netcdf-c/nczarr_test/ref_nczarr2zarr.cdl

netcdf nczarr2zarr {
dimensions:
	_zdim_8 = 8 ;
variables:
	int v(_zdim_8, _zdim_8) ;
		v:_FillValue = -1 ;
data:

 v =
  _, _, _, _, _, _, _, _,
  _, _, _, _, _, _, _, _,
  _, _, _, _, _, _, _, _,
  _, _, _, _, _, _, _, _,
  _, _, _, _, 0, 1, 2, 3,
  _, _, _, _, 4, 5, 6, 7,
  _, _, _, _, 8, 9, 10, 11,
  _, _, _, _, 12, 13, 14, 15 ;
}
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu 2021-04-25 09:48:15 +08:00			`netcdf nczarr2zarr {`
			`dimensions:`
Add filter support to NCZarr Filter support has three goals: 1. Use the existing HDF5 filter implementations, 2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr, 3. Allow filters to be used even when HDF5 is disabled Detailed usage directions are define in docs/filters.md. For now, the existing filter API is left in place. So filters are defined using ''nc_def_var_filter'' using the HDF5 style where the id and parameters are unsigned integers. This is a big change since filters affect many parts of the code. In the following, the terms "compressor" and "filter" and "codec" are generally used synonomously. ### Filter-Related Changes: * In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms. * Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h. * Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out. * Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h. * Add a number of new test to test the new nczarr filters. * Let ncgen parse _Codecs attribute, although it is ignored. ### Plugin directory changes: * Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file * Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip * Add a Codec defaulter (see docs/filters.md) for the big four filters. * Make plugins work with windows by properly adding __declspec declaration. ### Misc. Non-Filter Changes * Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5. * Improve support for caching * More fixes for path conversion code * Fix misc. memory leaks * Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath. * Add a number of new test to test the non-filter fixes. * Update the parsers * Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32' 2021-09-03 07:04:26 +08:00			`_zdim_8 = 8 ;`
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu 2021-04-25 09:48:15 +08:00			`variables:`
Add filter support to NCZarr Filter support has three goals: 1. Use the existing HDF5 filter implementations, 2. Allow filter metadata to be stored in the NumCodecs metadata format used by Zarr, 3. Allow filters to be used even when HDF5 is disabled Detailed usage directions are define in docs/filters.md. For now, the existing filter API is left in place. So filters are defined using ''nc_def_var_filter'' using the HDF5 style where the id and parameters are unsigned integers. This is a big change since filters affect many parts of the code. In the following, the terms "compressor" and "filter" and "codec" are generally used synonomously. ### Filter-Related Changes: * In order to support dynamic loading of shared filter libraries, a new library was added in the libncpoco directory; it helps to isolate dynamic loading across multiple platforms. * Provide a json parsing library for use by plugins; this is created by merging libdispatch/ncjson.c with include/ncjson.h. * Add a new _Codecs attribute to allow clients to see what codecs are being used; let ncdump -s print it out. * Provide special headers to help support compilation of HDF5 filters when HDF5 is not enabled: netcdf_filter_hdf5_build.h and netcdf_filter_build.h. * Add a number of new test to test the new nczarr filters. * Let ncgen parse _Codecs attribute, although it is ignored. ### Plugin directory changes: * Add support for the Blosc compressor; this is essential because it is the most common compressor used in Zarr datasets. This also necessitated adding a CMake FindBlosc.cmake file * Add NCZarr support for the big-four filters provided by HDF5: shuffle, fletcher32, deflate (zlib), and szip * Add a Codec defaulter (see docs/filters.md) for the big four filters. * Make plugins work with windows by properly adding __declspec declaration. ### Misc. Non-Filter Changes * Replace most uses of USE_NETCDF4 (deprecated) with USE_HDF5. * Improve support for caching * More fixes for path conversion code * Fix misc. memory leaks * Add new utility -- ncdump/ncpathcvt -- that does more or less the same thing as cygpath. * Add a number of new test to test the non-filter fixes. * Update the parsers * Convert most instances of '#ifdef _MSC_VER' to '#ifdef _WIN32' 2021-09-03 07:04:26 +08:00			`int v(_zdim_8, _zdim_8) ;`
Upgrade the nczarr code to match Zarr V2 Re: https://github.com/zarr-developers/zarr-python/pull/716 The Zarr version 2 spec has been extended to include the ability to choose the dimension separator in chunk name keys. The legal separators has been extended from {'.'} to {'.' '/'}. So now it is possible to use a key like "0/1/2/0" for chunk names. This PR implements this for NCZarr. The V2 spec now says that this separator can be set on a per-variable basis. For now, I have chosen to allow this be set only globally by adding a key named "ZARR.DIMENSION_SEPARATOR=<char>" in the .daprc/.dodsrc/ncrc file. Currently, the only legal separator characters are '.' (the default) and '/'. On writing, this key will only be written if its value is different than the default. This change caused problems because supporting a separator of '/' is difficult to parse when keys/paths use '/' as the path separator. A test case was added for this. Additionally, make nczarr be enabled default by default. This required some additional changes so that if zip and/or AWS S3 sdk are unavailable, then they are disabled for NCZarr. In addition the following unrelated changes were made. 1. Tested that pure-zarr mode could read an nczarr formatted store. 1. The .rc file handling now merges all known .rc files (.ncrc,.daprc, and .dodsrc) in that order and using those in HOME first, then in current directory. For duplicate entries, the later ones override the earlier ones. This change is to remove some of the conflicts inherent in the current .rc file load process. A set of test cases was also added. 1. Re-order tests in configure.ac and CMakeLists.txt so that if libcurl is not found then the other options that depend upon it properly are disabled. 1. I decided that xarray support should be enabled by default for pure zarr. In order to allow disabling, I added a new mode flag "noxarray". 1. Certain test in nczarr_test depend on use of .dodsrc. In order for these to work when testing in parallel, some inter-test dependencies needed to be added. 1. Improved authorization testing to use changes in thredds.ucar.edu 2021-04-25 09:48:15 +08:00			`v:_FillValue = -1 ;`
			`data:`

			`v =`
			`_, _, _, _, _, _, _, _,`
			`_, _, _, _, _, _, _, _,`
			`_, _, _, _, _, _, _, _,`
			`_, _, _, _, _, _, _, _,`
			`_, _, _, _, 0, 1, 2, 3,`
			`_, _, _, _, 4, 5, 6, 7,`
			`_, _, _, _, 8, 9, 10, 11,`
			`_, _, _, _, 12, 13, 14, 15 ;`
			`}`