netcdf-c/ncdap_test/CMakeLists.txt

SET(abs_top_srcdir ${CMAKE_CURRENT_SOURCE_DIR})

remove_definitions(-DDLL_EXPORT)
add_definitions(-D"TOPSRCDIR=${CMAKE_SOURCE_DIR}")

FILE(GLOB COPY_FILES ${CMAKE_CURRENT_SOURCE_DIR}/*.sh)

FILE(COPY ${COPY_FILES} DESTINATION ${CMAKE_CURRENT_BINARY_DIR}/ FILE_PERMISSIONS OWNER_WRITE OWNER_READ OWNER_EXECUTE)

IF(ENABLE_DAP_REMOTE_TESTS)
  ADD_EXECUTABLE(nctestserver nctestserver.c)
  TARGET_LINK_LIBRARIES(nctestserver netcdf ${ALL_TLL_LIBS})

  ####
  # We have to do a little tweaking
  # to remove the Release/ and Debug/ directories
  # in MSVC builds.  This is required to get
  # test scripts to work.
  ####
  IF(MSVC)
    SET_TARGET_PROPERTIES(nctestserver PROPERTIES RUNTIME_OUTPUT_DIRECTORY
      ${CMAKE_CURRENT_BINARY_DIR})
    SET_TARGET_PROPERTIES(nctestserver PROPERTIES RUNTIME_OUTPUT_DIRECTORY_DEBUG
      ${CMAKE_CURRENT_BINARY_DIR})
    SET_TARGET_PROPERTIES(nctestserver PROPERTIES RUNTIME_OUTPUT_DIRECTORY_RELEASE
      ${CMAKE_CURRENT_BINARY_DIR})
  ENDIF()
ENDIF()

IF(ENABLE_TESTS)
  # Base tests
  # The tests are set up as a combination of shell scripts and executables that
  # must be run in a particular order. It is painful but will use macros to help
  # keep it from being too bad.
  # Binary Test Macro

  add_sh_test(ncdap tst_ncdap3)

  IF(NOT MSVC)
    add_bin_env_test(ncdap t_dap3a)
    add_bin_env_test(ncdap test_cvt)
    add_bin_env_test(ncdap test_vara)
  ENDIF()

  IF(ENABLE_DAP_REMOTE_TESTS)
    add_sh_test(ncdap tst_remote3)
    add_sh_test(ncdap tst_formatx)
    add_bin_test(ncdap test_partvar)
    IF(ENABLE_DAP_LONG_TESTS)
      add_sh_test(ncdap tst_longremote3)
    ENDIF()
    add_sh_test(ncdap testurl)

    add_bin_test(ncdap test_nstride_cached)
    add_bin_test(ncdap t_misc)

    IF(ENABLE_DAP_AUTH_TESTS)
##obsolete      add_bin_test(ncdap t_auth)
      add_sh_test(ncdap testauth)
    ENDIF()

    add_bin_test(ncdap test_varm3)

    ###
    # This test relates to NCF-330 in
    # the Unidata JIRA system.
    ###
    #add_bin_test(ncdap t_ncf330)

  ENDIF()
ENDIF()

ADD_SUBDIRECTORY(testdata3)
ADD_SUBDIRECTORY(expected3)
ADD_SUBDIRECTORY(expected4)
ADD_SUBDIRECTORY(expectremote3)
ADD_SUBDIRECTORY(expectremote4)


## Specify files to be distributed by 'make dist'
FILE(GLOB CUR_EXTRA_DIST RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/*.c ${CMAKE_CURRENT_SOURCE_DIR}/*.h ${CMAKE_CURRENT_SOURCE_DIR}/*.sh)
SET(CUR_EXTRA_DIST ${CUR_EXTRA_DIST} CMakeLists.txt Makefile.am)
ADD_EXTRA_DIST("${CUR_EXTRA_DIST}")
Added new tests, CMake functionality. 2012-08-22 04:08:53 +08:00			`SET(abs_top_srcdir ${CMAKE_CURRENT_SOURCE_DIR})`

			`remove_definitions(-DDLL_EXPORT)`
Merging the win_netcdf branch into the trunk. 2012-09-28 06:50:41 +08:00			`add_definitions(-D"TOPSRCDIR=${CMAKE_SOURCE_DIR}")`
Modified tests to determine location dynamically instead of from an environmental variable. 2012-08-22 06:52:40 +08:00
Added initial 'make dist', 'make distcheck' support to CMake-based builds. 2013-06-04 00:42:04 +08:00			`FILE(GLOB COPY_FILES ${CMAKE_CURRENT_SOURCE_DIR}/*.sh)`
Added new tests, CMake functionality. 2012-08-22 04:08:53 +08:00
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00			`FILE(COPY ${COPY_FILES} DESTINATION ${CMAKE_CURRENT_BINARY_DIR}/ FILE_PERMISSIONS OWNER_WRITE OWNER_READ OWNER_EXECUTE)`
Added new tests, CMake functionality. 2012-08-22 04:08:53 +08:00
1. Any test that references nctestserver/NC_findtestserver should be under ENABLE_DAP_REMOTE_TESTS. Fixed to make sure that this is so. Also attempted to fix ncdap_test/CMakeLists.txt, but probably got it wrong. HT to Nico Schlomer. 2. Attempted to reduce the number of conversion errors when -Wconversion is set. Fixed oc2, but rest of netcdf remains to be done. HT to Nico Schlomer. 3. When doing #2, I discovered an error in ncgen.y that has remained hidden. This required some other test case fixes. 2014-03-09 11:41:30 +08:00			`IF(ENABLE_DAP_REMOTE_TESTS)`
Cleaned up indentation, white space in multiple CMakeLists.txt files. 2014-04-22 01:15:33 +08:00			`ADD_EXECUTABLE(nctestserver nctestserver.c)`
			`TARGET_LINK_LIBRARIES(nctestserver netcdf ${ALL_TLL_LIBS})`
More work on getting the shell scripts working properly with cmake under MSYS. 2015-01-31 03:55:46 +08:00
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00			`####`
			`# We have to do a little tweaking`
More work on getting the shell scripts working properly with cmake under MSYS. 2015-01-31 03:55:46 +08:00			`# to remove the Release/ and Debug/ directories`
			`# in MSVC builds. This is required to get`
			`# test scripts to work.`
			`####`
			`IF(MSVC)`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00			`SET_TARGET_PROPERTIES(nctestserver PROPERTIES RUNTIME_OUTPUT_DIRECTORY`
More work on getting the shell scripts working properly with cmake under MSYS. 2015-01-31 03:55:46 +08:00			`${CMAKE_CURRENT_BINARY_DIR})`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00			`SET_TARGET_PROPERTIES(nctestserver PROPERTIES RUNTIME_OUTPUT_DIRECTORY_DEBUG`
More work on getting the shell scripts working properly with cmake under MSYS. 2015-01-31 03:55:46 +08:00			`${CMAKE_CURRENT_BINARY_DIR})`
			`SET_TARGET_PROPERTIES(nctestserver PROPERTIES RUNTIME_OUTPUT_DIRECTORY_RELEASE`
			`${CMAKE_CURRENT_BINARY_DIR})`
			`ENDIF()`
1. Any test that references nctestserver/NC_findtestserver should be under ENABLE_DAP_REMOTE_TESTS. Fixed to make sure that this is so. Also attempted to fix ncdap_test/CMakeLists.txt, but probably got it wrong. HT to Nico Schlomer. 2. Attempted to reduce the number of conversion errors when -Wconversion is set. Fixed oc2, but rest of netcdf remains to be done. HT to Nico Schlomer. 3. When doing #2, I discovered an error in ncgen.y that has remained hidden. This required some other test case fixes. 2014-03-09 11:41:30 +08:00			`ENDIF()`
Added new tests, CMake functionality. 2012-08-22 04:08:53 +08:00
			`IF(ENABLE_TESTS)`
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE. 2014-03-14 00:06:12 +08:00			`# Base tests`
			`# The tests are set up as a combination of shell scripts and executables that`
			`# must be run in a particular order. It is painful but will use macros to help`
			`# keep it from being too bad.`
			`# Binary Test Macro`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE. 2014-03-14 00:06:12 +08:00			`add_sh_test(ncdap tst_ncdap3)`
1. synch with oc 2. fix ocuri parameter handling 3. add ncdap_test/testuri.sh to test parameter handling. 2014-12-28 11:42:01 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE. 2014-03-14 00:06:12 +08:00			`IF(NOT MSVC)`
			`add_bin_env_test(ncdap t_dap3a)`
			`add_bin_env_test(ncdap test_cvt)`
			`add_bin_env_test(ncdap test_vara)`
			`ENDIF()`

			`IF(ENABLE_DAP_REMOTE_TESTS)`
			`add_sh_test(ncdap tst_remote3)`
			`add_sh_test(ncdap tst_formatx)`
			`add_bin_test(ncdap test_partvar)`
			`IF(ENABLE_DAP_LONG_TESTS)`
			`add_sh_test(ncdap tst_longremote3)`
			`ENDIF()`
1. synch with oc 2. fix ocuri parameter handling 3. add ncdap_test/testuri.sh to test parameter handling. 2014-12-28 11:42:01 +08:00			`add_sh_test(ncdap testurl)`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE. 2014-03-14 00:06:12 +08:00			`add_bin_test(ncdap test_nstride_cached)`
			`add_bin_test(ncdap t_misc)`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE. 2014-03-14 00:06:12 +08:00			`IF(ENABLE_DAP_AUTH_TESTS)`
1. fix nc_open_mem doxygen description 2. fix some bugs wrt to cygwin vs linux. 3. add to RELEASE_NOTES 4. try to fix tst_inmemory fd error by putting the first arg to dotest in quotes. 2015-05-29 09:23:33 +08:00			`##obsolete add_bin_test(ncdap t_auth)`
Make cmake run testauth.sh 2015-01-01 13:53:03 +08:00			`add_sh_test(ncdap testauth)`
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE. 2014-03-14 00:06:12 +08:00			`ENDIF()`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00
Added test_varm3 back in to the list of active tests, to keep it in step with autotools. Corrected configure.ac; CURLOPT_RESPONSE_CODE should have been CURLINFO_RESPONSE_CODE. 2014-03-14 00:06:12 +08:00			`add_bin_test(ncdap test_varm3)`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00
Moved test for [NCF-330] out of 'known-failing' fenceposts and into the regular test rotation. Also added it to the autotools-based tests. 2015-05-09 03:43:59 +08:00			`###`
			`# This test relates to NCF-330 in`
			`# the Unidata JIRA system.`
			`###`
disabled a remote test that is currently hanging. 2015-05-16 06:08:48 +08:00			`#add_bin_test(ncdap t_ncf330)`
Added test for issue found in [NCF-330]. 2015-05-02 05:28:59 +08:00
Cleaned up indentation, white space in multiple CMakeLists.txt files. 2014-04-22 01:15:33 +08:00			`ENDIF()`
Added new tests, CMake functionality. 2012-08-22 04:08:53 +08:00			`ENDIF()`
1. synch with oc 2. fix ocuri parameter handling 3. add ncdap_test/testuri.sh to test parameter handling. 2014-12-28 11:42:01 +08:00
Resolved Conflict when cherry-picking patches. 2014-02-07 02:13:45 +08:00			`ADD_SUBDIRECTORY(testdata3)`
Added initial 'make dist', 'make distcheck' support to CMake-based builds. 2013-06-04 00:42:04 +08:00			`ADD_SUBDIRECTORY(expected3)`
			`ADD_SUBDIRECTORY(expected4)`
			`ADD_SUBDIRECTORY(expectremote3)`
			`ADD_SUBDIRECTORY(expectremote4)`


			`## Specify files to be distributed by 'make dist'`
			`FILE(GLOB CUR_EXTRA_DIST RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/.c ${CMAKE_CURRENT_SOURCE_DIR}/.h ${CMAKE_CURRENT_SOURCE_DIR}/*.sh)`
			`SET(CUR_EXTRA_DIST ${CUR_EXTRA_DIST} CMakeLists.txt Makefile.am)`
Add http auth test to cmake 2013-11-16 04:44:27 +08:00			`ADD_EXTRA_DIST("${CUR_EXTRA_DIST}")`