ncursesw-morphos/doc/html/man/curs_add_wch.3x.html
Thomas E. Dickey 6208c89f98 ncurses 6.0 - patch 20160130
+ improve formatting of man/curs_refresh.3x and man/tset.1 manpages
+ regenerate HTML manpages using newer man2html to eliminate some
  unwanted blank lines.
2016-01-31 02:15:39 +00:00

241 lines
14 KiB
HTML

<!--
****************************************************************************
* Copyright (c) 2001-2012,2015 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* "Software"), to deal in the Software without restriction, including *
* without limitation the rights to use, copy, modify, merge, publish, *
* distribute, distribute with modifications, sublicense, and/or sell *
* copies of the Software, and to permit persons to whom the Software is *
* furnished to do so, subject to the following conditions: *
* *
* The above copyright notice and this permission notice shall be included *
* in all copies or substantial portions of the Software. *
* *
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
* IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
* THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
* *
* Except as contained in this notice, the name(s) of the above copyright *
* holders shall not be used in advertising or otherwise to promote the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
* @Id: curs_add_wch.3x,v 1.16 2015/07/20 23:44:56 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<meta name="generator" content="Manpage converted by man2html - see http://invisible-island.net/scripts/readme.html#others_scripts">
<TITLE>curs_add_wch 3x</TITLE>
<link rev=made href="mailto:bug-ncurses@gnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
<H1 class="no-header">curs_add_wch 3x</H1>
<PRE>
<STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG> <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
<STRONG>add_wch</STRONG>, <STRONG>wadd_wch</STRONG>, <STRONG>mvadd_wch</STRONG>, <STRONG>mvwadd_wch</STRONG>, <STRONG>echo_wchar</STRONG>,
<STRONG>wecho_wchar</STRONG> - add a complex character and rendition to a
<STRONG>curses</STRONG> window, then advance the cursor
</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
<STRONG>#include</STRONG> <STRONG>&lt;curses.h&gt;</STRONG>
<STRONG>int</STRONG> <STRONG>add_wch(</STRONG> <STRONG>const</STRONG> <STRONG>cchar_t</STRONG> <STRONG>*</STRONG><EM>wch</EM> <STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>wadd_wch(</STRONG> <STRONG>WINDOW</STRONG> <STRONG>*</STRONG><EM>win</EM><STRONG>,</STRONG> <STRONG>const</STRONG> <STRONG>cchar_t</STRONG> <STRONG>*</STRONG><EM>wch</EM> <STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>mvadd_wch(</STRONG> <STRONG>int</STRONG> <EM>y</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>x</EM><STRONG>,</STRONG> <STRONG>const</STRONG> <STRONG>cchar_t</STRONG> <STRONG>*</STRONG><EM>wch</EM> <STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>mvwadd_wch(</STRONG> <STRONG>WINDOW</STRONG> <STRONG>*</STRONG><EM>win</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>y</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>x</EM><STRONG>,</STRONG> <STRONG>const</STRONG> <STRONG>cchar_t</STRONG>
<STRONG>*</STRONG><EM>wch</EM> <STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>echo_wchar(</STRONG> <STRONG>const</STRONG> <STRONG>cchar_t</STRONG> <STRONG>*</STRONG><EM>wch</EM> <STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>wecho_wchar(</STRONG> <STRONG>WINDOW</STRONG> <STRONG>*</STRONG><EM>win</EM><STRONG>,</STRONG> <STRONG>const</STRONG> <STRONG>cchar_t</STRONG> <STRONG>*</STRONG><EM>wch</EM> <STRONG>);</STRONG>
</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
</PRE><H3><a name="h3-add_wch">add_wch</a></H3><PRE>
The <STRONG>add_wch</STRONG>, <STRONG>wadd_wch</STRONG>, <STRONG>mvadd_wch</STRONG>, and <STRONG>mvwadd_wch</STRONG> functions
put the complex character <EM>wch</EM> into the given window at its
current position, which is then advanced. These functions
perform wrapping and special-character processing as fol-
lows:
<STRONG>o</STRONG> If <EM>wch</EM> refers to a spacing character, then any previ-
ous character at that location is removed. A new
character specified by <EM>wch</EM> is placed at that location
with rendition specified by <EM>wch</EM>. The cursor then
advances to the next spacing character on the screen.
<STRONG>o</STRONG> If <EM>wch</EM> refers to a non-spacing character, all previous
characters at that location are preserved. The non-
spacing characters of <EM>wch</EM> are added to the spacing
complex character, and the rendition specified by <EM>wch</EM>
is ignored.
<STRONG>o</STRONG> If the character part of <EM>wch</EM> is a tab, newline,
backspace or other control character, the window is
updated and the cursor moves as if <STRONG>addch</STRONG> were called.
</PRE><H3><a name="h3-echo_wchar">echo_wchar</a></H3><PRE>
The <STRONG>echo_wchar</STRONG> function is functionally equivalent to a
call to <STRONG>add_wch</STRONG> followed by a call to <STRONG>refresh</STRONG>. Similarly,
the <STRONG>wecho_wchar</STRONG> is functionally equivalent to a call to
<STRONG>wadd_wch</STRONG> followed by a call to <STRONG>wrefresh</STRONG>. The knowledge
that only a single character is being output is taken into
consideration and, for non-control characters, a consider-
able performance gain might be seen by using the *<STRONG>echo</STRONG>*
functions instead of their equivalents.
</PRE><H3><a name="h3-Line-Graphics">Line Graphics</a></H3><PRE>
Like <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>, <STRONG>addch_wch</STRONG> accepts symbols which make it
simple to draw lines and other frequently used special
characters. These symbols correspond to the same VT100
line-drawing set as <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>.
<EM>Name</EM> <EM>Unicode</EM> <EM>Default</EM> <EM>Description</EM>
----------------------------------------------------------------
WACS_BLOCK 0x25ae # solid square block
WACS_BOARD 0x2592 # board of squares
WACS_BTEE 0x2534 + bottom tee
WACS_BULLET 0x00b7 o bullet
WACS_CKBOARD 0x2592 : checker board (stipple)
WACS_DARROW 0x2193 v arrow pointing down
WACS_DEGREE 0x00b0 ' degree symbol
WACS_DIAMOND 0x25c6 + diamond
WACS_GEQUAL 0x2265 &gt; greater-than-or-equal-to
WACS_HLINE 0x2500 - horizontal line
WACS_LANTERN 0x2603 # lantern symbol
WACS_LARROW 0x2190 &lt; arrow pointing left
WACS_LEQUAL 0x2264 &lt; less-than-or-equal-to
WACS_LLCORNER 0x2514 + lower left-hand corner
WACS_LRCORNER 0x2518 + lower right-hand corner
WACS_LTEE 0x2524 + left tee
WACS_NEQUAL 0x2260 ! not-equal
WACS_PI 0x03c0 * greek pi
WACS_PLMINUS 0x00b1 # plus/minus
WACS_PLUS 0x253c + plus
WACS_RARROW 0x2192 &gt; arrow pointing right
WACS_RTEE 0x251c + right tee
WACS_S1 0x23ba - scan line 1
WACS_S3 0x23bb - scan line 3
WACS_S7 0x23bc - scan line 7
WACS_S9 0x23bd _ scan line 9
WACS_STERLING 0x00a3 f pound-sterling symbol
WACS_TTEE 0x252c + top tee
WACS_UARROW 0x2191 ^ arrow pointing up
WACS_ULCORNER 0x250c + upper left-hand corner
WACS_URCORNER 0x2510 + upper right-hand corner
WACS_VLINE 0x2502 | vertical line
The wide-character configuration of ncurses also defines
symbols for thick- and double-lines:
<EM>Name</EM> <EM>Unicode</EM> <EM>Default</EM> <EM>Description</EM>
---------------------------------------------------------------------
WACS_T_ULCORNER 0x250f + thick upper left corner
WACS_T_LLCORNER 0x2517 + thick lower left corner
WACS_T_URCORNER 0x2513 + thick upper right corner
WACS_T_LRCORNER 0x251b + thick lower right corner
WACS_T_LTEE 0x252b + thick tee pointing right
WACS_T_RTEE 0x2523 + thick tee pointing left
WACS_T_BTEE 0x253b + thick tee pointing up
WACS_T_TTEE 0x2533 + thick tee pointing down
WACS_T_HLINE 0x2501 - thick horizontal line
WACS_T_VLINE 0x2503 | thick vertical line
WACS_T_PLUS 0x254b + thick large plus or crossover
WACS_D_ULCORNER 0x2554 + double upper left corner
WACS_D_LLCORNER 0x255a + double lower left corner
WACS_D_URCORNER 0x2557 + double upper right corner
WACS_D_LRCORNER 0x255d + double lower right corner
WACS_D_RTEE 0x2563 + double tee pointing left
WACS_D_LTEE 0x2560 + double tee pointing right
WACS_D_BTEE 0x2569 + double tee pointing up
WACS_D_TTEE 0x2566 + double tee pointing down
WACS_D_HLINE 0x2550 - double horizontal line
WACS_D_VLINE 0x2551 | double vertical line
WACS_D_PLUS 0x256c + double large plus or crossover
</PRE><H2><a name="h2-RETURN-VALUE">RETURN VALUE</a></H2><PRE>
All routines return the integer <STRONG>ERR</STRONG> upon failure and <STRONG>OK</STRONG> on
success.
Functions with a "mv" prefix first perform a cursor move-
ment using <STRONG>wmove</STRONG>, and return an error if the position is
outside the window, or if the window pointer is null.
</PRE><H2><a name="h2-NOTES">NOTES</a></H2><PRE>
Note that <STRONG>add_wch</STRONG>, <STRONG>mvadd_wch</STRONG>, <STRONG>mvwadd_wch</STRONG>, and <STRONG>echo_wchar</STRONG>
may be macros.
</PRE><H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
All of these functions are described in the XSI Curses
standard, Issue 4. The defaults specified for line-draw-
ing characters apply in the POSIX locale.
X/Open Curses makes it clear that the WACS_ symbols should
be defined as a pointer to <STRONG>cchar_t</STRONG> data, e.g., in the dis-
cussion of <STRONG>border_set</STRONG>. A few implementations are problem-
atic:
<STRONG>o</STRONG> NetBSD curses defines the symbols as a <STRONG>wchar_t</STRONG> within
a <STRONG>cchar_t</STRONG>.
<STRONG>o</STRONG> HPUX curses equates some of the <EM>ACS</EM><STRONG>_</STRONG> symbols to the
analogous <EM>WACS</EM><STRONG>_</STRONG> symbols as if the <EM>ACS</EM><STRONG>_</STRONG> symbols were
wide characters. The misdefined symbols are the
arrows and other symbols which are not used for line-
drawing.
X/Open Curses does not define symbols for thick- or dou-
ble-lines. SVr4 curses implementations defined their
line-drawing symbols in terms of intermediate symbols.
This implementation extends those symbols, providing new
definitions which are not in the SVr4 implementations.
</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
<STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>, <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>, <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>,
<STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>, <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>, <STRONG>putwc(3)</STRONG>
<STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
</PRE>
<div class="nav">
<ul>
<li><a href="#h2-NAME">NAME</a></li>
<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
<ul>
<li><a href="#h3-add_wch">add_wch</a></li>
<li><a href="#h3-echo_wchar">echo_wchar</a></li>
<li><a href="#h3-Line-Graphics">Line Graphics</a></li>
</ul>
</li>
<li><a href="#h2-RETURN-VALUE">RETURN VALUE</a></li>
<li><a href="#h2-NOTES">NOTES</a></li>
<li><a href="#h2-PORTABILITY">PORTABILITY</a></li>
<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>
</ul>
</div>
</BODY>
</HTML>