This allows us to do soft-migration of warnings to errors; they will
now be nonfatal errors by default, but gives the user the option to
demote them.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Putting WARN_OTHER at the end of the list creates a number of
advantages and simplifications:
1. It is more user friendly! It is far more of a logical location for
the default case to be at the end of the printed list.
2. The value 0 can be used in a number of places to indicate a
non-suppressible event. By having warning_state[0] always contain
WARN_ST_ENABLED, we can always do the table lookup, even.
3. It means non-warnings (except fatal/panic) can now be conditioned
on warning states. In those cases, WARN_*, including WARN_OTHER,
can be added to the mask for any category. This is especially
useful for notes.
The only downside is that we have to explicitly detect the case where
we have ERR_WARNING but no WARN_ flag. This is a trivial test.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
The prefix ERR_WARN_ is unnecessarily long and may be a disincentive
to create new warning categories. Change it to WARN_*, it is still
plenty distinctive.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
If a label is redefined in the same pass, and the value is
inconsistent, then error out. While we are at it, give the source
location of the previous definition.
This explicitly rejects BR 3392535; there seems to be no reason to
reject duplicate definitions with the same value, as there is no
inconsistency involved.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add a new severity level "note", intended to be used to give
additional information about a previous error.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
If warnings are errors, print [-w+error=xxxx] and prefix error:.
Use the same spacing for filename and non-filename error messages.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-E -MD should work and output a dependency file.
-MD can be used without a filename; there is a default filename or
-\c{-MF} can be used.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
When we have an exact limb switch, we may end up with a case where the
value no longer has any remaining valid bits. In that case, we end up
relying on the expression *mp |= v << ms shifting the bits on the
subsequent limb all the way to zero, but that is not how real hardware
works when the shift count equals the width of the type. This is
undefined behavior and does, in fact, produce the wrong result.
Instead, change the test for limb shift to (ms < 0), meaning that we
defer the advance to the next limb until we actually need it. At that
point, change the shift into the *old* limb to have a cast to
(fp_2limb) which means the shift right of LIMB_BITS is valid and
produces a zero value as expected.
Reported-by: Brooks Moses <bmoses@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The input file is provided by nasm_error(), we should not include it
in the printf list (compiler warning + wrong message.)
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
If no output filename is specified, then a default filename is used
based on the input filename. If that ends up the *same* as the input
filename, change the output filename to "nasm.out".
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
BR 3392527: make sure that all command-line specified preprocessing
directives are processed after the system-generated ones. In
particular __OUTPUT_FORMAT__ was generated after command line pass 2,
at which point -p, -d, -u, --pragma and --before had already been
processed.
There is no reason to split up defined_macros() anymore: the right
place to execute it is simply between command line passes 1 and 2. We
can also set dfmt here, which lets us define a __DEBUG_FORMAT__ macro
as well.
Finally move some options that have no business being processed in
pass 2 to pass 1.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
There are a number of places still where we test text
data which is potentially may be an empty string. This
is known to happen on fuzzer input but usually doesn't
take place in regular valid programs. Surely we need
to revisit preprocessor code for this kind of errors.
https://bugzilla.nasm.us/show_bug.cgi?id=3392525
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
A fuzzer revealed a problem in preproc code.
https://bugzilla.nasm.us/show_bug.cgi?id=3392521
Reported-by: ganshuitao <ganshuitao@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
All include paths to nasm must already have a trailing separator
prefix which is uncommon among tools. Change to using nasm_catfile
which gives a more normal behaviour.
https://bugzilla.nasm.us/show_bug.cgi?id=3392205
Signed-off-by: night199uk <night199uk@hermitcrabslab.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
On specially crafetd malformed input file the params
might be zapped (say due to invalid syntax) so we might
access out of bound having nil dereference in best case.
Note the later code in this helper uses tok_isnt_ helper
which already has similar check.
https://bugzilla.nasm.us/show_bug.cgi?id=3392518
Reported-by: Jordan Zebor <j.zebor@f5.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
We should check for bounds when accessing nasm_reg_flags.
Seems this bug was for long time already.
https://bugzilla.nasm.us/show_bug.cgi?id=3392516
Reported-by: Jordan Zebor <j.zebor@f5.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
We already catched a case where we've missed
test for non nil label and in result got sigsegv,
lets rather panic next time.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Before the commit 81b62b9f54
we've been always putting -E,-e results into stdout if no
output file provded. So bring this backward compatibility
back.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
While configuring optimization in a level is conventional,
a certain optimization tends to conflict with some pragma.
For example, jump match conflicts with Mach-O's
"subsections-via-symbols" macro.
This configurability will workaround such conflicts.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Formatting errors -- syntax errors -- are errors, no matter which pass
they end up in. ERR_PASS1 is just plain crazy: if we end up with a
formatting error on the code-generation pass, we are in a world of
hurt.
Defer warnings to the code-generation pass; that's the pass which
matters value-wise, and that way we get the warnings in the list file,
too.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
When we suffer an underflow that cross limb boundaries, it is possible
to end up with a stack underflow. Put in an explicit check for this
case (the mantissa will be zero in this case.)
https://bugzilla.nasm.us/show_bug.cgi?id=3392445
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
diff --git a/asm/float.c b/asm/float.c
index dcf69fea..2965d3db 100644
--- a/asm/float.c
+++ b/asm/float.c
@@ -608,6 +608,8 @@ static void ieee_shr(fp_limb *mant, int i)
if (offs)
for (j = MANT_LIMBS-1; j >= offs; j--)
mant[j] = mant[j-offs];
+ } else if (MANT_LIMBS-1-offs < 0) {
+ j = MANT_LIMBS-1;
} else {
n = mant[MANT_LIMBS-1-offs] >> sr;
for (j = MANT_LIMBS-1; j > offs; j--) {
In order for the machinery that deduces memory operand sizes when they
are not provided to work correctly, we need to make sure that
MERR_OPSIZEMISSING is only issued by matches() as the last resort;
that way all other error conditions will have been filtered out and we
know at the very end if we have exactly one option left.
This is a partial revert of cd26fccab4,
but does not affect the functionality introduced by that patch.
Reported-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Add a default-off warning for phase error in pass 1. This is default
off because of the lateness in the release cycle, but cases where we
have such instability should be investigated further. For now, the
warning is here so we can debug these problems in the field.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
We don't want to lose the offset into the parent section when we
create a subsection, at least not for the MachO backend which is
currently the only user of subsections. Allow ofmt->herelabel() to set
a flag to copy the section offset from the previous section.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
We may not even have the most basic stabilization done unless we run
at least two optimization passes, e.g. in the case of subsections.
However, we cannot run more than one stabilization pass (pass0 == 1);
for one thing we'll call ofmt->symdef() multiple times on the same
symbol, which is not allowed. If we haven't achieved stability by the
time we decide to run a stabilization pass, plod on and hope for the
best.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Support the +n syntax for multiple contiguous registers, and emit it
in the output from ndisasm as well.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
We can be in absolute space and still end up with segment-relative
references. This is in fact the meaning of absolute.segment. Make
sure we define the labels appropriately.
Reported-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
If we define a label which was previously declared EXTERN, then
automatically treat is as GLOBAL.
Previously, we would fail to converge and loop forever, which is
obviously not what we want. This is more user-friendly anyway.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
If we have overridden EXTERN, then we should not call define_label()
on it again. Return a fail status from declare_label(), indicating
that the type declaration failed, but of course we don't print an
error message.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
The prefix and suffix options call perm_alloc() in labels.c, which is
not available until init_labels() have run. There is no reason not to
call init_labels() early.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
..@ labels (macro-local) are NASM specials, although not "magic": they
are explicitly defined to not preturb the local label base name.
However, they return false for both islocal() and ismagic(), so we
need to add a new function containing the correct test for when the
local label base should be advanced.
Reported-by: <balducci@units.it>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Bae, Chang Seok <chang.seok.bae@intel.com>
ofmt->symdef() always takes the mangled label name, make sure we
actually do the correct thing even for forward fixups.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
There are cases where we may want to implement generic pragmas, while
still make them selective based on output and/or debug formats.
Initially, use this for the prefix/suffix options.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Chang Seok Bae <chang.seok.bae@intel.com>
Make all limit counters 64 bits, in case someone really has a usage
for an insanely large program. The globallines limit was omitted, add
it to the list of configurable limits.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
If we allocate a new segment number, that has to cause
global_offset_changed to be incremented. Thus, we should not update
lptr->defn.segment until that would ordinarily be done.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
If a symbol is EXTERN or COMMON, then we should not keep assigning it
new segment numbers over and over. Instead, change the label code so
that it assignes a new segment value if and only if one has not been
assigned before.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
