netcdf-c/ncdump/tst_rcmerge.c

44 lines
958 B
C
Raw Normal View History

Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include "netcdf.h"
#include "ncrc.h"
int
main(int argc, char** argv)
{
size_t i,nentries = 0;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
NCRCglobalstate* ngs = ncrc_getglobalstate();
NCRCinfo* info = NULL;
NCRCentry* entry = NULL;
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
/* Cause the .rc files to be read and merged */
nc_initialize();
if((ngs = ncrc_getglobalstate())==NULL) abort();
info = &ngs->rcinfo;
if(info->ignore) {
fprintf(stderr,".rc ignored\n");
exit(0);
}
/* Print out the .rc entries */
if((nentries = NC_rcfile_length(info))==0) {
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
printf("<empty>\n");
exit(0);
}
for(i=0;i<nentries;i++) {
entry = NC_rcfile_ith(info,i);
if(entry == NULL) abort();
if(entry->host != NULL) {
printf("[%s ",entry->host);
if(entry->path != NULL)
printf("/%s] ",entry->path);
printf("]");
}
printf("|%s|->|%s|\n",entry->key,entry->value);
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu
2021-04-25 09:48:15 +08:00
}
return 0;
}