterspec because it is needed by ncaux_h5filterspec_parselist. 3. Clientside filters were removed -- another enhancement for which no-one ever asked. 4. The ability to remove filters was itself removed. 5. Some functionality needed by nczarr was moved from libhdf5 to libsrc4 e.g. nc4_find_default_chunksizes 6. All the filterx code was removed 7. ncfilter.h and nc4filter.c no longer used Misc. Unrelated Changes: 1. The nczarr_test makefile clean was leaving some directories; so add clean-local to take care of them.
2020-09-28 02:43:46 +08:00
printfilters(int nfilters, NC_Filterspec** filters)
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
{
int i;
fprintf(stderr,"xxx: nfilters=%lu: ",(unsigned long)nfilters);
for(i=0;i<nfilters;i++) {
int k;
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
NC_Filterspec* sp = filters[i];
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
fprintf(stderr,"{");
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
fprintf(stderr,"filterid=%s format=%s nparams=%lu params=%p",
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
sp->filterid,sp->format,(unsigned long)sp->nparams,sp->params);
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
if(sp->nparams > 0 && sp->params != NULL) {
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
fprintf(stderr," params={");
for(k=0;k<sp->nparams;k++) {
if(i==0) fprintf(stderr,",");
This PR adds EXPERIMENTAL support for accessing data in the cloud using a variant of the Zarr protocol and storage format. This enhancement is generically referred to as "NCZarr". The data model supported by NCZarr is netcdf-4 minus the user-defined types and the String type. In this sense it is similar to the CDF-5 data model. More detailed information about enabling and using NCZarr is described in the document NUG/nczarr.md and in a [Unidata Developer's blog entry](https://www.unidata.ucar.edu/blogs/developer/en/entry/overview-of-zarr-support-in). WARNING: this code has had limited testing, so do use this version for production work. Also, performance improvements are ongoing. Note especially the following platform matrix of successful tests: Platform | Build System | S3 support ------------------------------------ Linux+gcc | Automake | yes Linux+gcc | CMake | yes Visual Studio | CMake | no Additionally, and as a consequence of the addition of NCZarr, major changes have been made to the Filter API. NOTE: NCZarr does not yet support filters, but these changes are enablers for that support in the future. Note that it is possible (probable?) that there will be some accidental reversions if the changes here did not correctly mimic the existing filter testing. In any case, previously filter ids and parameters were of type unsigned int. In order to support the more general zarr filter model, this was all converted to char*. The old HDF5-specific, unsigned int operations are still supported but they are wrappers around the new, char* based nc_filterx_XXX functions. This entailed at least the following changes: 1. Added the files libdispatch/dfilterx.c and include/ncfilter.h 2. Some filterx utilities have been moved to libdispatch/daux.c 3. A new entry, "filter_actions" was added to the NCDispatch table and the version bumped. 4. An overly complex set of structs was created to support funnelling all of the filterx operations thru a single dispatch "filter_actions" entry. 5. Move common code to from libhdf5 to libsrc4 so that it is accessible to nczarr. Changes directly related to Zarr: 1. Modified CMakeList.txt and configure.ac to support both C and C++ -- this is in support of S3 support via the awd-sdk libraries. 2. Define a size64_t type to support nczarr. 3. More reworking of libdispatch/dinfermodel.c to support zarr and to regularize the structure of the fragments section of a URL. Changes not directly related to Zarr: 1. Make client-side filter registration be conditional, with default off. 2. Hack include/nc4internal.h to make some flags added by Ed be unique: e.g. NC_CREAT, NC_INDEF, etc. 3. cleanup include/nchttp.h and libdispatch/dhttp.c. 4. Misc. changes to support compiling under Visual Studio including: * Better testing under windows for dirent.h and opendir and closedir. 5. Misc. changes to the oc2 code to support various libcurl CURLOPT flags and to centralize error reporting. 6. By default, suppress the vlen tests that have unfixed memory leaks; add option to enable them. 7. Make part of the nc_test/test_byterange.sh test be contingent on remotetest.unidata.ucar.edu being accessible. Changes Left TO-DO: 1. fix provenance code, it is too HDF5 specific.
2020-06-29 08:02:47 +08:00
fprintf(stderr,"%s",sp->params[i]);
Add support for multiple filters per variable. re: https://github.com/Unidata/netcdf-c/issues/1584 Support has been added for multiple filters per variable. This affects a number of components in netcdf. The new APIs are documented in NUG/filters.md. The primary changes are: * A set of new functions are provided (see __include/netcdf_filter.h__). - Obtain a list of the filters associated with a variable - Obtain the parameters for a specific filter. * The existing __nc_inq_var_filter__ function now returns info about the first defined filter. * The utilities (ncgen, ncdump, and nccopy) now support an extended format for specifying a sequence of filters. The general form is __<filter>|<filter>..._. * The ncdump **_Filter** attribute now dumps a list of all the filters associated with a variable using the above new format. * Filter specifications can now use a filter name instead of number for filters known to the netcdf library, which in turn is taken from the HDF5 filter registration page. * New errors are defined: NC_EFILTER and NC_ENOFILTER. The latter is returned if an attempt is made to access an unknown filter. * Internally, the dispatch table has been extended to add a function to handle all of the filter functions. * New, filter-related, tests were added to nc_test4. * A new plugin was added to the plugins directory to help with testing. Notes: 1. The shuffle and fletcher32 filters are not part of the multifilter system. Misc. changes: 1. A debug module was added to libhdf5 to help catch error locations.
2020-02-17 03:59:33 +08:00
}
fprintf(stderr,"}");
} else
fprintf(stderr,"params=NULL");
fprintf(stderr,"}");
}
fprintf(stderr,"\n");
fflush(stderr);
}
#endif