ncursesw-morphos/man/tic.1m

.TH tic 1M ""
.ds n 5
.ds d @DATADIR@/terminfo
.SH NAME
\fBtic\fR - the \fIterminfo\fR entry-description compiler
.SH SYNOPSIS
\fBtic\fR [\fB-v\fR[\fIn\fR]] [\fB-w\fR[\fIn\fR]] [\fB-1hcpICNRrsTu\fR] [\fB-e\fR \fInames\fR] \fIfile\fR
.br
.SH DESCRIPTION
The command \fBtic\fR translates a \fBterminfo\fR file from source
format into compiled format.  The compiled format is necessary for use with
the library routines in \fBncurses\fR(3X).
.PP
The results are normally placed in the system terminfo
directory \fB\*d\fR.  There are two ways to change this behavior.
.PP
First, you may override the system default by setting the variable
\fBTERMINFO\fR in your shell environment to a valid (existing) directory name.
.PP
Secondly, if \fBtic\fR cannot get access to \fI\*d\fR or your TERMINFO
directory, it looks for the directory \fI$HOME/.terminfo\fR; if that directory
exists, the entry is placed there.
.PP
Libraries that read terminfo entries are expected to check for a TERMINFO
directory first, look at \fI$HOME/.terminfo\fR if TERMINFO is not set, and
finally look in \fI\*d\fR.
.TP
\fB-h\fR
Print help message and exit.
.TP
\fB-c\fR
specifies to only check \fIfile\fR for errors, including syntax problems and
bad use links.  If you specify \fB-C\fR (\fB-I\fR) with this option, the code
will print warnings about entries which, after use resolution, are more than
1023 (4096) bytes long.  Due to a fixed buffer length in older termcap
libraries (and a documented limit in terminfo), these entries may cause core
dumps.
.TP
\fB-v\fR\fIn\fR
specifies that (verbose) output be written to standard error trace
information showing \fBtic\fR's progress.  The optional integer
\fIn\fR is a number from 1 to 10, inclusive, indicating the desired
level of detail of information.  If \fIn\fR is omitted, the default
level is 1.  If \fIn\fR is specified and greater than 1, the level of
detail is increased.
.TP
\fB-o\fR\fIdir\fR
Write compiled entries to given directory.  Overrides the TERMINFO environment
variable.
.TP
\fB-w\fR\fIn\fR
specifies the width of the output.
.TP
\fB-1\fR
restricts the output to a single column
.TP
\fB-T\fR
eliminates size-restrictions on the generated text.
This is mainly useful for testing and analysis, since the compiled
descriptions are limited (e.g., 1023 for termcap, 4096 for terminfo).
.TP
\fB-I\fR
Force source translation to terminfo format.
.TP
\fB-L\fR
Force source translation to terminfo format
using the long C variable names listed in <\fBterm.h\fR>
.TP
\fB-C\fR
Force source translation to termcap format.  Note: this differs from the -C
option of \fIinfocmp\fR(1m) in that it does not merely translate capability
names, but also translates terminfo strings to termcap format.  Capabilities
that are not translatable are left in the entry under their terminfo names
but commented out with two preceding dots.
.TP
\fB-N\fR
Disable smart defaults.  
Normally, when translating from termcap to terminfo, the compiler makes 
a number of assumptions about the defaults of string capabilities
\fBreset1_string\fR, \fBcarriage_return\fR, \fBcursor_left\fR, 
\fBcursor_down\fR, \fBscroll_forward\fR, \fBtab\fR, \fBnewline\fR,
\fBkey_backspace\fR, \fBkey_left\fR, and \fBkey_down\fR, then attempts
to use obsolete termcap capabilities to deduce correct values.  It also
normally suppresses output of obsolete termcap capabilities such as \fBbs\fR.
This option forces a more literal translation that also preserves the
obsolete capabilities.
.TP
\fB-R\fR\fIsubset\fR
Restrict output to a given subset.  This option is for use with archaic
versions of terminfo like those on SVr1, Ultrix, or HP/UX that don't support
the full set of SVR4/XSI Curses terminfo; and outright broken ports like AIX
that have their own extensions incompatible with SVr4/XSI.  Available subsets
are "SVr1", "Ultrix", "HP", "BSD" and "AIX"; see \fBterminfo\fR(\*n) for details.
.TP
\fI-r\fR
Force entry resolution (so there are no remaining tc capabilities) even
when doing translation to termcap format.  This may be needed if you are
preparing a termcap file for a termcap library (such as GNU termcap up
to version 1.3 or BSD termcap up to 4.3BSD) that doesn't handle multiple
tc capabilities per entry.
.TP
\fI-s\fR
Summarize the compile by showing the directory into which entries
are written, and the number of entries which are compiled.
.TP
\fI-e\fR
Limit writes and translations to the following comma-separated list of
terminals.
If any name or alias of a terminal matches one of the names in
the list, the entry will be written or translated as normal.
Otherwise no output will be generated for it.
The option value is interpreted as a file containing the list if it
contains a '/'.
(Note: depending on how tic was compiled, this option may require -I or -C.)
.TP
\fIfile\fR
contains one or more \fBterminfo\fR terminal descriptions in source
format [see \fBterminfo\fR(\*n)].  Each description in the file
describes the capabilities of a particular terminal.
.PP
The debug flag levels are as follows:
.TP
1
Names of files created and linked
.TP
2
Information related to the ``use'' facility
.TP
3
Statistics from the hashing algorithm
.TP
5
String-table memory allocations
.TP
7
Entries into the string-table
.TP
8
List of tokens encountered by scanner
.TP
9
All values computed in construction of the hash table
.LP
If n is not given, it is taken to be one.
.PP
All but one of the capabilities recognized by \fBtic\fR are documented
in \fBterminfo\fR(\*n).  The exception is the \fBuse\fR capability.

When a \fBuse\fR=\fIentry\fR-\fIname\fR field is discovered in a
terminal entry currently being compiled, \fBtic\fR reads in the binary
from \fB\*d\fR to complete the entry.  (Entries created from
\fIfile\fR will be used first.  If the environment variable
\fBTERMINFO\fR is set, that directory is searched instead of
\fB\*d\fR.)  \fBtic\fR duplicates the capabilities in
\fIentry\fR-\fIname\fR for the current entry, with the exception of
those capabilities that explicitly are defined in the current entry.

When an entry, e.g., \fBentry_name_1\fR, contains a
\fBuse=\fR\fIentry\fR_\fIname\fR_\fI2\fR field, any canceled
capabilities in \fIentry\fR_\fIname\fR_\fI2\fR must also appear in
\fBentry_name_1\fR before \fBuse=\fR for these capabilities to be
canceled in \fBentry_name_1\fR.

If the environment variable \fBTERMINFO\fR is set, the compiled
results are placed there instead of \fB\*d\fR.

Total compiled entries cannot exceed 4096 bytes.  The name field cannot
exceed 128 bytes.  Terminal names exceeding 14 characters will be
truncated to 14 characters and a warning message will be printed.
.SH COMPATIBILITY
There is some evidence that historic \fBtic\fR implementations treated
description fields with no whitespace in them as additional aliases or
short names.  This \fBtic\fR does not do that, but it does warn when
description fields may be treated that way and check them for dangerous
characters.
.SH EXTENSIONS
Unlike the stock SVr4 \fBtic\fR command, this implementation can actually
compile termcap sources.  In fact, entries in terminfo and termcap syntax can
be mixed in a single source file.  See \fBterminfo\fR(\*n) for the list of
termcap names taken to be equivalent to terminfo names.

The SVr4 manual pages are not clear on the resolution rules for \fBuse\fR
capabilities.
This implementation of \fBtic\fR will find \fBuse\fR targets anywhere
in the source file, or anywhere in the file tree rooted at \fBTERMINFO\fR (if
\fBTERMINFO\fR is defined), or in the user's \fI$HOME/.terminfo\fR directory
(if it exists), or (finally) anywhere in the system's file tree of
compiled entries.

The error messages from this \fBtic\fR have the same format as GNU C
error messages, and can be parsed by GNU Emacs's compile facility.

The -o, -I, -C, -N, -R, -h, -e, -T, -r and -s options
are not supported under SVr4.
The SVr4 -c mode does not report bad use links.

System V does not compile entries to or read entries from your
\fI$HOME/.terminfo\fR directory unless TERMINFO is explicitly set to it.
.SH FILES
.TP 5
\fB\*d/?/*\fR
Compiled terminal description database.
.SH SEE ALSO
\fBinfocmp\fR(1m), \fBcaptoinfo\fR(1m), \fBinfotocap\fR(1m), \fBtoe\fR(1m),
\fBcurses\fR(3X), \fBterminfo\fR(\*n).
.\"#
.\"# The following sets edit modes for GNU EMACS
.\"# Local Variables:
.\"# mode:nroff
.\"# fill-column:79
.\"# End: